summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/Kconfig
AgeCommit message (Collapse)Author
2021-11-05drm: fb_helper: improve CONFIG_FB dependencyArnd Bergmann
My previous patch correctly addressed the possible link failure, but as Jani points out, the dependency is now stricter than it needs to be. Change it again, to allow DRM_FBDEV_EMULATION to be used when DRM_KMS_HELPER and FB are both loadable modules and DRM is linked into the kernel. As a side-effect, the option is now only visible when at least one DRM driver makes use of DRM_KMS_HELPER. This is better, because the option has no effect otherwise. Fixes: 606b102876e3 ("drm: fb_helper: fix CONFIG_FB dependency") Suggested-by: Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211029120307.1407047-1-arnd@kernel.org
2021-10-13drm/locking: add backtrace for locking contended locks without backoffJani Nikula
If drm_modeset_lock() returns -EDEADLK, the caller is supposed to drop all currently held locks using drm_modeset_backoff(). Failing to do so will result in warnings and backtraces on the paths trying to lock a contended lock. Add support for optionally printing the backtrace on the path that hit the deadlock and didn't gracefully handle the situation. For example, the patch [1] inadvertently dropped the return value check and error return on replacing calc_watermark_data() with intel_compute_global_watermarks(). The backtraces on the subsequent locking paths hitting WARN_ON(ctx->contended) were unhelpful, but adding the backtrace to the deadlock path produced this helpful printout: <7> [98.002465] drm_modeset_lock attempting to lock a contended lock without backoff: drm_modeset_lock+0x107/0x130 drm_atomic_get_plane_state+0x76/0x150 skl_compute_wm+0x251d/0x2b20 [i915] intel_atomic_check+0x1942/0x29e0 [i915] drm_atomic_check_only+0x554/0x910 drm_atomic_nonblocking_commit+0xe/0x50 drm_mode_atomic_ioctl+0x8c2/0xab0 drm_ioctl_kernel+0xac/0x140 Add new CONFIG_DRM_DEBUG_MODESET_LOCK to enable modeset lock debugging with stack depot and trace. [1] https://lore.kernel.org/r/20210924114741.15940-4-jani.nikula@intel.com v2: - default y if DEBUG_WW_MUTEX_SLOWPATH (Daniel) - depends on DEBUG_KERNEL Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211001091444.8177-1-jani.nikula@intel.com
2021-10-01drm: fb_helper: fix CONFIG_FB dependencyArnd Bergmann
With CONFIG_FB=m and CONFIG_DRM=y, we get a link error in the fb helper: aarch64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_alloc_fbi': (.text+0x10cc): undefined reference to `framebuffer_alloc' Tighten the dependency so it is only allowed in the case that DRM can link against FB. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Link: https://lore.kernel.org/all/20210721152211.2706171-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210927142816.2069269-1-arnd@kernel.org
2021-09-14Merge drm/drm-next into drm-misc-nextMaxime Ripard
Kickstart new drm-misc-next cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-08-26drm: zte: remove obsolete DRM Support for ZTE SoCsLukas Bulwahn
Commit 89d4f98ae90d ("ARM: remove zte zx platform") removes the config ARCH_ZX. So, since then, the DRM Support for ZTE SoCs (config DRM_ZTE) depends on this removed config ARCH_ZX and cannot be selected. Fortunately, ./scripts/checkkconfigsymbols.py detects this and warns: ARCH_ZX Referencing files: drivers/gpu/drm/zte/Kconfig So, remove this obsolete DRM support. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-5-lukas.bulwahn@gmail.com
2021-08-18drm: amdgpu: remove obsolete reference to config CHASHLukas Bulwahn
Commit 04ed8459f334 ("drm/amdgpu: remove chash") removes the chash architecture and its corresponding config CHASH. There is still a reference to CHASH in the config DRM_AMDGPU in ./drivers/gpu/drm/Kconfig. Remove this obsolete reference to config CHASH. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-12drm/vgem: use shmem helpersDaniel Vetter
Aside from deleting lots of code the real motivation here is to switch the mmap over to VM_PFNMAP, to be more consistent with what real gpu drivers do. They're all VM_PFNMAP, which means get_user_pages doesn't work, and even if you try and there's a struct page behind that, touching it and mucking around with its refcount can upset drivers real bad. v2: Review from Thomas: - sort #include - drop more dead code that I didn't spot somehow v3: select DRM_GEM_SHMEM_HELPER to make it build (intel-gfx-ci) v4: I got tricked by 0cf2ef46c6c0 ("drm/shmem-helper: Use cached mappings by default"), and we need WC in vgem because vgem doesn't have explicit begin/end cpu access ioctls. Also add a comment why exactly vgem has to use wc. v5: Don't set obj->base.funcs, it will default to drm_gem_shmem_funcs (Thomas) v6: vgem also needs an MMU for remapping v7: I absolutely butchered the rebases over the vgem mmap change and revert and broke the patch. Actually go back to v6 from before the vgem mmap changes. Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-4-daniel.vetter@ffwll.ch
2021-08-12drm/shmem-helper: Switch to vmf_insert_pfnDaniel Vetter
We want to stop gup, which isn't the case if we use vmf_insert_page and VM_MIXEDMAP, because that does not set pte_special. The motivation here is to stop get_user_pages from working on buffer object mmaps in general. Quoting some discussion with Thomas: On Thu, Jul 22, 2021 at 08:22:43PM +0200, Thomas Zimmermann wrote: > Am 13.07.21 um 22:51 schrieb Daniel Vetter: > > We want to stop gup, which isn't the case if we use vmf_insert_page > > What is gup? get_user_pages. It pins memory wherever it is, which badly wreaks at least ttm and could also cause trouble with cma allocations. In both cases becaue we can't move/reuse these pages anymore. Now get_user_pages fails when the memory isn't considered "normal", like with VM_PFNMAP and using vm_insert_pfn. For consistency across all dma-buf I'm trying (together with Christian König) to roll this out everywhere, for fewer surprises. E.g. for 5.14 iirc we merged a patch to do the same for ttm, where it closes an actual bug (ttm gets really badly confused when there's suddenly pinned pages where it thought it can move them). cma allcoations already use VM_PFNMAP (because that's what dma_mmap is using underneath), as is anything that's using remap_pfn_range. Worst case we have to revert this patch for shmem helpers if it breaks something, but I hope that's not the case. On the ttm side we've also had some fallout that we needed to paper over with clever tricks. v2: With this shmem gem helpers now definitely need CONFIG_MMU (0day) v3: add more depends on MMU. For usb drivers this is a bit awkward, but really it's correct: To be able to provide a contig mapping of buffers to userspace on !MMU platforms we'd need to use the cma helpers for these drivers on those platforms. As-is this wont work. Also not exactly sure why vm_insert_page doesn't go boom, because that definitely wont fly in practice since the pages are non-contig to begin with. v4: Explain the entire motivation a lot more (Thomas) Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210812131412.2487363-2-daniel.vetter@ffwll.ch
2021-07-05drm/bochs: Move to tiny/Thomas Zimmermann
The bochs driver is only ~600 lines of code. Putting it into tiny/ cleans up the DRM directory slightly. Some style problems were fixed and unneeded include statements were removed. No functional changes. v2: * make bochs_mode_funcs static (Daniel, kernel test robot) * rebase onto aperture API changes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210702075434.27677-2-tzimmermann@suse.de
2021-06-11drm: Introduce the DP AUX busDouglas Anderson
Historically "simple" eDP panels have been handled by panel-simple which is a basic platform_device. In the device tree, the panel node was at the top level and not connected to anything else. Let's change it so that, instead, panels can be represented as being children of the "DP AUX bus". Essentially we're saying that the hierarchy that we're going to represent is the "control" connections between devices. The DP AUX bus is a control bus provided by an eDP controller (the parent) and consumed by a device like a panel (the child). The primary incentive here is to cleanly provide the panel driver the ability to communicate over the AUX bus while handling lifetime issues properly. The panel driver may want the AUX bus for controlling the backlight or querying the panel's EDID. The idea for this bus's design was hashed out over IRC [1]. [1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11 Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Rajeev Nandan <rajeevny@codeaurora.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.4.I787c9ba09ed5ce12500326ded73a4f7c9265b1b3@changeid
2021-06-07drm/hyperv: Add DRM driver for hyperv synthetic video deviceDeepak Rawat
DRM driver for hyperv synthetic video device, based on hyperv_fb framebuffer driver. Also added config option "DRM_HYPERV" to enabled this driver. v2: - Add support for gen2 VM - Fixed review comments v3: - Split into multiple files as suggested by Thomas Zimmermann - Fixed hibernation issue as suggested by Dexuan Cui - Use ioremap_cache as suggested by Dexuan Cui - Incorporated other review comments v4: - Fix bitrotted code - Review comments - Updated the copyright and license to match hyperv_fb v5: - Address review comments and rebased with drm-misc-next v6: - Minor code/comment improvement as suggested by Dexuan Cui Signed-off-by: Deepak Rawat <drawat.floss@gmail.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210527112230.1274-1-drawat.floss@gmail.com
2021-06-03drm: Avoid circular dependencies for CONFIG_FBKees Cook
When cleaning up other drm config dependencies, it is too easy to create larger problems. Instead, mark CONFIG_FB as a "depends": drivers/gpu/drm/Kconfig:74:error: recursive dependency detected! Suggested-by: Arnd Bergmann <arnd@kernel.org> Link: https://lore.kernel.org/lkml/CAK8P3a3jUQs6c5tESSNMbqfuymewj9FhqRizyHcfOXf8Rgy-nA@mail.gmail.com/ Signed-off-by: Kees Cook <keescook@chromium.org> [danvet: Rebase, the symbol has changed.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-2-keescook@chromium.org
2021-05-26drm/kconfig: Remove unused select of DRM_KMS_FB_HELPERThomas Zimmermann
The option DRM_KMS_FB_HELPER has been removed. Also remove the last remaining select statement for it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option") Acked-by: Maxime Ripard <maxime@cerno.tech> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20210526100825.29450-1-tzimmermann@suse.de
2021-04-26drm: Remove DRM_KMS_FB_HELPER Kconfig optionThomas Zimmermann
It's only used by DRM_FBDEV_EMULATION, so inline it there. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210415110040.23525-5-tzimmermann@suse.de
2021-03-16drm: Add GUD USB Display driverNoralf Trønnes
This adds a USB display driver with the intention that it can be used with future USB interfaced low end displays/adapters. The Linux gadget device driver will serve as the canonical device implementation. The following DRM properties are supported: - Plane rotation - Connector TV properties There is also support for backlight brightness exposed as a backlight device. Display modes can be made available to the host driver either as DRM display modes or through EDID. If both are present, EDID is just passed on to userspace. Performance is preferred over color depth, so if the device supports RGB565, DRM_CAP_DUMB_PREFERRED_DEPTH will return 16. If the device transfer buffer can't fit an uncompressed framebuffer update, the update is split up into parts that do fit. Optimal user experience is achieved by providing damage reports either by setting FB_DAMAGE_CLIPS on pageflips or calling DRM_IOCTL_MODE_DIRTYFB. LZ4 compression is used if the device supports it. The driver supports a one bit monochrome transfer format: R1. This is not implemented in the gadget driver. It is added in preparation for future monochrome e-ink displays. The driver is MIT licensed to smooth the path for any BSD port of the driver. v2: - Use devm_drm_dev_alloc() and drmm_mode_config_init() - drm_fbdev_generic_setup: Use preferred_bpp=0, 16 was a copy paste error - The drm_backlight_helper is dropped, copy in the code - Support protocol version backwards compatibility for device v3: - Use donated Openmoko USB pid - Use direct compression from framebuffer when pitch matches, not only on full frames, so split updates can benefit - Use __le16 in struct gud_drm_req_get_connector_status - Set edid property when the device only provides edid - Clear compression fields in struct gud_drm_req_set_buffer - Fix protocol version negotiation - Remove mode->vrefresh, it's calculated v4: - Drop the status req polling which was a workaround for something that turned out to be a dwc2 udc driver problem - Add a flag for the Linux gadget to require a status request on SET operations. Other devices will only get status req on STALL errors - Use protocol specific error codes (Peter) - Add a flag for devices that want to receive the entire framebuffer on each flush (Lubomir) - Retry a failed framebuffer flush - If mode has changed wait for worker and clear pending damage before queuing up new damage, fb width/height might have changed - Increase error counter on bulk transfer failures - Use DRM_MODE_CONNECTOR_USB - Handle R1 kmalloc error (Peter) - Don't try and replicate the USB get descriptor request standard for the display descriptor (Peter) - Make max_buffer_size optional (Peter), drop the pow2 requirement since it's not necessary anymore. - Don't pre-alloc a control request buffer, it was only 4k - Let gud.h describe the whole protocol explicitly and don't let DRM leak into it (Peter) - Drop display mode .hskew and .vscan from the protocol - Shorten names: s/GUD_DRM_/GUD_/ s/gud_drm_/gud_/ (Peter) - Fix gud_pipe_check() connector picking when switching connector - Drop gud_drm_driver_gem_create_object() cached is default now - Retrieve USB device from struct drm_device.dev instead of keeping a pointer - Honour fb->offsets[0] - Fix mode fetching when connector status is forced - Check EDID length reported by the device - Use drm_do_get_edid() so userspace can overrride EDID - Set epoch counter to signal connector status change - gud_drm_driver can be const now v5: - GUD_DRM_FORMAT_R1: Use non-human ascii values (Daniel) - Change name to: GUD USB Display (Thomas, Simon) - Change one __u32 -> __le32 in protocol header - Always log fb flush errors, unless the previous one failed - Run backlight update in a worker to avoid upsetting lockdep (Daniel) - Drop backlight_ops.get_brightness, there's no readback from the device so it doesn't really add anything. - Set dma mask, needed by dma-buf importers v6: - Use obj-y in Makefile (Peter) - Fix missing le32_to_cpu() when using GUD_DISPLAY_MAGIC (Peter) - Set initial brightness on backlight device v7: - LZ4_compress_default() can return zero, check for that - Fix memory leak in gud_pipe_check() error path (Peter) - Improve debug and error messages (Peter) - Don't pass length in protocol structs (Peter) - Pass USB interface to gud_usb_control_msg() et al. (Peter) - Improve gud_connector_fill_properties() (Peter) - Add GUD_PIXEL_FORMAT_RGB111 (Peter) - Remove GUD_REQ_SET_VERSION (Peter) - Fix DRM_IOCTL_MODE_OBJ_SETPROPERTY and the rotation property - Fix dma-buf import (Thomas) v8: - Forgot to filter RGB111 from reaching userspace - Handle a device that only returns unknown device properties (Peter) - s/GUD_PIXEL_FORMAT_RGB111/GUD_PIXEL_FORMAT_XRGB1111/ (Peter) - Fix R1 and XRGB1111 format conversion - Add FIXME about Big Endian being broken (Peter, Ilia) Cc: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: Peter Stuge <peter@stuge.se> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210313112545.37527-4-noralf@tronnes.org
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-03-12Merge tag 'amd-drm-fixes-5.12-2021-03-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.12-2021-03-10: amdgpu: - Fix aux backlight control - Add a backlight override parameter - Various display fixes - PCIe DPM fix for vega - Polaris watermark fixes - Additional S0ix fix radeon: - Fix GEM regression - Fix AGP dependency handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210310221141.3974-1-alexander.deucher@amd.com
2021-03-10drm/radeon: fix AGP dependencyChristian König
When AGP is compiled as module radeon must be compiled as module as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-25drm/arc: Move to drm/tinyDaniel Vetter
Because it is. v2: Delete now unused crtc funcs (0day) Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-15-daniel.vetter@ffwll.ch
2021-02-22Merge tag 'topic/kcmp-kconfig-2021-02-22' of ↵Linus Torvalds
git://anongit.freedesktop.org/drm/drm Pull kcmp kconfig update from Daniel Vetter: "Make the kcmp syscall available independently of checkpoint/restore. drm userspaces uses this, systemd uses this, so makes sense to pull it out from the checkpoint-restore bundle. Kees reviewed this from security pov and is happy with the final version" Link: https://lwn.net/Articles/845448/ * tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm: kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE
2021-02-16kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTOREChris Wilson
Userspace has discovered the functionality offered by SYS_kcmp and has started to depend upon it. In particular, Mesa uses SYS_kcmp for os_same_file_description() in order to identify when two fd (e.g. device or dmabuf) point to the same struct file. Since they depend on it for core functionality, lift SYS_kcmp out of the non-default CONFIG_CHECKPOINT_RESTORE into the selectable syscall category. Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to deduplicate the per-service file descriptor store. Note that some distributions such as Ubuntu are already enabling CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
2021-01-13drm: Merge CONFIG_DRM_VM into CONFIG_DRM_LEGACYThomas Zimmermann
CONFIG_DRM_VM gets selected by CONFIG_DRM_LEGACY, but nothing else. So remove it and build drm_vm.o as part of CONFIG_DRM_LEGACY. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210112081035.6882-5-tzimmermann@suse.de
2020-11-09drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backendsThomas Zimmermann
This patch replaces the vmap/vunmap's use of raw pointers in GEM object functions with instances of struct dma_buf_map. GEM backends are converted as well. For most of them, this simply changes the returned type. TTM-based drivers now return information about the location of the memory, either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap() et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of implementing their own vmap callbacks. v7: * init QXL cursor to mapped BO buffer (kernel test robot) v5: * update vkms after switch to shmem v4: * use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian) * fix a trailing { in drm_gem_vmap() * remove several empty functions instead of converting them (Daniel) * comment uses of raw pointers with a TODO (Daniel) * TODO list: convert more helpers to use struct dma_buf_map Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
2020-11-05drm/kmb: Build files for KeemBay Display driverAnitha Chrisanthus
v2: Added Maintainer entry v3: Added one more Maintainer entry v3: drop videomode_helpers Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1604538931-26726-8-git-send-email-anitha.chrisanthus@intel.com
2020-10-29drm/ttm: nuke old page allocatorChristian König
Not used any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com> Tested-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/397087/?series=83051&rev=1
2020-10-15drm/vkms: Switch to shmem helpersDaniel Vetter
Inspired by a patch by Chris Wilson for vgem. Plus this gives us vmap at the gem bo level, which we need for generic fbdev emulation. Luckily shmem also tracks ->vaddr, so we just need to adjust the code all over a bit to make this fit. Also wire up handle_to_fd, dunno why that was missing. v2: - Drop now unused container_of #define (Melissa) - Make sure we keep creating cached objects, this is for testing (Thomas) Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201013111027.375999-1-daniel.vetter@ffwll.ch
2020-07-18drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort SubsystemHyun Kwon
The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort Subsystem. It includes a buffer manager, a video pipeline renderer (blender), an audio mixer and a DisplayPort source controller (transmitter). The DMA engine the provide data to the buffer manager, as well as the DisplayPort PHYs that drive the lanes, are external to the subsystem and interfaced using the DMA engine and PHY APIs respectively. This driver supports the DisplayPort Subsystem and implements - Two planes, for graphics and video - One CRTC that supports alpha blending - One encoder for the DisplayPort transmitter - One connector for an external monitor It currently doesn't support - Color keying - Test pattern generation - Audio - Live input from the Programmable Logic (FPGA) - Output to the Programmable Logic (FPGA) Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-04-28drm/cirrus: Move to drm/tinyDaniel Vetter
Because it is. Huge congrats to everyone who made this kind of refactoring happen! Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-38-daniel.vetter@ffwll.ch
2020-04-20docs: fix broken references to text filesMauro Carvalho Chehab
Several references got broken due to txt to ReST conversion. Several of them can be automatically fixed with: scripts/documentation-file-ref-check --fix Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-06drm: unbreak the DRM menu, broken by DRM_EXPORT_FOR_TESTSRandy Dunlap
Unbreak the DRM menu. This Kconfig symbol does not depend on DRM, so the menu is broken at that point. Move the symbol to a location in the Kconfig file so that it does not break the dependency continuity. Fixes: 6349120ddcbf ("drm: Move EXPORT_SYMBOL_FOR_TESTS_ONLY under a separate Kconfig") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/04221997-79ba-f8a2-4f2d-3c3d9f5219bc@infradead.org
2020-01-27drm/tidss: New driver for TI Keystone platform Display SubSystemJyri Sarha
This patch adds a new DRM driver for Texas Instruments DSS IPs used on Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is a major change to the older DSS IP versions, which are supported by the omapdrm driver. While on higher level the Keystone DSS resembles the older DSS versions, the registers are completely different and the internal pipelines differ a lot. DSS IP found on K2G is an "ultra-light" version, and has only a single plane and a single output. The K3 DSS IPs are found on AM65x and J721E SoCs. AM65x DSS has two video ports, one full video plane, and another "lite" plane without scaling support. J721E has 4 video ports, 2 video planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS) output. Version history: v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include <drm/drmP.h> - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting it v3: no change v4: no change v5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows. v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modeset v7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10 v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
2020-01-09drm/Kconfig: add missing 'depends on DRM' for DRM_DP_CECHans Verkuil
Add a missing 'depends on DRM' for the DRM_DP_CEC config option. Without that enabling DRM_DP_CEC will force CEC_CORE to =y instead of =m if DRM=m as well. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/489bdaae-9b05-2d70-12e1-4fda7899dfc1@xs4all.nl
2019-12-27Merge tag 'drm-intel-next-2019-12-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next i915 features for v5.6: - Separate hardware and uapi state (Maarten) - Expose a number of sprite and plane formats (Ville) - DDC symlink in HDMI connector sysfs directory (Andrzej Pietrasiewicz) - Improve obj->mm.lock nesting lock annotation (Daniel) (Includes lockdep changes) - Selftest improvements across the board (Chris) - ICL/TGL VDSC support on DSI (Jani, Vandita) - TGL DSB fixes (Animesh, Lucas, Tvrtko) - VBT parsing improvements and fixes (Lucas, Matt, José, Jani, Dan Carpenter) - Fix LPSS vs. PMIC PWM backlight use on BYT/CHT (Hans) (Includes ACPI+MFD changes) - Display state, crtc, plane code refactoring (Ville) - Set opregion chpd value to indicate the driver handles hotplug (Hans de Goede) - DSI updates and fixes, TGL pipe D support, port mapping (José, Jani, Vandita) - Make HDCP 2.2 support cover CFL (Juston Li) - Fix CML PCI IDs and ULT (Shawn Lee) - CMP-V PCH fix (Imre) - TGL: Add another TGL PCH ID (James) - EHL/JSL: Add new PCI IDs (James) - Rename pipe update tracepoints (Ville) - Fix FBC on GLK+ (Ville) - GuC fixes and improvements (Daniele, Don Hiatt, Stuart Summers, Matthew Brost) - Display debugfs improvements (Ville) - Hotplug/irq fixes (Matt) - PSR fixes and improvements (José) - DRM_I915_GEM_MMAP_OFFSET ioctl (Abdiel) - Static analysis fixes (Colin Ian King) - Register sysctl path globally (Venkata Sandeep Dhanalakota) - Introduce new macros for tracing (Venkata Sandeep Dhanalakota) - Migrate gt towards intel_uncore_read/write (Andi) - Add rps frequency translation helpers (Andi) - Fix TGL transcoder clock off sequence (José) - Fix TGL port A audio (Kai Vehmanen) - TGL render decompression (DK) - GEM/GT improvements and fixes across the board (Chris) - Couple of backmerges (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 24 Dec 2019 03:20:48 AM AEST # gpg: using RSA key D398079D26ABEE6F # gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1565 A65B 77B0 632E 1124 E59C D398 079D 26AB EE6F # Conflicts: # drivers/gpu/drm/i915/display/intel_fbc.c # drivers/gpu/drm/i915/gt/intel_lrc.c # drivers/gpu/drm/i915/i915_gem.c From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lfr3rkry.fsf@intel.com
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-11Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Sync up with v5.5-rc1 to get the updated lock_release() API among other things. Fix the conflict reported by Stephen Rothwell [1]. [1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-12-05Merge tag 'drm-misc-next-fixes-2019-12-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next mgag200- Fix hw with broken 'startadd' support (Thomas) mst- Avoid skipping payloads in payload deletion loop (Wayne) omap- Fix dma_addr refcounting (Tomi) Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191204212255.GA256395@art_vandelay
2019-12-03drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=nGuenter Roeck
On systems with STACKTRACE_SUPPORT=n, we get: WARNING: unmet direct dependencies detected for STACKTRACE Depends on [n]: STACKTRACE_SUPPORT Selected by [y]: - STACKDEPOT [=y] and build errors such as: m68k-linux-ld: kernel/stacktrace.o: in function `stack_trace_save': (.text+0x11c): undefined reference to `save_stack_trace' Add the missing deendency on STACKTRACE_SUPPORT. Fixes: 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging") Cc: Lyude Paul <lyude@redhat.com> Cc: Sean Paul <sean@poorly.run> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202133650.11964-1-linux@roeck-us.net
2019-11-20drm/r128: make ATI PCI GART part of its only user, r128Jani Nikula
The ATI Rage 128 driver has been the only user of ATI PCI GART code since Radeon dropped UMS support in commit 8333f607a631 ("drm/radeon: remove UMS support"). Clean up the drm top level directory, Kconfig and Makefile by making ati_pcigart.[ch] part of r128. Drop the CONFIG_DRM_ATI_PCIGART config option made redundant by the change. This reduces drm.ko module size slightly when legacy drivers are enabled, and moves the baggage to r128.ko instead. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191119100536.12024-1-jani.nikula@intel.com
2019-11-15Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Backmerge to get dfce90259d74 ("Backmerge i915 security patches from commit 'ea0b163b13ff' into drm-next") and thus 100d46bd72ec ("Merge Intel Gen8/Gen9 graphics fixes from Jon Bloomfield."). Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-11-14drm/ttm, drm/vmwgfx: Use a configuration option for the TTM dma page poolThomas Hellstrom
Drivers like vmwgfx may want to test whether the dma page pool is present or not. Since it's activated by default by TTM if compiled-in, define a hidden configuration option that the driver can test for. Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2019-11-07drm: Move EXPORT_SYMBOL_FOR_TESTS_ONLY under a separate KconfigChris Wilson
Currently, we only export symbols for drm-selftests which are either compiled as modules or into the main drm builtin. However, if we want to export symbols from drm.ko for the drivers' selftests, we require a means of controlling that export separately. So we add a new Kconfig to determine whether or not the EXPORT_SYMBOL_FOR_TESTS_ONLY() takes effect. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191107180601.30815-1-chris@chris-wilson.co.uk
2019-10-30Merge tag 'topic/mst-suspend-resume-reprobe-2019-10-29-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next UAPI Changes: Cross-subsystem Changes: Core Changes: * Handle UP requests asynchronously in the DP MST helpers, fixing hotplug notifications and allowing us to implement suspend/resume reprobing * Add basic suspend/resume reprobing to the DP MST helpers * Improve locking for link address reprobing and connection status request handling in the DP MST helpers * Miscellaneous refactoring in the DP MST helpers * Add a Kconfig option to the DP MST helpers to enable tracking of gets/puts for topology references for debugging purposes Driver Changes: * nouveau: Resume hotplug interrupts earlier, so that sideband messages may be transmitted during resume and thus allow suspend/resume reprobing for DP MST to work * nouveau: Avoid grabbing runtime PM references when handling short DP pulses, so that handling sideband messages in resume codepaths with the DP MST helpers doesn't deadlock us * i915, nouveau, amdgpu, radeon: Use detect_ctx for probing MST connectors, so that we can grab the topology manager's atomic lock Note: there's some amdgpu patches that I didn't realize were pushed upstream already when creating this topic branch. When they fail to apply, you can just ignore and skip them. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/a74c6446bc960190d195a751cb6d8a00a98f3974.camel@redhat.com
2019-10-30Merge tag 'drm-misc-next-2019-10-24-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.5: UAPI Changes: -syncobj: allow querying the last submitted timeline value (David) -fourcc: explicitly defineDRM_FORMAT_BIG_ENDIAN as unsigned (Adam) -omap: revert the OMAP_BO_* flags that were added -- no userspace (Sean) Cross-subsystem Changes: -MAINTAINERS: add Mihail as komeda co-maintainer (Mihail) Core Changes: -edid: a few cleanups, add AVI infoframe bar info (Ville) -todo: remove i915 device_link item and add difficulty levels (Daniel) -dp_helpers: add a few new helpers to parse dpcd (Thierry) Driver Changes: -gma500: fix a few memory disclosure leaks (Kangjie) -qxl: convert to use the new drm_gem_object_funcs.mmap (Gerd) -various: open code dp_link helpers in preparation for helper removal (Thierry) Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Adam Jackson <ajax@redhat.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Kangjie Lu <kjlu@umn.edu> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191024155535.GA10294@art_vandelay
2019-10-26Merge tag 'drm-next-5.5-2019-10-09' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.5-2019-10-09: amdgpu: - Additional RAS enablement for vega20 - RAS page retirement and bad page storage in EEPROM - No GPU reset with unrecoverable RAS errors - Reserve vram for page tables rather than trying to evict - Fix issues with GPU reset and xgmi hives - DC i2c over aux fixes - Direct submission for clears, PTE/PDE updates - Improvements to help support recoverable GPU page faults - Silence harmless SAD block messages - Clean up code for creating a bo at a fixed location - Initial DC HDCP support - Lots of documentation fixes - GPU reset for renoir - Add IH clockgating support for soc15 asics - Powerplay improvements - DC MST cleanups - Add support for MSI-X - Misc cleanups and bug fixes amdkfd: - Query KFD device info by asic type rather than pci ids - Add navi14 support - Add renoir support - Add navi12 support - gfx10 trap handler improvements - pasid cleanups - Check against device cgroup ttm: - Return -EBUSY with pipelining with no_gpu_wait radeon: - Silence harmless SAD block messages device_cgroup: - Export devcgroup_check_permission Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010041713.3412-1-alexander.deucher@amd.com
2019-10-24drm/dp_mst: Add topology ref history tracking for debuggingLyude Paul
For very subtle mistakes with topology refs, it can be rather difficult to trace them down with the debugging info that we already have. I had one such issue recently while trying to implement suspend/resume reprobing for MST, and ended up coming up with this. Inspired by Chris Wilson's wakeref tracking for i915, this adds a very similar feature to the DP MST helpers, which allows for partial tracking of topology refs for both ports and branch devices. This is a lot less advanced then wakeref tracking: we merely keep a count of all of the spots where a topology ref has been grabbed or dropped, then dump out that history in chronological order when a port or branch device's topology refcount reaches 0. So far, I've found this incredibly useful for debugging topology refcount errors. Since this has the potential to be somewhat slow and loud, we add an expert kernel config option to enable or disable this feature, CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS. Changes since v1: * Don't forget to destroy topology_ref_history_lock Changes since v4: * Correct order of kref_put()/topology_ref_history_unlock - we can't unlock the history after kref_put() since the memory might have been freed by that point * Don't print message on allocation error failures, the kernel already does this for us Changes since v5: * Get rid of some leftover usages of %px * Remove a leftover empty return; statement Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-15-lyude@redhat.com
2019-10-16drm/i810: Refer to `PREEMPTION' in commentSebastian Andrzej Siewior
The dependency has been changed from `PREEMPT' to `PREEMPTION'. Reflect this change in the comment. Use `PREEMPTION' in the comment. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191015191821.11479-29-bigeasy@linutronix.de
2019-10-09drm/vkms: Fix an undefined reference error in vkms_composer_workerzhong jiang
I hit the following error when compile the kernel. drivers/gpu/drm/vkms/vkms_composer.o: In function `vkms_composer_worker': vkms_composer.c:(.text+0x5e4): undefined reference to `crc32_le' make: *** [vmlinux] Error 1 Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1569201883-18779-1-git-send-email-zhongjiang@huawei.com
2019-10-07drm/amd: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03Merge drm/drm-next into drm-misc-nextMaxime Ripard
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-23 13:11:54 +0000