summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dc.h
AgeCommit message (Collapse)Author
2023-04-26drm/amd/display: Apply correct panel mode when reinitializing hardwareMichael Mityushkin
[Why] When link training during engine recovery, ASSR might fail causing panel mode to be reset to default. This should not happen for eDP as it will prevent the panel from turning back on. [How] Added dp_panel_mode to struct dc_link to remember previously applied panel mode. Do not reset panel mode to default while performing link training if previously used panel mode = eDP. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Mityushkin <michael.mityushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-11drm/amd/display: 3.2.230Aric Cyr
This DC version brings along: - FW Release 0.0.161.0 - Improvements on FPO/FAMS - Correction to DML calculation - Fix to multiple clock related issues Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-11drm/amd/display: Improve robustness of FIXED_VS link training at DP1 ratesMichael Strauss
[WHY] New sequence for transparent mode DP1.x link training was provided by LTTPR vendor [HOW] Implement new FIXED_VS sequence, increase LT retry count to minimize any potential intermittent lightup failures Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-11drm/amd/display: On clock init, maintain DISPCLK freqAlvin Lee
[Description] - On init if a display is connected, we need to maintain the DISPCLK frequency - Even though DPG_EN=1, the display still requires the correct timing or it could cause audio corruption (if DISPCLK freq is reduced) - Read the current DISPCLK freq and request the same value to ensure the timing is valid and unchanged - However, add option to do a full pipe power down (including link) which will also avoid audio related issues - Disabled for the time being on dcn32 Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-11drm/amd/display: Add FPO + VActive supportAlvin Lee
[Description] - When determining FPO support, include FPO + VActive support - Support FPO + VActive if one display meets regular requirements for FPO and the second display is able to switch in VACTIVE with a given amount of margin Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Promote DAL to 3.2.229Aric Cyr
This DC version brings along: - Enable FPO optimization - Support for 6.75 GBps link rate - Fixes to underflow, black screen and more Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Conditionally enable 6.75 GBps link rateArtem Grishin
[Why] The 6.75 GBps link rate is part of the new eDP specification version 1.5 is going to be supported in the future. Since this standard is very new and there are no existing 6.75 GBps panels on the market yet, we should put a condition in the driver on enabling this feature until we can validate it with real hardware. [How] - Add boolean flag support_eDP1_5 in struct dc_debug_options. - Enable the 6.75 link rate in reduce_link_rate(...) only when the flag is true. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Artem Grishin <Artem.Grishin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Enable FPO for configs that could reduce vlevelAlvin Lee
[Description] - On high refresh rate DRR displays that support VBLANK naturally, UCLK could be idling at DPM1 instead of DPM0 since it doesn't use FPO - To achieve DPM0, enable FPO on these configs even though it can support P-State without FPO - Default disable for now, have debug option to enable Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display: 3.2.228Aric Cyr
This DC version brings along: - Power down eDP if eDP not present - Set MPC_SPLIT_DYNAMIC for DCN10 and DCN301 - Initialize link_srv in virtual env - Code cleanup and alignment Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display: Add function pointer for validate bw usb4Mustapha Ghaddar
[WHY] In order to follow the new protocol of calling link functions [HOW] Add the function pointer to the link_srv Reviewed-by: Kshitij Bhardwaj <kshitij.bhardwaj1@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-22drm/amd/display: Add const to a functionRodrigo Siqueira
When calling the dc_link_bw_kbps_from_raw_frl_link_rate_data from amdgpu_dm, GCC highlighted the following issue: In function ‘get_conv_frl_bw’: error: passing argument 1 of ‘dc_link_bw_kbps_from_raw_frl_link_rate_data’ discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers] 997 | aconnector->dc_link->dc, This commit fix this issue by making DC a constant variable since we only use it to invoke the function bw_kbps_from_raw_frl_link_rate_data(). Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: 3.2.227Aric Cyr
This version brings along the following: - FW Release 0.0.158.0 - Fixes to HDCP, DP MST and more - Improvements on USB4 links and more - Code re-architecture on link.h Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: convert link.h functions to function pointer styleWenjing Liu
[Why & How] All dc subcomponents should call another dc component via function pointers stored in a component structure. This is part of dc coding convention since the beginning. The reason behind this is to improve encapsulation and polymorphism. The function contract is extracted into a single link service structure defined in link.h header file and implemented only in link_factory.c instead of spreading across multiple files in link component file structure. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: remove legacy fields of dc_plane_cap structDavid Tadokoro
The fields blends_with_above and blends_with_below of struct dc_plane_cap (defined in dc/dc.h) are boolean and set to true by default. All instances of a dc_plane_cap maintain the default values of both. Also, there is only one if statement that checks those fields and there would be the same effect if it was deleted (assuming that those fields are always going to be true). For this reason, considering both fields as legacy ones, this commit removes them and the aforementioned if statement. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: 3.2.226Aric Cyr
In this new version there are two major changes: 1) Transitioning to the new DC commit sequence There is an extended effort to migrate to the new DC commit sequence that better adheres to the DCN hardware constraints. Most of the code was upstreamed already but not connected to amdgpu_dm, and in this new DC version, our DM finally started to use it for all ASICs. This should improve stability and enable us to improve how pipe split works. 2) Drop old CONFIG_DRM_AMD_DC_DCN in favor of new CONFIG_DRM_AMD_DC_FP For historical reasons, we created CONFIG_DRM_AMD_DC_DCN to isolate FPU-related code to only be used for DCN. Over the years, we lost control over this guard, and it was spread in multiple areas. In this new DC version, there is an effort to remove all unnecessary CONFIG_DRM_AMD_DC_DCN and replace the others for CONFIG_DRM_AMD_DC_FP, which better describes which type of code this guard is intended for. Finally, this version brings along the following: - Enable HostVM based on rIOMMU active - Keep PHY active for dp confi - Improves Z8 - Update clock table - Code and directives clean up Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Drop dc_commit_state in favor of dc_commit_streamsRodrigo Siqueira
[Why & How] There are two functions responsible for handling the DC commit state: dc_commit_state and dc_commit_streams. Both have the same goal, but dc_commit_streams surpess dc_commit_state in terms of completeness. For this reason, maintaining these two functions makes maintainability unnecessarily complicated. This commit replaces the old dc_commit_state in favor of dc_commit_streams, and removes the old dc_commit_state. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Rename DCN config to FPHarry Wentland
[Why & How] The only reason we have the DCN config is for floating point support. Rename it to make that clear and (hopefully) avoid misuse of the config in the future. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: move dc_link functions in protocols folder to dc_link_exportsWenjing Liu
[why] link component should only have one interface serving dc. [how] We are moving dc_link functions exposed to DM to dc_link_exports and unify link component interface in link.h with function pointer to match the style of other dc component. This is the third step to move dc_link functions under protocols folder to dc_link_exports. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: move dc_link functions in accessories folder to dc_link_exportsWenjing Liu
[why] link component should only have one interface serving dc. [how] We are moving dc_link functions exposed to DM to dc_link_exports and unify link component interface in link.h with function pointer to match the style of other dc component. This is the first step to move dc_link functions under accessories folder to dc_link_exports. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCPHarry Wentland
[Why & How] There is no reason we still need a config option for this. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Add minimum Z8 residency debug optionNicholas Kazlauskas
[Why] Allows finer control and tuning for debug and profiling. [How] Add the debug option into DC. The default remains the same as before for now. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: 3.2.225Aric Cyr
This version brings along the following: - Correct way to find OPP index - Unify DC logging for BW Alloc - Add height granularity limitation for dsc slice height calculation Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: Promote DAL to 3.2.224Aric Cyr
This version brings along the following: - Correct DML calculation - Extend Freesync over Pcon support - Fixes in pstate hang and more - Code cleanup for dc_link.h and dc_link.c Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: merge dc_link.h into dc.h and dc_types.hWenjing Liu
[why] Remove the need to include dc_link.h separately. dc.h should contain everything needed on DM side. [How] Merge dc_link.h into dc.h and dc_types.h so DM only needs to include dc.h to use all link public functions. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: DAL to program DISPCLK WDIVIDER if PMFW doesn'tAlvin Lee
[Why & How] - If for any reason PMFW fails to set the expected (or valid) DISPCLK WDIVIDER, then DAL will program DENTIST DISPCLK WDIVIDER to correct for this issue Reviewed-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-15drm/amd/display: disable SubVP + DRR to prevent underflowAurabindo Pillai
[Why&How] Temporarily disable SubVP+DRR since Xorg has an architectural limitation where freesync will not work in a multi monitor configuration. SubVP+DRR requires that freesync be working. Whether OS has variable refresh setting enabled or not, the state on the crtc remains same unless an application requests VRR. Due to this, there is no way to know whether freesync will actually work or not while we are on the desktop from the kernel's perspective. If userspace does not have a limitation with multi-display freesync (for example wayland), then this feature can be enabled by adding a dcfeaturemask option to amdgpu on the kernel cmdline like: amdgpu.dcfeaturemask=0x200 Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-15drm/amd/display: Promote DAL to 3.2.223Aric Cyr
This version brings along the following: - Move domain power control to DMCUB for DCN314 - Enable P-state validation check for DCN314 - Add support for multiple overlay planes - Fixes in prefetch, k1 k2 divider programming and more - Code cleanup Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: move public dc link function implementation to dc_link_exportsWenjing Liu
[why] Link is a subcomponent in dc. DM should be aware of dc link structure as one of the abstracted objects maintained by dc. However it should have no idea of the existence of a link component in dc dedicated to maintain the states of dc link structure. As such we are moving link interfaces out of dc_link.h and directly added to dc.h. We are grandually fading out the explicit inclusion of dc_link header and eventually delete it. On dc side, since link is a subcomponent behind dc interfaces, it is not a good idea to implement dc interfaces in each individual subcomponent of link which is already a subcomponent of dc. So we are decoupling it by implementing a dc_link_exports in dc. This file will be a thin translation layer that breaks the dependency so link is able to make interface changes without breaking DM. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Extract temp drm mst deallocation wa into its own functionWenjing Liu
[why] A recent change was made to implement temporary workaround due DRM update in MST interfaces. The workaround is added into our generic deallocation MST sequence. This ticket is to extract this temporary workaround into its own function so it is differentiated from our generic sequence. Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: 3.2.222Aric Cyr
This version brings along the following: - FW 0.0.153.0 - Code re-organize for dc_link.c - Bug fixes on rotation, DRR and more Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: Add HDMI manufacturer OUI and device id readLeo (Hanghong) Ma
[Why && How] Add support to read manufacturer OUI and device id from HDMI SCDC. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: 3.2.221Aric Cyr
This version brings along following fixes: - fix linux dp link lost handled only one time - Reset DMUB mailbox SW state after HW reset - Unassign does_plane_fit_in_mall function from dcn3.2 - Add Function delaration in dc_link - Fix crash when connecting 2 displays with video playback - Adjust downscaling limits for dcn314 - fix FCLK pstate change underflow - Fix only one ABM pipe enabled under ODM combined case - Add missing brackets in calculation - Correct bw_params population - Fix Z8 support configurations - Add Debug Log for MST and PCON - fix MALL size hardcoded for DCN321 - add rc_params_override option in dc_dsc_config - Enable Freesync over PCon Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: 3.2.220Aric Cyr
This version brings along following fixes: - Fix timing not changning when freesync video is enabled - avoid disable otg when dig was disabled - Properly reuse completion structure - Pass DSC slice height to PSR FW - merge dc_link_dp into dc_link - move dp cts functions from dc_link_dp to link_dp_cts - move dp irq handler functions from dc_link_dp to link_dp_irq_handler - Enable AdaptiveSync in DC interface - adjust MALL size available for DCN32 and DCN321 - Set init freq for DCFCLK DS - Use |= when assigning wm_optimized_required - move eDP panel control logic to link_edp_panel_control - create accessories, hwss and protocols sub folders in link - Disable SubVP for PSR panels Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: Enable AdaptiveSync in DC interfaceSung Joon Kim
[why] Start enabling AdaptiveSync feature on Linux environment. [how] Adding AdaptiveSync support in DC layer - building AdaptiveSync info_packets - adjusting the v_startup parameter Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: 3.2.219Aric Cyr
This version brings along following fixes: - [FW Promotion] Release 0.0.150.0 - Correcting prefetch mode for fast validate - Set hvm_enabled flag for S/G mode - set allow_freesync parameter in DM - Revert "ignore msa parameter only if freesync is enabled" - Allow idle optimization after turning off all pipes - Guard Freesync HDMI parsing with dc_lock - Speed up DML fast_validate path - Disable MALL SS and messages for PSR supported configs - force connector state when bpc changes during compliance Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: 3.2.218Aric Cyr
This version brings along following fixes: - Revert patches that caused regressions associated with audio and an old change that checks the DCN version. - Refactor DDC and HDP. - Move DPIA and DPCD logic to new files. - Updates to DMUB. - Optimization and bug fixes for SUBVP/DRR. - Drop legacy code. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: contional remove disable dig_fifo when blankCharlene Liu
keep dig_fifo enable for test pattern generation. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-03drm/amd/display: 3.2.217Aric Cyr
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: 3.2.216Aric Cyr
This version brings along following fixes: -Fix array index out of bound error -Speed up DML fast vadlaite -Implement multiple secure display -MST HDCP for multiple display -Add DPIA notification -Add support for three new square pattern variant Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-15drm/amd/display: Add debug bit to disable unbounded requestingDillon Varone
[Description] Add debug bit to disable unbounded requesting. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-06drm/amd/display: 3.2.215Aric Cyr
Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-06drm/amd/display: Add debug option to skip PSR CRTC disableNicholas Kazlauskas
[Why] It's currently tied to Z10 support, and is required for Z10, but we can still support Z10 display off without PSR. We currently need to skip the PSR CRTC disable to prevent stuttering and underflow from occuring during PSR-SU. [How] Add a debug option to allow specifying this separately. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-29drm/amd/display: 3.2.214Aric Cyr
This version brings along following fixes: -Program output transfer function when required -Fix arthmetic errror in MALL size caluclations for subvp -DCC Meta pitch used for MALL allocation -Debugfs entry to tell if connector is DPIA link -Use largest vready_offset in pipe group -Fixes race condition in DPIA Aux transfer Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: 3.2.213Aric Cyr
This version brings along following fixes: -Add configuration 2 for ABM 2.3/2.4. -Add margin for HUBP for SubVp + DRR. -Fix no display after resume from WB/CB. -Limit HW cursor size to be less than 64 x 64 bytes when the stream is >= 4K. -Lower watermarks for enter/enter+exit latency. -Update support types for DCN314 to include z8 only and z8_z10 only state. -Add new value for soc bounding box and dummy pstate. -Override fclk chang latency when calculating prefetch schedule for subvp with low uclk. -Add check for DET fetch latency for dcn32. -Add check if PSR enabled when entering MALL. -Use base MALL allocation size calculations off vewport height. -Add YCBCR2020 to CSC matrix. -Implement DP-Tx portion to interact with DPIA. -Add debug option for increasing phantom lines. -Fix phantom plane/stream retain after fail validation. -Fix display corruption with VSR enable. -Set valid divider value for virtual and FRL/DP2. -Add new num clk levels struct for max mclk index. -Fix check for phantom BPP. -Fix rotated cursor offset calculation. Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add debug options for increasing phantom linesAlvin Lee
[Description] - Add debug option for increasing number of phantom lines Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add Z8 allow states to z-state support listNicholas Kazlauskas
[Why] Even if we block Z9 based on crossover threshold it's possible to allow for Z8. [How] There's support for this on DCN314, so update the support types to include a z8 only and z8_z10 only state. Update the decide_zstate_support function to allow for specifying these modes based on the Z8 threshold. DCN31 has z-state disabled, but still update the legacy code to map z8_only = disallow and z10_z8_only = z10_only to keep the support the same. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amd/display: fix kernel-doc issues in dc.hRandy Dunlap
Fix these kernel-doc complaints: drivers/gpu/drm/amd/display/dc/dc.h:505: warning: cannot understand function prototype: 'struct dc_clocks ' dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID' not described in enum 'pipe_split_policy' dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID_MULT_DISP' not described in enum 'pipe_split_policy' dc.h:532: warning: Incorrect use of kernel-doc format: * @fw_based_mclk_switching Fixes: ea76895ffab1 ("drm/amd/display: Document pipe split policy") Fixes: 1682bd1a6b5f ("drm/amd/display: Expand kernel doc for DC") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: 3.2.212Aric Cyr
DC version 3.2.212 brings along the following fixes: - Fix DPIA AUX timeout issue - Add HUBP surface flip interrupt handler - Fix dpms_off issue when disabling bios mode - Update SubVP Visual Confirm - Program pipes for ODM when removing planes - Use min transition for all SubVP plane add/remove - Support parsing VRAM info v3.0 from VBIOS - Enable dchub request limit for NV32 - Workaround to increase phantom pipe vactive in pipesplit - Fix dcn3.1x mode validation on high bandwidth config - Check context constructed for pipe split flags after pipesplit - Align phantom pipe dst/src scaling with main for subvp - Fix calculation for cursor CAB allocation - Fix unbounded requesting for high pixel rate modes on dcn315 - Revert Disable DRR actions during state commit - Fix array index out of bound error in bios parser - Fix optc2_configure warning on dcn314 - Fix Subvp phantom pipe transition - Fix prefetch calculations for dcn32 - Use uclk pstate latency for fw assisted mclk validation dcn32 - Set max for prefetch lines on dcn32 - Rework macros for DWB register access - Adjust DP 8b10b LT exit behavior Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: enable dchub request limit for DCN 3.2.xJun Lei
[why] HW recommend we enable this for better DF QoS for DCN 3.2.x [how] Add interfaces to hubbub to program register Add initialization as part of init_hw Add default settings for DCN 3.2.x Add registry override for debug/tuning Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-04-19 01:02:19 +0000