summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2017-03-10drm: bridge: dw-hdmi: Remove device type from platform dataKieran Bingham
The device type isn't used anymore now that workarounds and PHY-specific operations are performed based on version information read at runtime. Remove it. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-9-laurent.pinchart+renesas@ideasonboard.com
2017-03-10drm: bridge: dw-hdmi: Add support for custom PHY configurationKieran Bingham
The DWC HDMI TX controller interfaces with a companion PHY. While Synopsys provides multiple standard PHYs, SoC vendors can also integrate a custom PHY. Modularize PHY configuration to support vendor PHYs through platform data. The existing PHY configuration code was originally written to support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC MLP PHY. The HDMI 2.0 PHY will require a separate configuration function. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-8-laurent.pinchart+renesas@ideasonboard.com
2017-03-10drm: bridge: dw-hdmi: Create PHY operationsLaurent Pinchart
The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233615.11993-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-10drm: bridge: dw-hdmi: Fix the PHY power up sequenceLaurent Pinchart
When powering the PHY up we need to wait for the PLL to lock. This is done by polling the TX_PHY_LOCK bit in the HDMI_PHY_STAT0 register (interrupt-based wait could be implemented as well but is likely overkill). The bit is asserted when the PLL locks, but the current code incorrectly waits for the bit to be deasserted. Fix it, and while at it, replace the udelay() with a sleep as the code never runs in non-sleepable context. To be consistent with the power down implementation move the poll loop to the power off function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233557.11945-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-10drm: bridge: dw-hdmi: Fix the PHY power down sequenceLaurent Pinchart
The PHY requires us to wait for the PHY to switch to low power mode after deasserting TXPWRON and before asserting PDDQ in the power down sequence, otherwise power down will fail. The PHY power down can be monitored though the TX_READY bit, available through I2C in the PHY registers, or the TX_PHY_LOCK bit, available through the HDMI TX registers. As the two are equivalent, let's pick the easier solution of polling the TX_PHY_LOCK bit. The power down code is currently duplicated in multiple places. To avoid spreading multiple calls to a TX_PHY_LOCK poll function, we have to refactor the power down code and group it all in a single function. Tests showed that one poll iteration was enough for TX_PHY_LOCK to become low, without requiring any additional delay. Retrying the read five times with a 1ms to 2ms delay between each attempt should thus be more than enough. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233539.11898-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-10drm: bridge: dw-hdmi: Enable CSC even for DVINeil Armstrong
If the input pixel format is not RGB, the CSC must be enabled in order to provide valid pixel to DVI sinks. This patch removes the hdmi only dependency on the CSC enabling. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-4-laurent.pinchart+renesas@ideasonboard.com
2017-03-10drm: bridge: dw-hdmi: Move CSC configuration out of PHY codeLaurent Pinchart
The color space converter isn't part of the PHY, move its configuration out of PHY code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-3-laurent.pinchart+renesas@ideasonboard.com
2017-03-10drm: bridge: dw-hdmi: Remove unused functionsLaurent Pinchart
Most of the hdmi_phy_test_*() functions are unused. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Tested-by: Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-2-laurent.pinchart+renesas@ideasonboard.com
2017-03-06drm/bridge: analogix_dp: add helpers for capture of frame CRCsTomeu Vizoso
Add two simple functions that just take the drm_dp_aux from our struct and calls the corresponding DP helpers with it. v6: Pass to the DP helper the drm_crtc of the current connector (Sean Paul) Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303133936.14964-4-tomeu.vizoso@collabora.com
2017-03-05drm: bridge: lvds-encoder: Add thine,thc63lvdm83d compatible stringLaurent Pinchart
The THC63LVDM83D is a transparent LVDS encoder. Unlike dumb LVDS encoders it can be controlled through a few pins (power down, LVDS swing, clock edge selection) and requires power supplies. However, on several boards where the device is used neither the control pins nor the power supply are controllable. To avoid developing a separate device-specific driver add a "thine,thc63lvdm83d" compatible entry to the lvds-encoder driver. This will allow supporting many THC63LVDM83D-based boards easily, while allowing future development of an thc63lvdm83d driver when needed without breaking backward compatibility. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-5-laurent.pinchart+renesas@ideasonboard.com
2017-03-05drm: bridge: vga-dac: Add adi,adv7123 compatible stringLaurent Pinchart
The ADV7123 is a transparent VGA DAC. Unlike dumb VGA DACs it can be controlled through a power save pin, and requires a power supply. However, on most boards where the device is used neither the power save signal nor the power supply are controllable. To avoid developing a separate device-specific driver add an "adi,adv7123" compatible entry to the dumb-vga-dac driver. This will allow supporting most ADV7123-based boards easily, while allowing future development of an adv7123 driver when needed without breaking backward compatibility. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-4-laurent.pinchart+renesas@ideasonboard.com
2017-03-05drm: bridge: Add LVDS encoder driverLaurent Pinchart
The LVDS encoder driver is a DRM bridge driver that supports the parallel to LVDS encoders that don't require any configuration. The driver thus doesn't interact with the device, but creates an LVDS connector for the panel and exposes its size and timing based on information retrieved from DT. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-3-laurent.pinchart+renesas@ideasonboard.com
2017-03-05drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)Peter Senna Tschudin
The video processing pipeline on the second output on the GE B850v3: Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output Each bridge has a dedicated flash containing firmware for supporting the custom design. The result is that in this design neither the STDP4028 nor the STDP2690 behave as the stock bridges would. The compatible strings include the suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with the firmware which is specific for the GE B850v3. The driver is powerless to control the video processing pipeline, as the two bridges behaves as a single one. The driver is only needed for telling the host about EDID / HPD, and for giving the host powers to ack interrupts. This driver adds one i2c_device for each bridge, but only one drm_bridge. This design allows the creation of a functional connector that is capable of reading EDID from the STDP2690 while handling interrupts on the STDP4028. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: David Airlie <airlied@linux.ie> Cc: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Enric Balletbo <enric.balletbo@collabora.com> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/ad92919f2eaff2623a551aac94cf11ef948ff9ee.1488555615.git.peter.senna@collabora.com
2017-02-23drm/bridge/sii8620: add missing error handling in probeAndrzej Hajda
devm_request_threaded_irq result should be checked for errors. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1487764057-23362-1-git-send-email-a.hajda@samsung.com
2017-02-13drm/bridge/tfp410: Make symbol tfp410_platform_driver staticWei Yongjun
Fixes the following sparse warning: drivers/gpu/drm/bridge/ti-tfp410.c:223:24: warning: symbol 'tfp410_platform_driver' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170209152549.30711-1-weiyj.lk@gmail.com
2017-02-02drm/bridge/sii8620: enable interlace modesAndrzej Hajda
Bug in DECON(CRTC) driver prevented interlace modes from proper work. Since DECON is fixed interlace modes can be enabled in MHL. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-26-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: enable MHL3 mode if possibleAndrzej Hajda
Since all sub-protocols of MHL3 are already supported MHL3 mode can be enabled. With this patch it is possible to use packed pixel modes and clocks up to 300MHz - 1920x1080@60Hz and 4K modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-25-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add HSIC initialization codeAndrzej Hajda
In case of MHL3 HSIC should be initialized. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-24-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: improve gen2 write burst IRQ routineAndrzej Hajda
The patch adds code to report back feature complete IRQ, and code to read and drop burst writes from peer. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-23-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: send EMSC features on requestAndrzej Hajda
Device should report to the peer which features are really supported. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-22-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: rewrite hdmi start sequenceAndrzej Hajda
MHL3 protocol requires registry adjustments depending on chosen video mode. Necessary information is gathered in mode_fixup callback. In case of HDMI video modes driver should also send special AVI and MHL3 infoframes. The patch introduces generic helpers for handling MHL3 infoframes, in case of appearance of other users of MHL3 infoframes these function can be moved to common library. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-21-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix disconnect sequenceAndrzej Hajda
The patch allows to avoid rare cases when discovery fails. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-19-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: split EDID read and write codeAndrzej Hajda
MHL3 requires that after reading EDID from the sink source should ask peer for features. To make both protocols happy the patch splits the code accordingly. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-18-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add delay during cbus resetAndrzej Hajda
Without delay CBUS sometimes was not reset properly. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-17-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: do not stop MHL output when TMDS input is stoppedAndrzej Hajda
Stopping output causes full re-detection of the sink and slows down the process. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-16-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: set gen2 write burst before sending MSC commandAndrzej Hajda
Write burst should be enabled for MHL_INT_RC_FEAT_REQ and disabled for other commands. The patch moves functions up and adds delay setting for MHL3 burst mode. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-15-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: abstract out sink detection codeAndrzej Hajda
MHL1 and MHL3 have different initialization paths. To make both protocols happy sink detection is put into continuation after link mode enablement. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-14-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix initialization sequence for MHL2 receiversAndrzej Hajda
MHL2 receiver require disabling transmitter on initialization. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-13-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix MSC message removalAndrzej Hajda
Messages queue can be cleaned up by message callbacks, to avoid repeated removal of current message it should be removed from the queue before calling these callbacks. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-12-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: remove spare CBUS bring-up sequenceAndrzej Hajda
In case of MHL3 CBUS is bring-up already in sii8620_got_ecbus_speed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-11-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix peer device capabilities read codeAndrzej Hajda
Peer capabilities should be read differently depending on protocol version. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-10-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: respond to feature requestsAndrzej Hajda
MHL3 protocol requires device to respond to feature request from peer. This minimal answer fulfills the requirement and allows to continue negotiation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-9-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add support for burst eMSC transmissionsAndrzej Hajda
Burst transmissions are used in MHL3 mode negotiation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-8-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: initial support for eCBUS-S modeAndrzej Hajda
The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex bidirectional traffic for three channels: - CBUS data (CBUS1 channel), - High-bandwidth MHL data (eMSC channel), - tunneling data (T-CBUS channel). It is required to fully support MHL3 dongles. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-6-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add continuations to messagesAndrzej Hajda
Due to asynchronous nature of MHL flow of execution is dispersed. Logical continuation of some actions happens after response of peer, i.e in interrupt handler. To simplify coding continuation mechanism has been added - it is now possible to provide continuation callback, which will be called after peer responds to given action. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-5-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add reading device capability registersAndrzej Hajda
This functionality is necessary to implement MHL3 modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-4-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add MHL3 mode check helperAndrzej Hajda
MHL3 modes differs significantly from MHL1 mode, this helper will be used frequently to clearly distinguish them. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-3-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: simplify MHL3 mode settingAndrzej Hajda
It is not necessary to set REG_COC_CTL0, REG_MHL_COC_CTL1 registers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-2-git-send-email-a.hajda@samsung.com
2017-02-01Merge tag 'drm-misc-next-2017-01-30' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Another round of -misc stuff: - Noralf debugfs cleanup cleanup (not yet everything, some more driver patches awaiting acks). - More doc work. - edid/infoframe fixes from Ville. - misc 1-patch fixes all over, as usual Noralf needs this for his tinydrm pull request. * tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) drm/vc4: Remove vc4_debugfs_cleanup() dma/fence: Export enable-signaling tracepoint for emission by drivers drm/tilcdc: Remove tilcdc_debugfs_cleanup() drm/tegra: Remove tegra_debugfs_cleanup() drm/sti: Remove drm_debugfs_remove_files() calls drm/radeon: Remove drm_debugfs_remove_files() call drm/omap: Remove omap_debugfs_cleanup() drm/hdlcd: Remove hdlcd_debugfs_cleanup() drm/etnaviv: Remove etnaviv_debugfs_cleanup() drm/etnaviv: allow build with COMPILE_TEST drm/amd/amdgpu: Remove drm_debugfs_remove_files() call drm/prime: Clarify DMA-BUF/GEM Object lifetime drm/ttm: Make sure BOs being swapped out are cacheable drm/atomic: Remove drm_atomic_debugfs_cleanup() drm: drm_minor_register(): Clean up debugfs on failure drm: debugfs: Remove all files automatically on cleanup drm/fourcc: add vivante tiled layout format modifiers drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F drm/edid: Set AVI infoframe Q even when QS=0 drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range() ...
2017-01-27Merge tag 'drm-misc-next-2017-01-23' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next - cleanups&fixes for dw-hdmi bride driver (Laurent) - updates for adv bridge driver (John Stultz) for nexus - drm_crtc_from_index helper rollout (Shawn Guo) - removing drm_framebuffer_unregister_private from drivers&core - target_vblank (Andrey Grodzovsky) - misc tiny stuff * tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits) drm: qxl: Open code teardown function for qxl drm: qxl: Open code probing sequence for qxl drm/bridge: adv7511: Re-write the i2c address before EDID probing drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event() drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context drm: vc4: use crtc helper drm_crtc_from_index() drm: tegra: use crtc helper drm_crtc_from_index() drm: nouveau: use crtc helper drm_crtc_from_index() drm: mediatek: use crtc helper drm_crtc_from_index() drm: kirin: use crtc helper drm_crtc_from_index() drm: exynos: use crtc helper drm_crtc_from_index() dt-bindings: display: dw-hdmi: Clean up DT bindings documentation drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY drm: bridge: dw-hdmi: Fix the name of the PHY reset macros drm: bridge: dw-hdmi: Define and use macros for PHY register addresses drm: bridge: dw-hdmi: Detect PHY type at runtime drm: bridge: dw-hdmi: Handle overflow workaround based on device version ...
2017-01-27Merge branch 'master' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus master to get the connector locking revert. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits) sysctl: fix proc_doulongvec_ms_jiffies_minmax() Revert "drm/probe-helpers: Drop locking from poll_enable" MAINTAINERS: add Dan Streetman to zbud maintainers MAINTAINERS: add Dan Streetman to zswap maintainers mm: do not export ioremap_page_range symbol for external module mn10300: fix build error of missing fpu_save() romfs: use different way to generate fsid for BLOCK or MTD frv: add missing atomic64 operations mm, page_alloc: fix premature OOM when racing with cpuset mems update mm, page_alloc: move cpuset seqcount checking to slowpath mm, page_alloc: fix fast-path race with cpuset update or removal mm, page_alloc: fix check for NULL preferred_zone kernel/panic.c: add missing \n fbdev: color map copying bounds checking frv: add atomic64_add_unless() mm/mempolicy.c: do not put mempolicy before using its nodemask radix-tree: fix private list warnings Documentation/filesystems/proc.txt: add VmPin mm, memcg: do not retry precharge charges proc: add a schedule point in proc_pid_readdir() ...
2017-01-24drm: bridge: dw-hdmi: fix building without CONFIG_OFArnd Bergmann
The of_node member in struct drm_bridge is hidden when CONFIG_OF is disabled, causing a build error: drivers/gpu/drm/bridge/dw-hdmi.c: In function '__dw_hdmi_probe': drivers/gpu/drm/bridge/dw-hdmi.c:2063:14: error: 'struct drm_bridge' has no member named 'of_node' We could fix this either using a Kconfig dependency on CONFIG_OF or making the one line conditional. The latter gives us better compile test coverage, so this is what I'm doing here. Fixes: 69497eb9234e ("drm: bridge: dw-hdmi: Implement DRM bridge registration") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170123122312.3290934-1-arnd@arndb.de
2017-01-19drm/bridge: adv7511: Re-write the i2c address before EDID probingJohn Stultz
I've found that by just turning the chip on and off via the POWER_DOWN register, I end up getting i2c_transfer errors on HiKey. Investigating further, it turns out that some of the register state in hardware is getting lost, as the device registers are reset when the chip is powered down. Thus this patch simply re-writes the i2c address to the ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set before we try to read the EDID data. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
2017-01-19drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDIDJohn Stultz
Thus this patch changes the EDID probing logic so that we re-use the __adv7511_power_on/off() calls instead of duplciating logic. This does change behavior slightly as it adds the HPD signal pulse to the EDID probe path, but Archit has had a patch to add HPD signal pulse to the EDID probe path before, so this should address the cases where that helped. Another difference is that regcache_mark_dirty() is also called in the power off path once EDID is probed. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org
2017-01-19drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused ↵John Stultz
internally In chasing down issues with EDID probing, I found some duplicated but incomplete logic used to power the chip on and off. This patch refactors the adv7511_power_on/off functions, so they can be used for internal needs. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-5-git-send-email-john.stultz@linaro.org
2017-01-19drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve ↵Archit Taneja
monitor detection On some adv7511 implementations, we can get some spurious disconnect signals which can cause monitor probing to fail. This patch enables HPD (hot plug detect) interrupt support which allows the monitor to be properly re-initialized when the spurious disconnect signal goes away. This also enables proper hotplug support. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Originally-by: Archit Taneja <architt@codeaurora.org> [jstultz: Added proper commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-4-git-send-email-john.stultz@linaro.org
2017-01-19drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()John Stultz
In chasing down a previous issue with EDID probing from calling drm_helper_hpd_irq_event() from irq context, Laurent noticed that the DRM documentation suggests that drm_kms_helper_hotplug_event() should be used instead. Thus this patch replaces drm_helper_hpd_irq_event() with drm_kms_helper_hotplug_event(), which requires we update the connector.status entry and only call _hotplug_event() when the status changes. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org
2017-01-19drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq ↵John Stultz
context I was recently seeing issues with EDID probing, where the logic to wait for the EDID read bit to be set by the IRQ wasn't happening and the code would time out and fail. Digging deeper, I found this was due to the fact that IRQs were disabled as we were running in IRQ context from the HPD signal. Thus this patch changes the logic to handle the HPD signal via a work_struct so we can be out of irq context. With this patch, the EDID probing on hotplug does not time out. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org
2017-01-18drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHYLaurent Pinchart
According to the PHY IP core vendor, the SVSRET signal must be asserted before resetting the PHY. Tests on RK3288 and R-Car Gen3 showed no regression, the change should thus be safe. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-20-laurent.pinchart+renesas@ideasonboard.com
2017-01-18drm: bridge: dw-hdmi: Fix the name of the PHY reset macrosLaurent Pinchart
The PHY reset signal is controlled by bit PHYRSTZ in the MC_PHYRSTZ register. The signal is active low on Gen1 PHYs and active high on Gen2 PHYs. The driver toggles the signal high then low, which is correct for all currently supported platforms, but the register values macros are incorrectly named. Replace them with a single macro named after the bit, and add a comment to the source code to explain the behaviour. The driver's behaviour isn't changed by this rename, the code will still need to be fixed to support Gen1 PHYs. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-19-laurent.pinchart+renesas@ideasonboard.com
generated by cgit (git 2.34.1) at 2025-09-19 07:16:34 +0000