summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-05-05drm/amd/display: [FW Promotion] Release 0.1.8.0Taimur Hassan
Undefined unnecessary definition to avoid wrong referring Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: disable DPP RCG before DPP CLK enableCharlene Liu
[why] DPP CLK enable needs to disable DPPCLK RCG first. The DPPCLK_en in dccg should always be enabled when the corresponding pipe is enabled. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: more liberal vmin/vmax update for freesyncAurabindo Pillai
[Why] FAMS2 expects vmin/vmax to be updated in the case when freesync is off, but supported. But we only update it when freesync is enabled. [How] Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called irrespective of whether freesync is enabled. If freesync is supported, then there is no harm in updating vmin/vmax registers. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546 Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: allow dscclk disableCharlene Liu
[why] when dscclk rcg disabled from usr reg option, dsc clock will remain enabled because driver was doing two things both dscclk and dsc rcg in the same routine. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05Revert "drm/amd/display: Refactor SubVP cursor limiting logic"Ryan Seto
This reverts commit 19e743f0fb73 ("drm/amd/display: Refactor SubVP cursor limiting logic") Reason for revert: Corruption Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Prepare for Fused I2C-over-AUXDominik Kaszewski
[Why] Passive DP-HDMI dongles use I2C-over-AUX protocol which is currently not supported using HDCP Locality Check FW path. [How] Prepare code for switching to I2C-over-AUX protocol. Passive dongle detection to be added in another commit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Fix invalid context error in dml helperRoman Li
[Why] "BUG: sleeping function called from invalid context" error. after: "drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()" The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag for memory allocation, which shouldn't be used in atomic contexts. The allocation is needed only for using another helper function get_scaler_data_for_plane(). [How] Modify helpers to pass a pointer to scaler_data within existing context, eliminating the need for dynamic memory allocation/deallocation and copying. Fixes: 366e77cd4923 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Remove redundant null checkAlex Hung
[WHY & HOW] The null check for connector was dereferenced previously in the same function and the caller. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Always Scale FlagJesse Agate
[Why & How] When always scale flag is set at the API level, the number of taps should not be overridden to zero in the identity scaling ratio case, and luma scale should not be set to bypass regardless of luma scale ratio Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Jesse Agate <jesse.agate@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Promote DC to 3.2.330Taimur Hassan
Summary * Update IPS checks to properly include all ASICs. * Refactoring DSC enum dsc_bits_per_comp * Fix ACPI edid parsing issue * Update AUX read interval for LTTPR with old sinks * Correct prefetch calculation Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Refactoring DSC enum dsc_bits_per_comp.Bhuvanachandra Pinninti
[Why] Previously the 'dsc_bits_per_comp' enumeration was defined in individual .c files, making it unavailable for other files that may need it. [How] The 'dsc_bits_per_comp' enumeration has been relocated to a common header file. Reviewed-by: Mounika Adhuri <Mounika.Adhuri@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Update IPS sequential_ono requirement checksOvidiu Bunea
[why & how] ASICs that require special RCG/PG programming are determined based on hw_internal_rev. Update these checks to properly include all such ASICs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-01drm/amd/display: Fix slab-use-after-free in hdcpChris Bainbridge
The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector objects without incrementing the kref reference counts. When using a USB-C dock, and the dock is unplugged, the corresponding amdgpu_dm_connector objects are freed, creating dangling pointers in the HDCP code. When the dock is plugged back, the dangling pointers are dereferenced, resulting in a slab-use-after-free: [ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10 [ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233 [ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024 [ 66.776186] Workqueue: events event_property_validate [amdgpu] [ 66.776494] Call Trace: [ 66.776496] <TASK> [ 66.776497] dump_stack_lvl+0x70/0xa0 [ 66.776504] print_report+0x175/0x555 [ 66.776507] ? __virt_addr_valid+0x243/0x450 [ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0 [ 66.776515] kasan_report+0xeb/0x1c0 [ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777121] __asan_report_load4_noabort+0x14/0x20 [ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777342] ? __lock_acquire+0x6b40/0x6b40 [ 66.777347] ? enable_assr+0x250/0x250 [amdgpu] [ 66.777571] process_one_work+0x86b/0x1510 [ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0 [ 66.777578] ? assign_work+0x16b/0x280 [ 66.777580] ? lock_is_held_type+0xa3/0x130 [ 66.777583] worker_thread+0x5c0/0xfa0 [ 66.777587] ? process_one_work+0x1510/0x1510 [ 66.777588] kthread+0x3a2/0x840 [ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777594] ? trace_hardirqs_on+0x4f/0x60 [ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60 [ 66.777599] ? calculate_sigpending+0x77/0xa0 [ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777605] ret_from_fork+0x40/0x90 [ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777609] ret_from_fork_asm+0x11/0x20 [ 66.777614] </TASK> [ 66.777643] Allocated by task 10: [ 66.777646] kasan_save_stack+0x39/0x60 [ 66.777649] kasan_save_track+0x14/0x40 [ 66.777652] kasan_save_alloc_info+0x37/0x50 [ 66.777655] __kasan_kmalloc+0xbb/0xc0 [ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0 [ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu] [ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper] [ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper] [ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper] [ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper] [ 66.777917] process_one_work+0x86b/0x1510 [ 66.777919] worker_thread+0x5c0/0xfa0 [ 66.777922] kthread+0x3a2/0x840 [ 66.777925] ret_from_fork+0x40/0x90 [ 66.777927] ret_from_fork_asm+0x11/0x20 [ 66.777932] Freed by task 1713: [ 66.777935] kasan_save_stack+0x39/0x60 [ 66.777938] kasan_save_track+0x14/0x40 [ 66.777940] kasan_save_free_info+0x3b/0x60 [ 66.777944] __kasan_slab_free+0x52/0x70 [ 66.777946] kfree+0x13f/0x4b0 [ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu] [ 66.778179] drm_connector_free+0x7d/0xb0 [ 66.778184] drm_mode_object_put.part.0+0xee/0x160 [ 66.778188] drm_mode_object_put+0x37/0x50 [ 66.778191] drm_atomic_state_default_clear+0x220/0xd60 [ 66.778194] __drm_atomic_state_free+0x16e/0x2a0 [ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0 [ 66.778200] drm_ioctl_kernel+0x17a/0x310 [ 66.778203] drm_ioctl+0x584/0xd10 [ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu] [ 66.778375] __x64_sys_ioctl+0x139/0x1a0 [ 66.778378] x64_sys_call+0xee7/0xfb0 [ 66.778381] do_syscall_64+0x87/0x140 [ 66.778385] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fix this by properly incrementing and decrementing the reference counts when making and deleting copies of the amdgpu_dm_connector pointers. (Mario: rebase on current code and update fixes tag) Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Fixes: da3fd7ac0bcf3 ("drm/amd/display: Update CP property based on HW query") Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250417215005.37964-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d4673f3c3b3dcb74e36e53cdfc880baa7a87b330) Cc: stable@vger.kernel.org
2025-04-30drm/amd/display: Rename program_timing function for better debuggingAntonio Fernando Silva e Cruz Filho
[WHY] Improve the output when using the ftrace debug feature, making it easier to identify which function is currently being executed. [HOW] Rename the program_timing function to a name that includes the path to the function's file. Signed-off-by: Antonio Fernando Silva e Cruz Filho <fernando.cruz.ctt@gmail.com> Co-developed-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com> Signed-off-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/display: downgrade HDMI infoframe error to one time warningAurabindo Pillai
In certain config, a modeprobe test triggers too many instances of the error related to infoframe. Make it print only once, and also make it a warning. Fixes: 6027cbee1900 ("drm/amd/display: Add error check for avi and vendor infoframe setup function") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Chengjun Yao <Chengjun.Yao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/display: Fix NULL pointer dereference for program_lut_mode in ↵Srinivasan Shanmugam
dcn401_populate_mcm_luts This commit introduces a NULL pointer check for mpc->funcs->program_lut_mode in the dcn401_populate_mcm_luts function. The previous implementation directly called program_lut_mode without validating its existence, which could lead to a NULL pointer dereference. With this change, the function is now only invoked if mpc->funcs->program_lut_mode is not NULL Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:720 dcn401_populate_mcm_luts() error: we previously assumed 'mpc->funcs->program_lut_mode' could be null (see line 701) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c 642 void dcn401_populate_mcm_luts(struct dc *dc, 643 struct pipe_ctx *pipe_ctx, 644 struct dc_cm2_func_luts mcm_luts, 645 bool lut_bank_a) 646 { ... 716 } 717 if (m_lut_params.pwl) { 718 if (mpc->funcs->mcm.populate_lut) 719 mpc->funcs->mcm.populate_lut(mpc, m_lut_params, lut_bank_a, mpcc_id); --> 720 mpc->funcs->program_lut_mode(mpc, MCM_LUT_SHAPER, MCM_LUT_ENABLE, lut_bank_a, mpcc_id); Cc: Yihan Zhu <yihanzhu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Yihan Zhu <yihanzhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/display: Fix slab-use-after-free in hdcpChris Bainbridge
The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector objects without incrementing the kref reference counts. When using a USB-C dock, and the dock is unplugged, the corresponding amdgpu_dm_connector objects are freed, creating dangling pointers in the HDCP code. When the dock is plugged back, the dangling pointers are dereferenced, resulting in a slab-use-after-free: [ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10 [ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233 [ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024 [ 66.776186] Workqueue: events event_property_validate [amdgpu] [ 66.776494] Call Trace: [ 66.776496] <TASK> [ 66.776497] dump_stack_lvl+0x70/0xa0 [ 66.776504] print_report+0x175/0x555 [ 66.776507] ? __virt_addr_valid+0x243/0x450 [ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0 [ 66.776515] kasan_report+0xeb/0x1c0 [ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777121] __asan_report_load4_noabort+0x14/0x20 [ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777342] ? __lock_acquire+0x6b40/0x6b40 [ 66.777347] ? enable_assr+0x250/0x250 [amdgpu] [ 66.777571] process_one_work+0x86b/0x1510 [ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0 [ 66.777578] ? assign_work+0x16b/0x280 [ 66.777580] ? lock_is_held_type+0xa3/0x130 [ 66.777583] worker_thread+0x5c0/0xfa0 [ 66.777587] ? process_one_work+0x1510/0x1510 [ 66.777588] kthread+0x3a2/0x840 [ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777594] ? trace_hardirqs_on+0x4f/0x60 [ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60 [ 66.777599] ? calculate_sigpending+0x77/0xa0 [ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777605] ret_from_fork+0x40/0x90 [ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777609] ret_from_fork_asm+0x11/0x20 [ 66.777614] </TASK> [ 66.777643] Allocated by task 10: [ 66.777646] kasan_save_stack+0x39/0x60 [ 66.777649] kasan_save_track+0x14/0x40 [ 66.777652] kasan_save_alloc_info+0x37/0x50 [ 66.777655] __kasan_kmalloc+0xbb/0xc0 [ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0 [ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu] [ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper] [ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper] [ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper] [ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper] [ 66.777917] process_one_work+0x86b/0x1510 [ 66.777919] worker_thread+0x5c0/0xfa0 [ 66.777922] kthread+0x3a2/0x840 [ 66.777925] ret_from_fork+0x40/0x90 [ 66.777927] ret_from_fork_asm+0x11/0x20 [ 66.777932] Freed by task 1713: [ 66.777935] kasan_save_stack+0x39/0x60 [ 66.777938] kasan_save_track+0x14/0x40 [ 66.777940] kasan_save_free_info+0x3b/0x60 [ 66.777944] __kasan_slab_free+0x52/0x70 [ 66.777946] kfree+0x13f/0x4b0 [ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu] [ 66.778179] drm_connector_free+0x7d/0xb0 [ 66.778184] drm_mode_object_put.part.0+0xee/0x160 [ 66.778188] drm_mode_object_put+0x37/0x50 [ 66.778191] drm_atomic_state_default_clear+0x220/0xd60 [ 66.778194] __drm_atomic_state_free+0x16e/0x2a0 [ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0 [ 66.778200] drm_ioctl_kernel+0x17a/0x310 [ 66.778203] drm_ioctl+0x584/0xd10 [ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu] [ 66.778375] __x64_sys_ioctl+0x139/0x1a0 [ 66.778378] x64_sys_call+0xee7/0xfb0 [ 66.778381] do_syscall_64+0x87/0x140 [ 66.778385] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fix this by properly incrementing and decrementing the reference counts when making and deleting copies of the amdgpu_dm_connector pointers. (Mario: rebase on current code and update fixes tag) Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Fixes: da3fd7ac0bcf3 ("drm/amd/display: Update CP property based on HW query") Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250417215005.37964-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/display: Fix NULL pointer dereferences in dm_update_crtc_state() v2Srinivasan Shanmugam
Added checks for NULL values after retrieving drm_new_conn_state to prevent dereferencing NULL pointers. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10751 dm_update_crtc_state() warn: 'drm_new_conn_state' can also be NULL drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 10672 static int dm_update_crtc_state(struct amdgpu_display_manager *dm, 10673 struct drm_atomic_state *state, 10674 struct drm_crtc *crtc, 10675 struct drm_crtc_state *old_crtc_state, 10676 struct drm_crtc_state *new_crtc_state, 10677 bool enable, 10678 bool *lock_and_validation_needed) 10679 { 10680 struct dm_atomic_state *dm_state = NULL; 10681 struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; 10682 struct dc_stream_state *new_stream; 10683 int ret = 0; 10684 ... 10703 10704 /* TODO This hack should go away */ 10705 if (connector && enable) { 10706 /* Make sure fake sink is created in plug-in scenario */ 10707 drm_new_conn_state = drm_atomic_get_new_connector_state(state, 10708 connector); drm_atomic_get_new_connector_state() can't return error pointers, only NULL. 10709 drm_old_conn_state = drm_atomic_get_old_connector_state(state, 10710 connector); 10711 10712 if (IS_ERR(drm_new_conn_state)) { ^^^^^^^^^^^^^^^^^^ 10713 ret = PTR_ERR_OR_ZERO(drm_new_conn_state); Calling PTR_ERR_OR_ZERO() doesn't make sense. It can't be success. 10714 goto fail; 10715 } 10716 ... 10748 10749 dm_new_crtc_state->abm_level = dm_new_conn_state->abm_level; 10750 --> 10751 ret = fill_hdr_info_packet(drm_new_conn_state, ^^^^^^^^^^^^^^^^^^ Unchecked dereference 10752 &new_stream->hdr_static_metadata); 10753 if (ret) 10754 goto fail; 10755 v2: Modified the NULL pointer check for drm_new_conn_state in the dm_update_crtc_state function to include a warning via WARN_ON and return -EINVAL to indicate an invalid state when the pointer is NULL. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: do not copy invalid CRTC timing infoGergo Koteles
Since b255ce4388e0, it is possible that the CRTC timing information for the preferred mode has not yet been calculated while amdgpu_dm_connector_mode_valid() is running. In this case use the CRTC timing information of the actual mode. Fixes: b255ce4388e0 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()") Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/ Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085 Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 20232192a5044d1f66dcbef0a24de1bb8157738d) Cc: stable@vger.kernel.org
2025-04-22drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFFLeo Li
[Why] Recent findings show negligible power savings between IPS2 and RCG during static desktop. In fact, DCN related clocks are higher when IPS2 is enabled vs RCG. RCG_IN_ACTIVE is also the default policy for another OS supported by DC, and it has faster entry/exit. [How] Remove previous logic that checked for IPS2 support, and just default to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`. Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8f772d79ef39b463ead00ef6f009bebada3a9d49) Cc: stable@vger.kernel.org
2025-04-22drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinksGeorge Shen
[Why/How] LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier may not support this register, assume the mandatory value is programmed by the LTTPR to avoid AUX timeout issues. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1594b60d74959c0680ddf777a74963c98afcdd7e)
2025-04-22drm/amd/display: Fix ACPI edid parsing on some Lenovo systemsMario Limonciello
[Why] The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd block index starts after 255, so it can't be indexed properly. This leads to problems with the display when the EDID is parsed. [How] Change the variable type to 'short' so that larger values can be indexed. Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com> Reported-by: Mark Pearson <mpearson@lenovo.com> Suggested-by: David Ober <dober@lenovo.com> Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a918bb4a90d423ced2976a794f2724c362c1f063) Cc: stable@vger.kernel.org
2025-04-22drm/amd/display: Enable urgent latency adjustment on DCN35Nicholas Susanto
[Why] Urgent latency adjustment was disabled on DCN35 due to issues with P0 enablement on some platforms. Without urgent latency, underflows occur when doing certain high timing configurations. After testing, we found that reenabling urgent latency didn't reintroduce p0 support on multiple platforms. [How] renable urgent latency on DCN35 and setting it to 3000 Mhz. This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <nsusanto@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cd74ce1f0cddffb3f36d0995d0f61e89f0010738)
2025-04-22drm/amd/display: Force full update in gpu resetRoman Li
[Why] While system undergoing gpu reset always do full update to sync the dc state before and after reset. [How] Return true in should_reset_plane() if gpu reset detected Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2ba8619b9a378ad218ad6c2e2ccaee8f531e08de) Cc: stable@vger.kernel.org
2025-04-22drm/amd/display: Fix gpu reset in multidisplay configRoman Li
[Why] The indexing of stream_status in dm_gpureset_commit_state() is incorrect. That leads to asserts in multi-display configuration after gpu reset. [How] Adjust the indexing logic to align stream_status with surface_updates. Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d91bc901398741d317d9b55c59ca949d4bc7394b) Cc: stable@vger.kernel.org
2025-04-22drm/amd/display: Add NULL pointer checks in dm_force_atomic_commit()Srinivasan Shanmugam
This commit updates the dm_force_atomic_commit function to replace the usage of PTR_ERR_OR_ZERO with IS_ERR for checking error states after retrieving the Connector (drm_atomic_get_connector_state), CRTC (drm_atomic_get_crtc_state), and Plane (drm_atomic_get_plane_state) states. The function utilized PTR_ERR_OR_ZERO for error checking. However, this approach is inappropriate in this context because the respective functions do not return NULL; they return pointers that encode errors. This change ensures that error pointers are properly checked using IS_ERR before attempting to dereference. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Remove unused *vbios_smu_set_dprefclkDr. David Alan Gilbert
rn_vbios_smu_set_dprefclk() was added in 2019 by commit 4edb6fc91878 ("drm/amd/display: Add Renoir clock manager") rv1_vbios_smu_set_dprefclk() was also added in 2019 by commit dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific") neither have been used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: do not copy invalid CRTC timing infoGergo Koteles
Since b255ce4388e0, it is possible that the CRTC timing information for the preferred mode has not yet been calculated while amdgpu_dm_connector_mode_valid() is running. In this case use the CRTC timing information of the actual mode. Fixes: b255ce4388e0 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()") Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/ Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085 Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Correct prefetch calculationTungYu Lu
[Why] The minimum value of the dst_y_prefetch_equ was not correct in prefetch calculation whice causes OPTC underflow. [How] Add the min operation of dst_y_prefetch_equ in prefetch calculation for legacy DML. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: TungYu Lu <tungyu.lu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Refactor SubVP cursor limiting logicDillon Varone
[WHY] There are several gaps that can result in SubVP being enabled with incompatible HW cursor sizes, and unjust restrictions to cursor size due to wrong predictions on future usage of SubVP [HOW] - remove "prediction" logic in favor of tagging based on previous SubVP usage - block SubVP if current HW cursor settings are incompatible - provide interface for DM to determine if HW cursor should be disabled due to an attempt to enable SubVP Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Fix pixel rate divider policy for 1 pixel per cycle configMeenakshikumar Somasundaram
[Why] Pixel rate dividor was not programmed correctly for 1 pixel per cycle configuration for empty tu case. [How] Included check for empty tu when pixel rate dividor values were selected. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFFLeo Li
[Why] Recent findings show negligible power savings between IPS2 and RCG during static desktop. In fact, DCN related clocks are higher when IPS2 is enabled vs RCG. RCG_IN_ACTIVE is also the default policy for another OS supported by DC, and it has faster entry/exit. [How] Remove previous logic that checked for IPS2 support, and just default to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`. Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Revert "not disable dtb as dto src at dpms off"Charlene Liu
[why] not all the asic using the same code path. need to revisit and limit the impact. This reverts commit 32be4e39f459f3ac9c191569ae8e3731cb82f7ab. Reviewed-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinksGeorge Shen
[Why/How] LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier may not support this register, assume the mandatory value is programmed by the LTTPR to avoid AUX timeout issues. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Fix ACPI edid parsing on some Lenovo systemsMario Limonciello
[Why] The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd block index starts after 255, so it can't be indexed properly. This leads to problems with the display when the EDID is parsed. [How] Change the variable type to 'short' so that larger values can be indexed. Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com> Reported-by: Mark Pearson <mpearson@lenovo.com> Suggested-by: David Ober <dober@lenovo.com> Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Promote DC to 3.2.329Taimur Hassan
Summary: * Implement HDMI Read request * RMCM and MCM 3DLUT support * Enable urgent latency adjustment on DCN35 * Enable phy-ssc reduction by default Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: enable phy-ssc reduction by defaultRoman Li
[Why] Reduction of phy-ssc is needed to support DP2 high pixel clock on dcn35x/36. There's a special flag to enable it in dmub hw params. [How] Set hbr3_phy_ssc to true for dcn35, dcn351 and dcn36. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Enable urgent latency adjustment on DCN35Nicholas Susanto
[Why] Urgent latency adjustment was disabled on DCN35 due to issues with P0 enablement on some platforms. Without urgent latency, underflows occur when doing certain high timing configurations. After testing, we found that reenabling urgent latency didn't reintroduce p0 support on multiple platforms. [How] renable urgent latency on DCN35 and setting it to 3000 Mhz. This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <nsusanto@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: DCN42 RMCM and MCM 3DLUT supportYihan Zhu
[WHY & HOW] Providing hardware programming for the RMCM and MCM IPs for 3DLUT in DCN42. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: DCN32 null data checkYihan Zhu
[WHY & HOW] Avoid null curve data structure used in the cm block for the potential issue. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Force full update in gpu resetRoman Li
[Why] While system undergoing gpu reset always do full update to sync the dc state before and after reset. [How] Return true in should_reset_plane() if gpu reset detected Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Fix gpu reset in multidisplay configRoman Li
[Why] The indexing of stream_status in dm_gpureset_commit_state() is incorrect. That leads to asserts in multi-display configuration after gpu reset. [How] Adjust the indexing logic to align stream_status with surface_updates. Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Move Mode Support Prefetch Checks To Its Own FunctionAustin Zheng
[Why] Large stack size observed in DCN4 mode support when compiling with clang. Additional instrumentation added by compiler adds to stack size. dml_core_mode_support ends up going over the stack size limit due to the size of the function. [How] Move checks and calculations for prefetch to its own function. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Move desync error counter operation up.Jack Chang
[Why & How] Move desync error counter operation up to prevent it from being skipped by force disable desync error. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1Mario Limonciello
[Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Implement HDMI Read RequestChris Park
[Why] Read Request provides alterative method to polling to the HDMI sinks that support it. [How] Implement Read Request where interrupt can be generated by the sink. Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: To apply the adjusted DP ref clock for DP devicesYiling Chen
[Why] For some pixel clock margin sensitive external monitor, we could not keep original DP ref clock for the ASICs supported SSC DP ref clock. [How] From slicon design team's comment, we have to apply the adjusted DP ref clock for DP devices. DP 128b (DP2) signals uses the DTBCLK not DP ref. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Add error check for avi and vendor infoframe setup functionWentao Liang
The function fill_stream_properties_from_drm_display_mode() calls the function drm_hdmi_avi_infoframe_from_display_mode() and the function drm_hdmi_vendor_infoframe_from_display_mode(), but does not check its return value. Log the error messages to prevent silent failure if either function fails. Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: add missing DCE6 to dce_version_to_string()Alexandre Demers
Missing DCE 6.0 6.1 and 6.4 are identified as UNKNOWN. Fix this. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: fix typo in bios_parser.cAlexandre Demers
Probably a cut and paste error from using get_integrated_info_v8's comment. This has to be get_integrated_info_v9 Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-21 05:14:56 +0000