summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2017-07-03gpio-exar/8250-exar: Make set of exported GPIOs configurableJan Kiszka
On the SIMATIC, IOT2040 only a single pin is exportable as GPIO, the rest is required to operate the UART. To allow modeling this case, expand the platform device data structure to specify a (consecutive) pin subset for exporting by the gpio-exar driver. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-07-03gpio-exar/8250-exar: Rearrange gpiochip parenthoodJan Kiszka
Set the parent of the exar gpiochip to its platform device, like other gpiochips are doing it. In order to keep the relationship discoverable for ACPI systems, set the platform device companion to the PCI device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio: exar: Fix iomap requestJan Kiszka
The UART driver already maps the resource for us. Trying to do this here only fails and leaves us with a non-working device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cardsJan Kiszka
Commtech adapters need the MPIOs for internal purposes, and the gpio-exar driver already refused to pick them up. But there is actually no point in even creating the underlying platform device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29gpio: acpi: Skip _AEI entries without a handler rather then aborting the scanHans de Goede
acpi_walk_resources will stop as soon as the callback passed in returns an error status. On a x86 tablet I have the first GpioInt in the _AEI resource list has no handler defined in the DSDT, causing acpi_walk_resources to abort scanning the rest of the resource list, which does define valid ACPI GPIO events. This commit changes the return for not finding a handler from AE_BAD_PARAMETER to AE_OK so that the rest of the resource list will get scanned normally in case of missing event handlers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29Merge tag 'v4.12-rc7' into develLinus Walleij
Linux 4.12-rc7
2017-06-29gpio: rcar: Add R8A7743 (RZ/G1M) supportBiju Das
Renesas RZ/G1M (R8A7743) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29gpio: gpio-wcove: Fix GPIO control register offset calculationKuppuswamy Sathyanarayanan
According to Whiskey Cove PMIC GPIO controller specification, for GPIO pins 0-12, GPIO input and output register control address range from, 0x4e44-0x4e50 for GPIO outputs control register 0x4e51-0x4e5d for GPIO input control register But, currently when calculating the GPIO register offsets in to_reg() function, all GPIO pins in the same bank uses the same GPIO control register address. This logic is incorrect. This patch fixes this issue. This patch also adds support to selectively skip register modification for virtual GPIOs. In case of Whiskey Cove PMIC, ACPI code may use up 94 virtual GPIOs. These virtual GPIOs are used by the ACPI code as means to access various non GPIO bits of PMIC. So for these virtual GPIOs, we don't need to manipulate the physical GPIO pin register. A similar patch has been merged recently by Hans for Crystal Cove PMIC GPIO driver. You can find more details about it in Commit 9a752b4c9ab9 ("gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs") Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reported-by: Jukka Laitinen <jukka.laitinen@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29gpiolib: fix filtering out unwanted eventsBartosz Golaszewski
GPIOEVENT_REQUEST_BOTH_EDGES is not a single flag, but a binary OR of GPIOEVENT_REQUEST_RISING_EDGE and GPIOEVENT_REQUEST_FALLING_EDGE. The expression 'le->eflags & GPIOEVENT_REQUEST_BOTH_EDGES' we'll get evaluated to true even if only one event type was requested. Fix it by checking both RISING & FALLING flags explicitly. Cc: stable@vger.kernel.org Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-21gpio: lp87565: Add support for GPIOKeerthy
Add driver for lp87565 PMIC family GPIOs. Three GPIOs are supported and can be configured in Open-drain output or Push-pull output. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-21gpio: dwapb: fix missing first irq for edgeboth irq typeXiaoguang Chen
dwapb_irq_set_type overwrites polarity register value for IRQ_TYPE_EDGE_BOTH case. If the polarity of one gpio is 0 by default, then it will set falling edge irq trigger. and the gpio may requires rising edge irq for the first time, and it will be missed. Do not overwrite polarity register for IRQ_TYPE_EDGE_BOTH case can solve this issue. Signed-off-by: Xiaoguang Chen <xgchenshy@gmail.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> [Fix some really weird text encoding problem] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mvebu: change compatible string for PWM supportRalph Sennhauser
As it turns out more than just Armada 370 and XP support using GPIO lines as PWM lines. For example the Armada 38x family has the same hardware support. As such "marvell,armada-370-xp-gpio" for the compatible string is a misnomer. Change the compatible string to "marvell,armada-370-gpio" before the driver makes it out of the -rc stage. This also follows the practice of using only the first device family supported as part of the name. Also update the documentation and comments in the code accordingly. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: exar: Fix reading of directions and valuesJan Kiszka
First, the logic for translating a register bit to the return code of exar_get_direction and exar_get_value were wrong. And second, there was a flip regarding the register bank in exar_get_direction. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: exar: Allocate resources on behalf of the platform deviceJan Kiszka
Do not allocate resources on behalf of the parent device but on our own. Otherwise, cleanup does not properly work if gpio-exar is removed but not the parent device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio-exar/8250-exar: Fix passing in of parent PCI deviceJan Kiszka
This fixes reloading of the GPIO driver for the same platform device instance as created by the exar UART driver: First of all, the driver sets drvdata to its own value during probing and does not restore the original value on exit. But this won't help anyway as the core clears drvdata after the driver left. Set the platform device parent instead. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: use devm_kcalloc() where applicableBartosz Golaszewski
When allocating a zeroed array of objects use devm_kcalloc() instead of manually calculating the required size and using devm_kzalloc(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: add myself as authorBartosz Golaszewski
Just taking credit for the recent changes and new features. :) Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: improve the error messageBartosz Golaszewski
Indicate the error number and make the message a bit more elaborate. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: don't return magic numbers from probe()Bartosz Golaszewski
When the requested number of GPIO lines is 0, return -EINVAL, not -1 which is -EPERM. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: improve readabilityBartosz Golaszewski
We currently shift bits here and there without actually explaining what we're doing. Add some helper variables with names indicating their purpose to improve the code readability. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: refuse to accept an odd number of GPIO rangesBartosz Golaszewski
Currently we ignore the last odd range value, since each chip is described by two values. Be more strict and require the user to pass an even number of ranges. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: tweak gpio_mockup_event_write()Bartosz Golaszewski
Invert the logic of the irq_enabled check and only access the private data after the input is sanitized. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: improve the debugfs input sanitizationBartosz Golaszewski
We're currently only checking the first character of the input to the debugfs event files, so a string like '0sdfdsf' is valid and indicates a falling edge event. Be more strict and only allow '0', '1', '0\n' & '1\n'. While we're at it: move the sanitization code before the irq_enabled check so that we indicate an error on invalid input even if nobody is waiting for events. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-19mfd: intel_soc_pmic_bxtwc: Remove second level IRQ for gpio deviceKuppuswamy Sathyanarayanan
Currently all PMIC GPIO domain IRQs are consumed by the same device(bxt_wcove_gpio), so there is no need to export them as separate interrupts. We can just export only the first level GPIO IRQ(BXTWC_GPIO_LVL1_IRQ) as an IRQ resource and let the GPIO device driver(bxt_wcove_gpio) handle the GPIO sub domain IRQs based on status value of GPIO level2 interrupt status register. Also, just using only the first level IRQ will eliminate the bug involved in requesting only the second level IRQ and not explicitly enable the first level IRQ. For more info on this issue please read the details at, https://lkml.org/lkml/2017/2/27/148 This patch also makes relevant change in Whiskey cove GPIO driver to use only first level PMIC GPIO IRQ. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-16gpio: mvebu: Add support for the Armada 7K/8K SoCsGregory CLEMENT
The Armada 7K and 8K SoCs use the same gpio controller as most of the other mvebu SoCs. However, the main difference is that the GPIO controller is part of a bigger system controller, and a syscon is used to control the overall system controller. Therefore, the driver needs to be adjusted to retrieve the regmap of the syscon to access registers, and account for the fact that registers are located at a certain offset within the regmap. This commit add the support of the syscon and introduce a new variant for this case. It was based on the preliminary work of Thomas Petazzoni. Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: mvebu: fix regmap_update_bits usageGregory CLEMENT
In some place in the driver regmap_update_bits was misused. Indeed the last argument is not the value of the bit (or group of bits) itself but the mask value inside the register. So when setting the bit N, then the value must be BIT(N) and not 1. CC: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: zynq: Clarify quirk and provide helper functionSoren Brinkmann
The one quirk used in the zynq GPIO driver was called FOO which is not very descriptive. Rename the quirk to IS_ZYNQ as it indicates whether the HW is a zynq or zynqmp device to allow handling of device-specific differences of the HW. Also provide a helper function to test whether the HW is zynq or zynqmp. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: merrifield: Remove unused headerAndy Shevchenko
I don't remember how linux/gpio.h made the source, now it seems unused. Remove it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: of: Spelling: s/retures/returns/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: use class_groups instead of class_attrsGreg Kroah-Hartman
The class_attrs pointer is long depreciated, and is about to be finally removed, so move to use the class_groups pointer instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: <linux-gpio@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09gpio: mvebu: fix gpio bank registration when pwm is usedRichard Genoud
If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix blink counter register selectionRichard Genoud
The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-31gpio: xra1403: select REGMAP_SPIArnd Bergmann
Without the regmap code, we get a link error: drivers/gpio/built-in.o: In function `xra1403_probe': (.text+0x132e0): undefined reference to `__devm_regmap_init_spi' Fixes: 5704520d7880 ("gpio: xra1403: Add EXAR XRA1403 SPI GPIO expander driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-31gpiolib: remove unused variableArnd Bergmann
This was left behind by a cleanup patch: drivers/gpio/gpiolib.c: In function 'gpiochip_irqchip_init_valid_mask': drivers/gpio/gpiolib.c:1474:6: error: unused variable 'i' [-Werror=unused-variable] Fixes: 923a654c186c ("gpiolib: Re-use bitmap_fill() instead of open coded loop") Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Colin King <colin.king@canonical.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio/pinctrl: ingenic: depend on OFLinus Walleij
Fix compile errors due to missing OF. Cc: Paul Cercueil <paul@crapouillou.net> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: adp5588: move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: ml-ioh: check the return value of irq_alloc_generic_chip()Bartosz Golaszewski
This function can fail, so check the return value before dereferencing the returned pointer. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: sta2x11: check the return value of irq_alloc_generic_chip()Bartosz Golaszewski
This function can fail, so check the return value before dereferencing the returned pointer. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: pch: check the return value of irq_alloc_generic_chip()Bartosz Golaszewski
This function can fail, so check the return value before dereferencing the returned pointer. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: mockup: support irqmask and irqunmaskBartosz Golaszewski
Even though this is a testing module, be nice and actually implement these functions. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: mockup: be quiet unless something goes wrongBartosz Golaszewski
When inserting and removing the module repeatedly (e.g. when running the libgpiod test-suite) the kernel log gets clobbered with messages reporting successful creation of dummy gpiochips. Remove this message and only emit logs when something bad happens. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: mockup: add prefixes to the direction enumBartosz Golaszewski
All internal symbols except for the direction enum follow the same convention and use the gpio_mockup prefix. Add the prefix to the DIR_IN and DIR_OUT definitions as well for consistency across the file. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: mockup: fix direction valuesBartosz Golaszewski
The comment in linux/gpio/driver.h says: @get_direction: returns direction for signal "offset", 0=out, 1=in We got those switched at some point. Fix the values. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpiolib: Re-use bitmap_fill() instead of open coded loopAndy Shevchenko
Re-use bitmap_fill() instead of open coded loop for setting an area of bits in a bitmap. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Split out acpi_gpio_get_irq_resource() helperAndy Shevchenko
The helper does retrieve pointer to struct acpi_resource_gpio from struct acpi_resource if it represents GpioInt() resource. It will be used by PNP code later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Override GPIO initialization flagsAndy Shevchenko
This allows ACPI GPIO code to modify flags based on ACPI GpioIo() / GpioInt() resources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Factor out acpi_gpio_to_gpiod_flags() helperAndy Shevchenko
The helper function acpi_gpio_to_gpiod_flags() will be used later to configure pin properly whenever it's requested. While here, introduce a checking error code returned by gpiod_configure_flags() and bail out if it's not okay. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Synchronize acpi_find_gpio() and acpi_gpio_count()Andy Shevchenko
If we pass connection ID to the both functions and at the same time acpi_can_fallback_to_crs() returns false we will get different results, i.e. the number of GPIO resources returned by acpi_gpio_count() might be not correct. Fix this by calling acpi_can_fallback_to_crs() in acpi_gpio_count() before trying to fallback. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Even more tighten up ACPI GPIO lookupsAndy Shevchenko
The commit 10cf4899f8af ("gpiolib: tighten up ACPI legacy gpio lookups") prevents to getting same resource twice if the driver asks twice using different connection ID. But the whole idea of fallback might bring some problems. Imagine the case when we have two versions of BIOS/hardware where in one _DSD is introduced along with GPIO resources, but the other one uses just plain GPIO resource for another purpose Case 1: Device (DEVX) { ... Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"some-gpios", Package() {^DEVX, 0, 0, 0 }}, } }) } Case 2: Device (DEVX) { ... Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27} }) } To prevent the possible misconfiguration tighten up even more GPIO ACPI lookups for case without connection ID provided. In the past the issue had been triggered by "use mctrl_gpio helpers" series [1,2]. [1] commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers") [2] https://patchwork.kernel.org/patch/9283745/ Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bastien Nocera <hadess@hadess.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: acpi: Do sanity check for GpioInt in acpi_find_gpio()Andy Shevchenko
Check that we don't ask for output direction on GpioInt resource in cases with or without _DSD defined. Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>