Age | Commit message (Collapse) | Author |
|
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit addresses buffer overflow in the smu_v14_0_init_microcode
function. The issue was about the snprintf function writing more bytes
into the fw_name buffer than it can hold.
The line of code is:
snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
Here, snprintf is used to write a formatted string into fw_name. The
format is "amdgpu/%s.bin", where %s is a placeholder for the string
ucode_prefix. The sizeof(fw_name) argument tells snprintf the maximum
number of bytes it can write into fw_name, including the
null-terminating character. In the original code, fw_name is an array of
30 characters.
The string "amdgpu/%s.bin" could be up to 41 bytes long, which exceeds
the 30 bytes allocated for fw_name. This is because %s could be replaced
by ucode_prefix, which can be up to 29 characters long. Adding the 12
characters from "amdgpu/" and ".bin", the total length could be 41
characters.
To address this, the size of ucode_prefix has been reduced to 15
characters. This ensures that the maximum length of the string written into
fw_name does not exceed its capacity.
smu_13/14 etc. don't follow legacy scheme ie., amdgpu_ucode_legacy_naming
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c: In function ‘smu_v14_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: fe6cd9152464 ("drm/amd/swsmu: add smu14 ip support")
Cc: Li Ma <li.ma@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu v14.0.1 re-used smu v14.0.0
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the od status info if it's not supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.10-2024-04-19:
amdgpu:
- DC resource allocation logic updates
- DC IPS fixes
- DC YUV fixes
- DMCUB fixes
- DML2 fixes
- Devcoredump updates
- USB-C DSC fix
- Misc display code cleanups
- PSR fixes
- MES timeout fix
- RAS updates
- UAF fix in VA IOCTL
- Fix visible VRAM handling during faults
- Fix IP discovery handling during PCI rescans
- Misc code cleanups
- PSP 14 updates
- More runtime PM code rework
- SMU 14.0.2 support
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Suspend/resume fixes
- SR-IOV fixes
amdkfd:
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
radeon:
- Silence UBSAN warnings related to flexible arrays
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419224332.2938259-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.10-2024-04-13:
amdgpu:
- HDCP fixes
- ODM fixes
- RAS fixes
- Devcoredump improvements
- Misc code cleanups
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- SR-IOV fixes
- Suspend and Resume fixes
- DCN 3.5.x Updates
- Z8 fixes
- UMSCH fixes
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- VCN partitioning fix
- DC DWB fixes
- VSC SDP fixes
- DCN 3.1.6 fix
- GC 11.5 fixes
- Remove invalid TTM resource start check
- DCN 1.0 fixes
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
radeon:
- Misc code cleanups
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240413213708.3427038-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add smu v14_0_2 ppt fucs support.
v2: squash in updates (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add initial support for smu v14_0_2.
v2: fix warnings (Alex)
v3: squash in various fixes (Alex)
v4: squash in various fixes (Alex)
v5: remove hardcoded pptable id (Alex)
v6: update fw version (Alex)
v7: squash in more updates (Alex)
v8: rebase, squash in pptable override updates,
combo table updates, SW CTF support (Alex)
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add pptable header for smu v14_0_2.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add initial smu v14_0_2 ppsmc file
v2: Squash in updates (Alex)
v3: Squash in updates (Alex)
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add initial smu14 driver if file
v2: squash in updates (Alex)
v3: squash in updates (Alex)
v4: squash in updates (Alex)
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add initial swSMU support for smu 14 series ASIC.
v2: rebase (Alex)
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add new aca smu callback parse_error_code{} to avoid specific asic check
in amdgpu_aca.c file
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Setting soft max frequency for MCLK is allowed in 1VF mode in SMUv13.0.6
SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set RAS priority handling capability for SMUv13.0.6 SOCs and categorize
RAS priority messages allowed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When a RAS fatal error is detected, PMFW will only process priority
messages. Other messages won't be taken up for processing and therefore
won't get any response in such a state.
Add logic to filter out non-priority messages when RAS error is
detected. Also, don't poll response response status register before
sending priority messages. Use firmware capability flag to determine
whether to filter priority messages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add flags to categorize messages and PMFW capabilities.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use OD (pp_od_clk_voltage) interface to report current limits,
default or those set by user, for SCLK and UCLK on aldebaran.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use OD (pp_od_clk_voltage) interface to report current limits,
default or those set by user, for SCLK and UCLK on smu_v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add more possible ext error code.
v2: still use ext error code instead of UC bit.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check AMDGPU_RUNPM_BAMACO intead of amdgpu_runtime_pm
when setting baco state.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
centralize all pp_dpm_xxx attr nodes into
pp_dpm_clk_default_attr_update() function.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for MACO flag checking.
MACO mode only works if BACO is supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pptable_funcs
Use a unified and more explicit name get_bamaco_support
to replace is_baco_support and get_asic_baco_capability
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a new runtime pm mode AMDGPU_RUNPM_BAMACO
and related macro definition
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix the high voltage issue after unload on smu 13.0.10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.
Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1:
add a new enumeration type to identify device attribute node,
this method is relatively more efficient compared with 'strcmp' in
update_attr() function.
v2:
rename device_attr_type to device_attr_id.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Ma Jun <majun@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add new vcn and jpeg msg
v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reducing the size of ucode_prefix to 25 in the smu_v11_0_init_microcode
function. we ensure that fw_name can accommodate the maximum possible
string size
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c: In function ‘smu_v11_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:54: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 36
110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pp_dpm_*clk should be set as read only for SRIOV one VF mode, remove
S_IWUGO flag and _store function of these debugfs in one VF mode.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will add VCN sensor value for SMU 14.0.0.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull drm fixes from Dave Airlie:
"Fixes from the last week (or 3 weeks in amdgpu case), after amdgpu,
it's xe and nouveau then a few scattered core fixes.
core:
- fix rounding in drm_fixp2int_round()
bridge:
- fix documentation for DRM_BRIDGE_OP_EDID
sun4i:
- fix 64-bit division on 32-bit architectures
tests:
- fix dependency on DRM_KMS_HELPER
probe-helper:
- never return negative values from .get_modes() plus driver fixes
xe:
- invalidate userptr vma on page pin fault
- fail early on sysfs file creation error
- skip VMA pinning on xe_exec if no batches
nouveau:
- clear bo resource bus after eviction
- documentation fixes
- don't check devinit disable on GSP
amdgpu:
- Freesync fixes
- UAF IOCTL fixes
- Fix mmhub client ID mapping
- IH 7.0 fix
- DML2 fixes
- VCN 4.0.6 fix
- GART bind fix
- GPU reset fix
- SR-IOV fix
- OD table handling fixes
- Fix TA handling on boards without display hardware
- DML1 fix
- ABM fix
- eDP panel fix
- DPPCLK fix
- HDCP fix
- Revert incorrect error case handling in ioremap
- VPE fix
- HDMI fixes
- SDMA 4.4.2 fix
- Other misc fixes
amdkfd:
- Fix duplicate BO handling in process restore"
* tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/amdgpu/pm: Don't use OD table on Arcturus
drm/amdgpu: drop setting buffer funcs in sdma442
drm/amd/display: Fix noise issue on HDMI AV mute
drm/amd/display: Revert Remove pixle rate limit for subvp
Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"
Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()"
drm/amd/display: Add a dc_state NULL check in dc_state_release
drm/amd/display: Return the correct HDCP error code
drm/amd/display: Implement wait_for_odm_update_pending_complete
drm/amd/display: Lock all enabled otg pipes even with no planes
drm/amd/display: Amend coasting vtotal for replay low hz
drm/amd/display: Fix idle check for shared firmware state
drm/amd/display: Update odm when ODM combine is changed on an otg master pipe with no plane
drm/amd/display: Init DPPCLK from SMU on dcn32
drm/amd/display: Add monitor patch for specific eDP
drm/amd/display: Allow dirty rects to be sent to dmub when abm is active
drm/amd/display: Override min required DCFCLK in dml1_validate
drm/amdgpu: Bypass display ta if display hw is not available
drm/amdgpu: correct the KGQ fallback message
drm/amdgpu/pm: Check the validity of overdiver power limit
...
|
|
add new vcn and jpeg msg
v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will add VCN sensor value for SMU 13.0.5.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will add VCN sensor value for yellow carp.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will drm/amdgpu: add VCN sensor value for Vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new types to distinguish between ACA error type and smu mca type.
e.g.:
the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank
channel, so add new type 'aca_smu_type' to distinguish aca error type
and smu mca type.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c: In function ‘smu_v13_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
108 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
108 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will add vclk and dclk sysfs node for some ASICs.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will add VCN sensor value for SMU 13.0.4.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Report pcie link speed/width using metric table in case
of one vf & if pmfw support is available, else report directly from
registers in case of pf. Skip reporting it for other cases.
v2: Skip multi-vf check(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update PMFW interface headers for updated metrics table
with pcie link speed and pcie link width
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will add the sensor value of VCN activity for some ASICs.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
OD is not supported on Arcturus, so the OD table
should not be used.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check the validity of overdriver power limit before using it.
Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Lazar Lijo <lijo.lazar@amd.com>
Suggested-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Because powerplay_table initialization is skipped under
sriov case, We check and set default lower and upper OD
value if powerplay_table is NULL.
Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yin Zhenguo <zhenguo.yin@amd.com>
Suggested-by: Lazar Lijo <lijo.lazar@amd.com>
Suggested-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|