summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn21
AgeCommit message (Collapse)Author
2023-08-07drm/amd/display: rename acquire_idle_pipe_for_layer to ↵Wenjing Liu
acquire_free_pipe_as_sec_dpp_pipe [why] Secondary DPP pipes are used for rendering secondary layers of planes. The name "for layer" doesn't make it obvious. The function is acquiring a free pipe as secondary dpp pipe only. We rename it so it is more obvious. In a future follow up change, we want to add functions to acquire free pipe as opp head pipe or otg master pipe as well. They will have their separate allocation priority. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Add structs for Freesync Panel ReplayBhawanpreet Lakha
In some instances, the GPU is transmitting repeated frame to the sink without any updates or changes in the content. These repeat transmission are wasteful, resulting in power draw in different aspects of the system 1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic prevents power down of parts of this HW path. 2. GPU is transmitting pixel data to the display through the main link of the DisplayPort interface. This prevents power down of both the Source transmitter (TX) and the Sink receiver (RX)  The concepts of utilizing replay is similar to PSR, but there is a benefit of: Source and Sink remaining synchronized which allows for - lower latency when switching from replay to live frames - enable the possibility of more use cases - easy control of the sink's refresh rate during replay Due to Source and Sink remaining timing synchronized, Replay can be activated in more UI scenarios. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Refactor recout calculation with a more generic formulaWenjing Liu
[Why] Current recout calculation has a few assumptions and implementation for MPO + ODM combine calculation is very specific. The equation has too many cases without enough comments to document the detail. [How] The change remove the following assumptions: 1. When MPO is enabled, we only allow ODM Combine 2:1 2. ODM Combine always has even segment width. 3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from its top pipe. The change applies a generic formula with more details in comment to document this solution so it is eaiser to learn and debug later. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Add missing staticRodrigo Siqueira
After enable DRM_AMDGPU_WERROR, clang highlight multiple functions that need to have `static`, and this commit address those issues and also improve the indents. Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Refactor fast update to use new HWSS build sequenceAlvin Lee
[Description] - Refactor HW sequencer to use a build / execute sequence - Also move gamma updates to become fast v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'") Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: remove unused definitionYang Li
Eliminate the following warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:1222:43: warning: unused variable 'res_create_maximus_funcs' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:658:38: warning: unused variable 'debug_defaults_diags' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296 Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add visual confirm color support for MCLK switchLeo (Hanghong) Ma
[Why && How] We would like to have visual confirm color support for MCLK switch. 1. Set visual confirm color to yellow: Vblank MCLK switch. 2. Set visual confirm color to cyan: FPO + Vblank MCLK switch. 3. Set visual confirm color to pink: Vactive MCLK switch. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-21drm/amd/display: Remove unused variables in dcn21_hwseq.cSrinivasan Shanmugam
Fix the below compiler error: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hwseq.c:229:11: error: unused variable 'otg_inst' [-Werror,-Wunused-variable]         uint32_t otg_inst = pipe_ctx->stream_res.tg->inst;                  ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_hwseq.c:226:20: error: unused variable 'cmd' [-Werror,-Wunused-variable]         union dmub_rb_cmd cmd; Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Yongqiang Sun <yongqiang.sun@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: refactor dmub commands into single functionJosip Pavic
[Why & How] Consolidate dmub access to a single interface. This makes it easier to add code in the future that needs to run every time a dmub command is requested (e.g. instrumentation, locking etc). Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Fix ABM pipe/backlight issues when change backlightLeon Huang
[Why] set ABM pipe/backlight gets some issues when abm callback func pointers are NULL. For some usecase, driver would like to control PWM level before ABM resource is ready. However, recent flow refactor of ABM didn't consider that use case. [How] Rollback flow that sending inbox command to dmub directly when ABM function pointers aren't ready. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: convert link.h functions to function pointer styleWenjing Liu
[Why & How] All dc subcomponents should call another dc component via function pointers stored in a component structure. This is part of dc coding convention since the beginning. The reason behind this is to improve encapsulation and polymorphism. The function contract is extracted into a single link service structure defined in link.h header file and implemented only in link_factory.c instead of spreading across multiple files in link component file structure. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: remove legacy fields of dc_plane_cap structDavid Tadokoro
The fields blends_with_above and blends_with_below of struct dc_plane_cap (defined in dc/dc.h) are boolean and set to true by default. All instances of a dc_plane_cap maintain the default values of both. Also, there is only one if statement that checks those fields and there would be the same effect if it was deleted (assuming that those fields are always going to be true). For this reason, considering both fields as legacy ones, this commit removes them and the aforementioned if statement. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08Revert "drm/amdgpu/display: change pipe policy for DCN 2.1"Alex Deucher
This reverts commit fa458eb10dc7218146a84e6d2e072424e64d188a. The issue is no longer present even with this commit present as verified by the original reporter. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1849#note_1759599 Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2023-02-08drm/amd/display: break down dc_link.cWenjing Liu
[why] dc_link contains over 30k line of code, the decision is to break it down to files residing in link folder based on functionality. This change is the last break down change which will remove dc_link.c file after everything is broken down. [how] Move remaining dc_link.c functions into link_detection, link_dpms, link_validation, link_resource, and link_fpga and remove dc_link. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: Trivial swizzle-related code clean-upsGuilherme G. Piccoli
This is a very trivial code clean-up related to commit 5468c36d6285 ("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit added a validation on driver probe to prevent invalid TMDS modes, but one of the fake properties (swizzle) ended-up causing a warning on driver probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264. It was fixed by commit a1cbe6916f44 ("drm/amd/display: patch cases with unknown plane state to prevent warning"), but the validation code had a double variable assignment, which we hereby remove. Also, the fix relies in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we took the opportunity to perform a small code clean-up in such routines. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sung Joon Kim <Sungjoon.Kim@amd.com> Cc: Swapnil Patel <Swapnil.Patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: refactor ddc logic from dc_link_ddc to link_ddcWenjing Liu
[why] 1. Move dd_link_ddc functions to link_ddc. 2. Move link ddc functions declaration exposed in dc to link.h 3. Move link ddc functions declaration exposed in dm to dc_link.h 4. Remove i2caux_interface.h file Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-09drm/amd/display: Fix spelling mistake: "dram_clk_chanage" -> "dram_clk_change"Colin Ian King
There is a spelling mistake in the struct field dram_clk_chanage. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: rework macros for DWB register accessAurabindo Pillai
[Why] A hack was used to access DWB register due to difference in the register naming convention which was not compatible with existing SR/SRI* macros. The additional macro needed were added to dwb ip specific header file (dcnxx_dwb.h) instead of soc resource file (dcnxx_resource.c). Due to this pattern, BASE macro had to be redefined in dcnxx_dwb.h, which in turn needed us to undefine them in the resource file. [How] Add a separate macro for DWB access to the resource files that need it instead of defining them in DWB ip header file. This will enable us to reuse the BASE macro defined in the resource file. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Refactor eDP PSR codesIan Chen
We split out PSR config from "global" to "per-panel" config settings. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Refactor edp ILR caps codesIan Chen
We split out ILR config from "global" to "per-panel" config settings. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: prevent S4 test from failingCharlene Liu
[why] limit the vm prefetch check for now, until the feature is fully verified. Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: rework recent update PHY state commitWenjing Liu
[why] Original change 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: avoid doing vm_init multiple timeCharlene Liu
[why] this is to ensure that driver will not reprogram hvm_prefetch_req again if it is done. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add dc_ctx to link_enc_create() parametersAurabindo Pillai
[Why&How] Preparation to enable run time initialization of register offsets to add dc_context to the link_enc_create callback. This is needed to get the dc_ctx handle where register offset initialization routine is called. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: rename hdmi_frl_pcon_supportHamza Mahfooz
hdmi_frl_pcon_support has been the source of confusion. So, rename it to dp_hdmi21_pcon_support. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-21drm/amd/display: Fix memory leak in dcn21_clock_source_createMiaoqian Lin
When dcn20_clk_src_construct() fails, we need to release clk_src. Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-06drm/amdgpu/display: change pipe policy for DCN 2.1Benjamin Marty
Fixes crash on MST Hub disconnect. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849 Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split") Signed-off-by: Benjamin Marty <info@benjaminmarty.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: move FPU operations from dcn21 to dml/dcn20 folderMelissa Wen
dml/dcn20_fpu file centralizes all DCN2x functions that require FPU access. Therefore, this patch moves FPU-related code from dcn21 to dcn20_fpu. These include: - dcn21_populate_dml_pipes_from_context() - dcn21_validate_bandwidth_fp() and related: - dcn21_calculate_wm(), - patch_bounding_box(), - calculate_wm_set_for_vlevel() - renaming update_bw_bounding_box() to dcn21_update_bw_bounding_box(), move to dcn20_fpu with related static function construct_low_pstate_lvl() Also, make dcn21_fast_validate_bw() public in dcn21_resource as it is called by dcn21_validate_bandwidth_fp() now in dcn20_fpu. Reuse dcn20_fpu_adjust_dppclk() in dcn21_fast_validate_bw() as it isolates the same FPU operation. Include dchubbub.h as it is required in dcn21_populate_dml_pipes_from_context() Signed-off-by: Melissa Wen <mwen@igalia.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: move FPU-related code from dcn20 to dml folderMelissa Wen
Move parts of dcn20 code that uses FPU to dml folder. It aims to isolate FPU operations as described by series: drm/amd/display: Introduce FPU directory inside DC https://patchwork.freedesktop.org/series/93042/ This patch moves the following functions from dcn20_resource to dml/dcn20_fpu and calls of public functions in dcn20_resource are wrapped by DC_FP_START/END(): - void dcn20_populate_dml_writeback_from_context - static bool is_dtbclk_required() - static enum dcn_zstate_support_state() - void dcn20_calculate_dlg_params() - static void swizzle_to_dml_params() - int dcn20_populate_dml_pipes_from_context() - void dcn20_calculate_wm() - void dcn20_cap_soc_clocks() - void dcn20_update_bounding_box() - void dcn20_patch_bounding_box() - bool dcn20_validate_bandwidth_fp() This movement also affects dcn21/30/31, as dcn20_calculate_dlg_params() is used by them. For this reason, I included dcn20_fpu headers in dcn20_resource headers to make dcn20_calculate_dlg_params() visible to dcn21/30/31. Three new functions are created to isolate well-delimited FPU operations: - void dcn20_fpu_set_wb_arb_params(): set cli_watermark, pstate_watermark and time_per_pixel from wb_arb_params (struct mcif_arb_params), since those uses FPU operations on double types: WritebackUrgentWatermark, WritebackDRAMClockChangeWatermark, '16.0'. - void dcn20_fpu_set_wm_ranges(): set min_fill_clk_mhz and max_fill_clk_mhz involves FPU calcs on dram_speed_mts (double type); - void dcn20_fpu_adjust_dppclk(): adjust operation on RequiredDPPCLK that is a double. Signed-off-by: Melissa Wen <mwen@igalia.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Changed pipe split policy to allow for multi-display pipe splitAngus Wang
[WHY] Current implementation of pipe split policy prevents pipe split with multiple displays connected, which caused the MCLK speed to be stuck at max [HOW] Changed the pipe split policies so that pipe split is allowed for multi-display configurations Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Angus Wang <angus.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd/display: fix function scopesIsabella Basso
This turns previously global functions into static, thus removing compile-time warnings such as: warning: no previous prototype for 'get_highest_allowed_voltage_level' [-Wmissing-prototypes] 742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param' [-Wmissing-prototypes] 102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes since v1: - As suggested by Rodrigo Siqueira: 1. Rewrite function signatures to make them more readable. 2. Get rid of unused functions in order to remove 'defined but not used' warnings. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd: append missing includesIsabella Basso
This fixes warnings caused by global functions lacking prototypes:, such as: warning: no previous prototype for 'dcn303_hw_sequencer_construct' [-Wmissing-prototypes] 12 | void dcn303_hw_sequencer_construct(struct dc *dc) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... warning: no previous prototype for ‘amdgpu_has_atpx’ [-Wmissing-prototypes] 76 | bool amdgpu_has_atpx(void) { | ^~~~~~~~~~~~~~~ Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: Add DP-HDMI FRL PCON Support in DCFangzhi Zuo
Change since v1: add brief description 1. Add hdmi frl pcon support to existing asic family. 2. Determine pcon frl capability based on pcon dpcd. 3. pcon frl is taken into consideration into mode validation. v2: squash in warning fix (Alex) Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Re-arrange FPU code structure for dcn2xQingqing Zhuo
[Why] Current FPU code for DCN2x is located under dml/dcn2x. This is not aligned with DC's general source tree structure. [How] Move FPU code for DCN2x to dml/dcn20. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Move specific DCN2x code that uses FPU to DMLRodrigo Siqueira
The display core files rely on FPU, which requires to be compiled with special flags. Ideally, we don't want these FPU operations spread around the DC code; nevertheless, it happens in the current source. This commit introduces a new directory inside DML for centralizing shared DCN functions that require FPU and have been used outside DML. For illustrating this process of transferring FPU functions to the DML folder, this commit moves one of the functions dcn20_populate_dml_writeback_from_context) that require FPU access to a single shared file. Notice that this is the first part of the work, and it does not fix the FPU issue yet; we still need other patches for achieving the complete FPU isolation. Changes since V3: - Jun: Instead of creating a new directory to keep the FPU code, let's make the DML folder the only part that requires FPU access. Drop fpu_operation folder. - Christian: Fix function code style. Changes since V2: - Christian: Remove unnecessary wrapper. - lkp: Add missing prototype. - Only compile the FPU operations if the DCN option is enabled. Change since V1: - Update documentation and rebase. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add missing DCN21 IP parameterVictor Lu
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Enable eDP ILR on DCN2.1Michael Strauss
[WHY] Enable feature for 21.40 Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: log additional register state for debugJosip Pavic
[Why & How] Extend existing state collection functions to add some additional registers useful for debug, and add state collection function for DC hubbub Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Add interface for ADD & DROP PIXEL RegistersWesley Chalmers
[WHY] HW has handed down a new sequence that requires access to these registers. v2: squash in DCN3.1 fixes (Alex) Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Add Interface to set FIFO ERRDET SW OverrideWesley Chalmers
[WHY] HW has handed down a new sequence which requires access to the FIFO ERRDET SW Override register. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Revert "Fix clock table filling logic"Ilya Bakoulin
[Why] This change was found to break some high-refresh modes. Reverting to unblock mainline. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Refactor visual confirmWyatt Wood
[Why + How] Visual confirm has no asic-specific logic, so we can refactor and unify these functions that are currently spread out across multiple dcn files. Add a new hw sequencer interface update_visual_confirm_color, and a new mpc function pointer set_bg_color. This will allow visual confirm to updated independently of MPCC blending updates. v2: squash in DCN3.1 fixes Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27Revert "drm/amd/display: Refactor and add visual confirm for HW Flip Queue"Qingqing Zhuo
This reverts commit 3ca402375a2197579d1029e7fa9d856847fe0e7b. Recent visual confirm changes are regressing the driver, causing a black screen on boot in some green sardine configs, or visual confirm is not updated at all. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/display: Refactor and add visual confirm for HW Flip QueueWyatt Wood
[Why] Visual confirm will indicate if driver is programming the surface address. Refactor is required because much of the visual confirm logic is buried deep in the mpcc files. In addition, visual confirm is not updated during fast updates. [How] In order to have visual confirm for driver flips, visual confirm needs to be updated on every frame, including fast updates. Add a new hw sequencer interface update_visual_confirm_color, and a new mpc function pointer set_bg_color. v2: drop unused variable (Alex) Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-10drm/amd/display: Fix clock table filling logicIlya Bakoulin
[Why] Currently, the code that fills the clock table can miss filling information about some of the higher voltage states advertised by the SMU. This, in turn, may cause some of the higher pixel clock modes (e.g. 8k60) to fail validation. [How] Fill the table with one entry per DCFCLK level instead of one entry per FCLK level. This is needed because the maximum FCLK does not necessarily need maximum voltage, whereas DCFCLK values from SMU cover the full voltage range. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-28drm/amd/display: Added multi instance support for ABMJake Wang
[WHY & HOW] ABM assumes only 1 eDP is connected. Refactored existing ABM interface to support multiple instances. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <waynelin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Added support for multiple eDP BL controlJake Wang
[WHY & HOW] Driver currently assumes only 1 eDP is connected. Added support for multiple eDP BL control. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add function and debugfs to dump DCC_EN bitVictor Lu
[why] Currently to view the DCC_EN bit the entire DTN log must be dumped. A compact method to view the DCC_EN bit is desirable. [how] Introduce new debugfs interface that only dumps the DCC_EN bit. Example usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: revert max lb lines changeDmytro Laktyushkin
Some hardware revisions do have a max number of lines limitation not honouring which can cause pstate switch underflow. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-05-04 02:18:34 +0000