summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dce110
AgeCommit message (Collapse)Author
2022-03-04drm/amd/display: Program OPP before ODMWesley Chalmers
[WHY] HW expects OPP to be configured before ODM is enabled. Failure to do so can cause errors. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-24drm/amd/display: Use NULL instead of 0Magali Lemes
Silence the following sparse warnings: ../drivers/gpu/drm/amd/amdgpu/../display/dc/dce112/dce112_resource.c:865:16: sparse: warning: Using plain integer as NULL pointer ../drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:1588:84: sparse: warning: Using plain integer as NULL pointer ../drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2725:84: sparse: warning: Using plain integer as NULL pointer ../drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1919:16: sparse: warning: Using plain integer as NULL pointer v2: drop removal of default case to avoid adding warnings (Alex) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amd/display: keep eDP Vdd on when eDP stream is already enabledZhan Liu
[Why] Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will be cleared to 0 at S3 resume. [How] Keep eDP Vdd on when eDP stream is already enabled. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amd/display: change fastboot timing validationPaul Hsieh
[Why] VBIOS light up eDP with 6bpc but driver use 8bpc without disable valid stream then re-enable valid stream. Some panels can't runtime change color depth. [How] Change fastboot timing validation function. Not only check LANE_COUNT, LINK_RATE...etc Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add setup/reset stream encoder to link_hwssWenjing Liu
[why] Factor setup/reset stream encoder to link hwss. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Change error to warning when hpd remains low for eDPVarone
[WHY?] SKUs that contain an unused eDP connector will throw an error when no display is connected. [HOW?] Change error to a warning. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <divarone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Drop DCN for DP2.x logicWenjing Liu
[Why & How] DCN guard is not necessary for DP2.x relevant logic. Drop them. v2: squash in fix for misplaced #endif (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-19drm/amd/display: change FIFO reset condition to embedded display onlyZhan Liu
[Why] FIFO reset is only necessary for fast boot sequence, where otg is disabled and dig fe is enabled when changing dispclk. Fast boot is only enabled on embedded displays. [How] Change FIFO reset condition to "embedded display only". Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd: move variable to local scopeMario Limonciello
`edp_stream` is only used when backend is enabled on eDP, don't declare the variable outside that scope. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd: add some extra checks that is_dig_enabled is definedMario Limonciello
There are a few places that this isn't checked that could potentially be a NULL pointer access. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd: append missing includesIsabella Basso
This fixes warnings caused by global functions lacking prototypes:, such as: warning: no previous prototype for 'dcn303_hw_sequencer_construct' [-Wmissing-prototypes] 12 | void dcn303_hw_sequencer_construct(struct dc *dc) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... warning: no previous prototype for ‘amdgpu_has_atpx’ [-Wmissing-prototypes] 76 | bool amdgpu_has_atpx(void) { | ^~~~~~~~~~~~~~~ Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: Fix dual eDP abnormal display issueBrandon Syu
[WHY] Driver use primary eDP link stream as the condition to enable fastboot or not. In dual eDP case, set second screen only, this would cause slave eDP timing to be used on primary one. [HOW] Add a check for unmatched eDP link stream. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: Fix for otg synchronization logicMeenakshikumar Somasundaram
[Why] During otg sync trigger, plane states are used to decide whether the otg is already synchronized or not. There are scenarions when otgs are disabled without plane state getting disabled and in such case the otg is excluded from synchronization. [How] Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe. When a otg is disabled/enabled, pipe_idx_syncd is reset to itself. On sync trigger, pipe_idx_syncd is checked to decide whether a otg is already synchronized and the otg is further included or excluded from synchronization. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Fix eDP will flash when boot to OSBrandon Syu
[WHY] With eDP DSC enabled and set 4K 60Hz, there would be screen corruption when booting to OS or enabling the driver. [HOW] Avoid powering down VDD when we cannot apply eDP fast boot. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Reset fifo after enable otgXu, Jinze
[Why] In fast boot sequence, when change dispclk, otg is disabled but digfe is enabled. This may cause dig fifo error. [How] Reset dig fifo after enable otg. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/display: Add helper for blanking all dp displaysLeo (Hanghong) Ma
[Why & How] 1. The code to blank all dp display have been called many times, so add helpers in dc_link to make it more concise. 2. Add some check to fix the dmesg errors at boot and resume from S3 on dcn3.1 during DQE's promotion test. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03drm/amd/display: Added HPO HW control shutdown supportJake Wang
[Why] HPO is only used for DP2.0. HPO HW control should be disable when not being used to save power. [How] Shutdown HPO HW control during init hw. Shutdown HPO HW control during stream disable. Enable HPO HW control during stream enable if DP2.0. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19Revert "drm/amd/display: Add helper for blanking all dp displays"Agustin Gutierrez
This reverts commit 1445d967fb915156aed0e79ca80c239cb2d414ce. This patch introduced a couple of dmesg warnings, this is not a valid approach anymore. For this reason, we are reverting this patch, and we need to revert the workaround patch. v2: squash in unused variable removal (Alex) Cc: Hanghong Ma <hanghong.ma@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Add helper for blanking all dp displaysLeo (Hanghong) Ma
[Why & How] The codes to blank all dp display have been called many times, so add a helper in dc_link to make it more concise. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix dynamic encoder reassignmentJimmy Kizito
[Why] Incorrect encoder assignments were being used while applying a new state to hardware. (1) When committing a new state to hardware requires resetting the back-end, the encoder assignments of the current or old state should be used when disabling the back-end; and the encoder assignments for the next or new state should be used when re-enabling the back-end. (2) Link training on hot plug could take over an encoder already in use by another stream without first disabling it. [How] (1) Introduce a resource context 'link_enc_cfg_context' which includes: - a mode to indicate when transitioning from current to next state. - transient encoder assignments to use during this state transition. Update the encoder configuration interface to respond to queries about encoder assignment based on the mode of operation. (2) Check if an encoder is already in use before attempting to perform link training on hot plug. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix dynamic link encoder access.Jimmy Kizito
[Why] Assuming DIG link encoders are statically mapped to links can cause system instability due to null pointer accesses. [How] - Add checks for non-null link encoder pointers before trying to access them. - When a hardware platform uses dynamic DIG assignment (i.e. resource function 'link_encs_assign' defined) and a link supports flexible mapping to DIGs, use the link_enc_cfg API to access the DIG assigned to a link or stream. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix system hang at bootLeo (Hanghong) Ma
[Why] During DQE's promotion test, system hang issue is found on linux system; [How] 1. Add NULL pointor check for the link in the sequence trace function; 2. Get the right link for the stream encoder before blank DP stream; Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add DPCD writes at key pointsLeo (Hanghong) Ma
This reverts commit "Revert "Add DPCD writes at key points" ". The following patch will fix the system hang issue. v2: squash in indentation warning fix Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 SST DC SupportFangzhi Zuo
1. Retrieve 128/132b link cap. 2. 128/132b link training and payload allocation. 3. UHBR10 link rate support. [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-29drm/amd/display: Enabling eDP no power sequencing with DAL feature maskZhan Liu
[Why] Sometimes, DP receiver chip power-controlled externally by an Embedded Controller could be treated and used as eDP, if it drives mobile display. In this case, we shouldn't be doing power-sequencing, hence we can skip waiting for T7-ready and T9-ready." [How] Added a feature mask to enable eDP no power sequencing feature. To enable this, set 0x10 flag in amdgpu.dcfeaturemask on Linux command line. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-22drm/amdgpu/display: fold DRM_AMD_DC_DCN3_1 into DRM_AMD_DC_DCNAlex Deucher
No need for a separate flag now that DCN3.1 is not in bring up. Fold into DRM_AMD_DC_DCN like previous DCN IPs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-10drm: display: Remove duplicate include in dce110Wan Jiabing
Fix the following checkincludes.pl warning: ./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c 35 #include "dce110_hw_sequencer.h" 69 #include "dce110_hw_sequencer.h" Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Return last used DRR VTOTAL from DCJayendran Ramani
[How] Add call to get the last used VTOTAL from DC Signed-off-by: Jayendran Ramani <Jayendran.Ramani@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Refactor visual confirmWyatt Wood
[Why + How] Visual confirm has no asic-specific logic, so we can refactor and unify these functions that are currently spread out across multiple dcn files. Add a new hw sequencer interface update_visual_confirm_color, and a new mpc function pointer set_bg_color. This will allow visual confirm to updated independently of MPCC blending updates. v2: squash in DCN3.1 fixes Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-07drm/amd/display: Fix duplicate included dce110_hw_sequencer.hJiapeng Chong
Clean up the following includecheck warning: ./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c: dce110_hw_sequencer.h is included more than once. No functional change. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-04drm/amd/display: Add DCN3.1 HWSEQNicholas Kazlauskas
Add DCN3.1 specific hardware sequence programming - extending off of our existing DCN3/DCN2 support. Extend stream hardware sequencing to include new DCCG programming. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Increase linebuffer pixel depth to 36bpp.Mario Kleiner
Testing with the photometer shows that at least Raven Ridge DCN-1.0 does not achieve more than 10 bpc effective output precision with a 16 bpc unorm surface of type SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616, unless linebuffer depth is increased from LB_PIXEL_DEPTH_30BPP to LB_PIXEL_DEPTH_36BPP. Otherwise precision gets truncated somewhere to 10 bpc effective depth. Strangely this increase was not needed on Polaris11 DCE-11.2 during testing to get 12 bpc effective precision. It also is not needed for fp16 framebuffers. Tested on DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Add support for SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616.Mario Kleiner
Add the necessary format definition, bandwidth and pixel size mappings, prescaler setup, and pixelformat selection, following the logic already present for SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616. The new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 is implemented as the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 format, but with swapped red <-> green color channel, by use of the hardware xbar. Please note that on the DCN 1/2/3 display engines, the pixelformat in hubp and dpp setup for the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 and the new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 was changed from format id 22 to id 26. See amd/include/navi10_enum.h for the meaning of the id's. For format 22, the display engine read the framebuffer in 16 bpc format, but truncated to the 12 bpc actually supported by later pipeline stages. However, the engine took the 12 LSB of each color component for truncation, which is incompatible with rendering at least under Vulkan, where content is 16 bit wide, and a 12 MSB alignment would be appropriate, if any. Format 20 for ARGB16161616_12MSB does work, but even better, we can choose format 26 for ARGB16161616_UNORM, keeping all 16 bits around until later stages of the display pipeline. This allows to directly consume what the rendering hw produces under Vulkan for swapchain format VK_FORMAT_R16G16B16A16_UNORM, as tested with a patched version of the current AMD open-source amdvlk driver which maps swapchain format VK_FORMAT_R16G16B16A16_UNORM onto DRM_FORMAT_XBGR16161616. The old id 22 would cause colorful pixeltrash to be displayed instead. Tested under DCN-1.0 and DCE-11.2. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display/dc/dce110/dce110_hw_sequencer: Include header containing our ↵Lee Jones
prototypes Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:929:6: warning: no previous prototype for ‘dce110_edp_wait_for_T12’ [-Wmissing-prototypes] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display/dc/dce110/dce110_hw_sequencer: Include our own headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:927:6: warning: no previous prototype for ‘dce110_edp_wait_for_T12’ [-Wmissing-prototypes] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: Add link rate optimization logs for ILRMichael Strauss
[Why&How] Add logs to verify ILR optimization behaviour on boot Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Disable boot optimizations if ILR optimzation is requiredMichael Strauss
[Why] VBIOS currently sets the max link rate found in eDP 1.4 SUPPORTED_LINK_RATES table If eDP fastboot optimizations are enabled, the link rate remains at max after init [How] Determine optimal link rate during boot, disable seamless boot and eDP fastboot optimizations if link rate optimization is required Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Change input parameter for set_drrAlvin Lee
[Why] Change set_drr to pass in the entire dc_crtc_timing_adjust structure instead of passing in the parameters individually. This is to more easily pass in required parameters in the adjust structure when it gets updated. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: add a func to disable accelerated modeYao Wang1
[Why] When driver disabled, we driver force the YCbCr420 to RGB, which means some register will be changed, such as RDPCS_PHY_DP_MPLLB_TX_CLK_DIV changed from 1 to 0 When driver re-enabled, OS will Set Mode YCbCr420 again, which means the register RDPCS_PHY_DP_MPLLB_TX_CLK_DIV should to be 1 again, but dmub fw can’t update the register to 1 due to the mpll is not off [How] Adds an interface to disable accelerated mode bit, which allows DM to decide to call during driver disable/unload scenarios. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Separate caps for maximum RGB and YUV plane countsAtufa Khan
Not all ASICs have same plane capabilities so need to split them out for proper support handling. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Atufa Khan <Atufa.Khan@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Added multi instance support for panel controlJake Wang
[Why] Panel control always programs instance 0. With multi eDP we need to support multiple instances. [How] Use link index to set different instances for panel control. Refactored LVTMA control to support multiple instances. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Refactored DC interfaces to support multiple eDPJake Wang
[Why & How] Some existing DC interfaces are optimized to return a single eDP link/stream. Refactored those DC interfaces to support multiple eDP. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amdgpu: Repeat assignment to max_slave_planesZhiJie.Zhang
Signed-off-by: ZhiJie.Zhang <zhangzhijie@loongson.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display/dc/dce110/dce110_transform_v: Demote kernel-doc abuseLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:228: warning: bad line: void drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:233: warning: Function parameter or member 'xfm_dce' not described in 'program_overscan' drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_transform_v.c:233: warning: Function parameter or member 'data' not described in 'program_overscan' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display/dc/dce110/dce110_resource: Make local functions invoked by ↵Lee Jones
reference static Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:266:2: note: in expansion of macro ‘stream_enc_regs’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[0].TMDS_CNTL’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:266:2: note: in expansion of macro ‘stream_enc_regs’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:267:2: note: in expansion of macro ‘stream_enc_regs’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[1].TMDS_CNTL’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:267:2: note: in expansion of macro ‘stream_enc_regs’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:268:2: note: in expansion of macro ‘stream_enc_regs’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:262:15: note: (near initialization for ‘stream_enc_regs[2].TMDS_CNTL’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:268:2: note: in expansion of macro ‘stream_enc_regs’ In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:66: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:276:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:553:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:557:3: note: in expansion of macro ‘HWSEQ_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:594:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:594:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:599:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:599:3: note: in expansion of macro ‘MI_DCE11_MASK_SH_LIST’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:718:17: warning: no previous prototype for ‘dce110_aux_engine_create’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:756:20: warning: no previous prototype for ‘dce110_i2c_hw_create’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:771:22: warning: no previous prototype for ‘dce110_clock_source_create’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:795:6: warning: no previous prototype for ‘dce110_clock_source_destroy’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1037:16: warning: no previous prototype for ‘dce110_validate_plane’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1092:16: warning: no previous prototype for ‘dce110_validate_global’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:1336:29: warning: no previous prototype for ‘dce110_resource_cap’ [-Wmissing-prototypes] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display/dc/dce110/Makefile: Ignore -Woverride-init warningLee Jones
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:66: drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5936:51: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_SELECT__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:306:2: note: in expansion of macro ‘SE_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5936:51: note: (near initialization for ‘se_shift.DIG_STEREOSYNC_SELECT’) drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_SELECT__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:306:2: note: in expansion of macro ‘SE_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5938:52: warning: initialized field overwritten [-Woverride-init] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:116:16: note: in expansion of macro ‘DIG_FE_CNTL__DIG_STEREOSYNC_GATE_EN__SHIFT’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_stream_encoder.h:307:2: note: in expansion of macro ‘SE_SF’ drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_resource.c:272:3: note: in expansion of macro ‘SE_COMMON_MASK_SH_LIST_DCE110’ drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_11_0_sh_mask.h:5938:52: note: (near initialization for ‘se_shift.DIG_STEREOSYNC_GATE_EN’) NB: Snipped for brevity Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display/dc/dce110/dce110_mem_input_v: Include our own header, ↵Lee Jones
containing prototypes Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_mem_input_v.c:1034:6: warning: no previous prototype for ‘dce110_mem_input_v_construct’ [-Wmissing-prototypes] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lee Jones <lee.jones@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display/dc/dce110/dce110_timing_generator_v: Demote kernel-doc abuse ↵Lee Jones
and line up comments Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator_v.c:54: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_v_enable_crtc' drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator_v.c:216: warning: Function parameter or member 'tg' not described in 'dce110_timing_generator_v_wait_for_vactive' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display/dc/dce110/dce110_compressor: Strip out unused function ↵Lee Jones
'controller_id_to_index' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_compressor.c:429:14: warning: no previous prototype for ‘controller_id_to_index’ [-Wmissing-prototypes] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lee Jones <lee.jones@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-05-07 09:32:36 +0000