summaryrefslogtreecommitdiff
path: root/drivers/fpga/Makefile
AgeCommit message (Collapse)Author
2020-04-28fpga: dfl: fme: add performance reporting supportWu Hao
This patch adds support for performance reporting private feature for FPGA Management Engine (FME). Now it supports several different performance counters, including 'basic', 'cache', 'fabric', 'vtd' and 'vtd_sip'. It allows user to use standard linux tools to access these performance counters. e.g. List all events by "perf list" perf list | grep fme dfl_fme0/cache_read_hit/ [Kernel PMU event] dfl_fme0/cache_read_miss/ [Kernel PMU event] ... dfl_fme0/fab_mmio_read/ [Kernel PMU event] dfl_fme0/fab_mmio_write/ [Kernel PMU event] ... dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event] dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event] ... dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event] dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event] ... dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event] dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event] ... dfl_fme0/clock [Kernel PMU event] ... e.g. check increased counter value after run one application using "perf stat" command. perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test Performance counter stats for './test': 1 dfl_fme0/fab_mmio_read/ 2 dfl_fme0/fab_mmio_write/ 1.009496520 seconds time elapsed Please note that fabric counters support both fab_* and fab_port_*, but actually they are sharing one set of performance counters in hardware. If user wants to monitor overall data events on fab_* then fab_port_* can't be supported at the same time, see example below: perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/ Performance counter stats for 'system wide': 0 dfl_fme0/fab_mmio_read/ <not supported> dfl_fme0/fab_port_mmio_write,portid=0/ 2.141064085 seconds time elapsed Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03fpga: dfl: fme: add global error reporting supportWu Hao
This patch adds support for global error reporting for FPGA Management Engine (FME), it introduces sysfs interfaces to report different error detected by the hardware, and allow user to clear errors or inject error for testing purpose. Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2019-09-03fpga: dfl: afu: add error reporting support.Wu Hao
Error reporting is one important private feature, it reports error detected on port and accelerated function unit (AFU). It introduces several sysfs interfaces to allow userspace to check and clear errors detected by hardware. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2019-04-15fpga manager: Adding FPGA Manager support for Xilinx zynqmpNava kishore Manne
This patch adds FPGA Manager support for the Xilinx ZynqMP chip. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26fpga: add intel stratix10 soc fpga manager driverAlan Tull
Add driver for reconfiguring Intel Stratix10 SoC FPGA devices. This driver communicates through the Intel service layer driver which does communication with privileged hardware (that does the FPGA programming) through a secure mailbox. Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Richard Gong <richard.gong@intel.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls supportWu Hao
DMA memory regions are required for Accelerated Function Unit (AFU) usage. These two ioctls allow user space applications to map user memory regions for dma, and unmap them after use. Iova is returned from driver to user space application via DFL_FPGA_PORT_DMA_MAP ioctl. Application needs to unmap it after use, otherwise, driver will unmap them in device file release operation. Each AFU has its own rb tree to keep track of its mapped DMA regions. Ioctl interfaces: * DFL_FPGA_PORT_DMA_MAP Do the dma mapping per user_addr and length provided by user. Return iova in provided struct dfl_fpga_port_dma_map. * DFL_FPGA_PORT_DMA_UNMAP Unmap the dma region per iova provided by user. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: afu: add afu sub feature supportXiao Guangrong
User Accelerated Function Unit sub feature exposes the MMIO region of the AFU. After valid PR bitstream is programmed and the port is enabled, then this MMIO region could be accessed. This patch adds support to enumerate the AFU MMIO region and expose it to userspace via mmap file operation. Below interfaces are exposed to user: Sysfs interface: * /sys/class/fpga_region/<regionX>/<dfl-port.x>/afu_id Read-only. Indicate which PR bitstream is programmed to this AFU. Ioctl interfaces: * DFL_FPGA_PORT_GET_INFO Provide info to userspace on the number of supported region. Only UAFU region is supported now. * DFL_FPGA_PORT_GET_REGION_INFO Provide region information, including access permission, region size, offset from the start of device fd. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: add FPGA Accelerated Function Unit driver basic frameworkWu Hao
On DFL FPGA devices, the Accelerated Function Unit (AFU), can be reprogrammed for different functions. It connects to the FPGA infrastructure (static FPGA region) via a Port. Port CSRs are implemented separately from the AFU CSRs to provide control and status of the Port. Once valid PR bitstream is programmed into the AFU, it allows access to the AFU CSRs in the AFU MMIO space. This patch only implements basic driver framework for AFU, including device file operation framework. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: add fpga region platform driver for FMEWu Hao
This patch adds fpga region platform driver for FPGA Management Engine. It register an fpga region with given fpga manager / bridge device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: add fpga bridge platform driver for FMEWu Hao
This patch adds fpga bridge platform driver for FPGA Management Engine. It implements the enable_set callback for fpga bridge. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: add fpga manager platform driver for FMEWu Hao
This patch adds fpga manager driver for FPGA Management Engine (FME). It implements fpga_manager_ops for FPGA Partial Reconfiguration function. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: fme: add partial reconfiguration sub feature supportKang Luwei
Partial Reconfiguration (PR) is the most important function for FME. It allows reconfiguration for given Port/Accelerated Function Unit (AFU). It creates platform devices for fpga-mgr, fpga-regions and fpga-bridges, and invokes fpga-region's interface (fpga_region_program_fpga) for PR operation once PR request received via ioctl. Below user space interface is exposed by this sub feature. Ioctl interface: * DFL_FPGA_FME_PORT_PR Do partial reconfiguration per information from userspace, including target port(AFU), buffer size and address info. It returns error code to userspace if failed. For detailed PR error information, user needs to read fpga-mgr's status sysfs interface. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: dfl: add FPGA Management Engine driver basic frameworkKang Luwei
The FPGA Management Engine (FME) provides power, thermal management, performance counters, partial reconfiguration and other functions. For each function, it is packaged into a private feature linked to the FME feature device in the 'Device Feature List'. It's a platform device created by DFL framework. This patch adds the basic framework of FME platform driver. It defines sub feature drivers to handle the different sub features, including init, uinit and ioctl. It also registers the file operations for the device file. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: add FPGA DFL PCIe device driverZhang Yi
This patch implements the basic framework of the driver for FPGA PCIe device which implements the Device Feature List (DFL) in its MMIO space. This driver is verified on Intel(R) PCIe-based FPGA DFL devices, including both integrated (e.g. Intel Server Platform with In-package FPGA) and discrete (e.g. Intel FPGA PCIe Acceleration Cards) solutions. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15fpga: add device feature list supportWu Hao
Device Feature List (DFL) defines a feature list structure that creates a linked list of feature headers within the MMIO space to provide an extensible way of adding features. This patch introduces a kernel module to provide basic infrastructure to support FPGA devices which implement the Device Feature List. Usually there will be different features and their sub features linked into the DFL. This code provides common APIs for feature enumeration, it creates a container device (FPGA base region), walks through the DFLs and creates platform devices for feature devices (Currently it only supports two different feature devices, FPGA Management Engine (FME) and Port which the Accelerator Function Unit (AFU) connected to). In order to enumerate the DFLs, the common APIs required low level driver to provide necessary enumeration information (e.g. address for each device feature list for given device) and fill it to the dfl_fpga_enum_info data structure. Please refer to below description for APIs added for enumeration. Functions for enumeration information preparation: *dfl_fpga_enum_info_alloc allocate enumeration information data structure. *dfl_fpga_enum_info_add_dfl add a device feature list to dfl_fpga_enum_info data structure. *dfl_fpga_enum_info_free free dfl_fpga_enum_info data structure and related resources. Functions for feature device enumeration: *dfl_fpga_feature_devs_enumerate enumerate feature devices and return container device. *dfl_fpga_feature_devs_remove remove feature devices under given container device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23fpga: lattice machxo2: Add Lattice MachXO2 supportPaolo Pisati
This patch adds support to the FPGA manager for programming MachXO2 device’s internal flash memory, via slave SPI. Signed-off-by: Paolo Pisati <p.pisati@gmail.com> [atull@kernel.org: use existing FPGA mgr API] Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28fpga: region: move device tree support to of-fpga-region.cAlan Tull
Create of-fpga-region.c and move the following functions without modification from fpga-region.c. * of_fpga_region_find * of_fpga_region_get_mgr * of_fpga_region_get_bridges * child_regions_with_firmware * of_fpga_region_parse_ov * of_fpga_region_notify_pre_apply * of_fpga_region_notify_post_remove * of_fpga_region_notify * of_fpga_region_probe * of_fpga_region_remove Create two new functions with some code from fpga_region_init/exit. * of_fpga_region_init * of_fpga_region_exit Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17fpga manager: Add Altera CvP driverAnatolij Gustschin
Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17fpga manager: Add altera-ps-spi driver for Altera FPGAsJoshua Clayton
altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga: Add support for Xilinx LogiCORE PR DecouplerMoritz Fischer
This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga pr ip: Platform driver for Altera Partial Reconfiguration IP.Matthew Gerlach
This adds a platform bus driver for a fpga-mgr driver that uses the Altera Partial Reconfiguration IP component. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga pr ip: Core driver support for Altera Partial Reconfiguration IP.Matthew Gerlach
Adding the core functions necessary for a fpga-mgr driver for the Altera Partial IP component. It is intended for these functions to be used by the various bus implementations like the platform bus or the PCIe bus. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga manager: Add Xilinx slave serial SPI driverAnatolij Gustschin
The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17fpga: Add support for Lattice iCE40 FPGAsJoel Holdsworth
This patch adds support to the FPGA manager for configuring the SRAM of iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40 UltraPlus devices, through slave SPI. Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17FPGA: Add TS-7300 FPGA managerFlorian Fainelli
Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga-manager: Add Socfpga Arria10 supportAlan Tull
Add low level driver to support reprogramming FPGAs for Altera SoCFPGA Arria10. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga: add altera freeze bridge supportAlan Tull
Add a low level driver for Altera Freeze Bridges to the FPGA Bridge framework. A freeze bridge is a bridge that exists in the FPGA fabric to isolate one region of the FPGA from the busses while that one region is being reprogrammed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10ARM: socfpga: fpga bridge driver supportAlan Tull
Supports Altera SOCFPGA bridges: * fpga2sdram * fpga2hps * hps2fpga * lwhps2fpga Allows enabling/disabling the bridges through the FPGA Bridge Framework API functions. The fpga2sdram driver only supports enabling and disabling of the ports that been configured early on. This is due to a hardware limitation where the read, write, and command ports on the fpga2sdram bridge can only be reconfigured while there are no transactions to the sdram, i.e. when running out of OCRAM before the kernel boots. Device tree property 'init-val' configures the driver to enable or disable the bridge during probe. If the property does not exist, the driver will leave the bridge in its current state. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga: fpga-region: device tree control for FPGAAlan Tull
FPGA Regions support programming FPGA under control of the Device Tree. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga: add fpga bridge frameworkAlan Tull
This framework adds API functions for enabling/ disabling FPGA bridges under kernel control. This allows the Linux kernel to disable FPGA bridges during FPGA reprogramming and to enable FPGA bridges when FPGA reprogramming is done. This framework is be manufacturer-agnostic, allowing it to be used in interfaces that use the FPGA Manager Framework to reprogram FPGA's. The functions are: * of_fpga_bridge_get * fpga_bridge_put Get/put an exclusive reference to a FPGA bridge. * fpga_bridge_enable * fpga_bridge_disable Enable/Disable traffic through a bridge. * fpga_bridge_register * fpga_bridge_unregister Register/unregister a device-specific low level FPGA Bridge driver. Get an exclusive reference to a bridge and add it to a list: * fpga_bridge_get_to_list To enable/disable/put a set of bridges that are on a list: * fpga_bridges_enable * fpga_bridges_disable * fpga_bridges_put Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000Moritz Fischer
This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07fpga manager: add driver for socfpga fpga managerAlan Tull
Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07add FPGA manager coreAlan Tull
API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>