Age | Commit message (Collapse) | Author |
|
This makes the check for HDMI and dual-link DVI a bit more
straightforward.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We've seen a bunch of issues where we can't get the connector from vbios
for what we think should be a valid connector id. Print some more info
when this happens.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It may take over 200ms for wait hpd ready. To optimize the resume time,
we can power on eDP in init_hw, wait for hpd ready when doing link
training.
also create separate eDP enable function to make sure eDP is powered up
before doing and DPCD access, as HPD low will result in DPDC transaction
failure.
After optimization,
setpowerstate 145ms -> 9.8ms,
DPMS 387ms -> 18.9ms
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Andrew Jiang <Andrew.Jiang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
NULL check issue found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:1976
dc_link_setup_psr() warn: variable dereferenced before check 'link' (see
line 1970)
We don't use these functions so might as well remove them.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dc_link is at a higher level than link_encoder, and we only want
higher-level components to be able to access lower-level ones,
not the other way around.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For DP active dongles, the dpcd dongle caps are read but not
used to validate mode timing. This addresses this.
In particular, this change fixes light up on the HDMI 4k TV
connected through DP active dongle. Since the 4k TV defaults
to YCbCr420, which the dongle don't support.
This change does not address MST cases, a more generalized
approach must be taken for that.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When link training fail in MST case, we will divide by 0
when calculating avg_time_slots_per_mtp, so we cannot
proceed.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Get rid of the constant we copied over before and just directly use the
constants from the file.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
One of the HDMI ports map to DIGD, which we did not map to DP3 ext
HDMI settings. Add the DIGD case so that we can get proper retimer
settings from SBIOS for that port.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There were cases where the chip caps held additional bits that led to
the retimer/redriver check failing; use the proper mask to ensure that
we have only the bits that we care about for the check in question.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- avoid eDP screen flash 4 times when resume from s3
- improve s3 and boot time
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
There are many occasions we need to retrieve sink capability and
notify connectivity change to os even if edid is not changed
on a HPD toggle.
(HDMI2.0 display needs re-enable link on every hpd,
display changes other capability outside from edid
need to be queried again and possibly reset the mode, etc.)
In these cases we cannot keep the same sink without letting DM know.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A recent commit moved the backlight control code along with the register
defines, but did not move the power control code. This along with
remnant fields in the dce110_link_enc_registers struct made it so that
the code still compiled, but any attempts to access the
LVTMA_PWRSEQ_STATE register led to reading from an address of 0. This
patch corrects that.
Also, rename blacklight_control to edp_backlight_control (Typo fix).
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
link type is not updated before mst topology discovery.
This causes issue when branch device response to link address after before
the start topology discovery event finishes.
[Solution]
update link type to mst before topology discovery
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A previous change moved link_disconnect_sink after dpcd read,
this causes the sink count to be overwritten which in turn causes
another detection to be triggered in the short pulse handler, which
brings down the display.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
None of this code is used currently.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All of these are unused outside the file they are in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Abstractions are frowned upon.
cocci script:
virtual context
virtual patch
virtual org
virtual report
@@
expression ptr;
@@
- dm_alloc(ptr)
+ kzalloc(ptr, GFP_KERNEL)
@@
expression ptr, size;
@@
- dm_realloc(ptr, size)
+ krealloc(ptr, size, GFP_KERNEL)
@@
expression ptr;
@@
- dm_free(ptr)
+ kfree(ptr)
v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
RV1 support only USB-C active DP-2-HDMI dongle. HPD short pulse is
generated only for DP signal.
When processing HPD short pulse, it must be DP active dongle. No need
for I2C-Over-AUX detection.
v2: Add description
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dis_clk is single instance across pipes.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename all the dc validate_context to dc_state and
dc current_context to current_state.
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Change 100104: Move verify link cap after read edid causes MST
link_cap struct not being set. It leads to zero denominator
pbn_per_slot value, leading to the crash at
dal_fixed31_32_div(). Skip MST link training for now and will
need to add MST specific link traning routine later.
2. Change 98822: Adding edp supports changes link setting
condition from max_link to verified_link. It leads to MST is
getting wrong link settings.
e.g. LINK_SPREAD_05_DOWNSPREAD_30KHZ not set in MST case
Signed-off-by: Jerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
-Flattening core_dc to dc
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DP link layer test 400.1.1 fails intermittently.
The test device will pull hpd low immediately
after verify link cap.
Driver reads edid when hpd low that causes the test to fail.
Move read edid before verify link cap, so driver will
read edid before starting link training
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipes->pix_clk_params/pipes->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_with_clk_src->pix_clk_params/pipe_with_clk_src->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/ctx->pix_clk_params->/ctx->stream_res\.pix_clk_params->/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->pix_clk_params/pipe->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_ctx->pix_clk_params/pipe_ctx->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.pix_clk_params/pipe_ctx\[pipe_offset\]\.stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[i\]->pix_clk_params/grouped_pipes\[i\]->stream_^Cs\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[0\]->pix_clk_params/grouped_pipes\[0\]->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[1\]->pix_clk_params/grouped_pipes\[1\]->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]->pix_clk_params/pipe_ctx\[i\]->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx_old->pix_clk_params/pipe_ctx_old->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_set\[j\]->pix_clk_params/pipe_set\[j\]->stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]\.pix_clk_params/pipe_ctx\[i\]\.stream_res\.pix_clk_params/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipes\[i\]\.pix_clk_params/pipes\[i\]\.stream_res\.pix_clk_params/g'
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipes->audio/pipes->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/pipe_with_clk_src->audio/pipe_with_clk_src->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/ctx->audio->/ctx->stream_res\.audio->/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->audio/pipe->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx->audio/pipe_ctx->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.audio/pipe_ctx\[pipe_offset\]\.stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[i\]->audio/grouped_pipes\[i\]->stream_^Cs\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[0\]->audio/grouped_pipes\[0\]->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[1\]->audio/grouped_pipes\[1\]->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]->audio/pipe_ctx\[i\]->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx_old->audio/pipe_ctx_old->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_set\[j\]->audio/pipe_set\[j\]->stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]\.audio/pipe_ctx\[i\]\.stream_res\.audio/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipes\[i\]\.audio/pipes\[i\]\.stream_res\.audio/g'
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipes->stream_enc/pipes->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/ctx->stream_enc->/ctx->stream_res\.stream_enc->/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->stream_enc/pipe->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx->stream_enc/pipe_ctx->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.stream_enc/pipe_ctx\[pipe_offset\]\.stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[i\]->stream_enc/grouped_pipes\[i\]->stream_^Cs\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[0\]->stream_enc/grouped_pipes\[0\]->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/grouped_pipes\[1\]->stream_enc/grouped_pipes\[1\]->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]->stream_enc/pipe_ctx\[i\]->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx_old->stream_enc/pipe_ctx_old->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_set\[j\]->stream_enc/pipe_set\[j\]->stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[i\]\.stream_enc/pipe_ctx\[i\]\.stream_res\.stream_enc/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipes\[i\]\.stream_enc/pipes\[i\]\.stream_res\.stream_enc/g'
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipes->tg/pipes->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/ctx->tg->/ctx->stream_res\.tg->/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe->tg/pipe->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx->tg/pipe_ctx->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i \
's/pipe_ctx\[pipe_offset\]\.tg/pipe_ctx\[pipe_offset\]\.stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/grouped_pipes\[i\]->tg/grouped_pipes\[i\]->stream_^Cs\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/grouped_pipes\[0\]->tg/grouped_pipes\[0\]->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i
's/grouped_pipes\[1\]->tg/grouped_pipes\[1\]->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx\[i\]->tg/pipe_ctx\[i\]->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx_old->tg/pipe_ctx_old->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_set\[j\]->tg/pipe_set\[j\]->stream_res\.tg/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/pipe_ctx\[i\]\.tg/pipe_ctx\[i\]\.stream_res\.tg/g'
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_stream/struct dc_stream_state/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_stream_state_update/struct dc_stream_update/g'
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \
-o -name "*.cpp" -o -name "*.hpp" | \
xargs sed -i 's/struct dc_stream_state_status/struct dc_stream_status/g'
Plus some manual changes
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. The caps detect sequence for edp is different from dp.
Added separate function for edp.
2. Removed max_link_setting and replaced it with verified
to avoid confusion.
3. Reverted sink count guard for edp powerdown as unnecessary
with the changes above.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Description:
HW issue when all the pipes are off, DCE_allow_cstate is 0.
New sequence : blank OTG only instead of previous OTG_master_en=0)
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dce_clocks
Signed-off-by: Amy Zhang <Amy.Zhang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|