summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpiolib.h
AgeCommit message (Collapse)Author
2019-02-13gpio: add core support for pull-up/pull-down configurationThomas Petazzoni
This commit adds support for configuring the pull-up and pull-down resistors available in some GPIO controllers. While configuring pull-up/pull-down is already possible through the pinctrl subsystem, some GPIO controllers, especially simple ones such as GPIO expanders on I2C, don't have any pinmuxing capability and therefore do not use the pinctrl subsystem. This commit implements the GPIO_PULL_UP and GPIO_PULL_DOWN flags, which can be used from the Device Tree, to enable a pull-up or pull-down resistor on a given GPIO. The flag is simply propagated all the way to the core GPIO subsystem, where it is used to call the gpio_chip ->set_config callback with the appropriate existing PIN_CONFIG_BIAS_* values. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-11gpio: Export gpiod_get_from_of_node()Linus Walleij
This function already exist inside gpiolib, we were just reluctant to make it available to the kernel at large as the devm_* seemed to be enough for anyone. However we found out that regulators need to do their own lifecycle/refcounting on GPIO descriptors and explicitly call gpiod_put() when done with a descriptor, so export this function so we can hand the refcounting over to the regulator core for these descriptors after retrieveal. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-01gpio: Restore indentation of continued linesGeert Uytterhoeven
Fixes: 3027743f83f867d8 ("gpio: Remove VLA from gpiolib") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25gpio: Use SPDX header for core libraryLinus Walleij
Use the SPDX headers and cut down on boilerplate to indicate the license in the core gpiolib implementation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20Merge branch 'ib-array-bitmaps' into develLinus Walleij
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Identify arrays matching GPIO hardwareJanusz Krzysztofik
Certain GPIO array lookup results may map directly to GPIO pins of a single GPIO chip in hardware order. If that condition is recognized and handled efficiently, significant performance gain of get/set array functions may be possible. While processing a request for an array of GPIO descriptors, identify those which represent corresponding pins of a single GPIO chip. Skip over pins which require open source or open drain special processing. Moreover, identify pins which require inversion. Pass a pointer to that information with the array to the caller so it can benefit from enhanced performance as soon as get/set array functions can accept and make efficient use of it. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-10gpiolib: add flag to indicate if the irq is disabledHans Verkuil
GPIO drivers call gpiochip_(un)lock_as_irq whenever they want to use a gpio as an interrupt. This is done when the irq is requested and it marks the gpio as in use by an interrupt. This is problematic for cases where a gpio pin is used as an interrupt pin, then, after the irq is disabled, is used as a regular gpio pin. Currently it is not possible to do this other than by first freeing the interrupt so gpiochip_unlock_as_irq is called, since an attempt to switch the gpio direction for output will fail since gpiolib believes that the gpio is in use for an interrupt and it does not know that it the irq is actually disabled. There are currently two drivers that would like to be able to do this: the tda998x_drv.c driver where a regular gpio pin needs to be temporarily reconfigured as an interrupt pin during CEC calibration, and the cec-gpio driver where you want to configure the gpio pin as an interrupt while waiting for traffic over the CEC bus, or as a regular pin when receiving or transmitting a CEC message. The solution is to add a new flag that is set when the irq is enabled, and have gpiod_direction_output check for that flag. We also add functions that drivers that do not use GPIOLIB_IRQCHIP can call when they enable/disable the irq. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpiolib: Mark gpio_suffixes array with __maybe_unusedAndy Shevchenko
Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gpio_suffixes array with __maybe_unused to hide a compiler warning: In file included from drivers/gpio/gpiolib-legacy.c:6:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ In file included from drivers/gpio/gpiolib-devprop.c:17:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: Remove VLA from gpiolibLaura Abbott
The new challenge is to remove VLAs from the kernel (see https://lkml.org/lkml/2018/3/7/621) to eventually turn on -Wvla. Using a kmalloc array is the easy way to fix this but kmalloc is still more expensive than stack allocation. Introduce a fast path with a fixed size stack array to cover most chip with gpios below some fixed amount. The slow path dynamically allocates an array to cover those chips with a large number of gpios. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Phil Reid <preid@electromag.com.au> Reviewed-and-tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-22gpio: include consumer header in gpiolib.hLinus Walleij
We are forward-declaring enum gpiod_flags, but this is not referenced by pointer, it is a real struct member, so we need to actually include it to compile anything including the local gpiolib.h header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-31Merge tag 'gpio-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...
2018-01-12gpio: Export devm_gpiod_get_from_of_node() for consumersLinus Walleij
We have been holding back on adding an API for fetching GPIO handles directly from device nodes, strongly preferring to get it from the spawn devices instead. The fwnode interface however already contains an API for doing this, as it is used for opaque device tree nodes or ACPI nodes for getting handles to LEDs and keys that use GPIO: those are specified as one child per LED/key in the device tree and are not individual devices. However regulators present a special problem as they already have helper functions to traverse the device tree from a regulator node and two levels down to fill in data, and as it already traverses GPIO nodes in its own way, and already holds a pointer to each regulators device tree node, it makes most sense to export an API to fetch the GPIO descriptor directly from the node. We only support the devm_* version for now, hopefully no non-devres version will be needed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22gpio: fix "gpio-line-names" property retrievalChristophe Leroy
Following commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors"), "gpio-line-names" DT property is not retrieved anymore when chip->parent is not set by the driver. This is due to OF based property reads having been replaced by device based property reads. This patch fixes that by making use of fwnode_property_read_string_array() instead of device_property_read_string_array() and handing over either of_fwnode_handle(chip->of_node) or dev_fwnode(chip->parent) to that function. Fixes: 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20gpiolib: constify label in gpio_deviceBartosz Golaszewski
This string is never modified. Make it const. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: gpiolib: Generalise state persistence beyond sleepAndrew Jeffery
General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Add quirks field to struct acpi_gpio_mappingAndy Shevchenko
Some broken ACPI tables might require quirks in the OS. Introduce quirks field in struct acpi_gpio_mapping. Propagate them to struct acpi_gpio_info for further use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Consolidate debug output in acpi_gpio_update_gpiod_flags()Andy Shevchenko
We have the duplicated debug strings printed whenever acpi_gpio_update_gpiod_flags() fails. Instead of doing this by callers, move the debug output inside function. In one case convert almost useless pr_debug() to dev_dbg() where actual consumer of GPIO resource is disclosed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30gpiolib: acpi: Move adev member to struct acpi_gpio_infoAndy Shevchenko
The further improvements are based on this change since struct acpi_gpio_lookup is not available in some cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-20gpio: Fix loose spellingAndrew Jeffery
Literally. I expect "lose" was meant here, rather than "loose", though you could feasibly use a somewhat uncommon definition of "loose" to mean what would be meant by "lose": "Loose the hounds" for instance, as in "Release the hounds". Substituting in "value" for "hounds" gives "release the value", and makes some sense, but futher substituting back to loose gives "loose the value" which overall just seems a bit anachronistic. Instead, use modern, pragmatic English and save a character. Cc: Russell Currey <ruscur@russell.cc> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19gpio: Introduce ->get_multiple callbackLukas Wunner
SPI-attached GPIO controllers typically read out all inputs in one go. If callers desire the values of multipe inputs, ideally a single readout should take place to return the desired values. However the current driver API only offers a ->get callback but no ->get_multiple (unlike ->set_multiple, which is present). Thus, to read multiple inputs, a full readout needs to be performed for every single value (barring driver-internal caching), which is inefficient. In fact, the lack of a ->get_multiple callback has been bemoaned repeatedly by the gpio subsystem maintainer: http://www.spinics.net/lists/linux-gpio/msg10571.html http://www.spinics.net/lists/devicetree/msg121734.html Introduce the missing callback. Add corresponding consumer functions such as gpiod_get_array_value(). Amend linehandle_ioctl() to take advantage of the newly added infrastructure. Update the documentation. Cc: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: replace __maybe_unused in gpiolib.h with static inlineMasahiro Yamada
In header files, static inline is more commonly used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Override GPIO initialization flagsAndy Shevchenko
This allows ACPI GPIO code to modify flags based on ACPI GpioIo() / GpioInt() resources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpiolib: Export gpiod_configure_flags() to internal usersAndy Shevchenko
This is preparatory patch for enabling GPIO ACPI to configure a pin accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: Add new flags to control sleep status of GPIOsCharles Keepax
Add new flags to allow users to specify that they are not concerned with the status of GPIOs whilst in a sleep/low power state. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpiolib: Update documentation of struct acpi_gpio_infoAndy Shevchenko
It seems the code had been changed, but description left untouched. Update description of the struct acpi_gpio_info and relative comments accordingly. Fixes: commit 52044723cd27 ("ACPI / gpio: Add irq_type when a GPIO is used as an interrupt") Cc: Christophe RICARD <christophe.ricard@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24gpio: Rework of_gpiochip_set_names() to use device property accessorsMika Westerberg
In order to use "gpio-line-names" property in systems not having DT as their boot firmware, rework of_gpiochip_set_names() to use device property accessors. This reworked function is placed in a separate file making it clear it deals with universal device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: add missing static inlineLinus Walleij
of_get_named_gpiod_flags() was missing a static inline version when compiling without OF_GPIO. Add this. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: OF: localize some gpiochip init functionsLinus Walleij
of_gpiochip_add() and of_gpiochip_remove() are only used locally in the gpio subsystem so move these functions to the local header. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: acpi: separation of concernsLinus Walleij
The generic GPIO library directly implement code for acpi_find_gpio() which is only used with CONFIG_ACPI. This was probably done because OF did the same thing, but I removed that so remove this too. Rename the internal acpi_find_gpio() in gpiolib-acpi.c to acpi_populate_gpio_lookup() which seems to be more appropriate anyway so as to avoid a namespace clash with the same function. Make the stub return -ENOENT rather than -ENOSYS (as that is for syscalls!). For some reason the sunxi pin control driver was including the private gpiolib header, it works just fine without it so remove that oneliner. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-03gpio: OF: separation of concernsLinus Walleij
The generic GPIO library directly implement code for of_find_gpio() which is only used with CONFIG_OF and causes compilation problems on archs that do not even have stubs for OF functions, especially on UM that does not implement any IO remap functions. Move the function to gpiolib-of.c, implement a static inline stub in gpiolib.h returning PTR_ERR(-ENOENT) if CONFIG_OF_GPIO is not set and be done with it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-26gpio: move gpiod_set_array_value_priv()Linus Walleij
This renames gpiod_set_array_value_priv() to gpiod_set_array_value_complex() and moves it to the gpiolib.h private header file so we can reuse it in the subsystem. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: store reflect the label to userspaceLinus Walleij
The gpio_chip label is useful for userspace to understand what kind of GPIO chip it is dealing with. Let's store a copy of this label in the gpio_device, add it to the struct passed to userspace for GPIO_GET_CHIPINFO_IOCTL and modify lsgpio to show it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16gpio: move the subdriver data pointer into gpio_deviceLinus Walleij
We move to manage this pointer under gpiolib control rather than leave it in the subdevice's gpio_chip. We can not NULL it after gpiochip_remove so at to keep things tight. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16gpio: move the pin ranges into gpio_deviceLinus Walleij
Instead of keeping this reference to the pin ranges in the client driver-supplied gpio_chip, move it to the internal gpio_device as the drivers have no need to inspect this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-11gpio: reflect base and ngpio into gpio_deviceLinus Walleij
Some information about the GPIO chip need to stay around also after the gpio_chip has been removed and only the gpio_device persist. The base and ngpio are such things, for example we don't want a new chip arriving to overlap the number space of a dangling gpio_device, and the chardev may still query the device for the number of lines etc. Note that the code that assigns base and insert gpio_device into the global list no longer check for a missing gpio_chip: we respect the number space allocated by any other gpio_device. As a consequence of the gdev being referenced directly from the gpio_desc, we need to verify it differently from all in-kernel API calls that fall through to direct queries to the gpio_chip vtable: we first check that desc is !NULL, then that desc->gdev is !NULL, then, if desc->gdev->chip is NULL, we *BAIL OUT* without any error, so as to manage the case where operations are requested on a device that is gone. These checks were non-uniform and partly missing in the past: so to simplify: create the macros VALIDATE_DESC() that will return -EINVAL if the desc or desc->gdev is missing and just 0 if the chip is gone, and conversely VALIDATE_DESC_VOID() for the case where the function does not return an error. By using these macros, we get warning messages about missing gdev with reference to the right function in the kernel log. Despite the macro business this simplifies the code and make it more readable than if we copy/paste the same descriptor checking code into all code ABI call sites (IMHO). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-11gpio: move descriptors into gpio_deviceLinus Walleij
We need gpio_device to hold the descriptors so that they can be lifecycled with the struct gpio_device held from userspace. Move the descriptor array into gpio_device. Also rename it from "desc" (singularis) to "descs" (pluralis) to reflect the fact that it is an array. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-11gpio: move sysfs mock device to the gpio_deviceLinus Walleij
Since gpio_device is the struct that survives if the backing gpio_chip is removed, move the sysfs mock device to this state container so it becomes part of the dangling state of the GPIO device on removal. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09gpio: add a userspace chardev ABI for GPIOsLinus Walleij
A new chardev that is to be used for userspace GPIO access is added in this patch. It is intended to gradually replace the horribly broken sysfs ABI. Using a chardev has many upsides: - All operations are per-gpiochip, which is the actual device underlying the GPIOs, making us tie in to the kernel device model properly. - Hotpluggable GPIO controllers can come and go, as this kind of problem has been know to userspace for character devices since ages, and if a gpiochip handle is held in userspace we know we will break something, whereas the sysfs is stateless. - The one-value-per-file rule of sysfs is really hard to maintain when you want to twist more than one knob at a time, for example have in-kernel APIs to switch several GPIO lines at the same time, and this will be possible to do with a single ioctl() from userspace, saving a lot of context switching. We also need to add a new bus type for GPIO. This is necessary for example for userspace coldplug, where sysfs is traversed to find the boot-time device nodes and create the character devices in /dev. This new chardev ABI is *non* *optional* and can be counted on to be present in the future, emphasizing the preference of this ABI. The ABI only implements one single ioctl() to get the name and number of GPIO lines of a chip. Even this is debatable: see it as a minimal example for review. This ABI shall be ruthlessly reviewed and etched in stone. The old /sys/class/gpio is still optional to compile in, but will be deprecated. Unique device IDs are created using IDR, which is overkill and insanely scalable, but also well tested. Cc: Johan Hovold <johan@kernel.org> Cc: Michael Welling <mwelling@ieee.org> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09gpio: refer to gpio device in prints and debugfsLinus Walleij
We use the new struct device inside gpio_chip to related debug prints and warnings, and we also add it to the debugfs dump. Cc: Johan Hovold <johan@kernel.org> Cc: Michael Welling <mwelling@ieee.org> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09gpio: make the gpiochip a real deviceLinus Walleij
GPIO chips have been around for years, but were never real devices, instead they were piggy-backing on a parent device (such as a platform_device or amba_device) but this was always optional. GPIO chips could also exist without any device at all, with its struct device *parent (ex *dev) pointer being set to null. When sysfs was in use, a mock device would be created, with the optional parent assigned, or just floating orphaned with NULL as parent. If sysfs is active, it will use this device as parent. We now create a gpio_device struct containing a real struct device and move the subsystem over to using that. The list of struct gpio_chip:s is augmented to hold struct gpio_device:s and we find gpio_chips:s by first looking up the struct gpio_device. The struct gpio_device is designed to stay around even if the gpio_chip is removed, so as to satisfy users in userspace that need a backing data structure to hold the state of the session initiated with e.g. a character device even if there is no physical chip anymore. From this point on, gpiochips are devices. Cc: Johan Hovold <johan@kernel.org> Cc: Michael Welling <mwelling@ieee.org> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - new driver for eGalaxTouch serial touchscreen - new driver for TS-4800 touchscreen - an update for Goodix touchscreen driver - PS/2 mouse module was reworked to limit number of protocols we try on pass-through ports to speed up their detection time - wacom_w8001 touchscreen driver now reports pen and touch via separate instances of input devices - other driver changes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits) Input: elantech - mark protocols v2 and v3 as semi-mt Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE Input: gpio-keys - fix check for disabling unsupported keys Input: omap-keypad - remove dead check Input: ti_am335x_tsc - fix HWPEN interrupt handling Input: omap-keypad - set tasklet data earlier Input: rohm_bu21023 - fix handling of retrying firmware update Input: ALPS - report v3 pinnacle trackstick device only if is present Input: ALPS - detect trackstick presence for v7 protocol Input: pcap_ts - use to_delayed_work Input: bma150 - constify bma150_cfg structure Input: i8042 - add Fujitsu Lifebook U745 to the nomux list Input: egalax_ts_serial - fix potential NULL dereference on error Input: uinput - sanity check on ff_effects_max and EV_FF Input: uinput - rework ABS validation Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen" Input: goodix - add axis swapping and axis inversion support Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send Input: goodix - add power management support ...
2016-01-01ACPI / gpio: Add irq_type when a GPIO is used as an interruptChristophe RICARD
When a GPIO is used as an interrupt in ACPI, the irq_type was not available for device driver. Make available polarity and triggering information in acpi_find_gpio by renaming acpi_gpio_info field active_low to polarity and adding triggering field (edge/level). For sanity, in gpiolib.c replace info.active_low by "info.polarity == GPIO_ACTIVE_LOW". Set the irq_type if necessary in acpi_dev_gpio_irq_get. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-13gpiolib: tighten up ACPI legacy gpio lookupsDmitry Torokhov
We should not fall back to the legacy unnamed gpio lookup style if the driver requests gpios with different names, because we'll give out the same gpio twice. Let's keep track of the names that were used for the device and only do the fallback for the first name used. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-11gpio: forward-declare enum gpiod_flagsLinus Walleij
This enum is used in the gpiolib.h header file, yet <linux/gpio/consumer.h> is not included so plainly including this file (and some drivers do) will raise compile problems. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpiolib: tighten up ACPI legacy gpio lookupsDmitry Torokhov
We should not fall back to the legacy unnamed gpio lookup style if the driver requests gpios with different names, because we'll give out the same gpio twice. Let's keep track of the names that were used for the device and only do the fallback for the first name used. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-09-24gpio: Introduce gpio descriptor 'name'Markus Pargmann
The latest gpio hogging mechanism assigns each gpio a 'line-name' in the devicetree. The 'name' field is different from the 'label' field. 'label' is only used for requested GPIOs to describe its current use by driver or userspace. The 'name' field describes the GPIO itself, not the use. This is most likely identical to the label in the schematic on the GPIO line and should help to find this particular GPIO. This is equivalent to the gpiochip->names array. However names should be stored in the GPIO descriptor. We will use gpiochip->names in the future only as initializer for the GPIO descriptors for drivers that assign GPIO names hardcoded. All other GPIO names will be parsed from DT and directly assigned to the GPIO descriptor. This patch adds a helper function to find gpio descriptors by name instead of gpio number. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>