summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2019-10-28dc.c:use kzalloc without testzhongshiqi
dc.c:583:null check is needed after using kzalloc function Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: zhongshiqi <zhong.shiqi@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-28drm/amd/display: remove gcc warning Wunused-but-set-variableChenwandun
drivers/gpu/drm/amd/display/dc/dce/dce_aux.c: In function dce_aux_configure_timeout: drivers/gpu/drm/amd/display/dc/dce/dce_aux.c: warning: variable timeout set but not used [-Wunused-but-set-variable] Signed-off-by: Chenwandun <chenwandun@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amdgpu: Add DC feature mask to disable fractional pwmLeo Li
[Why] Some LED panel drivers might not like fractional PWM. In such cases, backlight flickering may be observed. [How] Add a DC feature mask to disable fractional PWM, and associate it with the preexisting dc_config flag. The flag is only plumbed through the dmcu firmware, so plumb it through the driver path as well. To disable, add the following to the linux cmdline: amdgpu.dcfeaturemask=0x4 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204957 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Lukáš Krejčí <lskrejci@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Change Navi14's DWB flag to 1Zhan liu
[Why] DWB (Display Writeback) flag needs to be enabled as 1, or system will throw out a few warnings when creating dcn20 resource pool. Also, Navi14's dwb setting needs to match Navi10's, which has already been set to 1. [How] Change value of num_dwb from 0 to 1. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amdgpu/display: add dc feature mask for psr enablementRoman Li
[Why] Adding psr mask to dc features allows selectively disable/enable psr. Current psr implementation may not work with non-pageflipping application. Until resolved it should be disabled by default. [How] Add dcfeaturemask for psr enablement. Disable by default. To enable set amdgpu.dcfeaturemask=0x8 in grub kernel command line. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/powerplay: clear the swSMU code layerEvan Quan
With this cleanup, the APIs from amdgpu_smu.c will map to ASIC specific ones directly. Those can be shared around all SMU V11/V12 ASICs will be put in smu_v11_0.c and smu_v12_0.c respectively. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/powerplay: add lock protection for swSMU APIs V2Evan Quan
This is a quick and low risk fix. Those APIs which are exposed to other IPs or to support sysfs/hwmon interfaces or DAL will have lock protection. Meanwhile no lock protection is enforced for swSMU internal used APIs. Future optimization is needed. V2: strip the lock protection for all swSMU internal APIs Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Feifei Xu <Feifei.Xu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Apply vactive dram clock change workaround to dcn2 DMLv2Joshua Aberback
[Why] This workaround was put in dcn2 DMLv1, and now we need it in DMLv2. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: fix hubbub deadline programingEric Yang
[Why] Fix the programming of DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_A. Was not filled in. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: fix avoid_split for dcn2+ validationDmytro Laktyushkin
We are currently incorrectly processing avoid split at highest voltage level. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Do not call update bounding box on dc createSung Lee
[Why] In Hybrid Graphics, dcn2_1_soc struct stays alive through PnP. This causes an issue on dc init where dcn2_1_soc which has been updated by update_bw_bounding_box gets put into dml->soc. As update_bw_bounding_box is currently incorrect for dcn2.1, this makes dml calculations fail due to incorrect parameters, leading to a crash on PnP. [How] Comment out update_bw_bounding_box call for now. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Add center mode for integer scaling in DCReza Amini
[why] We want to use maximum space on display to show source [how] For Centered Mode: Replicate source as many times as possible to use maximum of display active space add borders. Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: take signal type from linkLewis Huang
[Why] Signal is update to EDP when driver disable first encoder. The following encoder using SIGNAL_TYPE_EDP to handle other device. When encoder signal is HDMI, driver will detect it is dp and release phy. It cause hw hang. [How] Take signal type from link->connector_signal. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: 3.2.56Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Make clk mgr the only dto update pointNoah Abradjian
[Why] * Clk Mgr DTO update point did not cover all needed updates, as it included a check for plane_state which does not exist yet when the updater is called on driver startup * This resulted in another update path in the pipe programming sequence, based on a dppclk update flag * However, this alternate path allowed for stray DTO updates, some of which would occur in the wrong order during dppclk lowering and cause underflow [How] * Remove plane_state check and use of plane_res.dpp->inst, getting rid of sequence dependencies (this results in extra dto programming for unused pipes but that doesn't cause issues and is a small cost) * Allow DTOs to be updated even if global clock is equal, to account for edge case exposed by diags tests * Remove update_dpp_dto call in pipe programming sequence (leave update to dppclk_control there, as that update is necessary and shouldn't occur in clk mgr) * Remove call to optimize_bandwidth when committing state, as it is not needed and resulted in sporadic underflows even with other fixes in place Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Only use EETF when maxCL > max displayKrunoslav Kovac
[Why&How] BT.2390 EETF is used for tone mapping/range reduction. Say display is 0.1 - 500 nits. The problematic case is when content is 0-400. We apply EETF because 0<0.1 so we need to reduce the range by 0.1. In the commit, we ignore the bottom range. Most displays map 0 to min and then have a ramp to 0.1, so sending 0.1 is actually >0.1. Furthermode, HW that uses 3D LUT also assumes min=0. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: move wm ranges reporting to end of init hwEric Yang
[Why] SMU does not keep the wm table across S3, S4, need to re-send the table. Also defer sending the cable to after DCN bave initialized [How] Send table at end of init hw Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: do not synchronize "drr" displaysJun Lei
[why] A display that supports DRR can never really be considered "synchronized" with any other display because we can dynamically enable DRR (i.e. without modeset). this will cause their relative CRTC positions to drift and lose sync. this will disrupt features such as MCLK switching that assume and depend on their permanent alignment (that can only change with modeset) [how] check for ignore_msa in stream when considered synchronizability this ignore_msa is basically actually implemented as "supports drr" Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Proper return of result when aux engine acquire failsAnthony Koo
[Why] When aux engine acquire fails, we missed populating the operation_result that describes the failure reason. [How] Set operation_result to new type: AUX_CHANNEL_OPERATION_FAILED_ENGINE_ACQUIRE in the case aux engine acquire has failed. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Disable force_single_disp_pipe_split on DCN2+Michael Strauss
[WHY] force_single_disp_pipe_split is a debug flag for use on DCN1 but isn't necessary otherwise as DCN2+ splits by default Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Passive DP->HDMI dongle detection fixMichael Strauss
[WHY] i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles The call is expected to fail in DVI-D case but pass in HDMI case Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D [HOW] Retry i2c_read to ensure failed result is valid Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: map TRANSMITTER_UNIPHY_x to LINK_REGS_xYogesh Mohan Marimuthu
[Why] The enum value for TRANSMITTER_UNIPHY_G is 9. In resource dc_xx_resource file structure link_enc_regs[], the TRANSMITTER_UNIPHY_G registers are initialized at index 6. Due to this mismatch, if monitor is attached to port using TRANSMITTER_UNIPHY_G then the monitor blanks out. [How] add function map_transmitter_id_to_phy_instance() and use the function to map enum transmitter to link regs. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: add flag to allow diag to force enumerate edpJun Lei
[why] SLT tests require that diag can drive eDP even if nothing is connected, this is not typical production use case, so we need to add flag [how] add flag, and this flag supercedes "should destroy" logic Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: add embedded flag to dmlDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: fix number of dcn21 dpm clock levelsDmytro Laktyushkin
These are specific to dcn21 and should not be increased for reuse on other asics. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: enable vm by default for rn.Yongqiang Sun
[Why & How] vm should be enabled by default for rn to get right dml. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Allow inverted gammaAidan Yang
[why] There's a use case for inverted gamma and it's been confirmed that negative slopes are ok. [how] Remove code for blocking non-monotonically increasing gamma Signed-off-by: Aidan Yang <Aidan.Yang@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Reza Amini <Reza.Amini@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Update min dcfclkAlvin Lee
[Why] NV12 has lower min dcfclk [How] Add update in update_bounding_box Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: audio endpoint cannot switchPaul Hsieh
[Why] On some systems, we need to check the dcn version in runtime system, not in compile time. [How] Stub in dcn version parameter to find_first_free_audio Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Fix MPO & pipe split on 3-pipe dcn2xMichael Strauss
[WHY] DML is incorrectly initialized with 4 pipes on 3 pipe configs RequiredDPPCLK is halved on unsplit pipe due to an incorrectly handled 3 pipe case, causing underflow with 2 planes & pipe split (MPO, 8K + 2nd display) [HOW] Set correct number of DPP/OTGs for dml init to generate correct DPP topology Double RequiredDPPCLK after clock is halved for pipe split and find_secondary_pipe fails to fix underflow Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: remove unnecessary assertDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: move dispclk vco freq to clk mgr baseDmytro Laktyushkin
This value will be needed by dml and therefore should be externally accessible. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: correctly initialize dml odm variablesDmytro Laktyushkin
One of odm variables was not initialized in dml. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: split dcn20 fast validate into more functionsDmytro Laktyushkin
Split a large function into smaller, reusable chunks. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: correctly populate dpp refclk in fpgaAnthony Koo
[Why] In diags environment we are not programming the DPP DTO correctly. [How] Populate the dpp refclk in dccg so it can be used to correctly program DPP DTO. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Enable PSRRoman Li
[Why] PSR (Panel Self-Refresh) is a power-saving feature for eDP panels. The feature has support in DMCU (Display MicroController Unit). DMCU/driver communication is implemented in DC. DM can use existing DC PSR interface to use PSR feature. [How] - Read psr caps via dpcd - Send vsc infoframe if panel supports psr - Disable psr before h/w programming (FULL_UPDATE) - Enable psr after h/w programming - Disable psr for fb console Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Add debugfs entry for reading psr stateRoman Li
[Why] For upcoming PSR stupport it's useful to have debug entry to verify psr state. [How] - Enable psr dc api for Linux - Add psr_state file to eDP connector debugfs usage e.g.: cat /sys/kernel/debug/dri/0/DP-1/psr_state Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: 3.2.55Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: remove unused codeDmytro Laktyushkin
Commit hints are unnecessary after front end programming redesign. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Remove superfluous assertJordan Lazare
[Why] For loop below the assert already checks for the number of instances to create. ASSERT is meaningless and causing spam. [How] dd Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Don't use optimized gamma22 with eetfAidan Yang
[why] Optimized gamma22 assumes fixed point distribution which is not true for eetf true. [how] Use long calculation for eetf. Signed-off-by: Aidan Yang <Aidan.Yang@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Reza Amini <Reza.Amini@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Add unknown clk state.Yongqiang Sun
[Why] System hang during S0i3 if DP only connected due to clk is disabled when doing link training. During S0i3, clk is disabled while the clk state is updated when ini_hw called, and at the moment clk is still disabled which indicating a wrong state for next time trying to enable clk. [How] Add an unknown state and initialize it during int_hw, make sure enable clk command be sent to smu. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: add odm visual confirmJun Lei
[why] Hard to determine if pipe combine is done with MPC or ODM [how] Add new visual confirm type, this will mark each MPCC tree with a different color Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: add 50us buffer as WA for pstate switch in activeJun Lei
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Avoid sending abnormal VSIFWayne Lin
[Why] While setting hdmi_vic, hv_frame.vic is not initialized and might assign a wrong value to hdmi_vic. Cause to send out VSIF with abnormal value. [How] Initialize hv_frame and avi_frame Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Free gamma after calculating legacy transfer functionNicholas Kazlauskas
[Why] We're leaking memory by not freeing the gamma used to calculate the transfer function for legacy gamma. [How] Release the gamma after we're done with it. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: setting the DIG_MODE to the correct value.Zhan liu
[Why] This patch is for fixing Navi14 HDMI display pink screen issue. [How] Call stream->link->link_enc->funcs->setup twice. This is setting the DIG_MODE to the correct value after having been overridden by the call to transmitter control. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-26Merge tag 'drm-next-5.5-2019-10-09' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.5-2019-10-09: amdgpu: - Additional RAS enablement for vega20 - RAS page retirement and bad page storage in EEPROM - No GPU reset with unrecoverable RAS errors - Reserve vram for page tables rather than trying to evict - Fix issues with GPU reset and xgmi hives - DC i2c over aux fixes - Direct submission for clears, PTE/PDE updates - Improvements to help support recoverable GPU page faults - Silence harmless SAD block messages - Clean up code for creating a bo at a fixed location - Initial DC HDCP support - Lots of documentation fixes - GPU reset for renoir - Add IH clockgating support for soc15 asics - Powerplay improvements - DC MST cleanups - Add support for MSI-X - Misc cleanups and bug fixes amdkfd: - Query KFD device info by asic type rather than pci ids - Add navi14 support - Add renoir support - Add navi12 support - gfx10 trap handler improvements - pasid cleanups - Check against device cgroup ttm: - Return -EBUSY with pipelining with no_gpu_wait radeon: - Silence harmless SAD block messages device_cgroup: - Export devcgroup_check_permission Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010041713.3412-1-alexander.deucher@amd.com
2019-10-25drm/ttm: always keep BOs on the LRUChristian König
This allows blocking for BOs to become available in the memory management. Amdgpu is doing this for quite a while now during CS. Now apply the new behavior to all drivers using TTM. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/332878/
2019-10-24drm/dp_mst: Add basic topology reprobing when resumingLyude Paul
Finally! For a very long time, our MST helpers have had one very annoying issue: They don't know how to reprobe the topology state when coming out of suspend. This means that if a user has a machine connected to an MST topology and decides to suspend their machine, we lose all topology changes that happened during that period. That can be a big problem if the machine was connected to a different topology on the same port before resuming, as we won't bother reprobing any of the ports and likely cause the user's monitors not to come back up as expected. So, we start fixing this by teaching our MST helpers how to reprobe the link addresses of each connected topology when resuming. As it turns out, the behavior that we want here is identical to the behavior we want when initially probing a newly connected MST topology, with a couple of important differences: - We need to be more careful about handling the potential races between events from the MST hub that could change the topology state as we're performing the link address reprobe - We need to be more careful about handling unlikely state changes on ports - such as an input port turning into an output port, something that would be far more likely to happen in situations like the MST hub we're connected to being changed while we're suspend Both of which have been solved by previous commits. That leaves one requirement: - We need to prune any MST ports in our in-memory topology state that were present when suspending, but have not appeared in the post-resume link address response from their parent branch device Which we can now handle in this commit by modifying drm_dp_send_link_address(). We then introduce suspend/resume reprobing by introducing drm_dp_mst_topology_mgr_invalidate_mstb(), which we call in drm_dp_mst_topology_mgr_suspend() to traverse the in-memory topology state to indicate that each mstb needs it's link address resent and PBN resources reprobed. On resume, we start back up &mgr->work and have it reprobe the topology in the same way we would on a hotplug, removing any leftover ports that no longer appear in the topology state. Changes since v4: * Split indenting changes in drm_dp_mst_topology_mgr_resume() into a separate patch * Only fire hotplugs when something has actually changed after a link address probe * Don't try to change port->connector at all on ports, just throw out ports that need their connectors removed to make things easier. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-14-lyude@redhat.com
generated by cgit (git 2.34.1) at 2025-07-28 20:02:30 +0000