| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
Outside of a modeset/link configuration change, we should not have to
wait for the panel to exit PSR. Depending on the panel and it's state,
it may take multiple frames for it to exit PSR. Therefore, waiting in
all scenarios may cause perceived stuttering, especially in combination
with faster vblank shutdown.
[How]
PSR1 disable is hooked up to the vblank enable event, and vice versa. In
case of vblank enable, do not wait for panel to exit PSR, but still wait
in all other cases.
We also avoid a call to unnecessarily change power_opts on disable -
this ends up sending another command to dmcub fw.
When testing against IGT, some crc tests like kms_plane_alpha_blend and
amd_hotplug were failing due to CRC timeouts. This was found to be
caused by the early return before HW has fully exited PSR1. Fix this by
first making sure we grab a vblank reference, then waiting for panel to
exit PSR1, before programming hw for CRC generation.
Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For the legacy secure display, it involves PSP + DMUB to confgiure and
retrieve the CRC/ROI result. Have requirement to support mode which all
handled by driver only.
[How]
Add another "DisplayCRC" mode, which doesn't involve PSP + DMUB.
All things are handled by the driver only
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Have the need to specify the CRC window on specific CRC engine.
dc_stream_configure_crc() today calculates CRC on crc engine 0 only and always
resets CRC engine at first.
[How]
Add index parameter to dc_stream_configure_crc() for selecting the desired crc
engine. Additionally, add another parameter to specify whether to skip the
default reset of crc engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
We already extend our dm, dc and dmub to support setting of multiple CRC
instances, now extend the capability to return back the ROI/CRC pair result
from psp by specifying activated ROI instances.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
crc windows
[Why & How]
We actually have the capability to calculate independent CRC for 2 crc window
at the same time. Extend dm with the capability by having array to
configure/maintain multiple crc windows. Add the flexibility but use 1st CRC
instance only for now. Can change to use the 2nd CRC instance if needed.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Since now we can set multiple crc windows for secure display, add a new input
parameter for dc_stream_get_crc to indicate to fetch crc from which crc
engine.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use existing swap() function rather than duplicating its implementation.
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c:185:47-48: WARNING opportunity for swap().
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c:125:53-54: WARNING opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=12335
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Variables relates to secure display are spreading out within struct
amdgpu_display_manager.
[How]
Encapsulate relevant variables into struct secure_display_context and
adjust relevant affected codes.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Under mst scenario, mst streams are from the same link_enc_hw_inst.
As the result, can't utilize that as the phy index for distinguising
different stream sinks.
[How]
Sort the connectors by:
link_enc_hw_instance->mst tree depth->mst RAD
After sorting the phy index assignment, store connector's relevant info
into dm mapping array. Once need the index, just look up the static
array.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
phy_id
[Why]
For mst streams under same topology, stream->link->link_enc_hw_inst are the same and
hence can't distinguish the crc window setting.
[How]
Firstly adjust dc_stream_forward_crc_window to accept assignment of phy_id. Follow up
another patch to determine the phy_id at dm layer.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Writeback connectors are based on a different object:
drm_writeback_connector, and are therefore different from
amdgpu_dm_connector. We need to be careful to ensure code
designed for amdgpu_dm_connector doesn't inadvertently try
to operate on a drm_writeback_connector.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adhere to Linux kernel coding style.
Reported by checkpatch:
WARNING: braces {} are not necessary for single statement blocks
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently we don't check if secure display is enabled before we send
command to disable secure display in dmub. It will accidentally cause
some other igt tests to fail, eg, crtc-linear-degamma.
[How]
Refactor the code we reset the secure display state to check secure
display was enabled or not before stopping it in dmub.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
The term (i.e. port & mst_port) that we used to use in amdgpu is a bit
confusing. Rename them to mst_output_port & mst_root respectively.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is possible that adev->dm.dc->caps.max_links is greater than
AMDGPU_MAX_CRTCS. So, to not potentially access unallocated memory use
adev->mode_info.num_crtc to do the bounds check instead of
adev->dm.dc->caps.max_links.
Fixes: 1b11ff764aef ("drm/amd/display: Implement multiple secure display")
Fixes: b8ff7e08bab9 ("drm/amd/display: Fix when disabling secure_display")
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Rename securedisplay_cmd to ta_securedisplay_cmd.
2. Rename ta_securedisplay_max_phy to ta_securedisplay_phy_ID.
3. update securedisplay_cmd to ta_securedisplay_cmd
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
- Need error message when failing to allocating secure_display_ctx.
- Need to check if secure display context in psp is initialized or not
before using it.
[How]
- Add error message when memory allocation fail.
- Add check before accessing psp secure display context.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Fix problems when we disable secure_display.
[How]
- Reset secure display context after disabled
- A secure_display_context is dedicate to a crtc, so we set the crtc for
it when we create the context.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Current secure display only work with single display, now make it
work with multiple displays.
[How]
Create secure_display_context for each crtc instance to store its
own Region of Interest (ROI) information.
v2: squash in warning fix (Alex)
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
securedisplay command buffer
[Why]
Before we call psp_securedisplay_invoke(), we call
psp_prep_securedisplay_cmd_buf() to prepare and initialize the command
buffer.
However, we didn't use the mutex_lock to protect the status of command
buffer. So when multiple threads are using the command buffer, after
thread A return from psp_securedisplay_invoke() and the command buffer
status is set to SUCCESS, another thread B may call
psp_prep_securedisplay_cmd_buf() and initialize the status to FAILURE
again, and cause Thread A to get a failure return status.
[How]
Move the mutex_lock out of psp_securedisplay_invoke() to its caller to
cover psp_prep_securedisplay_cmd_buf() and the code checking the return
status of command buffer.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
reuse struct rect rather than adding a new struct.
[How]
- Userspace keeps inputting x_start, y_start, x_end, y_end
- We translate data to x, y, width, height in code flow to store
- translate back to x_start, y_start, x_end, y_end before programming HW
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Porting secure display feature from DCN10 to DCN21. Support single
display for now and will extend to multiple displays.
[How]
- use workqueue to offload works for dmub or dmcu firmware
- after receiving ROI update from userspace, set skip_frame_cnt to 1
- refactor amdgpu_dm_crtc_handle_crc_window_irq()
- disable PSR before activating secure_display on a crtc
- check if secure_display is activated before enabling psr
- only work for single display for now.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.
[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.
116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
amdgpu_dm_crtc_set_crc_source() will call
amdgpu_dm_crtc_configure_crc_source() to enable/disable CRC
generation. However, configuration will be deferred to stream enabled.
If stream is not enabled, current flow will still try to get/put vblank
refcount.
[How]
Return EINVAL to skip actions on vblank refcount when stream is not
enabled.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Once set ROI and do suspend/resume, current flow will not enable
OTG_CRC_CTL again due to we'll defer crc configuration when stream
is enabled.
[How]
Remove current suspend/resume function and have logic implemented into
amdgpu_dm_atomic_commit_tail()
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In MST setup, we'd use MST downstream AUX to
dump the DPRX CRCs from sink device.
[how]
Assign the mst_port->aux to read DPCD registers.
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Find out few locks problems while doing secure display. They are
following few parts:
1. crc_rd_work_lock in amdgpu_dm_crtc_handle_crc_window_irq() should
also use spin_lock_irqsave instead of spin_lock_irq.
2. In crc_win_update_set(), crc_rd_work_lock should be grabbed after
obtaining lock event_lock. Otherwise, will cause deadlock by conflicting
the lock order in amdgpu_dm_crtc_handle_crc_window_irq()
3. flush_work() in crc_win_update_set() is no need and will cause
deadlock since amdgpu_dm_crtc_notify_ta_to_read() also tries to grab
lock crc_rd_work_lock.
[How]
Fix above problems.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Solomon Chiu <Solomon.Chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
To read back crc by sending command READ_ROI_CRC to
PSP TA to ask it to read out crc of crc window.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
To have crc window being unchanged, we have dmcu to keep monitoring crc
window registers. In order not to have driver and dmcu change crc
registers at the same time, have work of changing crc window to be done
by dmcu fw.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
To support feature that calculates CRTC CRC value on specific
region (crc window).
[How]
1. Use debugfs to specify crtc crc window
2. Use vline0 IRQ to write crtc crc window
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Find out that referring to crtc_state->crc_src is not thread safe.
Move crc_src from dm_crtc_state to dm_irq_params to fix this.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Find out when we try to disable CRC calculation, crc generation is still
enabled. Main reason is that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.
[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit c920888c604d72799d057bbcd9e28a6c003ccfbe.
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Bindu R <Bindu.R@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Find out when we try to disable CRC calculation,
crc generation is still enabled. Main reason is
that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.
[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Also, clean up crc window when disable crc calculation.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Instead of calculating CRC on whole frame, add flexibility to calculate
CRC on specific frame region.
[How]
Add few crc window coordinate properties. By default, CRC is calculated
on whole frame unless user space specifies the CRC calculation window.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Currently, we only support calculating CRC on whole frame.
We want to extend the capability to calculate CRC on
specific frame area.
[how]
Calculate CRC on specific area once it's specified from the
input parameter.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Get the amdgpu_device from the DRM device by use
of an inline function, drm_to_adev(). The inline
function resolves a pointer to struct drm_device
to a pointer to struct amdgpu_device.
v2: Use a typed visible static inline function
instead of an invisible macro.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
To compare the crc of the framebuffer data at input of
display pipeline with the crc of the otg, we need to
disable pixel formatter's dynamic expansion feature during
crc capture and keep it enable in the normal operation.
[HOW]
Expose a new interface in DM and dc for pixel formatter
(fmt dynamic bitdepth expansion control). Interface control
the FMT_DYNAMIC_EXP_EN bit, during crc capture keep
it disabled.
Signed-off-by: Robin Singh <robin.singh@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We need to ensure that we're holding the lock on the CRTC when setting
the CRC source since we're modifying the CRTC state directly.
We also need to wait for any outstanding non-blocking commits to finish
so they aren't reading state that's potentially being modified -
non-blocking commits don't hold the CRTC lock while doing commit tail
work.
[How]
Lock the CRTC using its mutex. While holding the lock check if there's
any commit active on the CRTC - if there is, it's non-blocking and
we should wait until it's finished by waiting for hw_done to be
signaled since that's the last point where we touch CRTC state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Calling amdgpu_dm_crtc_set_crc_source in amdgpu_dm directly has the
consequence of adding additional vblank references or starting DPRX
CRC capture more than once without calling stop first.
Vblank references for CRC capture should be managed entirely by opening
and closing the CRC file from userspace.
Stream state also shouldn't be required on the CRC so we can close the
file after the CRTC has been disabled.
[How]
Do DC programming required for configuring CRC capture separately from
setting the source. Whenever we re-enable or reset a CRC this
programming should be reapplied.
CRC vblank reference handling in amdgpu_dm can be entirely dropped after
this.
Stream state also no longer needs to be required since we can just defer
the programming to when the stream is actually enabled.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This change is a refactor in preparation for adding locking and removing
the requirement for a stream state on the CRTC for enabling CRC capture
to fix igt@kms_plane_multiple@* warnings.
[How]
We can get the aux by finding the matching connector for the CRTC
with the assumption that we're not doing cloning.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The call to drm_crtc_vblank_get can fail if vblank is disabled and
we try to increment the reference.
Since drm_crtc_vblank_get internally drops the reference when it fails
it means the subsequent drm_crtc_vblank_put(...) when closing the file
drops a zero reference.
This was found via igt@kms_plane@pixel-format-pipe-A-planes.
[How]
Check the return code and return it on failure.
We wouldn't have been able to enable CRC reading anyway since vblank
wasn't enabled.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
need to verify the impact of spatial dithering on 8bpc bypass mode.
[How]
added CRC sources and configure dihter option from dc stream.
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Hanghong Ma <Hanghong.Ma@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We need to check the pipe crc source through debugfs for bypass mode test.
[How]
add implementation of amdgpu_dm_crtc_get_crc_sources and hook into drm_crtc
callback get_crc_sources.
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We need to compare DPRX CRCs with framebuffer CRCs for digital bypass mode.
[How]
Hook into DRM to grab DP receiver CRCs through drm_dp_start_crc.
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Delete the unused drmP.h from amdgpu.h.
Fix fallout in various files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-5-sam@ravnborg.org
|
|
[Why]
During any modeset the CRTC stream is removed and a new stream is added.
This new stream doesn't carry over CRC capture state if it was
previously set.
[How]
Re-program the stream for CRC capture. The existing DRM callback can
be re-used here for the most part - the only modification needed is
additional locking now that it's called from within commit tail.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.
When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.
This issue was found running:
igt@kms_plane_multiple@atomic-pipe-b-tiling-none
The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.
[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The igt@kms_plane@pixel-format-pipe tests can create a sequence where
stream_state is NULL during amdgpu_dm_crtc_set_crc_source which results
in a null pointer dereference.
[How]
Guard against stream_state being NULL before accessing its fields. This
doesn't fix the root cause of the issue so a DRM_ERROR is generated
to still fail the tests.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now that 4.19-rc1 is cut, backmerge it into -misc-next.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
