| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
|
|
These gpio names are due to old DT bindings not following the
"-gpio"/"-gpios" conventions. Handle it using a quirk so the
driver can just look up the GPIOs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231006-descriptors-asoc-mediatek-v1-1-07fe79f337f5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We're porting all users of gpiochip_find() to using gpio_device_find().
Update the OF GPIO code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The "trigger-sources" phandle used for LED triggers are special:
the DT bindings mandate that such triggers have the same phandle
references no matter what the trigger is. A GPIO is just another
kind of device that can trigger a LED.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We have a special place for OF polarity quirks in gpiolib-of.c. Let's
move this over there so that it doesn't pollute the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
|
|
According to the comments in linux/notifier.h, the code to return when a
notifications is "not for us" is NOTIFY_DONE, not NOTIFY_OK.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
removing more lines then we're adding this release cycle.
Nothing really stands out, just small updates all over the place.
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the
place
- remove unneeded of_match_ptr() expansions whenever a driver depends
on CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and
gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling,
allow building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML"
* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
gpio: pca953x: add support for TCA9538
dt-bindings: gpio: pca95xx: document new tca9538 chip
gpio: pca953x: Use i2c_get_match_data()
gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
gpio: pcf857x: Extend match data support for OF tables
gpio: vf610: switch to dynamic allocat GPIO base
gpiolib: provide and use gpiod_line_state_notify()
gpio: cdev: wake up lineevent poll() on device unbind
gpio: cdev: wake up linereq poll() on device unbind
gpio: cdev: wake up chardev poll() on device unbind
gpiolib: add a second blocking notifier to struct gpio_device
gpio: cdev: open-code to_gpio_chardev_data()
gpiolib: rename the gpio_device notifier
gpio: mlxbf3: Support add_pin_ranges()
gpio: mxc: Use helper function devm_clk_get_optional_enabled()
gpio: pca9570: fix kerneldoc
gpio: sim: simplify code with cleanup helpers
gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
gpio: sim: simplify gpio_sim_device_config_live_store()
gpio: mxc: release the parent IRQ in runtime suspend
...
|
|
The polarity of the card detection gpio is handled by the "cd-inverted"
property in the device tree. Move this inversion logic to gpiolib to avoid
reading the gpio raw value.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825095157.76073-4-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
GPIO library should rely only on the GPIO device's fwnode.
Hence, replace GPIO chip fwnode usage by respective OF node
of the GPIO device.
JFYI, this is partial revert of 8afe82550240 ("gpiolib: of:
Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There is a few things done:
- include only the headers we are direct user of
- when pointer is in use, provide a forward declaration
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.
Split it out with a separate header file and Kconfig option
so it can be removed on its own timeline aside from removing
the of_gpio consumer interfaces.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Nothing special, notably a lot of new Qualcomm hardware is supported,
a RISC-V reference SoC and then some cleanups both in code and device
tree bindings.
Core changes:
- Add PINCTRL_PINFUNCTION() macro and use it in several drivers
New drivers:
- New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
pin controllers. (RISC-V.)
- New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller
- New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
controllers
- New subdriver for the Qualcomm SA8775P SoC pin controller
- New subdriver for the Qualcomm IPQ5332 SoC pin controller
- New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
control
- New subdriver for the Mediatek MT7981 SoC pin controller
Improvements:
- Several cleanups and refactorings to the Intel drivers
- Add 4KOhm bias support to the Intel driver
- Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver
- Support general purpose clocks in the Qualcomm MSM8226 SoC
- Several conversions to use the new I2C .probe_new() call
- Massive clean-up of the Qualcomm Device Tree YAML schemas
- Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
driver"
* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
pinctrl: qcom: Add support for i2c specific pull feature
pinctrl: starfive: Add StarFive JH7110 aon controller driver
pinctrl: starfive: Add StarFive JH7110 sys controller driver
dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
pinctrl: add mt7981 pinctrl driver
dt-bindings: pinctrl: add bindings for MT7981 SoC
dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
pinctrl: qcom: Introduce IPQ5332 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
pinctrl: at91: use devm_kasprintf() to avoid potential leaks
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
...
|
|
GPIO library for OF is the only user for enum of_gpio_flags.
Move it there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
All new drivers should use fwnode and / or parent to provide the
necessary information to the GPIO library.
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Now that everyone is using [devm_]fwnode_gpiod_get[_index]() APIs,
remove OF-specific [devm_]gpiod_get_from_of_node().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are no more users of these APIs in the mainline kernel, remove
them. This leaves of_get_named_gpio() as the only legacy OF-specific
API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The function is only being called form the main gpiolib module, so
remove comment saying that it is also used by external callers.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The only user of this function is gpiolib-of.c so move it there.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 3550bba25d5587a701e6edf20e20984d2ee72c78.
No users for this one, revert it for good.
The ->add_pin_ranges() can be used instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The OF node store in chip->fwnode is used to explicitly override the FW
node for a GPIO chip. For chips that use the default FW node (i.e. that
of their parent device), this will be NULL and cause the chip not to be
fully registered.
Instead, use the GPIO device's FW node, which is set to either the node
of the parent device or the explicit override in chip->fwnode.
Fixes: 8afe82550240 ("gpiolib: of: Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Robert Marko <robimarko@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The callers never call the function with invalid pointer.
Moreover, compiler quite likely dropped that check anyway
because we use that pointer before the check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO library is getting rid of of_node, fwnode should be utilized instead.
Prepare of_mm_gpiochip_add_data() for fwnode.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation of switching all OF-based GPIO lookups to go through
of_find_gpio() let's change it to accept device node as its argument as
we do not always have access to device structure.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
gpiochip_init_valid_mask()
In preparation to complete fwnode switch, integrate
of_gpiochip_init_valid_mask() into gpiochip_init_valid_mask().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO library is getting rid of of_node, fwnode should be utilized instead.
Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Bindings for Freescale PCIe controller use a separate property called
"reset-gpio-active-high" to control polarity of its reset line, add it
to the list of quirks in gpiolib so that gpiod API can be used in the
driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Several legacy bindings use a separate property to specify polarity of
GPIOs instead of specifying it directly in the GPIO property. Factor
out this code to make it easier to add more such cases.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Make use of device_match_of_node() instead of open coding its
functionality.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Existing DTS that use legacy (non-standard) property name for the reset
line "gpios-reset" also specify incorrect polarity (0 which maps to
"active high"). Add a quirk to force polarity to "active low" so that
once driver is converted to gpiod API that pays attention to line
polarity it will work properly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Bindings for Freescale Fast Ethernet Controller use a separate
property "phy-reset-active-high" to specify polarity of its phy
gpio line. To allow converting the driver to gpiod API we need
to add this quirk to gpiolib.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are several instances where we use a separate property to
override polarity specified in gpio property. Factor it out into
a separate function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The driver is using non-standard "gpio-rtc-data", "gpio-rtc-sclk", and
"gpio-rtc-reset" names for properties describing its gpios. In
preparation to converting to the standard naming ("rtc-*-gpios") and
switching the driver to gpiod API add a quirk to gpiolib to keep
compatibility with existing DTSes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The controller is using non-standard "cirrus,gpio-nreset" name for its
reset gpio property, whereas gpiod API expects "<name>-gpios".
Add a quirk so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The controller is using non-standard "reset-n-io" name for its reset
gpio property, whereas gpiod API expects "<name>-gpios". Add a quirk
so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Some legacy mappings used "gpio[s]-reset" instead of "reset-gpios",
add a quirk so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Tighten selection of legacy gpio renaming quirks so that they only
considered on more relevant configurations.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This consolidates all quirks doing simple renames (either allowing
suffix-less names or trivial renames, when index changes are not
required) into a single quirk.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The driver is using non-standard "i2s1-in-sel-gpio1" and
"i2s1-in-sel-gpio2" names to describe its gpios. In preparation to
converting to the standard naming (i2s1-in-sel-gpios) and switching the
driver to gpiod API add a quirk to gpiolib to keep compatibility with
existing DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Commit a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()")
introduced an array of quirk functions which get iterated over. But a
sentinal value is missing. Add it.
Fixes: a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
There are several places where we need to convert from OF flags to
"normal" GPIO_* flags, so let's introduce a helper and use it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Instead of having a string of "if" statements let's put all quirks into
an array and iterate over them.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
There is no need for of_find_spi_cs_gpio() to be different from other
quirks: the only variant of property actually used in DTS is "gpios"
(plural) so we can use of_get_named_gpiod_flags() instead of recursing
into of_find_gpio() again.
This will allow us consolidate quirk handling down the road.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
We should not ignore index passed into of_find_gpio() when handling
quirks. While in practice this change will not have any effect, it
will allow consolidate quirk handling.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.
This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().
Fixes: a19e3da5bc5f ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Instead of open coding, use device_match_of_node() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have lots of small changes all over the place, but no huge reworks
or new drivers:
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in
drivers
- make irqchips immutable due to the new warning popping up when
drivers try to modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar
and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x &
gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of
gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and
descriptors to gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core"
* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpio: sifive: Make the irqchip immutable
gpio: rcar: Make the irqchip immutable
gpio: pcf857x: Make the irqchip immutable
gpio: pca953x: Make the irqchip immutable
gpio: dwapb: Make the irqchip immutable
gpio: sim: Use correct order for the parameters of devm_kcalloc()
gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
gpio: ws16c48: Utilize iomap interface
gpio: gpio-mm: Utilize iomap interface
gpio: 104-idio-16: Utilize iomap interface
gpio: 104-idi-48: Utilize iomap interface
gpio: 104-dio-48e: Utilize iomap interface
gpio: zevio: drop of_gpio.h header
gpio: max77620: Make the irqchip immutable
dt-bindings: gpio: pca95xx: add entry for pca6408
gpio: pca953xx: Add support for pca6408
gpio: max732x: Drop unused support for irq and setup code via platform data
gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
...
|
|
Gpiolib interprets the elements of "gpio-reserved-ranges" as "start,size"
because it clears "size" bits starting from the "start" bit in the according
bitmap. So it has to use "greater" instead of "greater or equal" when performs
bounds check to make sure that GPIOs are in the available range.
Previous implementation skipped ranges that include the last GPIO in
the range.
I wrote the mail to the maintainers
(https://lore.kernel.org/linux-gpio/20220412115554.159435-1-andrei.lalaev@emlid.com/T/#u)
of the questioned DTSes (because I couldn't understand how the maintainers
interpreted this property), but I haven't received a response.
Since the questioned DTSes use "gpio-reserved-ranges = <0 4>"
(i.e., the beginning of the range), this patch doesn't affect these DTSes at all.
TBH this patch doesn't break any existing DTSes because none of them
reserve gpios at the end of range.
Fixes: 726cb3ba4969 ("gpiolib: Support 'gpio-reserved-ranges' property")
Signed-off-by: Andrei Lalaev <andrei.lalaev@emlid.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Since commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
the device tree nodes of GPIO controller need the gpio-ranges property to
handle gpio-hogs. Unfortunately it's impossible to guarantee that every new
kernel is shipped with an updated device tree binary.
In order to provide backward compatibility with those older DTB, we need a
callback within of_gpiochip_add_pin_range() so the relevant platform driver
can handle this case.
Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220409095129.45786-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
