| Age | Commit message (Collapse) | Author |
|---|
|
When the raw support is enabled and configured in co-existence mode the
normal SCMI drivers are allowed to register with the SCMI core and
operate as usual alongside the raw operations.
SCMI normal and raw messages will be kept segregated from each other,
but only at the transaction level. Any further possible interference at
the protocol layer will have instead to be handled by the user to attain
reliable results while using the raw transactions.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-17-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a few call sites where, if SCMI raw mode access had been enabled in
Kconfig, the needed SCMI raw initialization and hooks are called.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-16-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Reject SCMI driver registration when SCMI raw mode support is configured,
so as to avoid interferences between the SCMI raw mode transactions and the
normal SCMI stack operations.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-15-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add SCMI raw mode support which exposes a userspace interface to allow for
bare SCMI command injection and snooping from userspace.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-13-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Create a common SCMI debugfs root directory and populate it with some
common SCMI data for each discovered SCMI platform instance if SCMI
debugfs is needed by any configured SCMI facility.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-11-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add the channel and platform instance indentifier to SCMI message dump
traces in order to easily associate message flows to specific transport
channels.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-9-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a couple of unique identifiers to channel and platform instance
descriptors in order to emit more descriptive message dump traces.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-8-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Move SCMI error codes definitions and helper to the common.h header
together with the delayed response timeout define.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-7-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a few SCMI helpers useful to implement SCMI raw access support.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a 'flags' field to xfer and define a flagbit and related macro to easily
identify xfers originated from the raw transmissions.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Refactor scmi_wait_for_message_response() to use a internal helper to
carry out its main duties; while doing that make it accept directly an
scmi_desc parameter to interact with the configured transport.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Refactor polling helpers to receive scmi_desc directly as a parameter and
move all of them to common.h.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Move the whole xfer in-flight registration process out of scmi_xfer_get
and while at that, split the sequence number selection steps from the
in-flight registration procedure itself.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make the SCMI bus on its own as a distinct module initialized at
subsys_initcall level when builtin.
Keep the SCMI driver core stack, together with any configured transport,
in a different module initialized as module_init level.
SCMI drivers initialization remain unchanged at module_init level.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-10-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Protocol devices are created or destroyed depending on the related device
request/unrequest events emitted on the scmi_requested_devices_nh
notification chain by the SCMI bus and served in the driver by the
scmi_device_request_notifier.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-9-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Refactor SCMI device create/destroy helpers: it is now possible to ask
for the creation of all the currently requested devices for a whole
protocol, not only for the creation of a single well-defined device.
While at that, re-instate uniqueness checks on the creation of SCMI
SystemPower devices.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-8-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Move handle get/set helpers definitions into driver.c and invoke them
through the bus notifier helper.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-7-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Move protocol device request helpers from driver.c compilation unit to
bus.c, so reducing the cross interactions between driver.c and bus.c.
Get rid of old protocol device creation process as a whole from driver.c
and remove also stale SCMI system power unicity checks.
While at that make such helpers call into scmi_requested_devices_nh
notification chain.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add a pair of notifier chains and generic empty notifier callbacks.
Currently they are still unused but they will be used to act properly
on device request and creation events.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Move protocol registration helpers and logic out of bus.c compilation
unit into driver.c.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Refactor channels initialization to use dedicated transport devices
instead of using devices borrowed from the SCMI drivers.
Initialize all channels, as described in the device tree, upfront during
SCMI core stack probe phase and free all of them, including the underlying
devices, when the SCMI core is removed.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
SCMI transport operation .chan_available determines in a transport
specific way if an SCMI channel is still available and to be configured.
Such information is derived by analyzing bits of device node in a
transport specific way, all it needs is a device node to operate up on,
not necessarily a full blown device.
Simplify the helper to receive in input a reference to a device_node
instead of a device carrying a pointer to such device_node.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222185049.737625-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When the firmware (FW) supports multiple requests per VM, multiple requests
from the same/different VM can reach the firmware at the same time. Since
the firmware currently being used has limited resources, it guards them
with a resource lock and puts requests on a wait-queue internally and
signals to HLOS that it is doing so. It does this by returning a new return
value in addition to success or error: SCM_WAITQ_SLEEP. A sleeping SCM call
can be woken up by an interrupt that the FW raises.
1) SCM_WAITQ_SLEEP:
When an SCM call receives this return value instead of success
or error, FW has placed this call on a wait-queue and has signalled
HLOS to put it to non-interruptible sleep.
Along with this return value, FW also passes to HLOS `wq_ctx` -
a unique number (UID) identifying the wait-queue that it has put
the call on, internally. This is to help HLOS with its own
bookkeeping to wake this sleeping call later.
Additionally, FW also passes to HLOS `smc_call_ctx` - a UID
identifying the SCM call thus being put to sleep. This is also
for HLOS' bookkeeping to wake this call up later.
These two additional values are passed via the a1 and a2
registers.
N.B.: The "ctx" in the above UID names = "context".
The handshake mechanism that HLOS uses to talk to FW about wait-queue
operations involves two new SMC calls.
1) get_wq_ctx():
Arguments: None
Returns: wq_ctx, flags, more_pending
Get the wait-queue context, and wake up either one or all of the
sleeping SCM calls associated with that wait-queue.
Additionally, repeat this if there are more wait-queues that are
ready to have their requests woken up (`more_pending`).
2) wq_resume(smc_call_ctx):
Arguments: smc_call_ctx
HLOS needs to issue this in response to receiving an
IRQ, passing to FW the same smc_call_ctx that FW
receives from HLOS via the get_wq_ctx() call.
(The mechanism to wake a SMC call back up is described in detail below)
VM_1 VM_2 Firmware
│ │ │
│ │ │
│ │ │
│ │ │
│ REQUEST_1 │ │
├────────────────────────┼─────────────────────────────────┤
│ │ │
│ │ ┌──┼──┐
│ │ │ │ │
│ │ REQUEST_2 │ │ │
│ ├──────────────────────────────┼──┤ │
│ │ │ │ │Resource
│ │ │ │ │is busy
│ │ {WQ_SLEEP} │ │ │
│ │◄─────────────────────────────┼──┤ │
│ │ wq_ctx, smc_call_ctx │ │ │
│ │ └──┼──┘
│ REQUEST_1 COMPLETE │ │
│◄───────────────────────┼─────────────────────────────────┤
│ │ │
│ │ IRQ │
│ │◄─-------------------------------│
│ │ │
│ │ get_wq_ctx() │
│ ├────────────────────────────────►│
│ │ │
│ │ │
│ │◄────────────────────────────────┤
│ │ wq_ctx, flags, and │
│ │ more_pending │
│ │ │
│ │ │
│ │ wq_resume(smc_call_ctx) │
│ ├────────────────────────────────►│
│ │ │
│ │ │
│ │ REQUEST_2 COMPLETE │
│ │◄────────────────────────────────┤
│ │ │
│ │ │
With the exception of get_wq_ctx(), the other SMC call wq_resume() can
return WQ_SLEEP (these nested rounds of WQ_SLEEP are not shown in the
above diagram for the sake of simplicity). Therefore, introduce a new
do-while loop to handle multiple WQ_SLEEP return values for the same
parent SCM call.
Request Completion in the above diagram refers to either a success
return value (zero) or error (and not SMC_WAITQ_SLEEP)
Also add the interrupt handler that wakes up a sleeping SCM call.
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113161114.22607-3-quic_sibis@quicinc.com
|
|
The recent cpuidle changes started triggering RCU splats on
Juno development boards:
| =============================
| WARNING: suspicious RCU usage
| -----------------------------
| include/trace/events/ipi.h:19 suspicious rcu_dereference_check() usage!
Fix cpuidle on ARM64:
- ... by introducing a new 'is_rcu' flag to the cpuidle helpers & make
ARM64 use it, as ARM64 wants to keep RCU active longer and wants to
do the ct_cpuidle_enter()/exit() dance itself.
- Also update the PSCI driver accordingly.
- This also removes the last known RCU_NONIDLE() user as a bonus.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/Y8Z31UbzG3LJgAXE@hirez.programming.kicks-ass.net
--
|
|
For consistency with the new efivar_is_available() function, change the
return type of efivar_supports_writes() to bool.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Since commit 0f5b2c69a4cb ("efi: vars: Remove deprecated 'efivars' sysfs
interface") and the removal of the sysfs interface there are no users of
the efivars kobject.
Drop the kobject argument from efivars_register() and add a new
efivar_is_available() helper in favour of the old efivars_kobject().
Note that the new helper uses the prefix 'efivar' (i.e. without an 's')
for consistency with efivar_supports_writes() and the rest of the
interface (except the registration functions).
For the benefit of drivers with optional EFI support, also provide a
dummy implementation of efivar_is_available().
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI hash randomization with KASAN (Sami Tolvanen)
- Check size of coreboot table entry and use flex-array
* tag 'hardening-v6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Fix CFI hash randomization with KASAN
firmware: coreboot: Check size of table entry and use flex-array
|
|
The memcpy() of the data following a coreboot_table_entry couldn't
be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it
easier to reason about, add an explicit flexible array member to struct
coreboot_device so the entire entry can be copied at once. Additionally,
validate the sizes before copying. Avoids this run-time false positive
warning:
memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8)
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/all/03ae2704-8c30-f9f0-215b-7cdf4ad35a9a@molgen.mpg.de/
Cc: Jack Rosenthal <jrosenth@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230107031406.gonna.761-kees@kernel.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Link: https://lore.kernel.org/r/20230112230312.give.446-kees@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- avoid a potential crash on the efi_subsys_init() error path
- use more appropriate error code for runtime services calls issued
after a crash in the firmware occurred
- avoid READ_ONCE() for accessing firmware tables that may appear
misaligned in memory
* tag 'efi-fixes-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: tpm: Avoid READ_ONCE() for accessing the event log
efi: rt-wrapper: Add missing include
efi: fix userspace infinite retry read efivars after EFI runtime services page fault
efi: fix NULL-deref in init error path
|
|
Use NULL for NULL pointer to fix the following sparse warning:
drivers/firmware/meson/meson_sm.c:85:24: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230110031242.4917-1-miles.chen@mediatek.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Currently the scroll copies the full screen which is slow on high
resolution displays. At the same time, most of the screen is an empty
space which has no need to be copied over and over.
Optimize the scrolling algorithm by caching the x coordinates of the
last printed lines and scroll in accordance with the maximum x in that
cache.
On my Microsoft Surface Book (the first version) this produces a
significant speedup of the console 90 seconds vs. 168 seconds with the
kernel command line having
ignore_loglevel earlycon=efifb keep_bootcon
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
strnchrnul() can be called in the early stages. Replace
open coded variant in the EFI early console driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Contrary to popular belief, PSCI is not a universal property of an
ARM/arm64 system. There is a garden variety of systems out there
that don't (or even cannot) implement it.
I'm the first one deplore such a situation, but hey...
On such systems, a "cat /sys/kernel/debug/psci" results in
fireworks, as no invocation callback is registered.
Check for the invoke_psci_fn and psci_ops.get_version pointers
before registering with the debugfs subsystem, avoiding the
issue altogether.
Fixes: 3137f2e60098 ("firmware/psci: Add debugfs support to ease debugging")
Reported-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230105090834.630238-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In case the tap delay required by Arasan SDHCI is set to 0, the current
embeddedsw firmware unconditionally writes IOU_SLCR SD_ITAPDLY to 0x100
(SD0_ITAPDLYENA=1, SD0_ITAPDLYSEL=0). Previous behavior was to keep the
IOU_SLCR SD_ITAPDLY set to 0x0. There is some sort of difference in the
behavior between SD0_ITAPDLYENA=1/0 with the same SD0_ITAPDLYSEL=0, even
though the behavior should be identical -- zero delay added to rxclk_in
line. The former breaks HS200 training in low temperature conditions.
Write IOU_SLCR SD_ITAPDLY register to 0 using PM_MMIO_WRITE which seem
to allow unrestricted WRITE access (and PM_MMIO_READ which allows read
access) to the entire address space. This way, it is possible to work
around the defect in IOCTL_SET_SD_TAPDELAY design which does not permit
clearing SDx_ITAPDLYENA bit.
Note that the embeddedsw firmware does not permit clearing the SD_ITAPDLY
SD0_ITAPDLYENA bit, this bit can only ever be set by the firmware and it
is often impossible to update the possibly broken firmware.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20221215152023.8387-1-marex@denx.de
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
When unloading the SCMI core stack module, configured to use the virtio
SCMI transport, LOCKDEP reports the splat down below about unsafe locks
dependencies.
In order to avoid this possible unsafe locking scenario call upfront
virtio_break_device() before getting hold of vioch->lock.
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
6.1.0-00067-g6b934395ba07-dirty #4 Not tainted
-----------------------------------------------------
rmmod/307 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffff000080c510e0 (&dev->vqs_list_lock){+.+.}-{3:3}, at: virtio_break_device+0x28/0x68
and this task is already holding:
ffff00008288ada0 (&channels[i].lock){-.-.}-{3:3}, at: virtio_chan_free+0x60/0x168 [scmi_module]
which would create a new lock dependency:
(&channels[i].lock){-.-.}-{3:3} -> (&dev->vqs_list_lock){+.+.}-{3:3}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&channels[i].lock){-.-.}-{3:3}
... which became HARDIRQ-irq-safe at:
lock_acquire+0x128/0x398
_raw_spin_lock_irqsave+0x78/0x140
scmi_vio_complete_cb+0xb4/0x3b8 [scmi_module]
vring_interrupt+0x84/0x120
vm_interrupt+0x94/0xe8
__handle_irq_event_percpu+0xb4/0x3d8
handle_irq_event_percpu+0x20/0x68
handle_irq_event+0x50/0xb0
handle_fasteoi_irq+0xac/0x138
generic_handle_domain_irq+0x34/0x50
gic_handle_irq+0xa0/0xd8
call_on_irq_stack+0x2c/0x54
do_interrupt_handler+0x8c/0x90
el1_interrupt+0x40/0x78
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x64/0x68
_raw_write_unlock_irq+0x48/0x80
ep_start_scan+0xf0/0x128
do_epoll_wait+0x390/0x858
do_compat_epoll_pwait.part.34+0x1c/0xb8
__arm64_sys_epoll_pwait+0x80/0xd0
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.3+0x98/0x120
do_el0_svc+0x34/0xd0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
to a HARDIRQ-irq-unsafe lock:
(&dev->vqs_list_lock){+.+.}-{3:3}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0x128/0x398
_raw_spin_lock+0x58/0x70
__vring_new_virtqueue+0x130/0x1c0
vring_create_virtqueue+0xc4/0x2b8
vm_find_vqs+0x20c/0x430
init_vq+0x308/0x390
virtblk_probe+0x114/0x9b0
virtio_dev_probe+0x1a4/0x248
really_probe+0xc8/0x3a8
__driver_probe_device+0x84/0x190
driver_probe_device+0x44/0x110
__driver_attach+0x104/0x1e8
bus_for_each_dev+0x7c/0xd0
driver_attach+0x2c/0x38
bus_add_driver+0x1e4/0x258
driver_register+0x6c/0x128
register_virtio_driver+0x2c/0x48
virtio_blk_init+0x70/0xac
do_one_initcall+0x84/0x420
kernel_init_freeable+0x2d0/0x340
kernel_init+0x2c/0x138
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->vqs_list_lock);
local_irq_disable();
lock(&channels[i].lock);
lock(&dev->vqs_list_lock);
<Interrupt>
lock(&channels[i].lock);
*** DEADLOCK ***
================
Fixes: 42e90eb53bf3f ("firmware: arm_scmi: Add a virtio channel refcount")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
A misbheaving SCMI platform firmware could reply with out-of-spec
notifications, shorter than the mimimum size comprising a header.
Fixes: d5141f37c42e ("firmware: arm_scmi: Add notifications support in transport layer")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
A misbheaving SCMI platform firmware could reply with out-of-spec messages,
shorter than the mimimum size comprising a header and a status field.
Harden shmem_fetch_response to properly truncate such a bad messages.
Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Stale error status reported from a previous message transaction must be
cleared before starting a new transaction to avoid being confusingly
reported in the following SCMI message dump traces.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Select color format for EFI/VESA firmware scanout buffer from the
number of bits per pixel and the position of the individual color
components. Fixes the selected format for the buffer in several odd
cases. For example, XRGB1555 has been reported as ARGB1555 because
of the different use of depth and transparency in VESA and Linux.
Bits-per-pixel is always the pixel's raw number of bits; including
alpha and filler bits. It is preferred over color depth, which has a
different meaning among various components and standards.
Also do not compare reserved bits and transparency bits to each other.
These values have different meanings, as reserved bits include filler
bits while transparency does not.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-2-tzimmermann@suse.de
|
|
page fault
After [1][2], if we catch exceptions due to EFI runtime service, we will
clear EFI_RUNTIME_SERVICES bit to disable EFI runtime service, then the
subsequent routine which invoke the EFI runtime service should fail.
But the userspace cat efivars through /sys/firmware/efi/efivars/ will stuck
and infinite loop calling read() due to efivarfs_file_read() return -EINTR.
The -EINTR is converted from EFI_ABORTED by efi_status_to_err(), and is
an improper return value in this situation, so let virt_efi_xxx() return
EFI_DEVICE_ERROR and converted to -EIO to invoker.
Cc: <stable@vger.kernel.org>
Fixes: 3425d934fc03 ("efi/x86: Handle page faults occurring while running EFI runtime services")
Fixes: 23715a26c8d8 ("arm64: efi: Recover from synchronous exceptions occurring in firmware")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In cases where runtime services are not supported or have been disabled,
the runtime services workqueue will never have been allocated.
Do not try to destroy the workqueue unconditionally in the unlikely
event that EFI initialisation fails to avoid dereferencing a NULL
pointer.
Fixes: 98086df8b70c ("efi: add missed destroy_workqueue when efisubsys_init fails")
Cc: stable@vger.kernel.org
Cc: Li Heng <liheng40@huawei.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
|
|
Do not try to refresh the RNG seed in case the firmware does not support
setting variables.
This is specifically needed to prevent a NULL-pointer dereference on the
Lenovo X13s with some firmware revisions, or more generally, whenever
the runtime services have been disabled (e.g. efi=noruntime or with
PREEMPT_RT).
Fixes: e7b813b32a42 ("efi: random: refresh non-volatile random seed when RNG is initialized")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reported-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Optimise away self-test overhead when they are disabled
- Support symmetric encryption via keyring keys in af_alg
- Flip hwrng default_quality, the default is now maximum entropy
Algorithms:
- Add library version of aesgcm
- CFI fixes for assembly code
- Add arm/arm64 accelerated versions of sm3/sm4
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned
- Fix selftest failures in rockchip
- Add support for RK3328/RK3399 in rockchip
- Add deflate support in qat
- Merge ux500 into stm32
- Add support for TEE for PCI ID 0x14CA in ccp
- Add mt7986 support in mtk
- Add MaxLinear platform support in inside-secure
- Add NPCM8XX support in npcm"
* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
crypto: ux500/cryp - delete driver
crypto: stm32/cryp - enable for use with Ux500
crypto: stm32 - enable drivers to be used on Ux500
dt-bindings: crypto: Let STM32 define Ux500 CRYP
hwrng: geode - Fix PCI device refcount leak
hwrng: amd - Fix PCI device refcount leak
crypto: qce - Set DMA alignment explicitly
crypto: octeontx2 - Set DMA alignment explicitly
crypto: octeontx - Set DMA alignment explicitly
crypto: keembay - Set DMA alignment explicitly
crypto: safexcel - Set DMA alignment explicitly
crypto: hisilicon/hpre - Set DMA alignment explicitly
crypto: chelsio - Set DMA alignment explicitly
crypto: ccree - Set DMA alignment explicitly
crypto: ccp - Set DMA alignment explicitly
crypto: cavium - Set DMA alignment explicitly
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
crypto: arm64/ghash-ce - use frame_push/pop macros consistently
crypto: arm64/crct10dif - use frame_push/pop macros consistently
crypto: arm64/aes-modes - use frame_push/pop macros consistently
...
|
|
Pull ARM updates from Russell King:
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer, removal of
lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: 9279/1: support function error injection
ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
ARM: 9276/1: Refactor dump_instr()
ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
ARM: 9267/1: Define Armv8 registers in AArch32 state
ARM: findbit: add unwinder information
ARM: findbit: operate by words
ARM: findbit: convert to macros
ARM: findbit: provide more efficient ARMv7 implementation
ARM: findbit: document ARMv5 bit offset calculation
ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
ARM: 9265/1: pass -march= only to compiler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Borislav Petkov:
"A of early boot cleanups and fixes.
- Do some spring cleaning to the compressed boot code by moving the
EFI mixed-mode code to a separate compilation unit, the AMD memory
encryption early code where it belongs and fixing up build
dependencies. Make the deprecated EFI handover protocol optional
with the goal of removing it at some point (Ard Biesheuvel)
- Skip realmode init code on Xen PV guests as it is not needed there
- Remove an old 32-bit PIC code compiler workaround"
* tag 'x86_boot_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Remove x86_32 PIC using %ebx workaround
x86/boot: Skip realmode init code when running as Xen PV guest
x86/efi: Make the deprecated EFI handover protocol optional
x86/boot/compressed: Only build mem_encrypt.S if AMD_MEM_ENCRYPT=y
x86/boot/compressed: Adhere to calling convention in get_sev_encryption_bit()
x86/boot/compressed: Move startup32_check_sev_cbit() out of head_64.S
x86/boot/compressed: Move startup32_check_sev_cbit() into .text
x86/boot/compressed: Move startup32_load_idt() out of head_64.S
x86/boot/compressed: Move startup32_load_idt() into .text section
x86/boot/compressed: Pull global variable reference into startup32_load_idt()
x86/boot/compressed: Avoid touching ECX in startup32_set_idt_entry()
x86/boot/compressed: Simplify IDT/GDT preserve/restore in the EFI thunk
x86/boot/compressed, efi: Merge multiple definitions of image_offset into one
x86/boot/compressed: Move efi32_pe_entry() out of head_64.S
x86/boot/compressed: Move efi32_entry out of head_64.S
x86/boot/compressed: Move efi32_pe_entry into .text section
x86/boot/compressed: Move bootargs parsing out of 32-bit startup code
x86/boot/compressed: Move 32-bit entrypoint code into .text section
x86/boot/compressed: Rename efi_thunk_64.S to efi-mixed.S
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
|
