summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn32
AgeCommit message (Collapse)Author
2023-10-04drm/amd/display: enable dsc_clk even if dsc_pg disabledMuhammad Ahmed
[why] need to enable dsc_clk regardless dsc_pg Reviewed-by: Charlene Liu <charlene.liu@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: set stream gamut remap matrix to MPC for DCN3+Melissa Wen
dc->caps.color.mpc.gamut_remap says there is a post-blending color block for gamut remap matrix for DCN3 HW family and newer versions. However, those drivers still follow DCN10 programming that remap stream gamut_remap_matrix to DPP (pre-blending). To enable pre-blending and post-blending gamut_remap matrix supports at the same time, set stream gamut_remap to MPC and plane gamut_remap to DPP for DCN families that support both. It was tested using IGT KMS color tests for DRM CRTC CTM property and it preserves test results. Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: switch DC over to the new DRM logging macrosHamza Mahfooz
For multi-GPU systems it is difficult to tell which GPU a particular message is being printed for and that is undesirable because it complicates debugging efforts. Also, the new macros allow us to enable logging for particular parts of the codebase more selectively (since we no longer need to throw everything at DRM_DEBUG_KMS()). So, for the reasons outlined above we should switch to the new macros. We can accomplish this by using the existing DC_LOGGER code to pass around the relevant `struct drm_device` which will be fed to the new macros in logger_types.h. Also, we must get rid of all instances of the DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use the DC logger there and we can simply refer to the macros directly there instead. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Fix DP2.0 timing syncIlya Bakoulin
[Why] Triggering OTG sync before all OTG/HPO clock programming is complete causes timing sync to fail and a subsequent P-state hang. [How] Move DTB clock programming earlier in the sequence to enable_stream_timing. Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Use optc32 instead of optc30 in DCOvidiu Bunea
Change DC to use optc32, which uses REG_UPDATE instead of REG_SET. REG_SET clears OTG_H_TIMING_DIV_MODE_MANUAL which must be set to 1 in some specific HDMI configurations. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: add skip_implict_edp_power_control flag for dcn32Ian Chen
Add flag skip_implict_edp_power_control check in function dcn32_disable_link_output to fix DCN35 issue. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: add seamless pipe topology transition checkWenjing Liu
[why] We have a few cases where we need to perform update topology update in dc update interface. However some of the updates are not seamless This could cause user noticible glitches. To enforce seamless transition we are adding a checking condition and error logging so the corruption as result of non seamless transition can be easily spotted. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: Fix MST recognizes connected displays as oneMuhammad Ahmed
[What] MST now recognizes both connected displays Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: Add check for vrr_active_fixedAustin Zheng
Why: vrr_active_fixed should also be checked when determining if DRR is in use How: Add check for vrr_active_fixed when allow_freesync and vrr_active_variable are also checked Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: do not attempt ODM power optimization if minimal transition ↵Wenjing Liu
doesn't exist [why] In some cases such as 8k desktop surface with 144Hz timing, we decide to enable ODM power optimization but this surface doesn't have a minimum transition state. Therefore we cannot switch off ODM power optimization seamlessly This creates path depedency on ODM power optimization decision. i.e whether or not we should switch off ODM power optimization is dependent on if the transition to switch off ODM power optimization from current state is seamless. We don't desire a path dependent power optimization policy as it is too dynamic and difficult to maintain. [how] Attempt ODM power optimization only after we can validate new state without using pipe combine. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: remove a function that does complex calculation in every ↵Wenjing Liu
frame but not used [why] The result of predict_pipe_split calculation is no longer used but the function is not removed. This will cause unnecessary calculation of pipe split prediction in every frame update. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: Add DCHUBBUB callback to report MALL statusAurabindo Pillai
[Why&How] For enabling automated testing, add a hook to DCHUBBUB interface so that mall status can be queried by userspace through debugfs. This removes dependence on requiring a userspace tool like UMR for querying status for MALL static screen IGT test. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: Blank phantom OTG before enablingAlvin Lee
[Description] Before enabling the phantom OTG for an update we must enable DPG to avoid underflow. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Update DCN32 for DCN35 supportQingqing Zhuo
[Why & How] Update DCN32 files for DCN35 usage. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add debugfs interface for ODM combine infoAurabindo Pillai
[Why] For use with IGT tests in userspace, the number of ODM segments in use is required to be exposed to userspace to verify that ODM Combine is working as expected when special timings are committed. [How] Add a connector specific debugfs entry that prints the number of ODM segments in use. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: switch to new ODM policy for windowed MPO ODM supportWenjing Liu
We need to align windowed MPO ODM support on DCN3x with new ODM policy. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add more pipe resource interfacesWenjing Liu
Redesign pipe resource interfaces in resource.h file. The new interface design addresses the issue with lack of pipe topology encapsulation and lack of pipe accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add new resource interface for acquiring sec opp heads and ↵Wenjing Liu
release pipe [why] We need a new algorithm for acquiring secondary opp heads for ODM combine in dcn32 and a release pipe interface to properly release pipe resources. [how] add two new interfaces in DCN specific resource file. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add support for 1080p SubVP to reduce idle powerEthan Bitnun
- Override the det to adjust microschedule timings allow for 1080p configs with SubVP - To lower unnecessary risk, we prevent multi 1080p configs from using SubVP, as multi 1080p already has low idle power. - Count the number of streams to verify that we are in a SubVP config before overriding Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30Partially revert "drm/amd/display: update add plane to context logic with a ↵Wenjing Liu
new algorithm" This partially reverts commit 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm"). The new secondary pipe allocation logic triggers an issue with a specific hardware state transition and causes a frame of corruption when toggling between windowed MPO and ODM desktop only mode. Ideally hwss is supposed to handle this scenario. We are temporarily reverting the logic and investigate the root cause why this transition would cause corruptions. Fixes: 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm") Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: fix static screen detection settingSungHuai Wang
[WHY] OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3, but we still follow DCN2 to apply setting for OTG_STATIC_SCREEN_EVENT_MASK. [How] Add new function to apply correct settings for DCN3 series. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: SungHuai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: implement pipe type definition and adding accessorsWenjing Liu
[why] There is a lack of encapsulation of pipe connection representation in pipe context. This has caused many challenging bugs and coding errors with repeated logic to identify the same pipe type. [how] Formally define pipe types and provide getters to identify a pipe type and find a pipe based on specific requirements. Update existing logic in non dcn specific files and dcn32 and future versions to use the new accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: disable clock gating logic reversed bug fixMuhammad Ahmed
[Why] disable clock gating logic reversed bug fix Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: rename acquire_idle_pipe_for_layer to ↵Wenjing Liu
acquire_free_pipe_as_sec_dpp_pipe [why] Secondary DPP pipes are used for rendering secondary layers of planes. The name "for layer" doesn't make it obvious. The function is acquiring a free pipe as secondary dpp pipe only. We rename it so it is more obvious. In a future follow up change, we want to add functions to acquire free pipe as opp head pipe or otg master pipe as well. They will have their separate allocation priority. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: move idle pipe allocation logic into dcn specific layerWenjing Liu
[why] generic dc resource file should not know what an optimal idle pipe is because this is dcn hardware dependent. [how] We move the optimial pipe searching logic in dcn specific layer. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: update add plane to context logic with a new algorithmWenjing Liu
[why] Preivous algorithm for finding an optimal idle pipe for a new plane was implemented to handle dynamic pipe allocation when MPO plane moves from one ODM slice to the other. Now pipe allocation is more static so it no longer depends on the MPO plane's position. We are simplifying our logic and remove unnecessary handling in our code. [how] Apply a new simplified version of pipe resource allocation logic to reduce unnecessary flip delay caused by swapping secondary dpp pipe to other MPC blending tree. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Use DTBCLK as refclk instead of DPREFCLKAustin Zheng
[Why] Flash of corruption observed when UCLK switching after transitioning from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config Scenario where DPREFCLK is required instead of DTBCLK is not expected [How] Always set the DTBCLK source as DTBCLK0 Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Make mpc32 functions available to future DCNsWesley Chalmers
Make the mpc32 functions available for future DCNs to use Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0Alvin Lee
[Description] It is not valid to set the WDIVIDER value to 0, so do not re-write to DISPCLK_WDIVIDER if the current value is 0 (i.e., it is at it's initial value and we have not made any requests to change DISPCLK yet). Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-21drm/amd/display: remove an unused fileAurabindo Pillai
[Why&How] Internal subvp state is not referenced in driver code, so it can be removed. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Initialize necessary uninitialized variablesMeera Patel
This commit initializes uninitialized variables. For some compilers uninitialized variable warnings are treated as Error. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Meera Patel <meera.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: add additional refresh rate conditions for SubVP casesSamson Tam
[Why] Want to further constrain these refresh rate conditions for SubVP: - SubVP + SubVP: either both <= 120Hz or both between 120-165Hz - SubVP + DRR: SubVP <= 120Hz - SubVP + VBlank: SubVP <= 120Hz [How] Add constraints in subvp_subvp_admissable(), dcn32_subvp_drr_admissable() and dcn32_subvp_vblank_admissable() Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Create debugging mechanism for Gaming FAMSGianna Binder
[WHY] To enable FAMS even during gaming sessions. [HOW] By leveraging a new dc.debug parameter. Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Gianna Binder <gianna.binder@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Remove Phantom Pipe Check When Calculating K1 and K2Austin Zheng
[Why] K1 and K2 not being setting properly when subVP is active. [How] Have phantom pipes use the same programing as the main pipes without checking the paired stream Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Fix the delta clamping for shaper LUTHarry Wentland
The shaper LUT requires a 10-bit value of the delta between segments. We were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we want it to do. It will preserve 10-bit precision after the decimal point, but that's not quite what we want. We want 14-bit precision and discard the 4 most-significant bytes. To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: Enable dc mode clock switching for DCN32xAlvin Lee
- DC mode clock switch interface was previously only executed for DCN303. Enable it for DCN32x so that the interface is called correctly - Assign function pointers for DCN32x that are used in the dc mode interface - Update the dc mode interface to work generically for each ASIC - In update_clocks, make sure to consider softmax if we're in DC mode Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: fix odm k2 div calculationDmytro Laktyushkin
Correct setting is div by 2 for odm. Seamless odm transitions are enabled with enable_dp_dig_pixel_rate_div_policy debug flag. Fixes: a2c7356f526d ("drm/amd/display: fix pixel rate update sequence") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: enable the new fast update path for supported ASICsAlvin Lee
The new fast update sequence is now supported on some ASICs. So, enable it by default for all applicable ASICs. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Correct kdoc formats in dcn32_resource_helpers.cSrinivasan Shanmugam
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'dc' not described in 'dcn32_determine_det_override' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'context' not described in 'dcn32_determine_det_override' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'pipes' not described in 'dcn32_determine_det_override' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:624: warning: Cannot understand * ***************************************************************** drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:676: warning: Cannot understand * ***************************************************************** Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Stylon Wang <stylon.wang@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Provide function name for 'optc32_enable_crtc()'Srinivasan Shanmugam
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:109: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Enable CRTC Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: fix pixel rate update sequenceDmytro Laktyushkin
The k1/k2 pixel rate dividers in dccg should only be updated on stream enable and do not actually depend on whether odm combine is active. This removes an on flip update of these and fixes the calculate function to ignore odm status for dp steams. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15Revert "drm/amd/display: reallocate DET for dual displays with high pixel ↵Samson Tam
rate ratio" Revert commit 5f3401eeb064 ("drm/amd/display: reallocate DET for dual displays with high pixel rate ratio") [Why] Previously had modified DET allocation algorithm to allocate less DET segments for lower pixel rate display and more DET segments for higher pixel rate display. But noticed it is causing underflow when higher pixel rate display is not displaying at higher mode [How] Roll back change Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Limit Minimum FreeSync Refresh RateAustin Zheng
Why: Some EDIDs report a minimum refresh rate lower than what HW can support How: Add a check to calculate minimum supported refresh rate with current timing and use that as the minimum if a lower one is passed in Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Block SubVP + DRR if the DRR is PSR capableAlvin Lee
[Description] PSR implementation in FW has inline polling which can poll for up to 1ms. This will interfere with SubVP because SubVP is timing sensitive and can't tolerate up to 1ms worth of delay before handling vertical or VLINE interrupts. Therefore block SubVP + DRR cases if DRR is PSR capable Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Do not disable phantom pipes in driverSaaem Rizvi
[Why and How] We should not disable phantom pipes in this sequence, as this should be controlled by FW. Furthermore, the previous programming sequence would have enabled the phantom pipe in driver as well, causing corruption. This change should avoid this from occuring. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Re-enable SubVP high refreshAlvin Lee
Re-enable SubVP high refresh now that it is fixed for displays with high refresh rates. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: SubVP high refresh only if all displays >= 120hzAlvin Lee
[Description] - SubVP high refresh should only be enabled if all displays are >= 120hz. We do not want to accidentally enables configs such as 60hz[SubVP] + 120hz[SubVP] - Ensure that the SubVP config generation code does not produce configs such as 60hz[SubVP] + 120hz[SubVP] - Also add admissibility checks to ensure these configs do not pass as valid configs Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Only use ODM2:1 policy for high pixel rate displaysAurabindo Pillai
We only gain a benefit of using the ODM2:1 dynamic policy if it allow us to decrease DISPCLK to use the VMIN freq. If the display config can already achieve VMIN DISPCLK freq without ODM2:1, don't apply the policy. This patch was reverted but that causes some IGT regressions. To unblock, the patch is being applied again until IGT failures are fixed. Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2023-06-09drm/amd/display: Wrong index type for pipe iteratorSaaem Rizvi
[Why and How] Type mismatch in index and pipe count might cause an infinite loop. code Change should resolve this issue. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Refactor fast update to use new HWSS build sequenceAlvin Lee
[Description] - Refactor HW sequencer to use a build / execute sequence - Also move gamma updates to become fast v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'") Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-08-01 23:47:50 +0000