summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)Author
2019-05-07Merge tag 'char-misc-5.2-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc update part 2 from Greg KH: "Here is the "real" big set of char/misc driver patches for 5.2-rc1 Loads of different driver subsystem stuff in here, all over the places: - thunderbolt driver updates - habanalabs driver updates - nvmem driver updates - extcon driver updates - intel_th driver updates - mei driver updates - coresight driver updates - soundwire driver cleanups and updates - fastrpc driver updates - other minor driver updates - chardev minor fixups Feels like this tree is getting to be a dumping ground of "small driver subsystems" these days. Which is fine with me, if it makes things easier for those subsystem maintainers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) intel_th: msu: Add current window tracking intel_th: msu: Add a sysfs attribute to trigger window switch intel_th: msu: Correct the block wrap detection intel_th: Add switch triggering support intel_th: gth: Factor out trace start/stop intel_th: msu: Factor out pipeline draining intel_th: msu: Switch over to scatterlist intel_th: msu: Replace open-coded list_{first,last,next}_entry variants intel_th: Only report useful IRQs to subdevices intel_th: msu: Start handling IRQs intel_th: pci: Use MSI interrupt signalling intel_th: Communicate IRQ via resource intel_th: Add "rtit" source device intel_th: Skip subdevices if their MMIO is missing intel_th: Rework resource passing between glue layers and core intel_th: SPDX-ify the documentation intel_th: msu: Fix single mode with IOMMU coresight: funnel: Support static funnel dt-bindings: arm: coresight: Unify funnel DT binding coresight: replicator: Add new device id for static replicator ...
2019-05-06Merge tag 'pm-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB) handling and expose it to user space via sysfs, fix and clean up several cpufreq drivers, add support for two new chips to the qoriq cpufreq driver, fix, simplify and clean up the cpufreq core and the schedutil governor, add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature, fix the exynos cpuidle driver and fix a couple of issues in the devfreq subsystem and clean it up. Specifics: - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel processors and expose it to user space via sysfs to avoid having to access it through the generic MSR I/F (Rafael Wysocki). - Improve the handling of global turbo changes made by the platform firmware in the intel_pstate driver (Rafael Wysocki). - Convert some slow-path static_cpu_has() callers to boot_cpu_has() in cpufreq (Borislav Petkov). - Fix the frequency calculation loop in the armada-37xx cpufreq driver (Gregory CLEMENT). - Fix possible object reference leaks in multuple cpufreq drivers (Wen Yang). - Fix kerneldoc comment in the centrino cpufreq driver (dongjian). - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan Kumar). - Add support for lx2160a and ls1028a to the qoriq cpufreq driver (Vabhav Sharma, Yuantian Tang). - Fix kobject memory leak in the cpufreq core (Viresh Kumar). - Simplify the IOwait boosting in the schedutil cpufreq governor and rework the TSC cpufreq notifier on x86 (Rafael Wysocki). - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin). - Improve the cpufreq documentation, add SPDX license tags to some PM documentation files and unify copyright notices in them (Rafael Wysocki). - Add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature (Ulf Hansson). - Rearrange the PSCI firmware support code and add support for SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla). - Improve genpd support for devices in multiple power domains (Ulf Hansson). - Unify target residency for the AFTR and coupled AFTR states in the exynos cpuidle driver (Marek Szyprowski). - Introduce new helper routine in the operating performance points (OPP) framework (Andrew-sh.Cheng). - Add support for passing on-die termination (ODT) and auto power down parameters from the kernel to Trusted Firmware-A (TF-A) to the rk3399_dmc devfreq driver (Enric Balletbo i Serra). - Add tracing to devfreq (Lukasz Luba). - Make the exynos-bus devfreq driver suspend all devices on system shutdown (Marek Szyprowski). - Fix a few minor issues in the devfreq subsystem and clean it up somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring, Saravana Kannan, Yangtao Li). - Improve system wakeup diagnostics (Stephen Boyd). - Rework filesystem sync messages emitted during system suspend and hibernation (Harry Pan)" * tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) cpufreq: Fix kobject memleak cpufreq: armada-37xx: fix frequency calculation for opp cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment cpufreq: qoriq: add support for lx2160a x86: tsc: Rework time_cpufreq_notifier() PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name() PM / Domains: Search for the CPU device outside the genpd lock PM / Domains: Drop unused in-parameter to some genpd functions PM / Domains: Use the base device for driver_deferred_probe_check_state() cpufreq: qoriq: Add ls1028a chip support PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev() PM / Domains: Don't kfree() the virtual device in the error path cpufreq: Move ->get callback check outside of __cpufreq_get() PM / Domains: remove unnecessary unlikely() cpufreq: Remove needless bios_limit check in show_bios_limit() drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning firmware/psci: add support for SYSTEM_RESET2 PM / devfreq: add tracing for scheduling work trace: events: add devfreq trace event file ...
2019-05-06Merge tag 'acpi-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These rearrange the ACPI documentation by converting it to the .rst format and splitting it into clear categories (admin guide, driver API, firmware guide), switch over multiple users of a problematic library function to a new better one, update the ACPICA code in the kernel to a new upstream release, fix a few issues, improve power device management diagnostics and do some cleanups. Specifics: - Convert the ACPI documentation in the kernel source tree to the .rst format and split it into the admin guide, driver API and firmware guide parts (Changbin Du). - Add a PRP0001 usage example to the ACPI documentation (Thomas Preston). - Switch over the users of the acpi_dev_get_first_match_name() library function which turned out to be problematic to a new, better one called acpi_dev_get_first_match_dev() (Andy Shevchenko, YueHaibing). - Update the ACPICA code in the kernel to upstream release 20190405 including: * Null pointer dereference check in acpi_ns_delete_node() (Erik Schmauss). * Multiple macro and function name changes (Bob Moore). * Predefined operation region name fix (Erik Schmauss). - Fix hibernation issue on systems using the Baytrail and Cherrytrail Intel SoCs introduced during the 4.20 development cycle (Hans de Goede). - Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui). - Fix button handling during system resume (Zhang Rui). - Add a device PM diagnostic message (Rafael Wysocki). - Clean up the code, comments and white space in multiple places (Bjorn Helgaas, Gustavo Silva, Kefeng Wang)" * tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST ...
2019-05-06Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Mostly just incremental improvements here: - Introduce AT_HWCAP2 for advertising CPU features to userspace - Expose SVE2 availability to userspace - Support for "data cache clean to point of deep persistence" (DC PODP) - Honour "mitigations=off" on the cmdline and advertise status via sysfs - CPU timer erratum workaround (Neoverse-N1 #1188873) - Introduce perf PMU driver for the SMMUv3 performance counters - Add config option to disable the kuser helpers page for AArch32 tasks - Futex modifications to ensure liveness under contention - Rework debug exception handling to seperate kernel and user handlers - Non-critical fixes and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits) Documentation: Add ARM64 to kernel-parameters.rst arm64/speculation: Support 'mitigations=' cmdline option arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB arm64: enable generic CPU vulnerabilites support arm64: add sysfs vulnerability show for speculative store bypass arm64: Fix size of __early_cpu_boot_status clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters clocksource/arm_arch_timer: Remove use of workaround static key clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable clocksource/arm_arch_timer: Direcly assign set_next_event workaround arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct ARM: vdso: Remove dependency with the arch_timer driver internals arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1 arm64: Add part number for Neoverse N1 arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32 arm64: mm: Remove pte_unmap_nested() arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable arm64: compat: Reduce address limit for 64K pages ...
2019-04-29firmware: arm_sdei: Prohibit probing in '_sdei_handler'Xiongfeng Wang
Functions called in '_sdei_handler' are needed to be marked as 'nokprobe'. Because these functions are called in NMI context and neither the arch-code's debug infrastructure nor kprobes core supports this. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-16firmware/psci: add support for SYSTEM_RESET2Sudeep Holla
PSCI v1.1 introduced SYSTEM_RESET2 to allow both architectural resets where the semantics are described by the PSCI specification itself as well as vendor-specific resets. Currently only system warm reset semantics is defined as part of architectural resets by the specification. This patch implements support for SYSTEM_RESET2 by making using of reboot_mode passed by the reboot infrastructure in the kernel. Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12drivers: firmware: psci: Announce support for OS initiated suspend modeUlf Hansson
PSCI firmware v1.0+, supports two different modes for CPU_SUSPEND. The Platform Coordinated mode, which is the default and mandatory mode, while support for the OS initiated (OSI) mode is optional. In some cases it's interesting for the user/developer to know if the OSI mode is supported by the PSCI FW, so print a message to the log if that is the case. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12drivers: firmware: psci: Simplify error path of psci_dt_init()Ulf Hansson
Instead of having each PSCI init function taking care of the of_node_put(), deal with that from psci_dt_init(), as this enables a bit simpler error path for each PSCI init function. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12drivers: firmware: psci: Split psci_dt_cpu_init_idle()Ulf Hansson
Split the psci_dt_cpu_init_idle() function into two functions. This makes the code clearer and provides better re-usability. Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12drivers: firmware: psci: Move psci to separate directoryUlf Hansson
Some following changes extends the PSCI driver with some additional files. Avoid to continue cluttering the toplevel firmware directory and first move the PSCI files into a PSCI sub-directory. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09efi/arm/arm64: Makefile: Replace -pg with CC_FLAGS_FTRACETorsten Duwe
In preparation for arm64 supporting ftrace built on other compiler options, let's have Makefiles remove the $(CC_FLAGS_FTRACE) flags, whatever these maybe, rather than assuming '-pg'. While at it, fix arm32 as well. There should be no functional change as a result of this patch. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-09ACPICA: Rename nameseg length macro/define for clarityBob Moore
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE This clarifies that this is the length of an individual nameseg, not the length of a generic namestring/namepath. Improves understanding of the code. Link: https://github.com/acpica/acpica/commit/24870bd9 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-29efi/libstub/arm: Omit unneeded stripping of ksymtab/kcrctab sectionsArd Biesheuvel
Commit f922c4abdf764 ("module: allow symbol exports to be disabled") introduced a way to inhibit generation of kcrctab/ksymtab sections when building ordinary kernel code to be used in a different execution context (decompressor, EFI stub, etc) That means we no longer have to strip those sections explicitly when building the EFI libstub objects, so drop this from the Makefile. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-6-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-29efi: Unify DMI setup code over the arm/arm64, ia64 and x86 architecturesRobert Richter
All architectures (arm/arm64, ia64 and x86) do the same here, so unify the code. Note: We do not need to call dump_stack_set_arch_desc() in case of !dmi_available. Both strings, dmi_ids_string and dump_stack_arch_ desc_str are initialized zero and thus nothing would change. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-5-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-29efi/arm: Show SMBIOS bank/device location in CPER and GHES error logsMarcin Benka
Run dmi_memdev_walk() for arch arm* as other architectures do. This improves error logging as the memory device handle is translated now to the DIMM entry's name provided by the DMI handle. Before: {1}[Hardware Error]: DIMM location: not present. DMI handle: 0x0038 After: {1}[Hardware Error]: DIMM location: N0 DIMM_A0 Signed-off-by: Marcin Benka <mbenka@marvell.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-29efi/libstub: Refactor the cmd_stubcopy Makefile commandMasahiro Yamada
It took me a while to understand what is going on in the nested if-blocks. Simplify it by removing unneeded code. - if_changed automatically adds 'set -e', so any failure in the series of commands makes it immediately fail as a whole. So, the outer if block is entirely redundant. - Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), GNU Make automatically deletes the target on any failure in its recipe. The explicit 'rm -f $@' is redundant. - Surrounding commands with ( ) will spawn a subshell to execute them in it, but it is rarely useful to do so. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190328193429.21373-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-28firmware: vpd: Drop __iomem usage for memremap() memoryStephen Boyd
memremap() doesn't return an iomem pointer, so we can just use memcpy() and drop the __iomem annotation here. This silences a sparse warning. Cc: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-12memblock: drop memblock_alloc_*_nopanic() variantsMike Rapoport
As all the memblock allocation functions return NULL in case of error rather than panic(), the duplicates with _nopanic suffix can be removed. Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Petr Mladek <pmladek@suse.com> [printk] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-10Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) arm64: mmu: drop paging_init comments arm64: debug: Ensure debug handlers check triggering exception level arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals Revert "arm64: uaccess: Implement unsafe accessors" arm64: avoid clang warning about self-assignment arm64: Kconfig.platforms: fix warning unmet direct dependencies lib/raid6: arm: optimize away a mask operation in NEON recovery routine lib/raid6: use vdupq_n_u8 to avoid endianness warnings arm64: io: Hook up __io_par() for inX() ordering riscv: io: Update __io_[p]ar() macros to take an argument asm-generic/io: Pass result of I/O accessor to __io_[p]ar() arm64: Add workaround for Fujitsu A64FX erratum 010001 arm64: Rename get_thread_info() arm64: Remove documentation about TIF_USEDFPU arm64: irqflags: Fix clang build warnings arm64: Enable the support of pseudo-NMIs arm64: Skip irqflags tracing for NMI in IRQs disabled context arm64: Skip preemption when exiting an NMI arm64: Handle serror in NMI context irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI ...
2019-03-08Merge branch 'stable/for-linus-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull ibft updates from Konrad Rzeszutek Wilk: "Two tiny fixes - a missing break, and upgrading the subsystem to use modern macros" * 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: use virt_to_phys instead of isa_virt_to_bus iscsi_ibft: Fix missing break in switch statement
2019-03-06Merge tag 'driver-core-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_<level> logging functions ...
2019-03-06Merge tag 'acpi-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are ACPICA updates including ACPI 6.3 support among other things, APEI updates including the ARM Software Delegated Exception Interface (SDEI) support, ACPI EC driver fixes and cleanups and other assorted improvements. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190215 including ACPI 6.3 support and more: * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik Schmauss). * Update of the PCC Identifier structure in PDTT (Erik Schmauss). * Support for new Generic Affinity Structure subtable in SRAT (Erik Schmauss). * New PCC operation region support (Erik Schmauss). * Support for GICC statistical profiling for MADT (Erik Schmauss). * New Error Disconnect Recover notification support (Erik Schmauss). * New PPTT Processor Structure Flags fields support (Erik Schmauss). * ACPI 6.3 HMAT updates (Erik Schmauss). * GTDT Revision 3 support (Erik Schmauss). * Legacy module-level code (MLC) support removal (Erik Schmauss). * Update/clarification of messages for control method failures (Bob Moore). * Warning on creation of a zero-length opregion (Bob Moore). * acpiexec option to dump extra info for memory leaks (Bob Moore). * More ACPI error to firmware error conversions (Bob Moore). * Debugger fix (Bob Moore). * Copyrights update (Bob Moore) - Clean up sleep states support code in ACPICA (Christoph Hellwig) - Rework in_nmi() handling in the APEI code and add suppor for the ARM Software Delegated Exception Interface (SDEI) to it (James Morse) - Fix possible out-of-bounds accesses in BERT-related core (Ross Lagerwall) - Fix the APEI code parsing HEST that includes a Deferred Machine Check subtable (Yazen Ghannam) - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files (YueHaibing) - Switch the APEI ERST code to the new generic UUID API (Andy Shevchenko) - Update the MAINTAINERS entry for APEI (Borislav Petkov) - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui) - Fix DMI checks handling in the ACPI backlight driver and add the "Lunch Box" chassis-type check to it (Hans de Goede) - Add support for using ACPI table overrides included in built-in initrd images (Shunyong Yang) - Update ACPI device enumeration to treat the PWM2 device as "always present" on Lenovo Yoga Book (Yauhen Kharuzhy) - Fix up the enumeration of device objects with the PRP0001 device ID (Andy Shevchenko) - Clean up PPTT parsing error messages (John Garry) - Clean up debugfs files creation handling (Greg Kroah-Hartman, Rafael Wysocki) - Clean up the ACPI DPTF Makefile (Masahiro Yamada)" * tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) ACPI / bus: Respect PRP0001 when retrieving device match data ACPICA: Update version to 20190215 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting ACPICA: ACPI 6.3: add GTDT Revision 3 support ACPICA: ACPI 6.3: HMAT updates ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG ACPICA: Update/clarify messages for control method failures ACPICA: Debugger: Fix possible fault with the "test objects" command ACPICA: Interpreter: Emit warning for creation of a zero-length op region ACPICA: Remove legacy module-level code support ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book ACPI / video: Extend chassis-type detection with a "Lunch Box" check ..
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-03-06Merge branch 'efi-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The main EFI changes in this cycle were: - Use 32-bit alignment for efi_guid_t - Allow the SetVirtualAddressMap() call to be omitted - Implement earlycon=efifb based on existing earlyprintk code - Various minor fixes and code cleanups from Sai, Ard and me" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Fix build error due to enum collision between efi.h and ima.h efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation x86: Make ARCH_USE_MEMREMAP_PROT a generic Kconfig symbol efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted efi: Replace GPL license boilerplate with SPDX headers efi/fdt: Apply more cleanups efi: Use 32-bit alignment for efi_guid_t efi/memattr: Don't bail on zero VA if it equals the region's PA x86/efi: Mark can_free_region() as an __init function
2019-03-04Merge branch 'acpi-apei'Rafael J. Wysocki
* acpi-apei: (29 commits) efi: cper: Fix possible out-of-bounds access ACPI: APEI: Fix possible out-of-bounds access to BERT region MAINTAINERS: Add James Morse to the list of APEI reviewers ACPI / APEI: Add support for the SDEI GHES Notification type firmware: arm_sdei: Add ACPI GHES registration helper ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry() ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length ACPI / APEI: Make GHES estatus header validation more user friendly ACPI / APEI: Pass ghes and estatus separately to avoid a later copy ACPI / APEI: Let the notification helper specify the fixmap slot ACPI / APEI: Move locking to the notification helper arm64: KVM/mm: Move SEA handling behind a single 'claim' interface KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors ACPI / APEI: Generalise the estatus queue's notify code ACPI / APEI: Don't update struct ghes' flags in read/clear estatus ACPI / APEI: Remove spurious GHES_TO_CLEAR check ...
2019-02-20efi: cper: Fix possible out-of-bounds accessRoss Lagerwall
When checking a generic status block, we iterate over all the generic data blocks. The loop condition only checks that the start of the generic data block is valid (within estatus->data_length) but not the whole block. Because the size of data blocks (excluding error data) may vary depending on the revision and the revision is contained within the data block, ensure that enough of the current data block is valid before dereferencing any members otherwise an out-of-bounds access may occur if estatus->data_length is invalid. This relies on the fact that struct acpi_hest_generic_data_v300 is a superset of the earlier version. Also rework the other checks to avoid potential underflow. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Borislav Petkov <bp@suse.de> Tested-by: Tyler Baicar <baicar.tyler@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-17Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "This tree reverts a GICv3 commit (which was broken) and fixes it in another way, by adding a memblock build-time entries quirk for ARM64" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm: Revert "Defer persistent reservations until after paging_init()" arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
2019-02-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Three changes: - An UV fix/quirk to pull UV BIOS calls into the efi_runtime_lock locking regime. (This done by aliasing __efi_uv_runtime_lock to efi_runtime_lock, which should make the quirk nature obvious and maintain the general policy that the EFI lock (name...) isn't exposed to drivers.) - Our version of MAGA: Make a.out Great Again. - Add a new Intel model name enumerator to an upstream header to help reduce dependencies going forward" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls x86/CPU: Add Icelake model number x86/a.out: Clear the dump structure initially
2019-02-16efi/arm: Revert "Defer persistent reservations until after paging_init()"Ard Biesheuvel
This reverts commit eff896288872d687d9662000ec9ae11b6d61766f, which deferred the processing of persistent memory reservations to a point where the memory may have already been allocated and overwritten, defeating the purpose. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190215123333.21209-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-16efi: Fix build error due to enum collision between efi.h and ima.hAnders Roxell
The following commit: a893ea15d764 ("tpm: move tpm_chip definition to include/linux/tpm.h") introduced a build error when both IMA and EFI are enabled: In file included from ../security/integrity/ima/ima_fs.c:30: ../security/integrity/ima/ima.h:176:7: error: redeclaration of enumerator "NONE" What happens is that both headers (ima.h and efi.h) defines the same 'NONE' constant, and it broke when they started getting included from the same file: Rework to prefix the EFI enum with 'EFI_*'. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190215165551.12220-2-ard.biesheuvel@linaro.org [ Cleaned up the changelog a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-15Merge tag 'drivers_soc_for_5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers soc: ti: couple of non critical fixes for v5.1 - Fix the Clang warning for enum in Navigator dma - Simplify code in ti_sci with DEFINE_SHOW_ATTRIBUTE macro * tag 'drivers_soc_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: knav_dma: Use proper enum in pktdma_init_chan firmware: ti_sci: Change to use DEFINE_SHOW_ATTRIBUTE macro Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann
into arm/drivers This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes for 5.1, please pull the following: - Stefan updates the BCM2835 SoC driver with downstream properties and uses that to implement a reboot notifier to tell the VC4 firmware when Linux on the ARM CPU is rebooting - Eric adds a proper power domain driver for the BCM283x SoCs and updates a bunch of drivers to have a better and clearer Device Tree definition to support power domains/breaking up of functionality. This requires converting the existing watchdog driver into a MFD and then breaking up the functionality into separate drivers and finally updating the DTS files to leverage the power domains information. - Wei provides a fix for making a symbol static * tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux: ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware. ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4) soc: bcm: bcm2835-pm: Make local symbol static soc: bcm: Make PM driver default for BCM2835 soc: bcm: bcm2835-pm: Add support for power domains under a new binding. bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD. dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4) firmware: raspberrypi: notify VC4 firmware of a reboot soc: bcm2835: sync firmware properties with downstream Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'tegra-for-5.1-firmware' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers firmware: tegra: Changes for v5.1-rc1 These changes add support for BPMP on Tegra210. * tag 'tegra-for-5.1-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware/tegra: Enable Tegra186 BPMP support on Tegra194 firmware: tegra: Conditionally support SoC generations firmware: tegra: bpmp-tegra186: Remove unused includes firmware: tegra: add bpmp driver for Tegra210 firmware: tegra: Refactor BPMP driver firmware: tegra: Reword messaging terminology Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge tag 'imx-drivers-5.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.1: - Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is going to be used on more SoCs than just i.MX8MQ. - Add power domain information into SCU bindings document. - Add support of start/stop a CPU into imx firmware driver. - Support multiple address ranges per child node for imx-weim bus driver. * tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: Add support to start/stop a CPU soc: imx: Break dependency on SOC_IMX8MQ for GPCv2 firmware: imx: scu-pd: add fallback compatible string support dt-bindings: fsl: scu: add imx8qm scu power domain support dt-bindings: fsl: scu: add fallback compatible string for power domain bus: imx-weim: guard against timing configuration conflicts bus: imx-weim: support multiple address ranges per child node dt-bindings: bus: imx-weim: document multiple address ranges per child node soc: imx: gpcv2: handle reset clocks soc: imx: gpcv2: handle additional power-down bits in handshake register Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15x86/platform/UV: Use efi_runtime_lock to serialise BIOS callsHedi Berriche
Calls into UV firmware must be protected against concurrency, expose the efi_runtime_lock to the UV platform, and use it to serialise UV BIOS calls. Signed-off-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Russ Anderson <rja@hpe.com> Reviewed-by: Dimitri Sivanich <sivanich@hpe.com> Reviewed-by: Mike Travis <mike.travis@hpe.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: platform-driver-x86@vger.kernel.org Cc: stable@vger.kernel.org # v4.9+ Cc: Steve Wahl <steve.wahl@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.com
2019-02-12iscsi_ibft: use virt_to_phys instead of isa_virt_to_busChristoph Hellwig
As far as I can tell IBFT is a firmware table and has nothing to do with the good old ISA bus. And even if it the two would be the same on x86 anyway. So remove the isa_virt_to_bus call in preparation of eventually removing that API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-12iscsi_ibft: Fix missing break in switch statementGustavo A. R. Silva
Add missing break statement in order to prevent the code from falling through to case ISCSI_BOOT_TGT_NAME, which is unnecessary. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-02-12drivers: soc: xilinx: Add ZynqMP power domain driverJolly Shah
The zynqmp-genpd driver communicates the usage requirements for logical power domains / devices to the platform FW. FW is responsible for choosing appropriate power states, taking Linux' usage information into account. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-12firmware: xilinx: Add APIs to control node status/powerRajan Vaja
Add Xilinx ZynqMP firmware APIs to control node status and power. These APIs allows turning on/off power domain and setting capabilities of devices present in power domain. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-12firmware: xilinx: Implement ZynqMP power management APIsJolly Shah
Add Xilinx ZynqMP firmware APIs to set suspend mode and inform firmware that master has initialized its own power management. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-11firmware: arm_sdei: Add ACPI GHES registration helperJames Morse
APEI's Generic Hardware Error Source structures do not describe whether the SDEI event is shared or private, as this information is discoverable via the API. GHES needs to know whether an event is normal or critical to avoid sharing locks or fixmap entries, but GHES shouldn't have to know about the SDEI API. Add a helper to register the GHES using the appropriate normal or critical callback. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-11Merge 5.0-rc6 into driver-core-nextGreg Kroah-Hartman
We need the debugfs fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11firmware: imx: Add support to start/stop a CPUDaniel Baluta
This is done via RPC call to SCU. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-02-08Merge tag 'armsoc-fixes-5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a bit larger than normal, as we had not managed to send out a pull request before traveling for a week without my signing key. There are multiple code fixes for older bugs, all of which should get backported into stable kernels: - tango: one fix for multiplatform configurations broken on other platforms when tango is enabled - arm_scmi: device unregistration fix - iop32x: fix kernel oops from extraneous __init annotation - pxa: remove a double kfree - fsl qbman: close an interrupt clearing race The rest is the usual collection of smaller fixes for device tree files, on the renesas, allwinner, meson, omap, davinci, qualcomm and imx platforms. Some of these are for compile-time warnings, most are for board specific functionality that fails to work because of incorrect settings" * tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: tango: Improve ARCH_MULTIPLATFORM compatibility firmware: arm_scmi: provide the mandatory device release callback ARM: iop32x/n2100: fix PCI IRQ mapping arm64: dts: add msm8996 compatible to gicv3 ARM: dts: am335x-shc.dts: fix wrong cd pin level ARM: dts: n900: fix mmc1 card detect gpio polarity ARM: dts: omap3-gta04: Fix graph_port warning ARM: pxa: ssp: unneeded to free devm_ allocated data ARM: dts: r8a7743: Convert to new LVDS DT bindings soc: fsl: qbman: avoid race in clearing QMan interrupt arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 ARM: dts: da850: fix interrupt numbers for clocksource dt-bindings: imx8mq: Number clocks consecutively arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: imx6sx: correct backward compatible of gpt ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3 ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ...
2019-02-07firmware/tegra: Enable Tegra186 BPMP support on Tegra194Thierry Reding
The BPMP implementation on Tegra194 is mostly compatible with the implementation on Tegra186, so make sure the latter is available when support for Tegra194 is enabled. Suggested-by: Timo Alho <talho@nvidia.com> Reviewed-by: Timo Alho <talho@nvidia.com> Tested-by: Timo Alho <talho@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-02-07firmware: tegra: Conditionally support SoC generationsThierry Reding
Only include support for Tegra210 and Tegra186 in the BPMP driver if support for those SoCs was selected. This fixes a build failure seen on 32-bit ARM allmodconfig builds, but could also happen on 64-bit ARM builds if either Tegra210 or Tegra186 were not selected. Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Timo Alho <talho@nvidia.com> Tested-by: Timo Alho <talho@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-02-06efi: Let architectures decide the flags that should be saved/restoredJulien Thierry
Currently, irqflags are saved before calling runtime services and checked for mismatch on return. Provide a pair of overridable macros to save and restore (if needed) the state that need to be preserved on return from a runtime service. This allows to check for flags that are not necesarly related to irqflags. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: linux-efi@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-02-05firmware: xilinx: Add zynqmp_pm_get_chipid() APINava kishore Manne
This patch adds a new API to provide access to the hardware related data like soc revision, IDCODE... etc. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-04efi/arm: Don't expect a return value of ptdump_debugfs_registerNathan Chancellor
As of commit e2a2e56e4082 ("arm64: dump: no need to check return value of debugfs_create functions") in the arm64 for-next/core branch, ptdump_debugfs_register does not have a return value, which causes a build error here: drivers/firmware/efi/arm-runtime.c:51:9: error: returning 'void' from a function with incompatible result type 'int' return ptdump_debugfs_register(&efi_ptdump_info, "efi_page_tables"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. The arm version is still awaiting acceptance [1] but in anticipation of that patch being merged, restructure this function to call ptdump_debugfs_register without expecting a return value. [1]: https://lore.kernel.org/lkml/20190122144114.9816-3-gregkh@linuxfoundation.org/ Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-02-04efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementationArd Biesheuvel
Move the x86 EFI earlyprintk implementation to a shared location under drivers/firmware and tweak it slightly so we can expose it as an earlycon implementation (which is generic) rather than earlyprintk (which is only implemented for a few architectures) This also involves switching to write-combine mappings by default (which is required on ARM since device mappings lack memory semantics, and so memcpy/memset may not be used on them), and adding support for shared memory framebuffers on cache coherent non-x86 systems (which do not tolerate mismatched attributes). Note that 32-bit ARM does not populate its struct screen_info early enough for earlycon=efifb to work, so it is disabled there. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Alexander Graf <agraf@suse.de> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190202094119.13230-10-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>