| Age | Commit message (Collapse) | Author |
|---|
|
When putting the port in reset, driver must wait for the soft reset
acknowledgment bit instead of the soft reset bit.
Fixes: 47c1b19c160f (fpga: dfl: afu: add port ops support)
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This is to fix lkp cppcheck warnings:
drivers/fpga/dfl-pci.c:230:6: warning: The scope of the variable 'ret' can be reduced. [variableScope]
int ret = 0;
^
drivers/fpga/dfl-pci.c:230:10: warning: Variable 'ret' is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Fixes: 3c2760b78f90 ("fpga: dfl: pci: fix return value of cci_pci_sriov_configure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
FPGA Manager fixes for 5.8-rc1
Here is one (late) fix for 5.8-rc1 merge window.
Arnd's change addresses a missing build dependency.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: zynqmp: fix modular build
|
|
Two symbols need to be exported to allow the zynqmp-fpga module
to get loaded dynamically:
ERROR: modpost: "zynqmp_pm_fpga_load" [drivers/fpga/zynqmp-fpga.ko] undefined!
ERROR: modpost: "zynqmp_pm_fpga_get_status" [drivers/fpga/zynqmp-fpga.ko] undefined!
To ensure this is done correctly, also fix the Kconfig dependency
to only allow building the fpga driver when the firmware driver is
either disabled, or when it is reachable. With that, the dependency
on the SoC itself can be removed, and there are no surprises when
the fpga driver is built-in but the firmware a module.
Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
|
|
Address is passed to get_user_pages_fast(), which does access_ok().
NB: this is called only from ->ioctl(), and only under USER_DS.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
followed by copy_from_user()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Corrected error handling goto sequnece. Level put_pages should
be called when pinned pages >= 0 && pinned != npages. Level
free_pages should be called when pinned pages < 0.
Fixes: fa8dda1edef9 ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1589825991-3545-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.8
Here's the first set of changes for the 5.8-rc1 merge window.
Dominic's change adds support for accessing AFU regions with gdb.
Gustavo's change is a cleanup patch regarding variable lenght arrays.
Richard's changes update dt-bindings and add support for stratix and agilex.
Sergiu's changes update spi transfers with the new delay field.
Xu's change addresses an issue with a wrong return value.
Shubhrajyoti's change makes the Zynq FPGA driver return -EPROBE_DEFER on
check of devm_clk_get failure.
Xu's change for DFL enables multiple opens.
All of these patches have been reviewed, have appropriate Acked-by's and
have been in the last few linux-next releases without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: afu: support debug access to memory-mapped afu regions
fpga: dfl.h: Replace zero-length array with flexible-array member
arm64: dts: agilex: correct service layer driver's compatible value
dt-bindings, firmware: add compatible value Intel Stratix10 service layer binding
fpga: stratix10-soc: add compatible property value for intel agilex
arm64: dts: agilex: correct FPGA manager driver's compatible value
dt-bindings: fpga: add compatible value to Stratix10 SoC FPGA manager binding
fpga: machxo2-spi: Use new structure for SPI transfer delays
fpga: ice40-spi: Use new structure for SPI transfer delays
fpga: dfl: support multiple opens on feature device node.
|
|
Allow debug access to memory-mapped regions using e.g. gdb.
Signed-off-by: Dominic Chen <d.c.ddcc@gmail.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Add compatible property value so we can reuse FPGA manager driver on
Intel Agilex SoC platform.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Each DFL functional block, e.g. AFU (Accelerated Function Unit) and FME
(FPGA Management Engine), could implement more than one function within
its region, but current driver only allows one user application to access
it by exclusive open on device node. So this is not convenient and
flexible for userspace applications, as they have to combine lots of
different functions into one single application.
This patch removes the limitation here to allow multiple opens to each
feature device node for AFU and FME from userspace applications. If user
still needs exclusive access to these device node, O_EXCL flag must be
issued together with open.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.
e.g. List all events by "perf list"
perf list | grep fme
dfl_fme0/cache_read_hit/ [Kernel PMU event]
dfl_fme0/cache_read_miss/ [Kernel PMU event]
...
dfl_fme0/fab_mmio_read/ [Kernel PMU event]
dfl_fme0/fab_mmio_write/ [Kernel PMU event]
...
dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event]
dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event]
dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event]
...
dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event]
dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event]
...
dfl_fme0/clock [Kernel PMU event]
...
e.g. check increased counter value after run one application using
"perf stat" command.
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test
Performance counter stats for './test':
1 dfl_fme0/fab_mmio_read/
2 dfl_fme0/fab_mmio_write/
1.009496520 seconds time elapsed
Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:
perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/
Performance counter stats for 'system wide':
0 dfl_fme0/fab_mmio_read/
<not supported> dfl_fme0/fab_port_mmio_write,portid=0/
2.141064085 seconds time elapsed
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use direct function call instead of using eemi ops for fpga related
APIs. Also remove eemi ops structure.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-21-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Intel service layer driver has defined error codes for the
specific services, which started from FPGA configuration then RSU
(Remote Status Update).
Intel service layer driver should define the standard error codes
rather than keep adding more error codes for the new services.
The standard error codes will be used by all the clients of Intel service
layer driver.
Replace FPGA and RSU specific error codes with Intel service layer’s
Common error codes.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1586897274-307-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pci_driver.sriov_configure should return negative value on error and
number of enabled VFs on success. But now the driver returns 0 on
success. The sriov configure still works but will cause a warning
message:
XX VFs requested; only 0 enabled
This patch changes the return value accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
In probe, the driver checks for devm_clk_get return and print error
message in the failing case. However for -EPROBE_DEFER this message is
confusing so avoid it.
The similar change was done also by commit 28910cee898c
("fpga: xilinx-pr-decoupler: Remove clk_get error message for probe defer")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
In probe, the driver checks for devm_clk_get return and print error
message in the failing case. However for -EPROBE_DEFER this message
is confusing so avoid it.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
devm_ioremap_resource already contains error message, so remove
the redundant dev_err message
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/fpga/dfl-afu-main.c: In function ‘afu_dev_destroy’:
drivers/fpga/dfl-afu-main.c:816:18: warning: variable ‘afu’
set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed.
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/fpga/dfl-fme-main.c: In function ‘fme_dev_destroy’:
drivers/fpga/dfl-fme-main.c:678:18: warning: variable ‘fme’ set but not
used [-Wunused-but-set-variable]
It is never used and so can be removed.
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch adds support for power management private feature under
FPGA Management Engine (FME). This private feature driver registers
a hwmon for power (power1_input), thresholds information, e.g.
(power1_max / crit / max_alarm / crit_alarm) and also read-only sysfs
interfaces for other power management information. For configuration,
user could write threshold values via above power1_max / crit sysfs
interface under hwmon too.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch adds support to thermal management private feature for DFL
FPGA Management Engine (FME). This private feature driver registers
a hwmon for thermal/temperature monitoring (hwmon temp1_input).
If hardware automatic throttling is supported by this hardware, then
driver also exposes sysfs interfaces under hwmon for thresholds
(temp1_max/ crit/ emergency), threshold alarms (temp1_max_alarm/
temp1_crit_alarm) and throttling policy (temp1_max_policy).
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Moritz Fischer <mdf@kernel.org>
Cc: linux-fpga@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
|
|
This patch adds support for global error reporting for FPGA
Management Engine (FME), it introduces sysfs interfaces to
report different error detected by the hardware, and allow
user to clear errors or inject error for testing purpose.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
STP (SignalTap) is one of the private features under the port for
debugging. This patch adds private feature driver support for it
to allow userspace applications to mmap related mmio region and
provide STP service.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Error reporting is one important private feature, it reports error
detected on port and accelerated function unit (AFU). It introduces
several sysfs interfaces to allow userspace to check and clear
errors detected by hardware.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
As these two functions are used by other private features within the
same driver module but different driver files. e.g. in error reporting
private feature, it requires to clear errors when port is in reset.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch introduces userclock sysfs interfaces for AFU, user
could use these interfaces for clock setting to AFU.
Please note that, this is only working for port header feature
with revision 0, for later revisions, userclock setting is moved
to a separated private feature, so one revision sysfs interface
is exposed to userspace application for this purpose too.
Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch takes advantage of driver core which helps to create
and remove sysfs attribute files, so there is no need to register
sysfs entries manually in dfl-afu platform river code.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch takes advantage of driver core which helps to create
and remove sysfs attribute files, so there is no need to register
sysfs entries manually in dfl-fme platform river code.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch makes init callback of sub features optional. With
this change, people don't need to prepare any empty init callback.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into fpga-dfl-for-5.4
|
|
We need the fixes in here as well for testing and merges
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus
Moritz writes:
FPGA Manager fixes for 5.3
A single fix for the altera-ps-spi driver that fixes the behavior when
the driver receives -EPROBE_DEFER when trying to obtain a GPIO desc.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: altera-ps-spi: Fix getting of optional confd gpio
|
|
Add Stratix10 specific functions that use a credit mechanism
to throttle data to the CvP FIFOs. Add a private structure
with function pointers for V1 vs V2 functions.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
In preparation for adding newer V2 parts that use a FIFO,
reorganize altera_cvp_chk_error() and change the write
function to block based.
V2 parts have a block size matching the FIFO while older
V1 parts write a 32 bit word at a time.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Newer Intel FPGAs have different Vendor Specific offsets than
legacy parts. Use PCI discovery to find the CvP registers.
Since the register positions remain the same, change the hard
coded address to a more flexible way of indexing registers
from the offset.
Adding new PCI read and write abstraction functions to
handle the offset (altera_read_config_dword() and
altera_write_config_dword()).
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Currently the driver does not handle EPROBE_DEFER for the confd gpio.
Use devm_gpiod_get_optional() instead of devm_gpiod_get() and return
error codes from altera_ps_probe().
Fixes: 5692fae0742d ("fpga manager: Add altera-ps-spi driver for Altera FPGAs")
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.4-rc1
Here is the first set of changes for the 5.4-rc1 merge window.
They're all more or less cleanup patches:
- Carlos' patch addresses a checkpatch warning
- My first patch changes the return type of a function to align it with
the fact that nothing checks the return value and it uncoditionally
returned 0 anyways
- My second patch somehow fell through the cracks before and cleans up
the FPGA bridge bindings by consolidating them instead of repeating
the same paragraph over and over again.
All of these patches have been in the last few linux-next releases
without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
dt-bindings: fpga: Consolidate bridge properties
fpga: altera-pr-ip: Make alt_pr_unregister function void
fpga: altera-cvp: Fix function definition argument
|
|
This patch adds 3 read-only sysfs interfaces for FPGA Management Engine
(FME) block for capabilities including cache_size, fabric_version and
socket_id.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1564914022-3710-11-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch makes uinit callback of sub features optional. With
this change, people don't need to prepare any empty uinit callback.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/1564914022-3710-9-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds id_table for each dfl private feature driver,
it allows to reuse same private feature driver to match and support
multiple dfl private features.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1564914022-3710-6-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces more sysfs interfaces for Accelerated
Function Unit (AFU). These interfaces allow users to read
current AFU Power State (APx), read / clear AFU Power (APx)
events which are sticky to identify transient APx state,
and manage AFU's LTR (latency tolerance reporting).
Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/1564914022-3710-4-git-send-email-hao.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
