summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2017-08-02gpio: tegra: fix unbalanced chained_irq_enter/exitMichał Mirosław
When more than one GPIO IRQs are triggered simultaneously, tegra_gpio_irq_handler() called chained_irq_exit() multiple times for one chained_irq_enter(). Fixes: 3c92db9ac0ca3eee8e46e2424b6c074e2e394ad9 Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> [Also changed the variable to a bool] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01gpiolib: skip unwanted events, don't convert them to opposite edgeBartosz Golaszewski
The previous fix for filtering out of unwatched events was not entirely correct. Instead of skipping the events we don't want, they are now interpreted as events with opposing edge. In order to fix it: always read the GPIO line value on interrupt and only emit the event if it corresponds with the event type we requested. Cc: stable@vger.kernel.org Fixes: ad537b822577 ("gpiolib: fix filtering out unwanted events") Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01gpio: exar: Use correct property prefix and document bindingsJan Kiszka
The device-specific property should be prefixed with the vendor name, not "linux,", as Linus Walleij pointed out. Change this and document the bindings of this platform device. We didn't ship the old binding in a release yet. So we can still change it without breaking an official API. Fixes: 380b1e2f3a2f ("gpio-exar/8250-exar: Make set of exported GPIOs configurable") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01gpio: gpio-mxc: Fix: higher 16 GPIOs usable as wake sourcePhilipp Rosenberger
In the function gpio_set_wake_irq(), port->irq_high is only checked for zero. As platform_get_irq() returns a value less then zero if no interrupt was found, any gpio >= 16 was handled like an irq_high interrupt was available. On iMX27 for example no high interrupt is available. This lead to the problem that only some gpios (the lower 16) were useable as wake sources. Signed-off-by: Philipp Rosenberger <p.rosenberger@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-01gpio: xgene-sb: select IRQ_DOMAIN_HIERARCHYMasahiro Yamada
This driver calls irq_domain_hierarchy() and irq_chip_*_parent(). They are available only when CONFIG_IRQ_DOMAIN_HIERARCHY is enabled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-31gpio: lp87565: Set proper output level and direction for direction_outputAxel Lin
The value argument of lp87565_gpio_direction_output() means output level rather than gpio direction. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-07Merge (most of) tag 'mfd-next-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Intel Cherry Trail Whiskey Cove PMIC - TI LP87565 PMIC New Device Support: - Add support for Cannonlake to intel-lpss-pci - Add support for Simatic IOT2000 to intel_quark_i2c_gpio New Functionality: - Add Regulator support (axp20x) Fix-ups: - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec) - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core) - Provide deregistration on unbind (rn5t618) - Rework DT code/documentation (arizona) - Constify things (fsl-imx25-tsadc) - MAINTAINERS updates (DA9062/61) - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C) - Switch to DMI matching (intel_quark_i2c_gpio) - Provide an appropriate level of error checking (wm831x-{i2c,spi}, twl4030-irq, tc6393xb) - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc, stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc, exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099, motorola-cpcap)" [ Skipped the last commit in that series that added eight thousand lines of pointless repeated register definitions. - Linus ] * tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits) mfd: Add LP87565 PMIC support mfd: cros_ec: Free IRQ on exit dt-bindings: vendor-prefixes: Add arctic to vendor prefix mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: axp20x-i2c: Document that this must be builtin on x86 mfd: Add Cherry Trail Whiskey Cove PMIC driver mfd: tc6393xb: Handle return value of clk_prepare_enable mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency mfd: motorola-cpcap: Use devm_of_platform_populate() mfd: smsc-ece: Use devm_of_platform_populate() mfd: qcom-spmi-pmic: Use devm_of_platform_populate() mfd: palmas: Use devm_of_platform_populate() mfd: exynos: Use devm_of_platform_populate() mfd: fsl-imx25: Use devm_of_platform_populate() mfd: cros_ec: Use devm_of_platform_populate() mfd: atmel: Use devm_of_platform_populate() mfd: stm32-timers: Use devm_of_platform_populate() mfd: intel_soc_pmic: Select designware i2c-bus driver ...
2017-07-07Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
2017-07-06Merge tag 'pinctrl-v4.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.13 series: Core: - The documentation is moved over to RST. - We now have agreed bindings for enabling input and output buffers without actually enabling input and/or output on a pin. We are chiseling out some details of pin control electronics. New drivers: - ZTE ZX - Renesas RZA1 - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree to use this pin controller and consolidate earlier spread out code. - Microschip MCP23S08: this driver is migrated from the GPIO subsystem and totally rewritten to use proper pin control. All users are switched over. New subdrivers: - Renesas R8A7743 and R8A7745. - Allwinner Sunxi A83T R_PIO. - Marvell MVEBU Armada CP110 and AP806. - Intel Cannon Lake PCH. - Qualcomm IPQ8074. Notable improvements: - IRQ support on the Marvell MVEBU Armada 37xx. - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM. - Rockchip driver now supports iomux-route switching for RK3228, RK3328 and RK3399. - Rockchip A10 and A20 are merged into a single driver. - STM32 has improved GPIO support. - Samsung Exynos drivers are split per ARMv7 and ARMv8. - Marvell MVEBU is converted to use regmap for register access. Maintenance: - Several Renesas SH-PFC refactorings and updates. - Serious code size cut for Mediatek MT7623. - Misc janitorial and MAINTAINERS fixes" * tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits) pinctrl: samsung: Remove bogus irq_[un]mask from resource management pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static pinctrl: rza1: Remove unneeded wrong check for wrong variable pinctrl: qcom: Add ipq8074 pinctrl driver pinctrl: freescale: imx7d: make of_device_ids const. pinctrl: DT: extend the pinmux property to support integers array pinctrl: generic: Add output-enable property pinctrl: armada-37xx: Fix number of pin in sdio_sb pinctrl: armada-37xx: Fix uart2 group selection register mask pinctrl: bcm2835: Avoid warning from __irq_do_set_handler pinctrl: sh-pfc: r8a7795: Add PWM support MAINTAINERS: Add Qualcomm pinctrl drivers section arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header dt-bindings: pinctrl: Add RZ/A1 bindings doc pinctrl: Renesas RZ/A1 pin and gpio controller pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups pinctrl.txt: move it to the driver-api book pinctrl: ingenic: checking for NULL instead of IS_ERR() pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20 pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11 ...
2017-07-03Merge tag 'driver-core-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ...
2017-07-03gpio-exar/8250-exar: Make set of exported GPIOs configurableJan Kiszka
On the SIMATIC, IOT2040 only a single pin is exportable as GPIO, the rest is required to operate the UART. To allow modeling this case, expand the platform device data structure to specify a (consecutive) pin subset for exporting by the gpio-exar driver. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-07-03gpio-exar/8250-exar: Rearrange gpiochip parenthoodJan Kiszka
Set the parent of the exar gpiochip to its platform device, like other gpiochips are doing it. In order to keep the relationship discoverable for ACPI systems, set the platform device companion to the PCI device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio: exar: Fix iomap requestJan Kiszka
The UART driver already maps the resource for us. Trying to do this here only fails and leaves us with a non-working device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-03gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cardsJan Kiszka
Commtech adapters need the MPIOs for internal purposes, and the gpio-exar driver already refused to pick them up. But there is actually no point in even creating the underlying platform device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29gpio: acpi: Skip _AEI entries without a handler rather then aborting the scanHans de Goede
acpi_walk_resources will stop as soon as the callback passed in returns an error status. On a x86 tablet I have the first GpioInt in the _AEI resource list has no handler defined in the DSDT, causing acpi_walk_resources to abort scanning the rest of the resource list, which does define valid ACPI GPIO events. This commit changes the return for not finding a handler from AE_BAD_PARAMETER to AE_OK so that the rest of the resource list will get scanned normally in case of missing event handlers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29Merge tag 'v4.12-rc7' into develLinus Walleij
Linux 4.12-rc7
2017-06-29gpio: rcar: Add R8A7743 (RZ/G1M) supportBiju Das
Renesas RZ/G1M (R8A7743) SoC GPIO blocks are identical to the R-Car Gen2 family. Add support for its GPIO controllers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29gpio: gpio-wcove: Fix GPIO control register offset calculationKuppuswamy Sathyanarayanan
According to Whiskey Cove PMIC GPIO controller specification, for GPIO pins 0-12, GPIO input and output register control address range from, 0x4e44-0x4e50 for GPIO outputs control register 0x4e51-0x4e5d for GPIO input control register But, currently when calculating the GPIO register offsets in to_reg() function, all GPIO pins in the same bank uses the same GPIO control register address. This logic is incorrect. This patch fixes this issue. This patch also adds support to selectively skip register modification for virtual GPIOs. In case of Whiskey Cove PMIC, ACPI code may use up 94 virtual GPIOs. These virtual GPIOs are used by the ACPI code as means to access various non GPIO bits of PMIC. So for these virtual GPIOs, we don't need to manipulate the physical GPIO pin register. A similar patch has been merged recently by Hans for Crystal Cove PMIC GPIO driver. You can find more details about it in Commit 9a752b4c9ab9 ("gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs") Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reported-by: Jukka Laitinen <jukka.laitinen@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29gpiolib: fix filtering out unwanted eventsBartosz Golaszewski
GPIOEVENT_REQUEST_BOTH_EDGES is not a single flag, but a binary OR of GPIOEVENT_REQUEST_RISING_EDGE and GPIOEVENT_REQUEST_FALLING_EDGE. The expression 'le->eflags & GPIOEVENT_REQUEST_BOTH_EDGES' we'll get evaluated to true even if only one event type was requested. Fix it by checking both RISING & FALLING flags explicitly. Cc: stable@vger.kernel.org Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-21gpio: lp87565: Add support for GPIOKeerthy
Add driver for lp87565 PMIC family GPIOs. Three GPIOs are supported and can be configured in Open-drain output or Push-pull output. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-21gpio: dwapb: fix missing first irq for edgeboth irq typeXiaoguang Chen
dwapb_irq_set_type overwrites polarity register value for IRQ_TYPE_EDGE_BOTH case. If the polarity of one gpio is 0 by default, then it will set falling edge irq trigger. and the gpio may requires rising edge irq for the first time, and it will be missed. Do not overwrite polarity register for IRQ_TYPE_EDGE_BOTH case can solve this issue. Signed-off-by: Xiaoguang Chen <xgchenshy@gmail.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> [Fix some really weird text encoding problem] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mvebu: change compatible string for PWM supportRalph Sennhauser
As it turns out more than just Armada 370 and XP support using GPIO lines as PWM lines. For example the Armada 38x family has the same hardware support. As such "marvell,armada-370-xp-gpio" for the compatible string is a misnomer. Change the compatible string to "marvell,armada-370-gpio" before the driver makes it out of the -rc stage. This also follows the practice of using only the first device family supported as part of the name. Also update the documentation and comments in the code accordingly. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: exar: Fix reading of directions and valuesJan Kiszka
First, the logic for translating a register bit to the return code of exar_get_direction and exar_get_value were wrong. And second, there was a flip regarding the register bank in exar_get_direction. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: exar: Allocate resources on behalf of the platform deviceJan Kiszka
Do not allocate resources on behalf of the parent device but on our own. Otherwise, cleanup does not properly work if gpio-exar is removed but not the parent device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio-exar/8250-exar: Fix passing in of parent PCI deviceJan Kiszka
This fixes reloading of the GPIO driver for the same platform device instance as created by the exar UART driver: First of all, the driver sets drvdata to its own value during probing and does not restore the original value on exit. But this won't help anyway as the core clears drvdata after the driver left. Set the platform device parent instead. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: use devm_kcalloc() where applicableBartosz Golaszewski
When allocating a zeroed array of objects use devm_kcalloc() instead of manually calculating the required size and using devm_kzalloc(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: add myself as authorBartosz Golaszewski
Just taking credit for the recent changes and new features. :) Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: improve the error messageBartosz Golaszewski
Indicate the error number and make the message a bit more elaborate. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: don't return magic numbers from probe()Bartosz Golaszewski
When the requested number of GPIO lines is 0, return -EINVAL, not -1 which is -EPERM. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: improve readabilityBartosz Golaszewski
We currently shift bits here and there without actually explaining what we're doing. Add some helper variables with names indicating their purpose to improve the code readability. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: refuse to accept an odd number of GPIO rangesBartosz Golaszewski
Currently we ignore the last odd range value, since each chip is described by two values. Be more strict and require the user to pass an even number of ranges. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: tweak gpio_mockup_event_write()Bartosz Golaszewski
Invert the logic of the irq_enabled check and only access the private data after the input is sanitized. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20gpio: mockup: improve the debugfs input sanitizationBartosz Golaszewski
We're currently only checking the first character of the input to the debugfs event files, so a string like '0sdfdsf' is valid and indicates a falling edge event. Be more strict and only allow '0', '1', '0\n' & '1\n'. While we're at it: move the sanitization code before the irq_enabled check so that we indicate an error on invalid input even if nobody is waiting for events. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-19mfd: intel_soc_pmic_bxtwc: Remove second level IRQ for gpio deviceKuppuswamy Sathyanarayanan
Currently all PMIC GPIO domain IRQs are consumed by the same device(bxt_wcove_gpio), so there is no need to export them as separate interrupts. We can just export only the first level GPIO IRQ(BXTWC_GPIO_LVL1_IRQ) as an IRQ resource and let the GPIO device driver(bxt_wcove_gpio) handle the GPIO sub domain IRQs based on status value of GPIO level2 interrupt status register. Also, just using only the first level IRQ will eliminate the bug involved in requesting only the second level IRQ and not explicitly enable the first level IRQ. For more info on this issue please read the details at, https://lkml.org/lkml/2017/2/27/148 This patch also makes relevant change in Whiskey cove GPIO driver to use only first level PMIC GPIO IRQ. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-16gpio: mvebu: Add support for the Armada 7K/8K SoCsGregory CLEMENT
The Armada 7K and 8K SoCs use the same gpio controller as most of the other mvebu SoCs. However, the main difference is that the GPIO controller is part of a bigger system controller, and a syscon is used to control the overall system controller. Therefore, the driver needs to be adjusted to retrieve the regmap of the syscon to access registers, and account for the fact that registers are located at a certain offset within the regmap. This commit add the support of the syscon and introduce a new variant for this case. It was based on the preliminary work of Thomas Petazzoni. Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: mvebu: fix regmap_update_bits usageGregory CLEMENT
In some place in the driver regmap_update_bits was misused. Indeed the last argument is not the value of the bit (or group of bits) itself but the mask value inside the register. So when setting the bit N, then the value must be BIT(N) and not 1. CC: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: zynq: Clarify quirk and provide helper functionSoren Brinkmann
The one quirk used in the zynq GPIO driver was called FOO which is not very descriptive. Rename the quirk to IS_ZYNQ as it indicates whether the HW is a zynq or zynqmp device to allow handling of device-specific differences of the HW. Also provide a helper function to test whether the HW is zynq or zynqmp. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: merrifield: Remove unused headerAndy Shevchenko
I don't remember how linux/gpio.h made the source, now it seems unused. Remove it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: of: Spelling: s/retures/returns/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: use class_groups instead of class_attrsGreg Kroah-Hartman
The class_attrs pointer is long depreciated, and is about to be finally removed, so move to use the class_groups pointer instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: <linux-gpio@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09gpio: mvebu: fix gpio bank registration when pwm is usedRichard Genoud
If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix blink counter register selectionRichard Genoud
The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-31gpio: xra1403: select REGMAP_SPIArnd Bergmann
Without the regmap code, we get a link error: drivers/gpio/built-in.o: In function `xra1403_probe': (.text+0x132e0): undefined reference to `__devm_regmap_init_spi' Fixes: 5704520d7880 ("gpio: xra1403: Add EXAR XRA1403 SPI GPIO expander driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-31gpiolib: remove unused variableArnd Bergmann
This was left behind by a cleanup patch: drivers/gpio/gpiolib.c: In function 'gpiochip_irqchip_init_valid_mask': drivers/gpio/gpiolib.c:1474:6: error: unused variable 'i' [-Werror=unused-variable] Fixes: 923a654c186c ("gpiolib: Re-use bitmap_fill() instead of open coded loop") Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Colin King <colin.king@canonical.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio/pinctrl: ingenic: depend on OFLinus Walleij
Fix compile errors due to missing OF. Cc: Paul Cercueil <paul@crapouillou.net> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: adp5588: move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: ml-ioh: check the return value of irq_alloc_generic_chip()Bartosz Golaszewski
This function can fail, so check the return value before dereferencing the returned pointer. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: sta2x11: check the return value of irq_alloc_generic_chip()Bartosz Golaszewski
This function can fail, so check the return value before dereferencing the returned pointer. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: pch: check the return value of irq_alloc_generic_chip()Bartosz Golaszewski
This function can fail, so check the return value before dereferencing the returned pointer. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29gpio: mockup: support irqmask and irqunmaskBartosz Golaszewski
Even though this is a testing module, be nice and actually implement these functions. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>