summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2024-04-30drm/amd/display: Add periodic detection for IPSRoman Li
[Why] HPD interrupt cannot be handled in IPS2 state. So if there's a display topology change while system in IPS2 it can be missed. [How] Implement worker to check each 5 sec in IPS for HPD. Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Notify idle link detection through shared stateNicholas Kazlauskas
[Why] We can hang in IPS2 checking DMCUB_SCRATCH0 for link detection state. [How] Replace the HW access with a check on the shared state bit. This will work the same way as the SCRATCH0 but won't require a wake in the case where link detection isn't required. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Enable Replay for DCN315Joan Lee
[why & how] Enable Replay for DCN315. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Joan Lee <joan.lee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: use even ODM slice width for two pixels per containerWenjing Liu
[why] When optc uses two pixel per container, each ODM slice width must be an even number. [how] If ODM slice width is odd number increase it by 1. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Fix FEC_READY write on DP LTIlya Bakoulin
[Why/How] We can miss writing FEC_READY in some cases before LT start, which violates DP spec. Remove the condition guarding the DPCD write so that the write happens unconditionally. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: For FPO + Vactive check that all pipes support VAAlvin Lee
[Description] For FPO + Vactive scenarios we must check that all non-FPO pipes have VACTIVE margin to allow it. The previous check only confirmed that there is at least one pipe that has vactive margin, but this is incorrect as the vactive display could be using two pipes (MPO) where the desktop plane has vactive margin, and the video plane does not. Reviewed-by: Samson Tam <samson.tam@amd.com> Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: gpuvm handling in DML21Nevenko Stupar
[Why & How] Currently in DML2.1 gpuvm_enable was hardcoded. Use passed info from DC for DML21 to be in sync with what is used in DC. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Assign linear_pitch_alignment even for VMAlvin Lee
[Description] Assign linear_pitch_alignment so we don't cause a divide by 0 error in VM environments Reviewed-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Refactor HUBBUB into component folderRevalla Hari Krishna
[why] cleaning up the code refactor requires hubbub to be in its own component. [how] Move all files under newly created hubbub folder and fix the makefiles. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Only program P-State force if pipe config changedAlvin Lee
[Description] Today for MED update type we do not call update clocks. However, for FPO the assumption is that update clocks should be called to disable P-State switch before any HW programming since FPO in FW and driver are not synchronized. This causes an issue where on a MED update, an FPO P-State switch could be taking place, then driver forces P-State disallow in the below code and prevents FPO from completing the sequence. In this case we add a check to avoid re-programming (and thus re-setting) the P-State force register by only reprogramming if the pipe was not previously Subvp or FPO. The assumption is that the P-State force register should be programmed correctly the first time SubVP / FPO was enabled, so there's no need to update / reset it if the pipe config has never exited SubVP / FPO. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Revert "dc: Keep VBios pixel rate div setting util next ↵Webb Chen
mode set" This reverts commit 4d4d3ff16db2 ("drm/amd/display: Keep VBios pixel rate div setting util next mode set") which causes issue. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Webb Chen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Enable RCO for PHYSYMCLK in DCN35Daniel Miess
[Why & How] Enable root clock optimization for PHYSYMCLK and only disable it when it's actively being used v2: Fix array-index-out-of-bounds in dcn35_calc_blocks_to_gate Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add trigger FIFO resync path for DCN35Nicholas Kazlauskas
[Why] FIFO error can occur if we don't trigger a DISPCLK change after touching K1/K2 dividers. For 4k144 eDP + hotplug of USB-C DP display we see FIFO underflow. [How] We have the path to trigger the resync as the workaround in DCN314/DCN32, it just needs to be ported over to DCN35. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Re-enable IPS2 for static screenRoman Li
[Why] IPS stability was fixed in bios. [How] Set disable_ips init flag to DMUB_IPS_ENABLE. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: take ODM slice count into account when deciding DSC sliceWenjing Liu
[why] DSC slice must be divisible by ODM slice count. [how] If DSC slice count is not a multiple of ODM slice count, increase DSC slice until it is. Otherwise fail to compute DSC configuration. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Fix DC mode screen flickering on DCN321Leo Ma
[Why && How] Screen flickering saw on 4K@60 eDP with high refresh rate external monitor when booting up in DC mode. DC Mode Capping is disabled which caused wrong UCLK being used. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Defer handling mst up request in resumeWayne Lin
[Why] Like commit ec5fa9fcdeca ("drm/amd/display: Adjust the MST resume flow"), we want to avoid handling mst topology changes before restoring the old state. If we enable DP_UP_REQ_EN before calling drm_atomic_helper_resume(), have changce to handle CSN event first and fire hotplug event before restoring the cached state. [How] Disable mst branch sending up request event before we restoring the cached state. DP_UP_REQ_EN will be set later when we call drm_dp_mst_topology_mgr_resume(). Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Restrict multi-disp support for in-game FAMSIswara Nagulendran
[HOW&WHY] In multi-monitor cases the VBLANK stretch that is required to align both monitors may be so large that it may create issues for gaming performance. Use debug value to restrict in-game FAMS support for multi-disp use case. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Refactor for Replay Link off frame countDennis Chan
[why] To refine for link off frame count in diagnose tool, the driver show the link off frame count number instead of showing link off frame count level. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Handle the case which quad_part is equal 0Rodrigo Siqueira
Add code to handle case when quad_part is 0 in gpu_addr_to_uma(). Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add log_color_state callback to multiple DCNsRodrigo Siqueira
Set up to enable log color state for multiple DCNs. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Remove legacy code in DCRodrigo Siqueira
This commit just remove some trivial legacy code in some of the DC files. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Update some of the dcn303 parametersRodrigo Siqueira
Adjust to update some of the dcn303 parameters. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Enable legacy fast update for dcn301Rodrigo Siqueira
Set up to enable legacy fast update. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Adjust functions prefix for some of the dcn301 fpu functionsRodrigo Siqueira
Add dcn301_fpu prefix to some of the FPU function with the required adjustments. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add VCO speed parameter for DCN31 FPURodrigo Siqueira
Add VCO speed parameters in the bounding box array. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Remove unnecessary filesWayne Lin
[Why & How] We accidentally upstream unnecessary files. Remove them. Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Adjust codestyle for dcn31 and hdcp_msgRodrigo Siqueira
This commit just update the code style in two if conditions and in an static array. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add missing SMU versionRodrigo Siqueira
This commit add PP_SMU_VER_VG to the pp_smu_ver list. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Improve registers writeRodrigo Siqueira
Add REG_SEQ_SUBMIT and REG_SEQ_WAIT_DONE to optimize the burst write for the regama lut. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Always use legacy way of setting cursor on DCEHarry Wentland
Some IGT tests fail with the new atomic cursor updates when running on older DCE-based ASICs. To work around these issues keep calling the amdgpu_dm_commit_cursors for each cursor update on DCE, even if those cursor updates coincide with other plane updates. Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Do cursor programming with rest of pipeHarry Wentland
Cursors are always programmed independently of updates on other planes. When atomic commits program cursor and surface updates together the cursor update might be locked out by the surface update and not take effect. To combat this program cursor and surface updates together via dc_update_planes_and_stream to ensure they can be applied atomically. When cursor updates come on their own use the old method to program the cursor as dc_update_planes_and_stream isn't handling this case correctly (yet), leading to a flickering screen. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2186 Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: 3.2.282Aric Cyr
Summary: * Changes across DSC, MST, DMCUB, Panel Replay and misc fixes. * Fixes to cursor programming sequence * Add some missing register defs * Formatting/Sytle fixes Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: [FW Promotion] Release 0.0.214.0Anthony Koo
- Adjust the dmub_fw_boot_options reserved bits to be correct Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Replace uint8_t with u8 for dp_hdmi_dongle_signature_strRodrigo Siqueira
The string dp_hdmi_dongle_signature_str already uses u8 but the string dp_hdmi_dongle_signature_str does not. Just replace uint8_t with u8 for dp_hdmi_dongle_signature_str. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Update dcn351 debug flags and function pointersSung Joon Kim
[why & how] There are potential issues with Z8 and IPS that need to be addressed and need to add in missing function pointers. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Keep VBios pixel rate div setting util next mode setWebb Chen
[why] VBios & Driver may have differnet pixel rate div policy. If the policy is not same and fast boot is enabled, it would cause the pixel rate is too high after driver only performs stream blank & unblank. [how] We would keep pixel rate div setting by VBios until next mode set. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Webb Chen <yi-lchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Disable error correction if it's not supportedCruise
[Why] Error correction was enabled in a monitor which doesn't support. [How] Disable error correction if it's not supported Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Cruise <cruise.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Fix recout calculation for stereo side-by-sideSung Joon Kim
[why & how] The recout x offset was incorrect which led to wrong viewport calculation. For stereo side-by-side case, the slice index should be 0 for both split pipes. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Set cursor attributes before positionHarry Wentland
HWSS set_cursor_attributes copies the stream's cursor attributes to the hubp cursor attributes. set_cursor_position might attempt to program the cursor attributes but will program them wrong if they're not set correctly. We need to call HWSS set_cursor_attributes first to ensure hubp has the right attributes to be programmed. Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Separate setting and programming of cursorHarry Wentland
We're seeing issues when user-space tries to do an atomic update of the primary surface, as well as the cursor. These two updates are separate calls into DC and don't currently act as an atomic update. This might lead to cursor updates being locked out and cursors stuttering. In order to solve this problem we want to separate the setting and programming of cursor attributes and position. That's what we're doing in this patch. The subsequent patch will then be able to use the cursor setters in independent cursor updates, as well as in atomic commits. Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30Revert "drm/amd/display: Fix incorrect pointer assignment"Joshua Aberback
This reverts commit 0a571e8657c40047e6602466abfcb6514a391041. [Why] The change being reverted incorrectly assumes that a pointer type was intended, however copying to a new structure is correct. As well, there is no compiler error, it was instead an error in the testing framework being used. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add condition for dp_set_dsc_config callIlya Bakoulin
Not every ASIC implements dp_set_dsc_config. Add condition to prevent calls to unimplemented function. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Allocate zero bw after bw alloc enableMeenakshikumar Somasundaram
[Why] During DP tunnel creation, CM preallocates BW and reduces estimated BW of other DPIA. CM release preallocation only when allocation is complete. Display mode validation logic validates timings based on bw available per host router. In multi display setup, this causes bw allocation failure when allocation greater than estimated bw. [How] Do zero alloc to make the CM to release preallocation and update estimated BW correctly for all DPIAs per host router. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Fix incorrect DSC instance for MSTHersen Wu
[Why] DSC debugfs, such as dp_dsc_clock_en_read, use aconnector->dc_link to find pipe_ctx for display. Displays connected to MST hub share the same dc_link. DSC instance is from pipe_ctx. This causes incorrect DSC instance for display connected to MST hub. [How] Add aconnector->sink check to find pipe_ctx. CC: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Force flush after write to IPS driver signalsNicholas Kazlauskas
[Why] It's possible that the write hasn't fully completed by the time we send (and flush) a command to DMCUB to notify idle to request IPS2 exit. [How] Perform a readback of the volatile structure into dc_dmub_srv state. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Block FPO According to Luminance DeltaEthan Bitnun
[Description] - Block FPO if the max stretch refresh rate is low enough to cause a flicker by storing the maximum safe refresh decrease from nominal in stream. - Brought over various Freesync Luminance functions to dc. Use these new functions to block fpo if we will flicker. - Generalized increase/reduce dependent functions to reduce code clutter and allow for easier use. - Added a debug option to enable the feature. Disabled by default. Co-authored-by: Ethan Bitnun <etbitnun@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ethan Bitnun <etbitnun@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Skip SST ACT polling when sink_count is 0George Shen
[Why] Upon disconnecting a UHBR SST display, the disconnection and the SetTimings to disable the display can occur such that link_set_dpms_off occurs after the disconnection has already processed (link->type is dc_connection_none). Thus, the AUX related operations should be skipped when clearing the payload allocation table. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Atom Integrated System Info v2_2 for DCN35Gabe Teeger
New request from KMD/VBIOS in order to support new UMA carveout model. This fixes a null dereference from accessing Ctx->dc_bios->integrated_info while it was NULL. DAL parses through the BIOS and extracts the necessary integrated_info but was missing a case for the new BIOS version 2.3. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Add delay to improve LTTPR UHBR interopMichael Strauss
[WHY] Avoid race condition which puts LTTPR into bad state during UHBR LT. [HOW] Delay 30ms between starting UHBR TPS1 PHY output and sending TPS1 via DPCD. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-04-27 07:11:55 +0000