| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
HPO is only used for DP2.0. HPO HW control should be
disable when not being used to save power.
[How]
Shutdown HPO HW control during init hw.
Shutdown HPO HW control during stream disable.
Enable HPO HW control during stream enable if DP2.0.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 1445d967fb915156aed0e79ca80c239cb2d414ce.
This patch introduced a couple of dmesg warnings, this is not a valid
approach anymore. For this reason, we are reverting this patch, and we
need to revert the workaround patch.
v2: squash in unused variable removal (Alex)
Cc: Hanghong Ma <hanghong.ma@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
The codes to blank all dp display have been called many times,
so add a helper in dc_link to make it more concise.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Incorrect encoder assignments were being used while applying a new state
to hardware.
(1) When committing a new state to hardware requires resetting the
back-end, the encoder assignments of the current or old state should be
used when disabling the back-end; and the encoder assignments for the
next or new state should be used when re-enabling the back-end.
(2) Link training on hot plug could take over an encoder already in use
by another stream without first disabling it.
[How]
(1) Introduce a resource context 'link_enc_cfg_context' which includes:
- a mode to indicate when transitioning from current to next state.
- transient encoder assignments to use during this state transition.
Update the encoder configuration interface to respond to queries about
encoder assignment based on the mode of operation.
(2) Check if an encoder is already in use before attempting to perform
link training on hot plug.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Assuming DIG link encoders are statically mapped to links can cause
system instability due to null pointer accesses.
[How]
- Add checks for non-null link encoder pointers before trying to access
them.
- When a hardware platform uses dynamic DIG assignment (i.e. resource
function 'link_encs_assign' defined) and a link supports flexible
mapping to DIGs, use the link_enc_cfg API to access the DIG assigned to
a link or stream.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During DQE's promotion test, system hang issue is found on linux
system;
[How]
1. Add NULL pointor check for the link in the sequence trace
function;
2. Get the right link for the stream encoder before blank DP
stream;
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit "Revert "Add DPCD writes at key points" ".
The following patch will fix the system hang issue.
v2: squash in indentation warning fix
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Retrieve 128/132b link cap.
2. 128/132b link training and payload allocation.
3. UHBR10 link rate support.
[squash in warning fixes - Alex]
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Sometimes, DP receiver chip power-controlled externally by an
Embedded Controller could be treated and used as eDP,
if it drives mobile display. In this case,
we shouldn't be doing power-sequencing, hence we can skip
waiting for T7-ready and T9-ready."
[How]
Added a feature mask to enable eDP no power sequencing feature.
To enable this, set 0x10 flag in amdgpu.dcfeaturemask on
Linux command line.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need for a separate flag now that DCN3.1 is not in bring up.
Fold into DRM_AMD_DC_DCN like previous DCN IPs.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the following checkincludes.pl warning:
./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
35 #include "dce110_hw_sequencer.h"
69 #include "dce110_hw_sequencer.h"
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[How]
Add call to get the last used VTOTAL from DC
Signed-off-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why + How]
Visual confirm has no asic-specific logic,
so we can refactor and unify these functions
that are currently spread out across multiple
dcn files.
Add a new hw sequencer interface update_visual_confirm_color,
and a new mpc function pointer set_bg_color.
This will allow visual confirm to updated independently
of MPCC blending updates.
v2: squash in DCN3.1 fixes
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clean up the following includecheck warning:
./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:
dce110_hw_sequencer.h is included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add DCN3.1 specific hardware sequence programming - extending off of
our existing DCN3/DCN2 support.
Extend stream hardware sequencing to include new DCCG programming.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Testing with the photometer shows that at least Raven Ridge DCN-1.0
does not achieve more than 10 bpc effective output precision with a
16 bpc unorm surface of type SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616,
unless linebuffer depth is increased from LB_PIXEL_DEPTH_30BPP to
LB_PIXEL_DEPTH_36BPP. Otherwise precision gets truncated somewhere
to 10 bpc effective depth.
Strangely this increase was not needed on Polaris11 DCE-11.2 during
testing to get 12 bpc effective precision. It also is not needed for
fp16 framebuffers.
Tested on DCN-1.0 and DCE-11.2.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the necessary format definition, bandwidth and pixel size mappings,
prescaler setup, and pixelformat selection, following the logic
already present for SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616.
The new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 is implemented as the
old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 format, but with swapped
red <-> green color channel, by use of the hardware xbar.
Please note that on the DCN 1/2/3 display engines, the pixelformat
in hubp and dpp setup for the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616
and the new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 was changed from
format id 22 to id 26. See amd/include/navi10_enum.h for the meaning
of the id's.
For format 22, the display engine read the framebuffer in 16 bpc format,
but truncated to the 12 bpc actually supported by later pipeline stages.
However, the engine took the 12 LSB of each color component for
truncation, which is incompatible with rendering at least under Vulkan,
where content is 16 bit wide, and a 12 MSB alignment would be appropriate,
if any. Format 20 for ARGB16161616_12MSB does work, but even better, we
can choose format 26 for ARGB16161616_UNORM, keeping all 16 bits around
until later stages of the display pipeline.
This allows to directly consume what the rendering hw produces under
Vulkan for swapchain format VK_FORMAT_R16G16B16A16_UNORM, as tested
with a patched version of the current AMD open-source amdvlk driver
which maps swapchain format VK_FORMAT_R16G16B16A16_UNORM onto
DRM_FORMAT_XBGR16161616.
The old id 22 would cause colorful pixeltrash to be displayed instead.
Tested under DCN-1.0 and DCE-11.2.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
prototypes
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:929:6: warning: no previous prototype for ‘dce110_edp_wait_for_T12’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:927:6: warning: no previous prototype for ‘dce110_edp_wait_for_T12’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Add logs to verify ILR optimization behaviour on boot
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
VBIOS currently sets the max link rate found in eDP 1.4 SUPPORTED_LINK_RATES table
If eDP fastboot optimizations are enabled, the link rate remains at max after init
[How]
Determine optimal link rate during boot, disable seamless boot
and eDP fastboot optimizations if link rate optimization is required
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Change set_drr to pass in the entire dc_crtc_timing_adjust
structure instead of passing in the parameters individually.
This is to more easily pass in required parameters in the
adjust structure when it gets updated.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When driver disabled, we driver force the YCbCr420 to RGB,
which means some register will be changed, such as
RDPCS_PHY_DP_MPLLB_TX_CLK_DIV changed from 1 to 0
When driver re-enabled, OS will Set Mode YCbCr420 again,
which means the register RDPCS_PHY_DP_MPLLB_TX_CLK_DIV
should to be 1 again, but dmub fw can’t update the
register to 1 due to the mpll is not off
[How]
Adds an interface to disable accelerated mode bit,
which allows DM to decide to call during driver
disable/unload scenarios.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not all ASICs have same plane capabilities so need to split them
out for proper support handling.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Atufa Khan <Atufa.Khan@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Panel control always programs instance 0. With multi eDP we need to
support multiple instances.
[How]
Use link index to set different instances for panel control.
Refactored LVTMA control to support multiple instances.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Some existing DC interfaces are optimized to return a single eDP
link/stream. Refactored those DC interfaces to support multiple eDP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: ZhiJie.Zhang <zhangzhijie@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:228: warning: bad line: void
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:233: warning: Function parameter or member 'xfm_dce' not described in 'program_overscan'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:233: warning: Function parameter or member 'data' not described in 'program_overscan'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
reference static
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:266:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[0].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:266:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:267:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[1].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:267:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:268:2: note: in expansion of macro ‘stream_enc_regs’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[2].TMDS_CNTL’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:268:2: note: in expansion of macro ‘stream_enc_regs’
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:66:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:594:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:594:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:599:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:599:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:718:17: warning: no previous prototype for ‘dce110_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:756:20: warning: no previous prototype for ‘dce110_i2c_hw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:771:22: warning: no previous prototype for ‘dce110_clock_source_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:795:6: warning: no previous prototype for ‘dce110_clock_source_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1037:16: warning: no previous prototype for ‘dce110_validate_plane’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1092:16: warning: no previous prototype for ‘dce110_validate_global’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1336:29: warning: no previous prototype for ‘dce110_resource_cap’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:66:
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5936:51: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_SELECT__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:306:2: note: in expansion of macro ‘SE_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5936:51: note: (near initialization for ‘se_shift.DIG_STEREOSYNC_SELECT’)
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_SELECT__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:306:2: note: in expansion of macro ‘SE_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5938:52: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_GATE_EN__SHIFT’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:307:2: note: in expansion of macro ‘SE_SF’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5938:52: note: (near initialization for ‘se_shift.DIG_STEREOSYNC_GATE_EN’)
NB: Snipped for brevity
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
containing prototypes
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:1034:6: warning: no previous prototype for ‘dce110_mem_input_v_construct’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
and line up comments
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator_v.c:54: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_v_enable_crtc'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator_v.c:216: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_v_wait_for_vactive'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'controller_id_to_index'
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_compressor.c:429:14: warning: no previous prototype for ‘controller_id_to_index’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
to standard function headers
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:79: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:124: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_enable_crtc'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:179: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:233: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_disable_crtc'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:258: warning: Function parameter or member 'tg' not described in 'program_horz_count_by_2'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:258: warning: Function parameter or member 'timing' not described in 'program_horz_count_by_2'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:284: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_program_timing_generator'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:284: warning: Function parameter or member 'dc_crtc_timing' not described in 'dce110_timing_generator_program_timing_generator'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:356: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:525: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:561: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1118: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_validate_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1118: warning: Function parameter or member 'timing' not described in 'dce110_timing_generator_validate_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1118: warning: Function parameter or member 'signal' not described in 'dce110_timing_generator_validate_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1174: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_wait_for_vblank'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1198: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_wait_for_vactive'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1208: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1386: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1768: warning: Cannot understand *****************************************************************************
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1801: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_disable_vga'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1851: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_set_overscan_color_black'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1851: warning: Function parameter or member 'color' not described in 'dce110_timing_generator_set_overscan_color_black'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1851: warning: Excess function parameter 'param' description in 'dce110_timing_generator_set_overscan_color_black'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:471:6: warning: no previous prototype for ‘dce_mem_input_v_is_surface_pending’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:486:6: warning: no previous prototype for ‘dce_mem_input_v_program_surface_flip_and_addr’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:563:6: warning: no previous prototype for ‘dce_mem_input_v_program_pte_vm’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:636:6: warning: no previous prototype for ‘dce_mem_input_v_program_surface_config’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:922:6: warning: no previous prototype for ‘dce_mem_input_v_program_display_marks’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:945:6: warning: no previous prototype for ‘dce_mem_input_program_chroma_display_marks’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:966:6: warning: no previous prototype for ‘dce110_allocate_mem_input_v’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:1008:6: warning: no previous prototype for ‘dce110_free_mem_input_v’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kernel-doc header
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:1639: warning: Function parameter or member 'dc' not described in 'dce110_enable_accelerated_mode'
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:1639: warning: Function parameter or member 'context' not described in 'dce110_enable_accelerated_mode'
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'dce110_get_required_compressed_surfacesize
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_compressor.c:415:6: warning: no previous prototype for ‘dce110_get_required_compressed_surfacesize’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'value_crtc_vtotal'
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c: In function ‘dce110_timing_generator_tear_down_global_swap_lock’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1354:12: warning: variable ‘value_crtc_vtotal’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Tony Cheng <Tony.Cheng@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When OS reboots, and panel is turned off, T12 may not be maintained.
T12 is defined as the interval between VDDC off (occurs at shutdown) and
the next VDDC on (occurs when eDP is POST-ed)
[how]
DC already tracks panel power off time. Add a DC interface which DM can
call during shutdown. Ideally this should be as late as possible during
the shutdown sequence so the extra delay is minimal.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The hw supports fp16, this is not only useful for HDR,
but also for standard dynamic range displays, because
it allows to get more precise color reproduction with
about 11 - 12 bpc linear precision in the unorm range
0.0 - 1.0.
Working fp16 scanout+display (and HDR over HDMI) was
verified on a DCE-8 asic, so i assume that the more
recent DCE-10/11 will work equally well, now that
format-specific plane scaling constraints are properly
enforced, e.g., the inability of fp16 to scale on older
hw like DCE-8 to DCE-11.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
enable_link_dp_mst checks that cur_link_settings != unknown to determine
that the link is already enabled, to skip redundant enablement calls for
multiple streams on the same link. During dc_reinitialize_hardware,
cur_link_settings on previously-active links is not cleared, which blocks
MST links from being re-enabled after a reinitialization.
[How]
- check for link_status->link_active instead, as it's the real intent
- clear cur_link_settings when we clear link_active
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
t9 delay func is called twice after setting power off, the unexpected
action results in a doubling of the added 140ms t9 delay
[How]
If the backlight has been turned off, does not turn it off again
Signed-off-by: Sherry <Yao.Wang1@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The current end of T9 delay is relay on polling
sink status by DPCD. But the polling for sink
status change after NoVideoStream_flag set to 0.
[How]
Add function edp_add_delay_for_T9 to add T9 delay.
Move the sink status polling after blank.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some sink devices wish to have access to the minimum
HBlank supported by the ASIC.
[How]
Make the ASIC minimum HBlank available in Source
Device information address 0x340.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A break is not needed if it is preceded by a return or break
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
HDCP 1.4 failed on SL8800 SW w/a test driver use.
[how]
Slow down the HW i2c speed when used by HW i2c.
This request: each acquired_i2c_engine setup the i2c speed needed
and sets the I2c engine for HDCP use at release_engine.
This covers SW using HW i2c engine and HDCP using HW i2c engine.
for dmcu using HW i2c engine, needs add similar logic in dmcu fw.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This addresses the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2740:6:
warning: symbol 'dce110_set_cursor_position' was not declared. Should it
be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2785:6:
warning: symbol 'dce110_set_cursor_attribute' was not declared. Should
it be static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.
[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We dont's turn off backlight before power off eDP (VDD),
which is a violation of eDP specs.
[How]
Power off eDP backlight before power off eDP
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
When link training failures occur for eDP, dp_disable_link_phy
is called which powers OFF eDP panel. After link training retry
delay, the next retry begins by calling dp_enable_link_phy
which does not issue a correspnding eDP panel power ON, leaving
panel powered OFF which leads to display OFF/dark.
[how]
Power ON eDP before next link training retry.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
