summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2022-09-28drm/bridge: lt8912b: set hdmi or dvi modePhilippe Schenker
The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads from EDID what the display needs and sets it accordingly. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
2022-09-28drm/bridge: lt8912b: add vsync hsyncPhilippe Schenker
Currently the bridge driver does not take care whether or not the display needs positive/negative vertical/horizontal syncs. Pass these two flags to the bridge from the EDID that was read out from the display. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
2022-09-23drm/bridge: lt8912b: clarify lvds output statusFrancesco Dolcini
Add comments on the lt8912_write_lvds_config() config to document the current settings and to make it clear that this is a hardcoded configuration not relevant for the HDMI output (could be removed without affecting the HDMI port). No changes on the actual register writes. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch
2022-09-20drm: bridge/dw-hdmi-ahb-audio: use strscpy() is more robust and saferMinghao Chi
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220919030401.211331-1-chi.minghao@zte.com.cn
2022-09-19Revert "drm/bridge: chrontel-ch7033: Add byteswap order setting"Robert Foss
Revert this patch since it depends on devicetree functionality that previously has been reverted in the below commit. commit e798ba3374a1 ("Revert "dt-bindings: Add byteswap order to chrontel ch7033"") This reverts commit ce9564cfc9aea65e68eb343c599317633bc2321a. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220919102009.150503-3-robert.foss@linaro.org
2022-09-19Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector ↵Robert Foss
operations for DP"" This commit was accidentally reverted instead of another commit, and therefore needs to be reinstated. This reverts commit 8c9c40ec83445b188fb6b59e119bf5c2de81b02d. Fixes: 8c9c40ec8344 ("Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"") Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220919102009.150503-2-robert.foss@linaro.org
2022-09-14Merge drm/drm-next into drm-misc-nextMaxime Ripard
We need 6.0-rc1 to merge the backlight rework PR. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-09-12Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"Robert Foss
As reported by Laurent in response to this commit[1], this functionality should not be implemented using the devicetree, because of this let's revert this series for now. This reverts commit c312b0df3b13e4c533743bb2c37fd1bc237368e5. [1] https://lore.kernel.org/all/20220902153906.31000-2-macroalpha82@gmail.com/ Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912113856.817188-3-robert.foss@linaro.org
2022-09-12drm/bridge: it6505: use drm_debug_enabled() in it6505_debug_print()Hamza Mahfooz
As made mention of in commit 9f0ac028410f ("drm/print: rename drm_debug to __drm_debug to discourage use"), we shouldn't explicitly refer to __drm_debug in this context. So, use drm_debug_enabled() instead. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Hamza Mahfooz <someguy@effective-light.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220910224816.15058-1-someguy@effective-light.com
2022-09-11Merge tag 'drm-misc-next-2022-09-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.1-rc1: [airlied - fix sun4i_tv build] UAPI Changes: - Hide unregistered connectors from GETCONNECTOR ioctl. - drm/virtio no longer advertises LINEAR modifier, as it doesn't work. - Cross-subsystem Changes: - Fix GPF in udmabuf failure path. Core Changes: - Rework TTM placement to use intersect/compatible functions. - Drop legacy DP-MST support. - More DP-MST related fixes, and move all state into atomic. - Make DRM_MIPI_DBI select DRM_KMS_HELPER. - Add audio_infoframe packing for DP. - Add logging when some atomic check functions fail. - Assorted documentation updates and fixes. Driver Changes: - Assorted cleanups and fixes in msm, lcdif, nouveau, virtio, panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via, bochs, qxl, sun4i. - Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels. - Improve DP-MST modeset state handling in amdgpu, nouveau, i915. - Drop DP-MST from radeon driver, it was broken and only user of legacy DP-MST. - Handle unplugging better in vc4. - Simplify drm cmdparser tests. - Add DP support to ti-sn65dsi86. - Add MT8195 DP support to mediatek. - Support RGB565, XRGB64, and ARGB64 formats in vkms. - Convert sun4i tv support to atomic. - Refactor vc4/vec TV Modesetting, and fix timings. - Use atomic helpers instead of simple display helpers in ssd130x. Maintainer changes: - Add Douglas Anderson as reviewer for panel-edp. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a489485b-3ebc-c734-0f80-aed963d89efe@linux.intel.com
2022-09-06drm/bridge: anx7625: Set HPD irq detect window to 2msXin Ji
Some panels trigger HPD irq due to noise, the HPD debounce may be 1.8ms, exceeding the default irq detect window, ~1.4ms. This patch set HPD irq detection window to 2ms to tolerate the HPD noise. Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220903130833.541463-1-xji@analogixsemi.com
2022-09-06Merge tag 'drm-misc-next-2022-08-20-1' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.1: UAPI Changes: Cross-subsystem Changes: - DMA-buf: documentation updates. - Assorted small fixes to vga16fb - Fix fbdev drivers to use the aperture helpers. - Make removal of conflicting drivers work correctly without fbdev enabled. Core Changes: - bridge, scheduler, dp-mst: Assorted small fixes. - Add more format helpers to fourcc, and use it to replace the cpp usage. - Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx ("darkness", inverted single channel) - Add packed AYUV8888 and XYUV8888 formats. - Assorted documentation updates. - Rename ttm_bo_init to ttm_bo_init_validate. - Allow TTM bo's to exist without backing store. - Convert drm selftests to kunit. - Add managed init functions for (panel) bridge, crtc, encoder and connector. - Fix endianness handling in various format conversion helpers. - Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565 - Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so drm_plane_helper is no longer needed in most drivers. - Use idr_init_base instead of idr_init. - Rename FB and GEM CMA helpers to DMA helpers. - Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that takes a iosys_map. Make drm_fb_memcpy take an iosys_map too. - Move edid luminance calculation to core, and use it in i915. Driver Changes: - bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767}, nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111: Assorted small fixes and doc updates. - vc4: Rework hdmi power up, and depend on PM. - panel/simple: Add Samsung LTL101AL01. - ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property is unchanged, and use the new PM ops. - Revert some amdgpu commits that cause garbaged graphics when starting X, and reapply them with the real problem fixed. - Completely rework vc4 init to use managed helpers. - Rename via_drv to via_dri1, and move all stuff there only used by the dri1 implementation in preperation for atomic modeset. - Use regmap bulk write in ssd130x. - Power sequence and clock updates to it6505. - Split panel-sitrox-st7701 init sequence and rework mode programming code. - virtio: Improve error and edge conditions handling, and convert to use managed helpers. - Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels. - Add generic fbdev support to komeda. - Split mgag200 modeset handling to make it more model-specific. - Convert simpledrm to use atomic helpers. - Improve udl suspend/disconnect handling. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
2022-09-02drm/bridge: chrontel-ch7033: Add byteswap order settingChris Morgan
Add the option to set the byteswap order in the devicetree. For the official HDMI DIP for the NTC CHIP the byteswap order needs to be RGB, however the driver sets it as BGR. With this patch the driver will remain at BGR unless manually specified via devicetree. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220902153906.31000-3-macroalpha82@gmail.com
2022-09-02drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DPLaurent Pinchart
Implement the bridge connector-related .get_edid() and .detect() operations for full DP mode, and report the related bridge capabilities and type. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-4-tomi.valkeinen@ideasonboard.com
2022-09-02drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) modeLaurent Pinchart
Despite the SN65DSI86 being an eDP bridge, on some systems its output is routed to a DisplayPort connector. Enable DisplayPort mode when the next component in the display pipeline is detected as a DisplayPort connector, and disable eDP features in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reworked to set bridge type based on the next bridge/connector. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> -- Changes since v1/RFC: - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to devm_drm_of_get_bridge" - eDP/DP mode determined from the next bridge connector type. Changes since v2: - Remove setting of Standard DP Scrambler Seed. (It's read-only). - Prevent setting DP_EDP_CONFIGURATION_SET in ti_sn_bridge_atomic_enable() - Use Doug's suggested text for disabling ASSR on DP mode. Changes since v3: - Remove ASSR_CONTROL definition Changes since v4: - Refactor code to configure the DP/eDP scrambler in one place. Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-3-tomi.valkeinen@ideasonboard.com
2022-09-02drm/bridge: ti-sn65dsi86: Reject modes with too large blankingTomi Valkeinen
The front and back porch registers are 8 bits, and pulse width registers are 15 bits, so reject any modes with larger periods. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-2-tomi.valkeinen@ideasonboard.com
2022-09-01gpu/drm/bridge/cadence: avoid flush_scheduled_work() usageTetsuo Handa
Like commit c4f135d643823a86 ("workqueue: Wrap flush_workqueue() using a macro") says, flush_scheduled_work() is dangerous and will be forbidden. We are on the way for removing all flush_scheduled_work() callers from the kernel, and this patch is for removing flush_scheduled_work() call from cadence driver. Since cdns-mhdp8546 driver uses 4 works mhdp->modeset_retry_work mhdp->hpd_work mhdp->hdcp.check_work mhdp->hdcp.prop_work I assume that flush_scheduled_work() in cdns_mhdp_remove() needs to wait for only these 4 works. Since mhdp->modeset_retry_work already uses cancel_work_sync(), I assume that flush_scheduled_work() needs to wait for only 3 works. But I came to wonder whether mhdp->hdcp.check_work should be flushed or cancelled. While flush_scheduled_work() waits for completion of works which were already queued to system_wq, mhdp->hdcp.check_work is a delayed work. That is, this work won't be queued to system_wq unless timeout expires. Current code will wait for mhdp->hdcp.check_work only if timeout already expired. If timeout is not expired yet, flush_scheduled_work() will fail to cancel mhdp->hdcp.check_work, and cdns_mhdp_hdcp_check_work() which is triggered by mhdp->hdcp.check_work will schedule hdcp->check_work, which is too late for flush_scheduled_work() to wait for completion of cdns_mhdp_hdcp_prop_work(). But since I couldn't get comments on how do we want to handle this race window [1], this patch chose "do nothing" for mhdp->hdcp.check_work and mhdp->hdcp.prop_work. That is, I assume that flush_scheduled_work() in cdns_mhdp_remove() needs to wait for only mhdp->hpd_work work. Link: https://lkml.kernel.org/r/943273cb-c2ec-24e3-5edb-64eacc6e2d30@I-love.SAKURA.ne.jp [1] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/216591bc-28bb-0453-10bb-59e268dff540@I-love.SAKURA.ne.jp
2022-08-30drm/bridge: it6505: Fix the order of DP_SET_POWER commandsPin-yen Lin
Send DP_SET_POWER_D3 command to the downstream before stopping DP, so the suspend process will not be interrupted by the HPD interrupt. Also modify the order in .atomic_enable callback to make the callbacks symmetric. Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220830045756.1655954-1-treapking@chromium.org
2022-08-30drm/bridge: megachips: Fix a null pointer dereference bugZheyu Ma
When removing the module we will get the following warning: [ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered [ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI [ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130 [ 31.921825] Call Trace: [ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw] [ 31.923139] i2c_device_remove+0x181/0x1f0 The two bridges (stdp2690, stdp4028) do not probe at the same time, so the driver does not call ge_b850v3_resgiter() when probing, causing the driver to try to remove the object that has not been initialized. Fix this by checking whether both the bridges are probed. Fixes: 11632d4aa2b3 ("drm/bridge: megachips: Ensure both bridges are probed before registration") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com
2022-08-29drm/bridge: ps8640: Add double reset T4 and T5 to power-on sequenceHsin-Yi Wang
The double reset power-on sequence is a workaround for the hardware flaw in some chip that SPI Clock output glitch and cause internal MPU unable to read firmware correctly. The sequence is suggested in ps8640 application note. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Rock Chiu <rock.chiu@paradetech.corp-partner.google.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220815093905.134164-1-hsinyi@chromium.org
2022-08-29drm: bridge: dw_hdmi: only trigger hotplug event on link changeLucas Stach
There are two events that signal a real change of the link state: HPD going high means the sink is newly connected or wants the source to re-read the EDID, RX sense going low is a indication that the link has been disconnected. Ignore the other two events that also trigger interrupts, but don't need immediate attention: HPD going low does not necessarily mean the link has been lost and should not trigger a immediate read of the status. RX sense going high also does not require a detect cycle, as HPD going high is the right point in time to read the EDID. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1) Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
2022-08-29drm/bridge: lvds-codec: Fix error checking of drm_of_lvds_get_data_mapping()Marek Vasut
The drm_of_lvds_get_data_mapping() returns either negative value on error or MEDIA_BUS_FMT_* otherwise. The check for 'ret' would also catch the positive case of MEDIA_BUS_FMT_* and lead to probe failure every time 'data-mapping' DT property is specified. Fixes: 7c4dd0a266527 ("drm: of: Add drm_of_lvds_get_data_mapping") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220801125419.167562-1-marex@denx.de
2022-08-29drm/bridge: tc358767: Handle bridge past DPI outputMarek Vasut
Currently the driver only handles panel directly connected to the DPI output. Handle the case where a bridge is connected past DPI output of this bridge. This could be e.g. DPI to LVDS encoder chip. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220724224317.288727-1-marex@denx.de
2022-08-29drm/bridge: anx7625: Support HDMI_I2S audio formatXin Ji
1. Support HDMI_I2S audio format. 2. Return 0 if there is no sink connection in .hw_param callback. Signed-off-by: Xin Ji <xji@analogixsemi.com> Acked-by: Hsin-Yi Wang <hsinyi@chromium.org> Acked-by: Jiaxin Yu<jiaxin.yu@mediatek.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220726033058.403715-1-xji@analogixsemi.com
2022-08-26drm: bridge: icn6211: Add support for external REFCLKMarek Vasut
The ICN6211 is capable of deriving its internal PLL clock from either MIPI DSI HS clock, external REFCLK clock, or even internal oscillator. Currently supported is only the first option. Add support for external REFCLK clock input in addition to that. There is little difference between these options, except that in case of MIPI DSI HS clock input, the HS clock are pre-divided by a fixed /4 divider before being fed to the PLL input, while in case of external REFCLK, the RECLK clock are fed directly into the PLL input. Per exceptionally poor documentation, the REFCLK must be in range of 10..154 MHz. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220801131747.183041-2-marex@denx.de
2022-08-26drm: bridge: icn6211: Add and use hs_rate and lp_rateMarek Vasut
Fill in hs_rate and lp_rate to struct mipi_dsi_device for this bridge and adjust DSI input frequency calculations such that they expect the DSI host to configure HS clock according to hs_rate. This is an optimization for the DSI burst mode case. In case the DSI device supports DSI burst mode, it is recommended to operate the DSI interface at the highest possible HS clock frequency which the DSI device supports. This permits the DSI host to send as short as possible bursts of data on the DSI link and keep the DSI data lanes in LP mode otherwise, which reduces power consumption. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220801131555.182969-1-marex@denx.de
2022-08-18Merge tag 'drm-misc-fixes-2022-08-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One patch for imx/dcss to get rid of a warning message, one off-by-one fix and GA103 support for nouveau, a refcounting fix for meson, a NULL pointer dereference fix for ttm, a error check fix for lvds-codec, a dt-binding schema fix and an underflow fix for sun4i Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat
2022-08-11drm/bridge: tc358767: disable main link PHYs on main link disableLucas Stach
Disable the main link PHYs and put them into reset when the main link is disabled. When the PHYs stay enabled while the rest of the DP link circuits are disabled there is some noise on the data lanes, which some displays try to lock onto, waking them up from their low power state. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220706132812.2171250-3-l.stach@pengutronix.de
2022-08-11drm/bridge: tc358767: increase CLRSIPO countLucas Stach
The current CLRSIPO count is marginal and does not work with high DSI clock rates. Increase it a bit to allow the DSI link to work at up to 1Gbps lane speed. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220706132812.2171250-2-l.stach@pengutronix.de
2022-08-11drm/bridge: tc358767: don't fixup mode sync polarityLucas Stach
There is no need to enforce a specific sync signal polarity on the DPI interface, as we can simply tell the TC358767 which polarities it should expect on the input interface. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220706132812.2171250-1-l.stach@pengutronix.de
2022-08-11drm/bridge: lvds-codec: Fix error checking of drm_of_lvds_get_data_mapping()Marek Vasut
The drm_of_lvds_get_data_mapping() returns either negative value on error or MEDIA_BUS_FMT_* otherwise. The check for 'ret' would also catch the positive case of MEDIA_BUS_FMT_* and lead to probe failure every time 'data-mapping' DT property is specified. Fixes: 7c4dd0a266527 ("drm: of: Add drm_of_lvds_get_data_mapping") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220801125419.167562-1-marex@denx.de
2022-08-08gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()Zeng Jingxiang
A NULL check for bridge->encoder shows that it may be NULL, but it already been dereferenced on all paths leading to the check. 812 if (!bridge->encoder) { Dereference the pointer bridge->encoder. 810 drm_connector_attach_encoder(&lt9611->connector, bridge->encoder); Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220727073119.1578972-1-zengjx95@gmail.com
2022-08-06Merge tag 'sound-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "As the diffstat shows, we've had lots of developments in a wide range at this time; the majority of changes are about ASoC, including subsystem-wide cleanups, continued SOF / Intel updates and a bunch of new drivers (as usual), while there have been some significant (but almost invisible) improvements in ALSA core side, too. Below are some highlights: Core: - Faster lookups of control elements with Xarray; normal user won't notice, but on the devices with tons of control elements, it can be visibly faster - Support for input validation for controls; this will harden for badly written drivers in general with a slight overhead - Deferred async signal handling for working around the potential deadlocks - Cleanup / refactoring raw MIDI locking code ASoC: - Restructing of the set_fmt() callbacks for making things clearer in situations like CODEC to CODEC links - Clean up and modernizing the DAI naming scheme setups - Merge of more of the Intel AVS driver stack, including some board integrations - New version 4 mechanism for communication with SOF DSPs - Suppoort for dynamically selecting the PLL to use at runtime on i.MX platforms - Improvements for CODEC to CODEC support in the generic cards - Support for AMD Jadeite and various machines, AMD RPL, Intel MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments TAS2780 HD- and USB-audio: - Continued improvement for CS35L41 (sub)codec support - More quirks for various devices (HP, Lenovo, Dell, Clevo)" * tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits) ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx ALSA: line6: Replace sprintf() with sysfs_emit() ALSA: hda: Replace sprintf() with sysfs_emit() ALSA: pcm: Replace sprintf() with sysfs_emit() ALSA: core: Replace scnprintf() with sysfs_emit() ALSA: control-led: Replace sprintf() with sysfs_emit() ALSA: aoa: Replace sprintf() with sysfs_emit() ALSA: ac97: Replace sprintf() with sysfs_emit() ALSA: hda/realtek: Add quirk for Clevo NV45PZ ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7 ALSA: control: Use deferred fasync helper ALSA: pcm: Use deferred fasync helper ALSA: timer: Use deferred fasync helper ALSA: core: Add async signal helpers ASoC: q6asm: use kcalloc() instead of kzalloc() ACPI: scan: Add CLSA0101 Laptop Support ALSA: hda: cs35l41: Support CLSA0101 ALSA: hda: cs35l41: Use the CS35L41 HDA internal define ASoC: dt-bindings: use spi-peripheral-props.yaml ASoC: codecs: va-macro: use fsgen as clock ...
2022-07-23drm/bridge: ti-sn65dsi86: Use dev_err_probe() to avoid polluting the logJavier Martinez Canillas
If devm_drm_of_get_bridge() can't find the connected bridge, it returns an ERR_PTR(-EPROBE_DEFER) to indicate that the probe should be deferred. But this path also prints an error message, which pollutes the kernel log since is printed on every probe deferral, i.e: $ dmesg | grep "failed to create panel bridge" | wc -l 38 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220722074755.660258-1-javierm@redhat.com
2022-07-21drm/bridge: parade-ps8640: Fix regulator supply orderChen-Yu Tsai
The datasheet says that VDD12 must be enabled and at full voltage before VDD33 is enabled. Reorder the bulk regulator supply names so that VDD12 is enabled before VDD33. Any enable ramp delays should be handled by setting proper constraints on the regulators. Fixes: bc1aee7fc8f0 ("drm/bridge: Add I2C based driver for ps8640 bridge") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220721092258.3397461-1-wenst@chromium.org
2022-07-19drm/bridge: ti-sn65dsi86: support DRM_BRIDGE_ATTACH_NO_CONNECTORDmitry Baryshkov
Now as the driver does not depend on pdata->connector, add support for attaching the bridge with DRM_BRIDGE_ATTACH_NO_CONNECTOR. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220711092117.360797-3-dmitry.baryshkov@linaro.org
2022-07-19drm/bridge: ti-sn65dsi86: fetch bpc using drm_atomic_stateDmitry Baryshkov
Rather than reading the pdata->connector directly, fetch the connector using drm_atomic_state. This allows us to make pdata->connector optional (and thus supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR). Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220711092117.360797-2-dmitry.baryshkov@linaro.org
2022-07-19drm/bridge: tc358767: Add of_node_put() when breaking out of loopLiang He
In tc_probe_bridge_endpoint(), we should call of_node_put() when breaking out of the for_each_endpoint_of_node() which will automatically increase and decrease the refcount. Fixes: 71f7d9c03118 ("drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220719065447.1080817-2-windhl@126.com
2022-07-19drm/bridge: anx7625: Fix refcount bug in anx7625_parse_dt()Liang He
In anx7625_parse_dt(), 'pdata->mipi_host_node' will be assigned a new reference with of_graph_get_remote_node() which will increase the refcount of the object, correspondingly, we should call of_node_put() for the old reference stored in the 'pdata->mipi_host_node'. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220719065447.1080817-1-windhl@126.com
2022-07-18drm/bridge: it6505: Modified video clock calculation and video debug messageallen chen
Speed up video clock calculation and remove redundant video debug message. Signed-off-by: Pin-Yen Lin <treapking@chromium.org> Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-4-allen.chen@ite.com.tw
2022-07-18drm/bridge: it6505: Add i2c api power on checkallen chen
Use i2c bus to read/write when it6505 power off will occur i2c error. Add this check will prevent i2c error when it6505 power off. Signed-off-by: Pin-Yen Lin <treapking@chromium.org> Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-3-allen.chen@ite.com.tw
2022-07-18drm/bridge: it6505: Modified power sequenceallen chen
Change power sequence to meet it6505 data sheet requirement when boot on. Signed-off-by: Pin-Yen Lin <treapking@chromium.org> Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-2-allen.chen@ite.com.tw
2022-07-18drm/bridge: it6505: Power on downstream device in .atomic_enablePin-Yen Lin
Send DPCD DP_SET_POWER_D0 command to the monitor in .atomic_enable callback. Without this command, some monitors won't show up again after changing the resolution. Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream") Signed-off-by: Pin-Yen Lin <treapking@chromium.org> Reviewed-by: Allen Chen <allen.chen@ite.com.tw> Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream") Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220714173715.v2.1.I85af54e9ceda74ec69f661852825845f983fc343@changeid
2022-07-15Merge tag 'asoc-v5.20' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v5.20 This is a big release thus far and there will probably be more changes to come, it's a combination of a larger than usual crop of new drivers and some subsysetm wide cleanups from Charles rather than anything structural. The SOF and Intel DSP code both also continue to be very actively developed. - Restructing of the set_fmt() callbacks to be specified in terms of the device rather than with semantics depending on if the device is supposed to be a CODEC or SoC, making things clearer in situations like CODEC to CODEC links. - Clean up of the way we flag which DAI naming scheme we use to reflect the progress that's been made modernising things. - Merge of more of the Intel AVS driver stack, including some board integrations. - New version 4 mechanism for communication with SOF DSPs. - Suppoort for dynamically selecting the PLL to use at runtime on i.MX platforms. - Improvements for CODEC to CODEC support in the generic cards. - Support for AMD Jadeite and various machines, Intel MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments TAS2780.
2022-07-13drm/bridge: panel: Introduce drmm_of_get_bridgeMaxime Ripard
Unlike what can be found for other DRM entities, we don't have a DRM-managed function equivalent to devm_drm_of_get_bridge(). Let's create it. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220711173939.1132294-12-maxime@cerno.tech
2022-07-13drm/bridge: panel: Introduce drmm_panel_bridge_addMaxime Ripard
Unlike what can be found for other entities, there's no DRM-managed function to create a panel_bridge instance from a panel. Let's introduce one. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220711173939.1132294-11-maxime@cerno.tech
2022-07-09drm/mipi-dsi: Make remove callback return voidUwe Kleine-König
All implementations return 0 and the return value of mipi_dsi_drv_remove() is ignored anyhow. So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
2022-07-07drm: bridge: adv7511: unregister cec i2c device after cec adapterAlvin Šipraga
cec_unregister_adapter() assumes that the underlying adapter ops are callable. For example, if the CEC adapter currently has a valid physical address, then the unregistration procedure will invalidate the physical address by setting it to f.f.f.f. Whence the following kernel oops observed after removing the adv7511 module: Unable to handle kernel execution of user memory at virtual address 0000000000000000 Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP Call trace: 0x0 adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511] cec_adap_unconfigure+0x44/0x90 [cec] __cec_s_phys_addr.part.0+0x68/0x230 [cec] __cec_s_phys_addr+0x40/0x50 [cec] cec_unregister_adapter+0xb4/0x118 [cec] adv7511_remove+0x60/0x90 [adv7511] i2c_device_remove+0x34/0xe0 device_release_driver_internal+0x114/0x1f0 driver_detach+0x54/0xe0 bus_remove_driver+0x60/0xd8 driver_unregister+0x34/0x60 i2c_del_driver+0x2c/0x68 adv7511_exit+0x1c/0x67c [adv7511] __arm64_sys_delete_module+0x154/0x288 invoke_syscall+0x48/0x100 el0_svc_common.constprop.0+0x48/0xe8 do_el0_svc+0x28/0x88 el0_svc+0x1c/0x50 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x15c/0x160 Code: bad PC value ---[ end trace 0000000000000000 ]--- Protect against this scenario by unregistering i2c_cec after unregistering the CEC adapter. Duly disable the CEC clock afterwards too. Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-3-alvin@pqrs.dk
2022-07-07drm: bridge: adv7511: fix CEC power down control register offsetAlvin Šipraga
The ADV7511_REG_CEC_CTRL = 0xE2 register is part of the main register map - not the CEC register map. As such, we shouldn't apply an offset to the register address. Doing so will cause us to address a bogus register for chips with a CEC register map offset (e.g. ADV7533). Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-2-alvin@pqrs.dk
2022-07-06drm/bridge: ti-sn65dsi86: Use atomic variants of drm_bridge_funcsSam Ravnborg
Move away from the deprecated enable/disable operations in drm_bridge_funcs and enable atomic use. v3: - Drop use of DRM_BRIDGE_STATE_OPS v2: - fix build (kernel test robot <lkp@intel.com>) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220703202724.9553-2-sam@ravnborg.org
generated by cgit (git 2.34.1) at 2025-04-15 09:45:12 +0000