summaryrefslogtreecommitdiff
path: root/drivers/fpga
AgeCommit message (Collapse)Author
2017-02-10fpga zynq: Use the scatterlist interfaceJason Gunthorpe
This allows the driver to avoid a high order coherent DMA allocation and memory copy. With this patch it can DMA directly from the kernel pages that the bitfile is stored in. Since this is now a gather DMA operation the driver uses the ISR to feed the chips DMA queue with each entry from the SGL. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10fpga: Add scatterlist based programmingJason Gunthorpe
Requiring contiguous kernel memory is not a good idea, this is a limited resource and allocation can fail under normal work loads. This introduces a .write_sg op that supporting drivers can provide to DMA directly from dis-contiguous memory and a new entry point fpga_mgr_buf_load_sg that users can call to directly provide page lists. The full matrix of compatibility is provided, either the linear or sg interface can be used by the user with a driver supporting either interface. A notable change for drivers is that the .write op can now be called multiple times. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10fpga zynq: Check the bitstream for validityJason Gunthorpe
There is no sense in sending a bitstream we know will not work, and with the variety of options for bitstream generation in Xilinx tools it is not terribly clear what the correct input should be. This is particularly important for Zynq since auto-correction was removed from the driver and the Zynq hardware only accepts a bitstream format that is different from what the Xilinx tools typically produce. Worse, the hardware provides no indication why the bitstream fails, it simply times out if the input is wrong. The best option here is to have the kernel print a message informing the user they are using a malformed bistream and programming failure isn't for any of the myriad of other reasons. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10fpga zynq: Check for errors after completing DMAJason Gunthorpe
The completion did not check the interrupt status to see if any error bits were asserted, check error bits and dump some registers if things went wrong. A few fixes are needed to make this work, the IXR_ERROR_FLAGS_MASK was wrong, it included the done bits, which shows a bug in mask/unmask_irqs which were using the wrong bits, simplify all of this stuff. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29fpga: Clarify how write_init works streaming modesJason Gunthorpe
This interface was designed for streaming, but write_init's buf argument has an unclear purpose. Define it to be the first bytes of the bitstream. Each driver gets to set how many bytes (at most) it wants to see. Short bitstreams will be passed through as-is, while long ones will be truncated. The intent is to allow drivers to peek at the header before the transfer actually starts. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-29fpga zynq: Fix incorrect ISR state on bootupJason Gunthorpe
It is best practice to clear and mask all interrupts before associating the IRQ, and this should be done after the clock is enabled. This corrects a bad result from zynq_fpga_ops_state on bootup where left over latched values in INT_STS_OFFSET caused it to report an unconfigured FPGA as configured. After this change the boot up operating state for an unconfigured FPGA reports 'unknown'. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-11-29fpga zynq: Remove priv->devJason Gunthorpe
socfpga uses mgr->dev for debug prints, there should be consistency here, so standardize on that. The only other use was for dma which can be replaced with mgr->dev.parent. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
2016-11-29fpga zynq: Add missing \n to messagesJason Gunthorpe
Function dev_err doesn't add a newline at the end of the string. This will lead to a hard to read kernel log. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-29fpga: Add COMPILE_TEST to all driversJason Gunthorpe
Like Zynq the Altera drivers compile fine on x86 and others too, so make it easier to compile test this stuff. A10 requires REGMAP_MMIO to compile, so be explicit rather than relying on it via ARCH_SOCFPGA. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Alan Tull <atull@opensource.altera.com>
2016-11-17ARM: socfpga: checking the wrong variableDan Carpenter
This is a cut and paste bug. We had intended to check "sysmgr". Fixes: e5f8efa5c8bf ("ARM: socfpga: fpga bridge driver support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga-manager: Add Socfpga Arria10 supportAlan Tull
Add low level driver to support reprogramming FPGAs for Altera SoCFPGA Arria10. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga: add altera freeze bridge supportAlan Tull
Add a low level driver for Altera Freeze Bridges to the FPGA Bridge framework. A freeze bridge is a bridge that exists in the FPGA fabric to isolate one region of the FPGA from the busses while that one region is being reprogrammed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10ARM: socfpga: fpga bridge driver supportAlan Tull
Supports Altera SOCFPGA bridges: * fpga2sdram * fpga2hps * hps2fpga * lwhps2fpga Allows enabling/disabling the bridges through the FPGA Bridge Framework API functions. The fpga2sdram driver only supports enabling and disabling of the ports that been configured early on. This is due to a hardware limitation where the read, write, and command ports on the fpga2sdram bridge can only be reconfigured while there are no transactions to the sdram, i.e. when running out of OCRAM before the kernel boots. Device tree property 'init-val' configures the driver to enable or disable the bridge during probe. If the property does not exist, the driver will leave the bridge in its current state. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga: fpga-region: device tree control for FPGAAlan Tull
FPGA Regions support programming FPGA under control of the Device Tree. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga: add fpga bridge frameworkAlan Tull
This framework adds API functions for enabling/ disabling FPGA bridges under kernel control. This allows the Linux kernel to disable FPGA bridges during FPGA reprogramming and to enable FPGA bridges when FPGA reprogramming is done. This framework is be manufacturer-agnostic, allowing it to be used in interfaces that use the FPGA Manager Framework to reprogram FPGA's. The functions are: * of_fpga_bridge_get * fpga_bridge_put Get/put an exclusive reference to a FPGA bridge. * fpga_bridge_enable * fpga_bridge_disable Enable/Disable traffic through a bridge. * fpga_bridge_register * fpga_bridge_unregister Register/unregister a device-specific low level FPGA Bridge driver. Get an exclusive reference to a bridge and add it to a list: * fpga_bridge_get_to_list To enable/disable/put a set of bridges that are on a list: * fpga_bridges_enable * fpga_bridges_disable * fpga_bridges_put Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga-mgr: add fpga image information structAlan Tull
This patch adds a minor change in the FPGA Manager API to hold information that is specific to an FPGA image file. This change is expected to bring little, if any, pain. The socfpga and zynq drivers are fixed up in this patch. An FPGA image file will have particulars that affect how the image is programmed to the FPGA. One example is that current 'flags' currently has one bit which shows whether the FPGA image was built for full reconfiguration or partial reconfiguration. Another example is timeout values for enabling or disabling the bridges in the FPGA. As the complexity of the FPGA design increases, the bridges in the FPGA may take longer times to enable or disable. This patch adds a new 'struct fpga_image_info', moves the current 'u32 flags' to it. Two other image-specific u32's are added for the bridge enable/disable timeouts. The FPGA Manager API functions are changed, replacing the 'u32 flag' parameter with a pointer to struct fpga_image_info. Subsequent patches fix the existing low level FPGA manager drivers. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10fpga: add method to get fpga manager from deviceAlan Tull
The intent is to provide a non-DT method of getting ahold of a FPGA manager to do some FPGA programming. This patch refactors of_fpga_mgr_get() to reuse most of it while adding a new method fpga_mgr_get() for getting a pointer to a fpga manager struct, given the device. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-08fpga manager: Add hardware dependency to Zynq driverJean Delvare
The Zynq FPGA manager driver serves no purpose on other architectures so hide it unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-04drivers/fpga/Kconfig: fix build failureSudip Mukherjee
While building m32r allmodconfig the build is failing with the error: ERROR: "bad_dma_ops" [drivers/fpga/zynq-fpga.ko] undefined! Xilinx Zynq FPGA is using DMA but there was no dependency while building. Link: http://lkml.kernel.org/r/1464346526-13913-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-24fpga manager: Fix firmware resource leak on errorTobias Klauser
If fpga_mgr_buf_load() fails, the firmware resource previously allocated by request_firmware() is leaked. Fix it by calling release_firmware() regardless of the return value of fpga_mgr_buf_load(). Found by the Coverity scanner (CID 1339653). Fixes: 6a8c3be7ec8e ("add FPGA manager core") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24fpga manager: remove labelAlan Tull
Remove implementation of 'label' DT binding. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-29fpga: socfpga: Fix check of return value of devm_request_irqMoritz Fischer
The return value should be checked for non-zero, instead of checking it being IS_ERR_VALUE(). Acked-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Josh Cartwright <joshc@eso.teric.us> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23fpga: zynq-fpga: Fix issue with drvdata being overwritten.Moritz Fischer
Upon registering a FPGA Manager low level driver, FPGA Manager core overwrites the platform drvdata pointer. Prior to this commit zynq-fpga falsely relied on this pointer to still be valid at remove() time. Reported-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23fpga manager: remove unnecessary null pointer checksAlan Tull
Remove unnecessary null pointer checks. We want the caller of these functions to do their own pointer checks. Add some comments to document this. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23fpga manager: ensure lifetime with of_fpga_mgr_getAlan Tull
Ensure device and driver lifetime from of_fpga_mgr_get() to fpga_mgr_put(). * Don't put_device() in of_fpga_mgr_get, do it in fpga_mgr_put(). (still do put_device if there is an error). * Do module_get on the low level driver. * Don't need to module_get(THIS_MODULE) since we won't be allowed to unload the fpga manager core without unloading low level driver first. * Remove unnedessary null check for node pointer. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23fpga: zynq-fpga: Change fw format to handle bin instead of bit.Moritz Fischer
This gets rid of the code to strip away the header and byteswap, as well as the check for the sync word. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Josh Cartwright <joshc@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-23fpga: zynq-fpga: Fix unbalanced clock handlingMoritz Fischer
This commit fixes the unbalanced clock handling, where a failed probe would leave the clock with an enable count of -1. Reported-by: Josh Cartwright <joshc@ni.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000Moritz Fischer
This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07fpga manager: add driver for socfpga fpga managerAlan Tull
Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07add FPGA manager coreAlan Tull
API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>