summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2024-01-04gpiolib: replace the GPIO device mutex with a read-write semaphoreBartosz Golaszewski
There are only two spots where we modify (add to or remove objects from) the GPIO device list. Readers should be able to access it concurrently. Replace the mutex with a read-write semaphore and adjust the locking operations accordingly. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-04gpiolib: remove the GPIO device from the list when it's unregisteredBartosz Golaszewski
If we wait until the GPIO device's .release() callback gets invoked before we remove it from the global device list, then we risk that someone will look it up using gpio_device_find() between where we dropped the last reference and before .release() is done taking a reference again to an object that's being released. The device must be removed when it's being unregistered - just like how we remove it from the GPIO bus. Fixes: ff2b13592299 ("gpio: make the gpiochip a real device") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-03gpio: nuvoton: Add Nuvoton NPCM sgpio driverJim Liu
Add Nuvoton BMC NPCM7xx/NPCM8xx sgpio driver support. Nuvoton NPCM SGPIO module is combine serial to parallel IC (HC595) and parallel to serial IC (HC165), and use APB3 clock to control it. This interface has 4 pins (D_out , D_in, S_CLK, LDSH). BMC can use this driver to increase 64 GPI pins and 64 GPO pins to use. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-01-03gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCsTzuyi Chang
This driver enables configuration of GPIO direction, GPIO values, GPIO debounce settings and handles GPIO interrupts. Signed-off-by: Tzuyi Chang <tychang@realtek.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-01-03gpio: pmic-eic-sprd: Configure the bit corresponding to the EIC through offsetWenhua Lin
A bank PMIC EIC contains 16 EICs, and the operating registers are BIT0-BIT15, such as BIT0 of the register operated by EIC0. Using the one-dimensional array reg[CACHE_NR_REGS] for maintenance will cause the configuration of other EICs to be affected when operating a certain EIC. In order to solve this problem, configure the bit corresponding to the EIC through offset. Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-01-02gpio: dwapb: Use generic request, free and set_configEmil Renner Berthing
This way GPIO will be denied on pins already claimed by other devices and basic pin configuration (pull-up, pull-down etc.) can be done through the userspace GPIO API. Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27gpio: sysfs: drop tabs from local variable declarationsBartosz Golaszewski
Older code has an annoying habit of putting tabs between the type and the name of the variable. This doesn't really add to readability and newer code doesn't do it so make the entire file consistent. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-27gpiolib: drop tabs from local variable declarationsBartosz Golaszewski
Older code has an annoying habit of putting tabs between the type and the name of the variable. This doesn't really add to readability and newer code doesn't do it so make the entire file consistent. While at it: convert 'unsigned' to 'unsigned int'. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-27gpiolib: remove extra_checksBartosz Golaszewski
extra_checks is only used in a few places. It also depends on a non-standard DEBUG define one needs to add to the source file. The overhead of removing it should be minimal (we already use pure might_sleep() in the code anyway) so drop it. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27gpio: tps65219: don't use CONFIG_DEBUG_GPIOBartosz Golaszewski
CONFIG_DEBUG_GPIO should only be used to enable debug log messages and for core GPIOLIB debugging. Don't use it to control the execution of potentially buggy code. Just put it under an always-false #if. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27gpiolib: cdev: replace locking wrappers for gpio_device with guardsKent Gibson
Replace the wrapping functions that inhibit removal of the gpio chip with equivalent guards. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27gpiolib: cdev: replace locking wrappers for config_mutex with guardsKent Gibson
After the adoption of guard(), the locking wrappers that hold the config_mutex for linereq_set_values() and linereq_set_config() no longer add value, so combine them into the functions they wrap. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27gpiolib: cdev: allocate linereq using kvzalloc()Kent Gibson
The size of struct linereq may exceed a page, so allocate space for it using kvzalloc() instead of kzalloc() to handle the case where memory is heavily fragmented and kzalloc() cannot find a sufficient contiguous region. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27gpiolib: cdev: include overflow.hKent Gibson
struct_size() is used to calculate struct linereq size, so explicitly include overflow.h. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27Merge tag 'v6.7-rc7' into gpio/for-nextBartosz Golaszewski
Linux 6.7-rc7
2023-12-21gpio: dwapb: mask/unmask IRQ when disable/enale itxiongxin
In the hardware implementation of the I2C HID driver based on DesignWare GPIO IRQ chip, when the user continues to use the I2C HID device in the suspend process, the I2C HID interrupt will be masked after the resume process is finished. This is because the disable_irq()/enable_irq() of the DesignWare GPIO driver does not synchronize the IRQ mask register state. In normal use of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions are called in pairs. In case of an exception, i2c_hid_core_suspend() calls disable_irq() to disable the GPIO IRQ. With low probability, this causes irq_unmask() to not be called, which causes the GPIO IRQ to be masked and not unmasked in enable_irq(), raising an exception. Add synchronization to the masked register state in the dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ before disabling it. After enabling the GPIO IRQ, unmask the IRQ. Fixes: 7779b3455697 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block") Cc: stable@kernel.org Co-developed-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Signed-off-by: xiongxin <xiongxin@kylinos.cn> Acked-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-21gpiolib: cdev: add gpio_device locking wrapper around gpio_ioctl()Kent Gibson
While the GPIO cdev gpio_ioctl() call is in progress, the kernel can call gpiochip_remove() which will set gdev->chip to NULL, after which any subsequent access will cause a crash. gpio_ioctl() was overlooked by the previous fix to protect syscalls (bdbbae241a04), so add protection for that. Fixes: bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space") Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines") Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL") Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-19gpiolib: cdev: reduce locking in gpio_desc_to_lineinfo()Kent Gibson
Reduce the time holding the gpio_lock by snapshotting the desc flags, rather than testing them individually while holding the lock. Accept that the calculation of the used field is inherently racy, and only check the availability of the line from pinctrl if other checks pass, so avoiding the check for lines that are otherwise in use. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-19gpiolib: cdev: improve documentation of get/set valuesKent Gibson
Add documentation of the algorithm used to perform scatter/gather of the requested lines and values in linereq_get_values() and linereq_set_values_unlocked() to improve maintainability. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-19gpiolib: cdev: fully adopt guard() and scoped_guard()Kent Gibson
Use guard() or scoped_guard() for critical sections rather than discrete lock/unlock pairs. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-19gpiolib: remove debounce_period_us from struct gpio_descKent Gibson
cdev is the only user of the debounce_period_us field in struct gpio_desc, and it no longer uses it, so remove it. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-19gpiolib: cdev: relocate debounce_period_us from struct gpio_descKent Gibson
Store the debounce period for a requested line locally, rather than in the debounce_period_us field in the gpiolib struct gpio_desc. Add a global tree of lines containing supplemental line information to make the debounce period available to be reported by the GPIO_V2_GET_LINEINFO_IOCTL and the line change notifier. Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-18Merge tag 'intel-gpio-v6.8-1' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next intel-gpio for v6.8-1 * Use RAII for locking in the Tangier family of drivers (Raag) * Update Tangier family of drivers to use new PM helpers (Raag) The following is an automated git shortlog grouped by driver: elkhartlake: - reuse pm_ops from Intel Tangier driver tangier: - simplify locking using cleanup helpers - unexport suspend/resume handles - use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper
2023-12-18gpio: mmio: Clean up headersAndy Shevchenko
There is a few things done: - include only the headers we are direct user of - add missing headers - group generic headers and subsystem headers - sort each group alphabetically Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-18gpio: mmio: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-18gpiolib: use a mutex to protect the list of GPIO devicesBartosz Golaszewski
The global list of GPIO devices is never modified or accessed from atomic context so it's fine to protect it using a mutex. Add a new global lock dedicated to the gpio_devices list and use it whenever accessing or modifying it. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-18gpiolib: rename static functions that are called with the lock takenBartosz Golaszewski
Rename two functions that read or modify the global GPIO device list but don't take the lock themselves (and need to be called with it already acquired). Use the _unlocked() suffix which seems to be used quite consistently across the kernel despite there also existing the _locked() suffix for the same purpose. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-18gpio: xilinx: remove excess kernel docBartosz Golaszewski
The irqchip field has been removed from struct xgpio_instance so remove the doc as well. Fixes: b4510f8fd5d0 ("gpio: xilinx: Convert to immutable irq_chip") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312150239.IyuTVvrL-lkp@intel.com/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2023-12-15gpiolib: allocate memory atomically with a spinlock heldBartosz Golaszewski
We will eventually switch to protecting the GPIO descriptors with a mutex but until then, we need to allocate memory for the label copy atomically while we're holding the global spinlock. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-gpio/62588146-eed6-42f7-ba26-160226b109fe@moroto.mountain/T/#u Fixes: f8d05e276b45 ("gpiolib: remove gpiochip_is_requested()") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-08gpio: sim: implement the dbg_show() callbackBartosz Golaszewski
Provide a custom implementation of the dbg_show() callback that prints all requested lines together with their label, direction, value and bias. This improves the code coverage of GPIOLIB. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-08Merge tag 'gpio-remove-gpiochip_is_requested-for-v6.8-rc1' into gpio/for-nextBartosz Golaszewski
gpio: remove gpiochip_is_requested() - provide a safer alternative to gpiochip_is_requested() - convert all existing users - remove gpiochip_is_requested()
2023-12-08gpiolib: remove gpiochip_is_requested()Bartosz Golaszewski
We have no external users of gpiochip_is_requested(). Let's remove it and replace its internal calls with direct testing of the REQUESTED flag. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-08gpio: stmpe: use gpiochip_dup_line_label()Bartosz Golaszewski
Use the new gpiochip_dup_line_label() helper to safely retrieve the descriptor label. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-08gpio: wm8994: use gpiochip_dup_line_label()Bartosz Golaszewski
Use the new gpiochip_dup_line_label() helper to safely retrieve the descriptor label. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-08gpio: wm831x: use gpiochip_dup_line_label()Bartosz Golaszewski
Use the new gpiochip_dup_line_label() helper to safely retrieve the descriptor label. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-08gpiolib: provide gpiochip_dup_line_label()Bartosz Golaszewski
gpiochip_is_requested() not only has a misleading name but it returns a pointer to a string that is freed when the descriptor is released. Provide a new helper meant to replace it, which returns a copy of the label string instead. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-07gpio: sim: fix the email address in MODULE_AUTHOR()Bartosz Golaszewski
Fix unterminated angle brackets in the email address in MODULE_AUTHOR(). Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-07gpio: max730x: don't use kernel-doc marker for regular commentRandy Dunlap
Use a common C comment (/*) instead of kernel-doc notation to prevent warnings from scripts/kernel-doc. gpio-max730x.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst gpio-max730x.c:3: warning: missing initial short description on line: * Copyright (C) 2006 Juergen Beisert, Pengutronix Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-01gpio: ixp4xx: Handle clock output on pin 14 and 15Linus Walleij
This makes it possible to provide basic clock output on pins 14 and 15. The clocks are typically used by random electronics, not modeled in the device tree, so they just need to be provided on request. In order to not disturb old systems that require that the hardware defaults are kept in the clock setting bits, we only manipulate these if either device tree property is present. Once we know a device needs one of the clocks we can set it in the device tree. Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-01gpiolib: sysfs: Fix error handling on failed exportBoerge Struempfel
If gpio_set_transitory() fails, we should free the GPIO again. Most notably, the flag FLAG_REQUESTED has previously been set in gpiod_request_commit(), and should be reset on failure. To my knowledge, this does not affect any current users, since the gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted to 0. However the gpio_set_transitory() function calles the .set_config() function of the corresponding GPIO chip and there are some GPIO drivers in which some (unlikely) branches return other values like -EPROBE_DEFER, and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not be reset, which results in the pin being blocked until the next reboot. Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep") Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-11-28gpio: sysfs: fix forward declaration of struct gpio_deviceBartosz Golaszewski
The forward declaration for struct gpio_device should be provided for both branches of the #ifdef. Fixes: 08a149c40bdb ("gpiolib: Clean up headers") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-24Merge branch 'gpio/device_get_label_for_pinctrl' into gpio/for-nextBartosz Golaszewski
Pull in the immutable branch between GPIO and pinctrl adding a new getter allowing to retrieve the label of a GPIO device.
2023-11-24gpiolib: provide gpio_device_get_label()Bartosz Golaszewski
Provide a getter for the GPIO device label string so that users don't have to dereference struct gpio_chip directly. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-11-20gpio: mockup: initialize a managed pointer in placeBartosz Golaszewski
The preferred pattern for autopointers is to initialize them when they're declared unless it doesn't make sense. Move the declaration of the managed device pointer to where it's initialized. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-11-20gpio: tangier: simplify locking using cleanup helpersRaag Jadav
Use lock guards from cleanup.h to simplify locking. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-15gpio: sifive: remove unneeded call to platform_set_drvdata()Andrei Coardos
This function call was found to be unnecessary as there is no equivalent platform_get_drvdata() call to access the private data of the driver. Also, the private data is defined in this driver, so there is no risk of it being accessed outside of this driver file. Reviewed-by: Alexandru Ardelean <alex@shruggie.ro> Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-11-13gpio: tangier: unexport suspend/resume handlesRaag Jadav
Unexport suspend/resume handles for the lack of external users and while at it, make them static, so that they can be discarded by the compiler if not used (CONFIG_PM_SLEEP=n). Signed-off-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20231113131600.10828-4-raag.jadav@intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13gpio: elkhartlake: reuse pm_ops from Intel Tangier driverRaag Jadav
Reuse tng_gpio_pm_ops from Intel Tangier driver instead of calling them through a local copy. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20231113131600.10828-3-raag.jadav@intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13gpio: tangier: use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helperRaag Jadav
Use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper to export pm_ops to GPIO_TANGIER namespace, so that they can be reused. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20231113131600.10828-2-raag.jadav@intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-09Merge tag 'pwm/for-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This contains a few fixes and a bunch of cleanups, a lot of which is in preparation for Uwe's character device support that may be ready in time for the next merge window" * tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: samsung: Document new member .channel in struct samsung_pwm_chip pwm: bcm2835: Add support for suspend/resume pwm: brcmstb: Checked clk_prepare_enable() return value pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume pwm: pxa: Explicitly include correct DT includes pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe() pwm: samsung: Consistently use the same name for driver data pwm: vt8500: Simplify using devm functions pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe() pwm: sprd: Provide a helper to cast a chip to driver data pwm: spear: Simplify using devm functions pwm: mtk-disp: Simplify using devm_pwmchip_add() pwm: imx-tpm: Simplify using devm functions pwm: brcmstb: Simplify using devm functions pwm: bcm2835: Simplify using devm functions pwm: bcm-iproc: Simplify using devm functions pwm: Adapt sysfs API documentation to reality pwm: dwc: add PWM bit unset in get_state call pwm: dwc: make timer clock configurable pwm: dwc: split pci out of core driver ...
generated by cgit (git 2.34.1) at 2025-03-19 18:46:04 +0000