summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-pca953x.c
AgeCommit message (Collapse)Author
2017-04-24gpio: move tca9554 from pcf857x to pca953xAnders Darander
The TCA9554 doesn't work with the pcf857x driver, trying to change the direction gives a NAK bailout error. TCA9554 is similar to the PCA9554, thus change the driver. Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Expand comment for "reset" GPIO in ACPI caseAndy Shevchenko
GPIO ACPI library is going to be stricter about resources, thus, expand comment regarding "reset" GPIO resource in this driver to clarify its usage in ACPI case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Sort headers alphabeticallyAndy Shevchenko
For sake of better maintenance sort the headers by alphabetical order. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Introduce a long awaited ->get_direction()Andy Shevchenko
Introduce ->get_direction() callback for the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Removed use of GPIOF_DIR* flags] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: pca953x: Add optional reset gpio controlSteve Longerbeam
Add optional reset-gpios pin control. If present, de-assert the specified reset gpio pin to bring the chip out of reset. v2: - Specify that reset signal to PCA953x chip is active low, in binding doc. - reorder includes in gpio-pca953x.c. - remove dev_err() on devm_gpiod_get_optional() error return. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-13Merge tag 'gpio-v4.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
2016-12-07Merge branch 'thread-irq-simpler' into develLinus Walleij
2016-11-25gpio: simplify adding threaded interruptsLinus Walleij
This tries to simplify the use of CONFIG_GPIOLIB_IRQCHIP when using threaded interrupts: add a new call gpiochip_irqchip_add_nested() to indicate that we're dealing with a nested rather than a chained irqchip, then create a separate gpiochip_set_nested_irqchip() to mirror the gpiochip_set_chained_irqchip() call to connect the parent and child interrupts. In the nested case gpiochip_set_nested_irqchip() does nothing more than call irq_set_parent() on each valid child interrupt, which has little semantic effect in the kernel, but this is probably still formally correct. Update all drivers using nested interrupts to use gpiochip_irqchip_add_nested() so we can now see clearly which these users are. The DLN2 driver can drop its specific hack with .irq_not_threaded as we now recognize whether a chip is threaded or not from its use of gpiochip_irqchip_add_nested() signature rather than from inspecting .can_sleep. We rename the .irq_parent to .irq_chained_parent since this parent IRQ is only really kept around for the chained interrupt handlers. Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Daniel Baluta <daniel.baluta@intel.com> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Cc: Semen Protsenko <semen.protsenko@globallogic.com> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08gpio: pca953x: Move memcpy into mutex lock for set multiplePhil Reid
Need to ensure that reg_output is not updated while setting multiple bits. This makes the mutex locking behaviour for the set_multiple call consistent with that of the set_value call. Cc: stable@vger.kernel.org Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple") Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08gpio: pca953x: Fix corruption of other gpios in set_multiple.Phil Reid
gpiod_set_array_value_complex does not clear the bits field. Therefore when the drivers set_multiple funciton is called bits outside the mask are undefined and can be either set or not. So bank_val needs to be masked with bank_mask before or with the reg_val cache. Cc: stable@vger.kernel.org Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple") Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24gpio: pca953x: Add MAX7318 compatibleMarek Vasut
Add compatible string for the MAX7318 part. This is a two bank, 16 lines, I2C GPIO expander with interrupt line. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-11gpio: pca953x: add a comment explaining the need for a lockdep subclassBartosz Golaszewski
This is a follow-up to commit 559b46990e76 ("gpio: pca953x: fix an incorrect lockdep warning"). The reason for calling lockdep_set_subclass() in pca953x_probe() is not explained in the code. Add a comment describing the problem, partial solution and required future extensions. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-10-07Merge branch 'i2c/for-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Here is the 4.9 pull request from I2C including: - centralized error messages when registering to the core - improved lockdep annotations to prevent false positives - DT support for muxes, gates, and arbitrators - bus speeds can now be obtained from ACPI - i2c-octeon got refactored and now supports ThunderX SoCs, too - i2c-tegra and i2c-designware got a bigger bunch of updates - a couple of standard driver fixes and improvements" * 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits) i2c: axxia: disable clks in case of failure in probe i2c: octeon: thunderx: Limit register access retries i2c: uniphier-f: fix misdetection of incomplete STOP condition gpio: pca953x: variable 'id' was used twice i2c: i801: Add support for Kaby Lake PCH-H gpio: pca953x: fix an incorrect lockdep warning i2c: add a warning to i2c_adapter_depth() lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible i2c: export i2c_adapter_depth() i2c: rk3x: Fix variable 'min_total_ns' unused warning i2c: rk3x: Fix sparse warning i2c / ACPI: Do not touch an I2C device if it belongs to another adapter i2c: octeon: Fix high-level controller status check i2c: octeon: Avoid sending STOP during recovery i2c: octeon: Fix set SCL recovery function i2c: rcar: add support for r8a7796 (R-Car M3-W) i2c: imx: make bus recovery through pinctrl optional i2c: meson: add gxbb compatible string i2c: uniphier-f: set the adapter to master mode when probing i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path ...
2016-09-24gpio: pca953x: variable 'id' was used twiceWolfram Sang
sparse rightfully said: drivers/gpio/gpio-pca953x.c:771:45: warning: symbol 'id' shadows an earlier one drivers/gpio/gpio-pca953x.c:742:36: originally declared here So, name them explicitly 'i2c_id' and 'acpi_id' to avoid any confusion. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24gpio: pca953x: fix an incorrect lockdep warningBartosz Golaszewski
If an I2C GPIO multiplexer is driven by a GPIO provided by an expander when there's a second expander using the same device driver on one of the I2C bus segments, lockdep prints a deadlock warning when trying to set the direction or the value of the GPIOs provided by the second expander. The below diagram presents the setup: - - - - - ------- --------- Bus segment 1 | | | | | |--------------- Devices | | SCL/SDA | | | | | Linux |-----------| I2C MUX | - - - - - | | | | | Bus segment 2 | | | | |------------------- ------- | --------- | | | - - - - - ------------ | MUX GPIO | | | | | Devices | GPIO | | | | | Expander 1 |---- - - - - - | | | ------------ | SCL/SDA | ------------ | | | GPIO | | Expander 2 | | | ------------ The reason for lockdep warning is that we take the chip->i2c_lock in pca953x_gpio_set_value() or pca953x_gpio_direction_output() and then come right back to pca953x_gpio_set_value() when the GPIO mux kicks in. The locks actually protect different expanders, but for lockdep both are of the same class, so it says: Possible unsafe locking scenario: CPU0 ---- lock(&chip->i2c_lock); lock(&chip->i2c_lock); *** DEADLOCK *** May be due to missing lock nesting notation In order to get rid of the warning, retrieve the adapter nesting depth and use it as lockdep subclass for chip->i2c_lock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-13Revert "gpio: pca953x: initialize ret to zero to avoid returning garbage"Linus Walleij
This reverts commit 313b9a9938bf4076425741121d5d766826793e5d. This was already fixed by commit bf62efeb164343916ebb89dca6dfe5e6b6751700 "gpio: pca954x: fix undefined error code from remove" The latter is a better fix since it makes it easier to detect erronous code by not assigning a default error code. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: initialize ret to zero to avoid returning garbageColin Ian King
ret is not initialized so it contains garbage. Ensure garbage is not returned in the case that pdata && pdata->teardown is false by initializing ret to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: coding style fixesBartosz Golaszewski
pca953x_gpio_set_multiple() has some coding style issues that make it harder to read. Tweak the code a bit. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: remove an unused variableBartosz Golaszewski
The chip_type variable in struct pca953x_chip is no longer required. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: refactor pca953x_read_regs()Bartosz Golaszewski
Avoid the unnecessary if-else in pca953x_read_regs() by spltting the routine into smaller, specialized functions and calling the right one via a function pointer held in struct pca953x. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: refactor pca953x_write_regs()Bartosz Golaszewski
Avoid the unnecessary if-else in pca953x_write_regs() by splitting the routine into smaller, specialized functions and calling the right one via a function pointer held in struct pca953x_chip. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: code shrinkBartosz Golaszewski
There are multiple places in the driver code where a switch (chip->chip_type) is used to determine the proper register offset. Unduplicate the code by adding a simple structure holding the possible offsets that differ between the pca953x and pca957x chip families and use it to avoid the checks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07gpio: pca954x: fix undefined error code from removeArnd Bergmann
The recent addition of the regulator support has led to the pca953x_remove function returning uninitialized data when no platform data pointer is provided, as gcc warns when using -Wmaybe-uninitialized: drivers/gpio/gpio-pca953x.c: In function 'pca953x_remove': drivers/gpio/gpio-pca953x.c:860:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This restores the previous behavior, returning 0 on success. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e23efa311110 ("gpio: pca954x: Add vcc regulator and enable it") Acked-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-11gpio: pca954x: Add vcc regulator and enable itPhil Reid
Some i2c gpio devices are connected to a switchable power supply which needs to be enabled prior to probing the device. This patch allows the drive to enable the devices vcc regulator prior to probing. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15gpio: pca953x: enable driver on Intel EdisonAndy Shevchenko
Intel Edison board has 4 GPIO expanders PCA9555a connected to I2C bus. Add an ID to support them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13gpio: pca953x: Fix NBANK calculation for PCA9536Vignesh R
NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpio: pca953x: enfore type for i2c_smbus_write_word_data()Andy Shevchenko
The commit 9b8e3ec34318 ("gpio: pca953x: Use correct u16 value for register word write") fixed regression in pca953x_write_regs(). At the same time the solution introduced a sparse warning: drivers/gpio/gpio-pca953x.c:168:39: warning: incorrect type in argument 3 (different base types) drivers/gpio/gpio-pca953x.c:168:39: expected unsigned short [unsigned] [usertype] value drivers/gpio/gpio-pca953x.c:168:39: got restricted __le16 [usertype] <noident> Fix the code by enforcing the type of i2c_smbus_write_word_data() parameter. Cc: Yong Li <sdliyong@gmail.com> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-07gpio: pca953x: remove redundant assignmentsAndy Shevchenko
There are few redundant assignments of ret variable which is updated anyway. Remove them for good. While here, correct indentation of the constant definition and remove one empty line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-07gpio: pca953x: Add support for TI PCA9536Vignesh R
TI PCA9536 is 4-Bit I2C GPIO expander without interrupt support[1]. Add support for the same. [1] TRM: http://www.ti.com/lit/ds/symlink/pca9536.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-17Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
2016-04-09gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2Yong Li
Galileo Gen2 board uses the PCAL9535 as the GPIO expansion, it is different from PCA9535 and includes interrupt mask/status registers, The current driver does not support the interrupt registers configuration, it causes some gpio pins cannot trigger interrupt events, this patch fix this issue. The original patch was submitted by Josef Ahmad <josef.ahmad@linux.intel.com> http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-quark/tree/recipes-kernel/linux/files/0015-Quark-GPIO-1-2-quark.patch Signed-off-by: Yong Li <yong.b.li@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpio: pca953x: Use correct u16 value for register word writeYong Li
The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Cc: stable@vger.kernel.org Signed-off-by: Yong Li <sdliyong@gmail.com> Reviewed-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bitGeert Uytterhoeven
pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, which assumes a 32-bit platform, and is not correct on 64-bit platforms. Use "sizeof(...)" instead to fix this. Cc: stable@vger.kernel.org Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23gpio: pca953x: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan
Use devm_gpiochip_add_data() for GPIO registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-01-05gpio: pca953x: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Toby Smith <toby@tismith.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.Phil Reid
Tested with TCA6408 / TCA6416 devices. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-09gpio: pca953x: make inclusion of <linux/of_platform.h> unconditionalLinus Walleij
After adding the DT matching in commit 6f29c9afbe636fc0e35c82a11eaf45c3b85eb07a "gpio: pca935x: fix of-only probed devices" compilation fails like this: CC [M] drivers/gpio/gpio-pca953x.o gpio-pca953x.c: In function ‘pca953x_probe’: gpio-pca953x.c:693:11: error: implicit declaration of function ‘of_match_device’ [-Werror=implicit-function-declaration] match = of_match_device(pca953x_dt_ids, &client->dev); ^ gpio-pca953x.c:693:9: warning: assignment makes pointer from integer without a cast [-Wint-conversion] match = of_match_device(pca953x_dt_ids, &client->dev); ^ cc1: some warnings being treated as errors ../scripts/Makefile.build:264: recipe for target 'drivers/gpio/gpio-pca953x.o' failed After removing the conditional inclusion guards compilation works fine again. Might be a module problem so that fix. Cc: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-09gpio: pca935x: fix of-only probed devicesBen Dooks
If the pca953x device is probed from OF using the proper OF probing then the i2c-client will be NULL and the device probe will fail as id is NULL and it isn't an ACPI device (previous drivers would simply OOPS out). Add support for the of_device_id table having the same data as the others so that the correct paths will be taken when registering a device. An example of current valid of node which did not work: gpio@38 { compatible = "onsemi,pca9654", "nxp,pca9534"; reg = <0x38>; interrupt-parent = <&gpio5>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-09gpio: pca953x: add onsemi,pca9654 idBen Dooks
Add onsemi,pca9654 which is also compatible with the nxp,pca9524 as it is an 8bit expander with an interrupt output. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05gpio: pca953x: support ACPI devices found on Galileo Gen2Andy Shevchenko
This patch adds a support of the expandes found on Intel Galileo Gen2 board. The platform information comes from ACPI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05gpio: pca953x: store driver_data for future useAndy Shevchenko
Instead of using id->driver_data directly we copied it to the internal structure. This will help to adapt driver for ACPI use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: pca953x: Add TI TCA9539 supportThierry Reding
The TCA9539 is almost identical to the PCA9555 and software-compatible with this driver. It exposes 16 general purpose I/O pins in two 8-bit configurations. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: Fix error checking in the function device_pca957x_initNicholas Krause
This fixes error checking in the function device_pca957x_init to properly check and return error code values from the calls to the function pca953x_write_regs if they fail as to properly signal callers when a error occurs due a failure when writing registers for this gpio based device. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio: pca953x: fix nested irqs reschedulingGrygorii Strashko
pca953x interrupt controller functionality is implemented using nested threaded IRQs which require parent_irq to be configured properly otherwise below warning can be seen if IRQ core will try re-schedule nested IRQ: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 12 at kernel/irq/manage.c:696 irq_nested_primary_handler+0x30/0x38() Primary handler called for nested irq 301 Modules linked in: uinput ipv6 smsc95xx usbnet mii imx2_wdt etnaviv(C) matrix_keypad matrix_keymap ar1021_i2c CPU: 1 PID: 12 Comm: ksoftirqd/1 Tainted: G WC 4.1.1 #9 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013298>] (dump_backtrace) from [<c0013488>] (show_stack+0x20/0x24) [<c0013468>] (show_stack) from [<c05743c4>] (dump_stack+0x70/0xc0) [<c0574354>] (dump_stack) from [<c002b7b8>] (warn_slowpath_common+0x88/0xc0) [<c002b730>] (warn_slowpath_common) from [<c002b8ac>] (warn_slowpath_fmt+0x40/0x48) [<c002b870>] (warn_slowpath_fmt) from [<c0075798>] (irq_nested_primary_handler+0x30/0x38) [<c0075768>] (irq_nested_primary_handler) from [<c0075200>] (handle_irq_event_percpu+0x70/0x2d0) [<c0075190>] (handle_irq_event_percpu) from [<c00754ac>] (handle_irq_event+0x4c/0x6c) [<c0075460>] (handle_irq_event) from [<c0078204>] (handle_simple_irq+0xa4/0xc8) [<c0078160>] (handle_simple_irq) from [<c0077cd4>] (resend_irqs+0x50/0x7c) [<c0077c84>] (resend_irqs) from [<c002f99c>] (tasklet_action+0x94/0x140) [<c002f908>] (tasklet_action) from [<c002eea8>] (__do_softirq+0xa0/0x3c8) [<c002ee08>] (__do_softirq) from [<c002f208>] (run_ksoftirqd+0x38/0x54) [<c002f1d0>] (run_ksoftirqd) from [<c004b1e4>] (smpboot_thread_fn+0x1f8/0x2f0) [<c004afec>] (smpboot_thread_fn) from [<c0047744>] (kthread+0xe8/0x104) [<c004765c>] (kthread) from [<c000fac8>] (ret_from_fork+0x14/0x2c) ---[ end trace 96052cda48865769 ]--- The issue was reported and described in details by Lothar Waßmann and Christian Gmeiner in https://lkml.org/lkml/2014/9/9/123. Fix it by adding missed call of gpiochip_set_chained_irqchip() so GPIO IRQ chip helpers will set parent_irq for nested IRQs properly. Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01gpio: Prevent an integer overflow in the pca953x driverJoshua Scott
Interrupts were missed if an 8-bit integer overflow occurred. This was observed when bank0,pin7 and bank1,pin7 changed simultaniously. As the 8-bit totals were only checked against zero, replace them with booleans. Name the booleans so that their purpose is clear. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19Drivers: gpio: Fix spelling errorsColin Cronin
Fixed several spelling errors in gpio-lynxpoint, gpio-pca953x, gpio-tegra, gpio-zynq, gpiolib-of, gpiolib. Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-28gpio: pca953x: Drop deprecated DT bindingsMarkus Pargmann
Drop deprecated DT bindings and use automaticly assigned gpio and irq bases. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22gpio: remove all usage of gpio_remove retval in driver/gpioabdoulaye berthe
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-28gpio: pca953x: use gpiolib irqchip helpersLinus Walleij
This switches the PCA953x driver over to using the gpiolib irqchip helpers to handle the threaded interrups cascaded off this GPIO chip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2024-06-01 14:26:20 +0000