summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2024-10-03drm/bridge: it6505: Drop EDID cache on bridge power offPin-yen Lin
The bridge might miss the display change events when it's powered off. This happens when a user changes the external monitor when the system is suspended and the embedded controller doesn't not wake AP up. It's also observed that one DP-to-HDMI bridge doesn't work correctly when there is no EDID read after it is powered on. Drop the cache to force an EDID read after system resume to fix this. Fixes: 11feaef69d0c ("drm/bridge: it6505: Add caching for EDID") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-3-treapking@chromium.org
2024-10-03drm/bridge: anx7625: Drop EDID cache on bridge power offPin-yen Lin
The bridge might miss the display change events when it's powered off. This happens when a user changes the external monitor when the system is suspended and the embedded controller doesn't not wake AP up. It's also observed that one DP-to-HDMI bridge doesn't work correctly when there is no EDID read after it is powered on. Drop the cache to force an EDID read after system resume to fix this. Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-30Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-23drm/bridge: it6505: Enable module autoloadingLiao Chen
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240902113320.903147-2-liaochen4@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-09-19Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "This adds a couple of patches outside the drm core, all should be acked appropriately, the string and pstore ones are the main ones that come to mind. Otherwise it's the usual drivers, xe is getting enabled by default on some new hardware, we've changed the device number handling to allow more devices, and we added some optional rust code to create QR codes in the panic handler, an idea first suggested I think 10 years ago :-) string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler: - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: - add support for BOE NE140WUM-N6G - revert support for SDC ATNA45AF01 - visionox-vtdr6130: - improve error handling - use devm_regulator_bulk_get_const() - boe-th101mb31ig002: - Support for starry-er88577 MIPI-DSI panel plus DT - Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT - Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: - support Innolux G070ACE-LH3 plus DT bindings - support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: - decouple DSI and DRM code - add SPI support - support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: - Support RGB display on Rockchip RK3066 - Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: - Fix transparency after disabling plane - Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset" * tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits) drm/xe: Fix missing conversion to xe_display_pm_runtime_resume drm/xe/xe2hpg: Add Wa_15016589081 drm/xe: Don't keep stale pointer to bo->ggtt_node drm/xe: fix missing 'xe_vm_put' drm/xe: fix build warning with CONFIG_PM=n drm/xe: Suppress missing outer rpm protection warning drm/xe: prevent potential UAF in pf_provision_vf_ggtt() drm/amd/display: Add all planes on CRTC to state for overlay cursor drm/i915/bios: fix printk format width drm/i915/display: Fix BMG CCS modifiers drm/amdgpu: get rid of bogus includes of fdtable.h drm/amdkfd: CRIU fixes drm/amdgpu: fix a race in kfd_mem_export_dmabuf() drm: new helper: drm_gem_prime_handle_to_dmabuf() drm/amdgpu/atomfirmware: Silence UBSAN warning drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare' drm/amd/amdgpu: apply command submission parser for JPEG v1 drm/amd/amdgpu: apply command submission parser for JPEG v2+ drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3 drm/amd/pm: update the features set on smu v14.0.2/3 ...
2024-09-17Merge tag 'sound-6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A fairly big update at this time, both in core and driver sides. The core received rewrites in PCM buffer allocation handling and locking optimizations, PCM rate updates followed by lots of cleanups. In ASoC side, the legacy Intel drivers have been deprecated by AVS drivers which leaded to the significant amount of code reduction. SoundWire driver updates and other cleanups contributed more code reduction, too. USB-audio driver received a large cleanup of its big quirk table, and the old snd_print*() API usages in many legacy drivers are replaced with the standard print API. Here are some highlights: Core: - More optimized locking in ALSA control code - Rewrites of memalloc helpers for better DMA API usage - Drop of obsoleted vmalloc PCM buffer helper API - Continued MIDI2 UMP updates - Support of a new user-space driven timer instance - Update for more PCM support rates and cleanups - Xrun counter report in the proc files ASoC: - Continued simplification and cleanup works for ASoC - Extensive cleanups and refactoring of the Soundwire drivers - Removal of Intel machine support obsoleted by the AVS driver - Lots of DT schema conversions - Machine support for many AMD and Intel x86 platforms - Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320 SoundWire and rev C, and Texas Instruments TAS2563 USB-audio: - Add support of multiple control interfaces - A large rewrite of quirk table with macros - Support for RME Digiface USB HD-audio: - Cleanup of quirk code for Samsung Galaxy laptops - Clean up of detection of Cirrus codecs - C-Media CM9825 HD-audio codec support Others: - Rewrites to standard print API in a lot of legacy drivers" * tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits) ASoC: topology: Fix redundant logical jump ASoC: tas2781: Add Calibration Kcontrols for Chromebook ASoC: amd: acp: refactor SoundWire machine driver code ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions ASoC: sdw_util/intel: move soundwire endpoint and dai link structures ASoC: intel: sof_sdw: rename soundwire parsing helper functions ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE) ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations ALSA: usb-audio: Add logitech Audio profile quirk ASoc: mediatek: mt8365: Remove unneeded assignment ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards. ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL. ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links ...
2024-09-13drm/bridge: imx8mp-hdmi-tx: allow 0.5% margin with selected clockDominique Martinet
This allows the hdmi driver to pick e.g. 64.8MHz instead of 65Mhz when we cannot output the exact frequency, enabling the imx8mp HDMI output to support more modes Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240907-hdmi-tolerance-v2-1-b9d7abd89f5c@codewreck.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240907-hdmi-tolerance-v2-1-b9d7abd89f5c@codewreck.org
2024-09-13drm/bridge: imx8qxp-ldb: Switch to RUNTIME_PM_OPS()Fabio Estevam
Replace SET_RUNTIME_PM_OPS with its modern RUNTIME_PM_OPS() alternative. The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626230704.708234-6-festevam@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626230704.708234-6-festevam@gmail.com
2024-09-13drm/bridge: dw-hdmi-cec: Switch to SYSTEM_SLEEP_PM_OPS()Fabio Estevam
Replace SET_SYSTEM_SLEEP_PM_OPS with its modern SYSTEM_SLEEP_PM_OPS() alternative. The combined usage of pm_ptr() and SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626230704.708234-5-festevam@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626230704.708234-5-festevam@gmail.com
2024-09-13drm/bridge: samsung-dsim: Switch to RUNTIME_PM_OPS()Fabio Estevam
Replace SET_RUNTIME_PM_OPS with its modern RUNTIME_PM_OPS() alternative. The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626230704.708234-4-festevam@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626230704.708234-4-festevam@gmail.com
2024-09-13drm/bridge: imx8qxp-pixel-combiner: Switch to RUNTIME_PM_OPS()Fabio Estevam
Replace SET_RUNTIME_PM_OPS with its modern RUNTIME_PM_OPS() alternative. The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626230704.708234-3-festevam@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626230704.708234-3-festevam@gmail.com
2024-09-13drm/bridge: imx8qm-ldb: Switch to RUNTIME_PM_OPS()Fabio Estevam
Replace SET_RUNTIME_PM_OPS with its modern RUNTIME_PM_OPS() alternative. The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626230704.708234-2-festevam@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626230704.708234-2-festevam@gmail.com
2024-09-13drm/bridge: imx8mp-hdmi-tx: Switch to SYSTEM_SLEEP_PM_OPS()Fabio Estevam
Replace SET_SYSTEM_SLEEP_PM_OPS with its modern SYSTEM_SLEEP_PM_OPS() alternative. The combined usage of pm_ptr() and SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626230704.708234-1-festevam@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626230704.708234-1-festevam@gmail.com
2024-09-13drm/bridge: tc358767: Support write-only registersAlexander Stein
Most registers are read-writable, but some are only RO or even WO. regmap does not support using readable_reg and wr_table when outputting in debugfs, so switch to writeable_reg. First check for RO or WO registers and fallback tc_readable_reg() for the leftover RW registers. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Link: https://lore.kernel.org/r/20240904120546.1845856-4-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904120546.1845856-4-alexander.stein@ew.tq-group.com
2024-09-13drm/bridge: tc358767: Only print GPIO debug output if they actually occurAlexander Stein
Currently the output the following output is printed upon each interrupt: tc358767 1-000f: GPIO0: This spams the kernel log while debugging an IRQ storm from the bridge. Only print the debug output if the GPIO hotplug event actually happened. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Link: https://lore.kernel.org/r/20240904120546.1845856-3-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904120546.1845856-3-alexander.stein@ew.tq-group.com
2024-09-13drm/bridge: tc358767: Use dev_err_probeAlexander Stein
The function calls preceding these returns can return -EPROBE_DEFER. So use dev_err_probe to add some information to /sys/kernel/debug/devices_deferred Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240904120546.1845856-2-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904120546.1845856-2-alexander.stein@ew.tq-group.com
2024-09-11drm/bridge: ti-sn65dsi86: annotate ti_sn_pwm_pin_{request, release} with ↵Jani Nikula
__maybe_unused Building with clang, W=1, CONFIG_PM=n and CONFIG_OF_GPIO=n leads to warning about unused ti_sn_pwm_pin_request() and ti_sn_pwm_pin_release(). Fix by annotating them with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/136ecd978aedd7df39d1b1c37b70596027ff0a3e.1725962479.git.jani.nikula@intel.com
2024-09-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get fixes from v6.12-rc7. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-11Merge v6.11-rc7 into drm-nextSimona Vetter
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade. Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2024-09-04drm/bridge/tdp158: fix build failureJani Nikula
ARCH=arm build fails with: CC [M] drivers/gpu/drm/bridge/ti-tdp158.o ../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_enable’: ../drivers/gpu/drm/bridge/ti-tdp158.c:31:9: error: implicit declaration of function ‘gpiod_set_value_cansleep’ [-Werror=implicit-function-declaration] 31 | gpiod_set_value_cansleep(tdp158->enable, 1); | ^~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_probe’: ../drivers/gpu/drm/bridge/ti-tdp158.c:80:26: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_regulator_get_optional’? [-Werror=implicit-function-declaration] 80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); | ^~~~~~~~~~~~~~~~~~~~~~~ | devm_regulator_get_optional ../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function) 80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); | ^~~~~~~~~~~~~ ../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: note: each undeclared identifier is reported only once for each function it appears in Add the proper gpio consumer #include to fix this, and juggle the include order to be a bit more pleasant on the eye while at it. Fixes: a15710027afb ("drm/bridge: add support for TI TDP158") Cc: Marc Gonzalez <mgonzalez@freebox.fr> Cc: Robert Foss <rfoss@kernel.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904085206.3331553-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-03drm/bridge: add support for TI TDP158Marc Gonzalez
TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver. It supports DVI 1.0, HDMI 1.4b and 2.0b. It supports 4 TMDS channels, HPD, and a DDC interface. It supports dual power supply rails (1.1V on VDD, 3.3V on VCC) for power reduction. Several methods of power management are implemented to reduce overall power consumption. It supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces. Features - AC-coupled TMDS or DisplayPort dual-mode physical layer input to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps data rate, compatible with HDMI 2.0b electrical parameters - DisplayPort dual-mode standard version 1.1 - Programmable fixed receiver equalizer up to 15.5dB - Global or independent high speed lane control, pre-emphasis and transmit swing, and slew rate control - I2C or pin strap programmable - Configurable as a DisplayPort redriver through I2C - Full lane swap on main lanes - Low power consumption (200 mW at 6Gbps, 8 mW in shutdown) https://www.ti.com/lit/ds/symlink/tdp158.pdf On our board, I2C_EN is pulled high. Thus, this code defines a module_i2c_driver. The default settings work fine for our use-case. So this basic driver doesn't need to tweak any I2C registers. Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240812-tdp158-v5-2-78684a84ec23@freebox.fr
2024-09-03drm/bridge-connector: move to DRM_DISPLAY_HELPER moduleDmitry Baryshkov
drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard <mripard@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-09-03drm/imx: add internal bridge handling display-timings DT nodeDmitry Baryshkov
i.MX DRM DT bindings allow using either a proper panel / bridge graph to provide information about connected panels, or just a display-timings DT node, describing just the timings and the flags. Add helper bridge driver supporting the latter usecase. It will be used by both LDB and parallel-display drivers. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Chris Healy <cphealy@gmail.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-9-e549e2a43100@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-08-27drm/bridge: dw-hdmi: Move vmalloc PCM buffer management into the driverTakashi Iwai
The dw-hdmi drm bridge driver is the only one who still uses the ALSA vmalloc helper API functions. A previous attempt to change the way of buffer management wasn't taken for this legacy stuff, as we had little chance for test and some risk of major breaking. Instead, this patch moves the vmalloc buffer stuff into the dw-hdmi driver code itself, so that we can drop them from ALSA core code afterwards. There should be no functional changes. Link: https://lore.kernel.org/20191210154536.29819-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807152725.18948-2-tiwai@suse.de
2024-08-19drm/bridge: nwl-dsi: Use vsync/hsync polarity from display modeEsben Haabendal
Using the correct bit helps. The documentation specifies bit 0 in both registers to be controlling polarity of dpi_vsync_input and dpi_hsync_input polarity. Bit 1 is reserved, and should therefore not be set. Tested with panel that requires active high vsync and hsync. Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240814-nwl-dsi-sync-polarity-v1-1-ee198e369196@geanix.com
2024-08-19drm: bridge: anx7625: Use of_property_read_variable_u8_array()Rob Herring (Arm)
There's no need to get the length of an DT array property before parsing the array. of_property_read_variable_u8_array() takes a minimum and maximum length and returns the actual length (or error code). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240731201407.1838385-4-robh@kernel.org
2024-08-19drm/bridge: dw-hdmi: Simplify clock handlingCristian Ciocaltea
Make use of devm_clk_get_enabled() to replace devm_clk_get() and clk_prepare_enable() for isfr and iahb clocks, and drop the now unnecessary calls to clk_disable_unprepare(). Similarly, use devm_clk_get_optional_enabled() helper for cec clock, which additionally allows to remove the -ENOENT test. Moreover, the clock related members of struct dw_hdmi are not required anymore, hence drop them. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240813-dw-hdmi-simple-clk-v1-1-78d45cef02a9@collabora.com
2024-08-19drm/bridge: lontium-lt8912b: Validate mode in drm_bridge_funcs::mode_valid()Liu Ying
If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set, this driver won't initialize a connector and hence display mode won't be validated in drm_connector_helper_funcs::mode_valid(). So, move the mode validation from drm_connector_helper_funcs::mode_valid() to drm_bridge_funcs::mode_valid(), because the mode validation is always done for the bridge. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com
2024-08-09Merge tag 'drm-misc-next-2024-08-09' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: - remove Power Saving Policy property Core Changes: - update connector documentation CI: - add tests for mediatek, meson, rockchip Driver Changes: amdgpu: - revert support for Power Saving Policy property bridge: - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR mgag200: - transparently support BMC outputs omapdrm: - use common helper for_each_endpoint_of_node() panel: - panel-edp: fix name for HKC MB116AN01 vkms: - clean up endianess warnings Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240809071241.GA222501@localhost.localdomain
2024-08-08Merge tag 'drm-misc-next-2024-08-01' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: virtio: - Define DRM capset Cross-subsystem Changes: dma-buf: - heaps: Clean up documentation printk: - Pass description to kmsg_dump() Core Changes: CI: - Update IGT tests - Point upstream repo to GitLab instance modesetting: - Introduce Power Saving Policy property for connectors - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support panic: - Avoid build-time interference with framebuffer console docs: - Document Colorspace property scheduler: - Remove full_recover from drm_sched_start TTM: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory Driver Changes: amdgpu: - Support Power Saving Policy connector property ast: - astdp: Support AST2600 with VGA; Clean up HPD bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable gma500: - Update i2c terminology ivpu: - Add MODULE_FIRMWARE() lcdif: - Fix pixel clock loongson: - Use GEM refcount over TTM's mgag200: - Improve BMC handling - Support VBLANK intterupts nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's panel: - Shutdown fixes plus documentation - Refactor several drivers for better code sharing - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing sti: - Fix module owner stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - Call drm_atomic_helper_shutdown() v3d: - Clean up perfmon vkms: - Clean up Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box
2024-08-06drm/bridge: lt9611uxc: drop support for !DRM_BRIDGE_ATTACH_NO_CONNECTORDmitry Baryshkov
Having no in-kernel devices that use !DRM_BRIDGE_ATTACH_NO_CONNECTOR mode for the Lontium LT9611UXC bridge, drop the in-bridge implementation of the drm_connector. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240701-lt9611uxc-next-bridge-v1-2-665bce5fdaaa@linaro.org
2024-08-06drm/bridge: lt9611uxc: properly attach to a next bridgeDmitry Baryshkov
If there is a next bridge in the OF graph don't let it be ignored. Attach the next bridge to the chain. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240701-lt9611uxc-next-bridge-v1-1-665bce5fdaaa@linaro.org
2024-08-01drm/bridge: synopsys: dw-mipi-dsi: enable EoTp by defaultChristoph Fritz
Enable the transmission of an EoTp (end of transmission packet) by default. EoTp should be enabled anyway because it is a Linux necessity that can be disabled by a dsi mod_flag if needed. EoTp signals the end of an HS transmission, this adds overall robustness at protocol level at the expense of an increased overhead. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/6a7293bd06942131161c5a7b7878c51cfbbb807e.camel@googlemail.com
2024-07-29Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get a late RC of v6.10 before moving into v6.11. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-07-25drm/bridge: it6505: Disable IRQ when powered offPin-yen Lin
When the bridge is powered off, disable the IRQ until the next power on to workaround an interrupt storm on some badly-designed hardware. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240719110623.1850021-1-treapking@chromium.org
2024-07-23drm/bridge: tc358767: Add configurable default preemphasisMarek Vasut
Make the default DP port preemphasis configurable via new DT property "toshiba,pre-emphasis". This is useful in case the DP link properties are known and starting link training from preemphasis setting of 0 dB is not useful. The preemphasis can be set separately for both DP lanes in range 0=0dB, 1=3.5dB, 2=6dB . Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240708150130.54484-2-marex@denx.de
2024-07-19drm/bridge: analogix: remove unused struct 'bridge_init'Dr. David Alan Gilbert
commit 6a1688ae8794 ("drm/bridge: ptn3460: Convert to I2C driver model") has dropped all the users of the struct bridge_init from the exynos_dp_core, while retaining unused structure definition. Later on the driver was reworked and the definition migrated to the analogix_dp driver. Remove unused struct bridge_init definition. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240520125551.11534-1-linux@treblig.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-07-18Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "There's a lot of stuff in here, amd, i915 and xe have new platform work, lots of core rework around EDID handling, some new COMPILE_TEST options, maintainer changes and a lots of other stuff. Summary: core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro - Reduce Gaudi2 MSI-X interrupt count to 128 - Add Gaudi2-D revision support - Add timestamp to CPLD info - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error - Align Gaudi2 interrupt names - Check for errors after preboot is ready - Change habanalabs maintainer and git repo path mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates" * tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits) drm/amdgpu/mes12: add missing opcode string drm/amdgpu/mes11: update opcode strings Revert "drm/amd/display: Reset freesync config before update new state" drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB drm/xe: Drop trace_xe_hw_fence_free drm/xe/uapi: Rename xe perf layer as xe observation layer drm/amdgpu: remove exp hw support check for gfx12 drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed drm/amdgpu: flush all cached ras bad pages to eeprom drm/amdgpu: select compute ME engines dynamically drm/amd/display: Allow display DCC for DCN401 drm/amdgpu: select compute ME engines dynamically drm/amdgpu/job: Replace DRM_INFO/ERROR logging drm/amdgpu: select compute ME engines dynamically drm/amd/pm: Ignore initial value in smu response register drm/amdgpu: Initialize VF partition mode drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping MAINTAINERS: fix Xinhui's name MAINTAINERS: update powerplay and swsmu drm/qxl: Pin buffer objects for internal mappings ...
2024-07-08drm/bridge: adv7511: Fix Intermittent EDID failuresAdam Ford
In the process of adding support for shared IRQ pins, a scenario was accidentally created where adv7511_irq_process returned prematurely causing the EDID to fail randomly. Since the interrupt handler is broken up into two main helper functions, update both of them to treat the helper functions as IRQ handlers. These IRQ routines process their respective tasks as before, but if they determine that actual work was done, mark the respective IRQ status accordingly, and delay the check until everything has been processed. This should guarantee the helper functions don't return prematurely while still returning proper values of either IRQ_HANDLED or IRQ_NONE. Reported-by: Liu Ying <victor.liu@nxp.com> Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins") Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> V3: Remove unnecessary declaration of ret by evaluating the return code of regmap_read directly. V2: Fix uninitialized cec_status Cut back a little on error handling to return either IRQ_NONE or IRQ_HANDLED.
2024-07-05Merge v6.10-rc6 into drm-nextDaniel Vetter
The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-06-27drm/bridge: analogix_dp: handle AUX transfer timeoutsLucas Stach
Timeouts on the AUX bus are to be expected in certain normal operating conditions. There is no need to raise an error log or re-initialize the whole AUX state machine. Simply acknowledge the AUX_ERR interrupt and let upper layers know about the timeout. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-14-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: only read AUX status when an error occuredLucas Stach
All AUX error responses raise the AUX_ERR interrupt, so there is no need to read the AUX status register in normal operation. Only read the status when an error occurred and we can expect a different status than OK. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-13-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: simplify and correct PLL lock checksLucas Stach
Move the wait loop into its own function, so it doesn't need to be replicated in multiple locations. Also move the PLL lock checks between setting the link bandwidth, which may cause the PLL to unlock, and the MACRO_RST which needs the PLL to be locked. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-12-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: don't wait for PLL lock too earlyLucas Stach
The PLL will be reconfigured later, which may cause it to go out of lock anyway, so there is no point in waiting for the PLL to lock here. Instead we can continue execution of the link setup, which will properly set the PLL parameters and will wait for the PLL to lock at the appropriate times. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-11-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: move macro reset after link bandwidth settingLucas Stach
Setting the link bandwidth may change the PLL parameters, which will cause the PLL to go out of lock, so make sure to apply the MACRO_RST, which according to the comment is required to be pulsed after the PLL is locked. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-10-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: remove PLL lock check from analogix_dp_config_videoLucas Stach
This check is way too late in the DP enable flow. The PLL must be locked much earlier, before any link training can happen. If the PLL is unlocked at that point in time there is something seriously wrong in the enable flow. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Robet Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-9-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: move basic controller init into runtime PMLucas Stach
Make sure the controller is in a basic working state after runtime resume. Keep the analog function enable in the mode set path as this enables parts of the PHY that are only required to be powered when there is a data stream being sent out. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-8-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: move platform and PHY power handling into runtime PMLucas Stach
Platform and PHY power isn't only required when the actual display data stream is active, but may be required earlier to support AUX channel transactions. Move them into the runtime PM calls, so they are properly managed whenever various other parts of the driver need them to be active. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-7-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: remove clk handling from analogix_dp_set_bridgeLucas Stach
The clock is already managed by runtime PM, which is properly invoked from the analogix_dp_set_bridge function, so there is no need for an additional reference. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-6-l.stach@pengutronix.de
generated by cgit (git 2.34.1) at 2025-07-25 10:04:31 +0000