Age | Commit message (Collapse) | Author |
|
sysfs_emit and sysfs_emit_at requrie a page boundary
aligned buf address. Make them happy!
v2: use an inline function.
Warning Log:
[ 492.545174] invalid sysfs_emit_at: buf:00000000f19bdfde at:0
[ 492.546416] WARNING: CPU: 7 PID: 1304 at fs/sysfs/file.c:765 sysfs_emit_at+0x4a/0xa0
[ 492.654805] Call Trace:
[ 492.655353] ? smu_cmn_get_metrics_table+0x40/0x50 [amdgpu]
[ 492.656780] vangogh_print_clk_levels+0x369/0x410 [amdgpu]
[ 492.658245] vangogh_common_print_clk_levels+0x77/0x80 [amdgpu]
[ 492.659733] ? preempt_schedule_common+0x18/0x30
[ 492.660713] smu_print_ppclk_levels+0x65/0x90 [amdgpu]
[ 492.662107] amdgpu_get_pp_od_clk_voltage+0x13d/0x190 [amdgpu]
[ 492.663620] dev_attr_show+0x1d/0x40
Signed-off-by: Lang Yu <lang.yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are three identical spelling mistakes in dev_err messages.
Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
initial modification of files
renoir_ppt.c
aldebaran_ppt.c
yellow_carp_ppt.c
=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
LOGFILE=pp_printf.test.log
lspci -nn | grep "VGA\|Display" > $LOGFILE
FILES="pp_dpm_sclk
pp_power_profile_mode "
for f in $FILES
do
echo === $f === >> $LOGFILE
cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add support to read smart shift apu and dgpu power share
on renoir.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Perform dependent to independent throttle status translation
for renoir.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable displaying DPM levels for VCN clocks
in swsmu supported ASICs
v2: removed set functions for navi, renoir
v3: removed set function from arcturus
v4: added missing defines in drm_table and remove
uneeded goto label in navi10_ppt.c
Signed-off-by: David M Nieto <david.nieto@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to add the callback to get the bootup values for renoir.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the gpu_metrics interface implementations to use the latest
upgraded data structures.
V2: fit the data type change of energy_accumulator
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Making them an error confuses users and the errors are harmless
as not all asics support all profiles.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We should commit the value after restore them back to default as well.
$ echo "r" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"power_dpm_force_perfomance_level"
There are spelling mistakes in error and warning messages, the text
power_dpm_force_perfomance_level is missing a letter r and should be
power_dpm_force_performance_level. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to make the error log more clear for fine grain tuning
function, it covers Raven/Raven2/Picasso/Renoir/Vangogh.
The fine grain tuning function uses the sysfs file -- pp_od_clk_voltage,
but only when another sysfs file -- power_dpm_force_performance_level is
switched to "manual" mode, it is allowed to access "pp_od_clk_voltage".
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
the soft gpu metrics is not asic related data structure.
unify them to reduce duplicate code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Align with Vangogh.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1467
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL
In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
the SpareX is reserved by SMU firmware, the driver is never use it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to modify the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
It is risky to add two new flags to common smu struct, so
this patch uses the existing flag to make these two sysfs nodes works
separately. Only when power_dpm_force_perfomance_level is changed
to "manual" mode, the fine grain function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the fine grain tuning function will be shut down and the frequency range
of gfx will be restored the default value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to fix one superfluous error for renoir.
Renoir supports 5 kinds of power profile mode:
"FULL SCREEN 3D", "VIDEO", "VR", "COMPUTE" and "CUSTOM".
After loading amdgpu driver, the driver will set "BOOTUP_DEFAULT"
mode to APU, and it will get one superfluouserror error,
which is saying "Unsupported power profile mode 0 on RENOIR",
but it will not make any other harmful events, so fix this error.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to improve the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
And the flag "od_enabled" is used to control the overdrive function for
dGPU, like navi10, navi14 and navi21.
APU like Renior or Vangogh uses this "od_enabled" to configure
the frequency range of gfx clock, but the max value of frequency
range will not be higher than the safe limit, it is not "overdrive".
So this patch adds two new flags -- "fine_grain_enabled" and
"fine_grain_started" to avoid this confusion, the flag will
make these two sysfs nodes work separately.
The flag "fine_grain_enabled" is set as "enabled" by default,
so the fine grain tuning function will be enabled by default.
But the flag "fine_grain_started" is set as "false" by default,
so the fine grain function will not take effect until it is set as
"true".
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag "fine_grain_started" will be set as "true",
and the fine grain tuning function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the flag "fine_grain_started" will be set as "false", and the od range of
fine grain tuning function will be restored default value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to fix the failure when change power profile to
"profile_peak" for renoir.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is to add the fine grain tuning function for renoir.
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency manually or restore the default value.
Command guide:
echo "s level value" > pp_od_clk_voltage
"s" - set the sclk frequency
"level" - 0 or 1, "0" represents the min value, "1" represents
the max value
"value" - the target value of sclk frequency, it should
be limited in the safe range
echo "r" > pp_od_clk_voltage
"r" - reset the sclk frequency, restore the default value instantly
echo "c" > pp_od_clk_voltage
"c" - commit the min and max value of sclk frequency to the system
only after the commit command, the target values set by "s" command
will take effect.
Example:
1)change power profile from "auto" to "standard"
$ cat power_dpm_force_performance_level
auto
$ echo "profile_standard" > power_dpm_force_performance_level
$ cat power_dpm_force_performance_level
profile_standard
2)check the default sclk frequency
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
3)use "s" -- set command to configure the min and max sclk frequency
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
4)use "r" -- reset command to restore the min or max sclk frequency
$ echo "r" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Just query the metrics table directly rather than going through
an extra level of functions.
v2: use proper enum
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following W=1 kernel build warning(s):
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The gfx_state_change_set() funtion can support set GFX power
change status to D0/D3.
v2: make sure to register callback (Alex)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So we print the proper SMU firmware version in debugfs, ioctls, etc.
for Renoir.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the UMD stable Pstate settings with correct clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Which tells it's a normal pstate change or memory retraining.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Changfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The convertion to "struct dm_pp_clock_range_for_mcif_wm_set_soc15"
is totally unnecessary and can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Changfeng Zhu <Changfeng.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Grab the data from the SMU metrics table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Grab the data from the SMU metrics table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The target is to provide a clear entry point(for power routines).
Also this can help to maintain a clear view about the frameworks
used on different ASICs. Hopefully all these can make power part
more friendly to play with.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|