summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2023-05-26drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHYAdam Ford
In order to support variable DPHY timings, it's necessary to enable GENERIC_PHY_MIPI_DPHY so phy_mipi_dphy_get_default_config can be used to determine the nominal values for a given resolution and refresh rate. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-5-aford173@gmail.com
2023-05-26drm: bridge: samsung-dsim: Fetch pll-clock-frequency automaticallyAdam Ford
Make the pll-clock-frequency optional. If it's present, use it to maintain backwards compatibility with existing hardware. If it is absent, read clock rate of "sclk_mipi" to determine the rate. Since it can be optional, change the message from an error to dev_info. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-4-aford173@gmail.com
2023-05-26drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]Adam Ford
According to Table 13-45 of the i.MX8M Mini Reference Manual, the min and max values for M and the frequency range for the VCO_out calculator were incorrect. This information was contradicted in other parts of the mini, nano and plus manuals. After reaching out to my NXP Rep, when confronting him about discrepencies in the Nano manual, he responded with: "Yes it is definitely wrong, the one that is part of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P, PMS_M and PMS_S is not correct. I will report this to Doc team, the one customer should be take into account is the Table 13-40 DPHY PLL Parameters and the Note above." These updated values also match what is used in the NXP downstream kernel. To fix this, make new variables to hold the min and max values of m and the minimum value of VCO_out, and update the PMS calculator to use these new variables instead of using hard-coded values to keep the backwards compatibility with other parts using this driver. Fixes: 4d562c70c4dc ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-3-aford173@gmail.com
2023-05-26drm: bridge: samsung-dsim: fix blanking packet size calculationLucas Stach
Scale the blanking packet sizes to match the ratio between HS clock and DPI interface clock. The controller seems to do internal scaling to the number of active lanes, so we don't take those into account. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230526030559.326566-2-aford173@gmail.com
2023-05-25drm/bridge: ti-sn65dsi83: Fix enable/disable flow to meet specFrieder Schrempf
The datasheet describes the following initialization flow including minimum delay times between each step: 1. DSI data lanes need to be in LP-11 and the clock lane in HS mode 2. toggle EN signal 3. initialize registers 4. enable PLL 5. soft reset 6. enable DSI stream 7. check error status register To meet this requirement we need to make sure the host bridge's pre_enable() is called first by using the pre_enable_prev_first flag. Furthermore we need to split enable() into pre_enable() which covers steps 2-5 from above and enable() which covers step 7 and is called after the host bridge's enable(). Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> #TQMa8MxML/MBa8Mx Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230503163313.2640898-3-frieder@fris.de
2023-05-25drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet specFrieder Schrempf
According to the documentation [1] the proper enable flow is: 1. Enable DSI link and keep data lanes in LP-11 (stop state) 2. Disable stop state to bring data lanes into HS mode Currently we do this all at once within enable(), which doesn't allow to meet the requirements of some downstream bridges. To fix this we now enable the DSI in pre_enable() and force it into stop state using the FORCE_STOP_STATE bit in the ESCMODE register until enable() is called where we reset the bit. We currently do this only for i.MX8M as Exynos uses a different init flow where samsung_dsim_init() is called from samsung_dsim_host_transfer(). [1] https://docs.kernel.org/gpu/drm-kms-helpers.html#mipi-dsi-bridge-operation Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> #TQMa8MxML/MBa8Mx Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230503163313.2640898-2-frieder@fris.de
2023-05-25drm/bridge: tc358767: explicitly set readable registersAlexander Stein
This map was created from register map from datasheet (section 5.1.2). Unused registers are stated by address, so they show up in debugfs as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230516071949.375264-1-alexander.stein@ew.tq-group.com
2023-05-23drm/bridge: dw-hdmi: Replace all non-returning strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230522155210.2336690-1-azeemshaikh38@gmail.com
2023-05-23drm/bridge: anx7625: Prevent endless probe loopNícolas F. R. A. Prado
During probe, the driver registers i2c dummy devices and populates the aux bus, which registers a device for the panel. After doing that, the driver can still defer probe if needed. This ordering of operations is troublesome however, because the deferred probe work will retry probing all pending devices every time a new device is registered. Therefore, if modules need to be loaded in order to satisfy the dependencies for this driver to complete probe, the kernel will stall, since it'll keep trying to probe the anx7625 driver, but never succeed, given that modules would only be loaded after the deferred probe work completes. Two changes are required to avoid this issue: * Move of_find_mipi_dsi_host_by_node(), which can defer probe, to before anx7625_register_i2c_dummy_clients() and devm_of_dp_aux_populate_ep_devices(), which register devices. * Make use of the done_probing callback when populating the aux bus, so that the bridge registration is only done after the panel is probed. This is required because the panel might need to defer probe, but the aux bus population needs the i2c dummy devices working, so this call couldn't just be moved to an earlier point in probe. One caveat is that if the panel is described outside the aux bus, the probe loop issue can still happen, but we don't have a way to avoid it in that case since there's no callback available. With this patch applied, it's possible to boot on mt8192-asurada-spherion with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=m CONFIG_BACKLIGHT_PWM=y and also with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=y CONFIG_BACKLIGHT_PWM=m Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel") Fixes: 269332997a16 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230518193902.891121-1-nfraprado@collabora.com
2023-05-22drm: bridge: samsung-dsim: Implement support for clock/data polarity swapMarek Vasut
Implement support for DSI clock and data lane DN/DP polarity swap by means of decoding 'lane-polarities' DT property. The controller does support DN/DP swap of clock lane and all data lanes, the controller does not support polarity swap of individual data lane bundles, add a check which verifies all data lanes have the same polarity. This has been validated on an imx8mm board that actually has the MIPI DSI clock lanes inverted. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230514114625.98372-2-festevam@gmail.com
2023-05-17drm/bridge: tc358767: Switch to devm MIPI-DSI helpersAlexander Stein
DSI device registering and attaching needs to be undone upon deregistration. This fixes module unload/load. Fixes: bbfd3190b656 ("drm/bridge: tc358767: Add DSI-to-DPI mode support") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230517122107.1766673-1-alexander.stein@ew.tq-group.com
2023-05-16drm/bridge: tc358768: remove unneeded semicolonFrancesco Dolcini
Remove unneeded stray semicolon. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305152341.oiSjRpv6-lkp@intel.com/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230515184408.9421-1-francesco@dolcini.it
2023-05-16gpu: drm: bridge: No need to set device_driver ownerAnup Sharma
There is no need to exclusively set the .owner member of the struct device_driver when defining the platform_driver struct. The Linux core takes care of setting the .owner member as part of the call to module_platform_driver() helper function. Issue identified using the platform_no_drv_owner.cocci Coccinelle semantic patch as: drivers/gpu/drm/bridge/samsung-dsim.c:1957:6-11: No need to set .owner here. The core will do it. No functional changes are intended. Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/ZF9igb/nvL6GRBsq@yoga
2023-05-06drm/bridge: lt9611: Do not generate HFP/HBP/HSA and EOT packetMarek Vasut
Do not generate the HS front and back porch gaps, the HSA gap and EOT packet, as these packets are not required. This makes the bridge work with Samsung DSIM on i.MX8MM and i.MX8MP. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230403221233.500485-2-marex@denx.de
2023-05-06drm/bridge: lt9211: Do not generate HFP/HBP/HSA and EOT packetMarek Vasut
Do not generate the HS front and back porch gaps, the HSA gap and EOT packet, as these packets are not required. This makes the bridge work with Samsung DSIM on i.MX8MM and i.MX8MP. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230403221233.500485-1-marex@denx.de
2023-05-05drm/bridge: tc358768: remove unused variableFrancesco Dolcini
Remove the unused phy_delay_nsk variable, before it was wrongly used to compute some register value, the fixed computation is no longer using it and therefore can be removed. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-10-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: fix THS_TRAILCNT computationFrancesco Dolcini
Correct computation of THS_TRAILCNT register. This register must be set to a value that ensure that THS_TRAIL > 60 ns + 4 x UI and THS_TRAIL > 8 x UI and THS_TRAIL < TEOT with TEOT = 105 ns + (12 x UI) with the actual value of THS_TRAIL being (1 + THS_TRAILCNT) x ByteClk cycle + ((1 to 2) + 2) xHSBYTECLK cycle + - (PHY output delay) with PHY output delay being about (8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-9-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: fix TXTAGOCNT computationFrancesco Dolcini
Correct computation of TXTAGOCNT register. This register must be set to a value that ensure that the TTA-GO period = (4 x TLPX) with the actual value of TTA-GO being 4 x (TXTAGOCNT + 1) x (HSByteClk cycle) Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-8-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: fix THS_ZEROCNT computationFrancesco Dolcini
Correct computation of THS_ZEROCNT register. This register must be set to a value that ensure that THS_PREPARE + THS_ZERO > 145ns + 10*UI with the actual value of (THS_PREPARE + THS_ZERO) being ((1 to 2) + 1 + (TCLK_ZEROCNT + 1) + (3 to 4)) x ByteClk cycle + + HSByteClk x (2 + (1 to 2)) + (PHY delay) with PHY delay being about (8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-7-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: fix TCLK_TRAILCNT computationFrancesco Dolcini
Correct computation of TCLK_TRAILCNT register. The driver does not implement non-continuous clock mode, so the actual value doesn't make a practical difference yet. However this change also ensures that the value does not write to reserved registers bits in case of under/overflow. This register must be set to a value that ensures that TCLK-TRAIL > 60ns and TEOT <= (105 ns + 12 x UI) with the actual value of TCLK-TRAIL being (TCLK_TRAILCNT + (1 to 2)) xHSByteClkCycle + (2 + (1 to 2)) * HSBYTECLKCycle - (PHY output delay) with PHY output delay being about (2 to 3) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: fix TCLK_ZEROCNT computationFrancesco Dolcini
Correct computation of TCLK_ZEROCNT register. This register must be set to a value that ensure that (TCLK-PREPARECNT + TCLK-ZERO) > 300ns with the actual value of (TCLK-PREPARECNT + TCLK-ZERO) being (1 to 2) + (TCLK_ZEROCNT + 1)) x HSByteClkCycle + (PHY output delay) with PHY output delay being about (2 to 3) x MIPIBitClk cycle in the BitClk conversion. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: fix PLL target frequencyFrancesco Dolcini
Correctly compute the PLL target frequency, the current formula works correctly only when the input bus width is 24bit, actually to properly compute the PLL target frequency what is relevant is the bits-per-pixel on the DSI link. No regression expected since the DSI format is currently hard-coded as MIPI_DSI_FMT_RGB888. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: fix PLL parameters computationFrancesco Dolcini
According to Toshiba documentation the PLL input clock after the divider should be not less than 4MHz, fix the PLL parameters computation accordingly. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
2023-05-05drm/bridge: tc358768: always enable HS video modeFrancesco Dolcini
Always enable HS video mode setting the TXMD bit, without this change no video output is present with DSI sinks that are setting MIPI_DSI_MODE_LPM flag (tested with LT8912B DSI-HDMI bridge). Previously the driver was enabling HS mode only when the DSI sink was not explicitly setting the MIPI_DSI_MODE_LPM, however this is not correct. The MIPI_DSI_MODE_LPM is supposed to indicate that the sink is willing to receive data in low power mode, however clearing the TC358768_DSI_CONTROL_TXMD bit will make the TC358768 send video in LP mode that is not the intended behavior. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
2023-05-04drm/bridge: ti-sn65dsi83: Fix enable error pathAlexander Stein
If PLL locking failed, the regulator needs to be disabled again. Fixes: 5664e3c907e2 ("drm/bridge: ti-sn65dsi83: Add vcc supply regulator support") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230504065316.2640739-1-alexander.stein@ew.tq-group.com
2023-04-28drm/bridge: it6505: Move a variable assignment behind a null pointer check ↵Markus Elfring
in receive_timing_debugfs_show() The address of a data structure member was determined before a corresponding null pointer check in the implementation of the function “receive_timing_debugfs_show”. Thus avoid the risk for undefined behaviour by moving the assignment for the variable “vid” behind the null pointer check. This issue was detected by using the Coccinelle software. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Link: https://patchwork.freedesktop.org/patch/msgid/fa69384f-1485-142b-c4ee-3df54ac68a89@web.de Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org>
2023-04-25drm/bridge: tc358768: Add atomic_get_input_bus_fmts() implementationFrancesco Dolcini
Add atomic_get_input_bus_fmts() implementation, tc358768 has a parallel RGB input interface with the actual bus format depending on the amount of parallel input data lines. Without this change when the tc358768 is used with less than 24bit the color mapping is completely wrong. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230330095941.428122-7-francesco@dolcini.it
2023-04-22drm/bridge: anx7625: Drop of_gpio headerMaíra Canal
This driver includes the deprecated OF GPIO header <linux/of_gpio.h> yet fail to use symbols from it, so drop the include. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220812205746.609107-2-mairacanal@riseup.net
2023-04-20drm/bridge: ti-sn65dsi86: Implement wait_hpd_assertedNikita Travkin
This bridge doesn't actually implement HPD due to it being way too slow but instead expects the panel driver to wait enough to assume HPD is asserted. However some panels (such as the generic 'edp-panel') expect the bridge to deal with the delay and pass maximum delay to the aux instead. In order to support such panels, add a dummy implementation of wait that would just sleep the maximum delay and assume no failure has happened. Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230408082014.235425-1-nikita@trvn.ru
2023-04-16Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging drm-next to sync with msm tree. Resolves a conflict between aperture-helper changes and msm's use of those interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-04-14drm/bridge: fsl-ldb: Add i.MX6SX supportFabio Estevam
i.MX6SX has a single LVDS port and share a similar LDB_CTRL register layout with i.MX8MP and i.MX93. There is no LVDS CTRL register on the i.MX6SX, so only write to this register on the appropriate SoCs. Add support for the i.MX6SX LDB. Tested on a imx6sx-sdb board with a Hannstar HSD100PXN1 LVDS panel and also on a custom i.MX6SX-based board. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230404020129.509356-2-festevam@gmail.com
2023-04-11Merge tag 'drm-msm-next-2023-04-10' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/msm into drm-next main pull request for v6.4 Core Display: ============ * Bugfixes for error handling during probe * rework UBWC decoder programming * prepare_commit cleanup * bindings for SM8550 (MDSS, DPU), SM8450 (DP) * timeout calculation fixup * atomic: use drm_crtc_next_vblank_start() instead of our own custom thing to calculate the start of next vblank DP: == * interrupts cleanup DPU: === * DSPP sub-block flush on sc7280 * support AR30 in addition to XR30 format * Allow using REC_0 and REC_1 to handle wide (4k) RGB planes * Split the HW catalog into individual per-SoC files DSI: === * rework DSI instance ID detection on obscure platforms GPU: === * uapi C++ compatibility fix * a6xx: More robust gdsc reset * a3xx and a4xx devfreq support * update generated headers * various cleanups and fixes * GPU and GEM updates to avoid allocations which could trigger reclaim (shrinker) in fence signaling path * dma-fence deadline hint support and wait-boost * a640 speedbin support * a650 speedbin support Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c: Conflict between the 7fa5047a436b ("drm: Use of_property_present() for testing DT property presence") and 9f251f934012 ("drm/msm/adreno: Use OPP for every GPU generation"). The latter removed the of_ function call outright, so I went with what's in the PR unchanged. From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2023-04-06drm/scdc-helper: Pimp SCDC debugsVille Syrjälä
Include the device and connector information in the SCDC debugs. Makes it easier to figure out who did what. v2: Rely on connector->ddc (Maxime) Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: intel-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Thierry Reding <treding@nvidia.com>
2023-04-05drm/bridge: ti-sn65dsi86: Allow GPIO operations to sleepAlexander Stein
There is no need to require non-sleeping GPIO access. Silence the WARN_ON() if GPIO is using e.g. I2C expanders. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405135127.769665-1-alexander.stein@ew.tq-group.com
2023-04-05drm/bridge: ps8640: Use constant sleep time for polling hpdPin-yen Lin
The default hpd_wait_us in panel_edp.c is 2 seconds. This makes the sleep time in the polling of _ps8640_wait_hpd_asserted become 200ms. Change it to a constant 20ms to speed up the function. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230331030204.1179524-1-treapking@chromium.org
2023-04-05drm/bridge: ti-sn65dsi83: Do not generate HFP/HBP/HSA and EOT packetMarek Vasut
Do not generate the HS front and back porch gaps, the HSA gap and EOT packet, as per "SN65DSI83 datasheet SLLSEC1I - SEPTEMBER 2012 - REVISED OCTOBER 2020", page 22, these packets are not required. This makes the TI SN65DSI83 bridge work with Samsung DSIM on i.MX8MN. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230403190242.224490-1-marex@denx.de
2023-04-05drm: bridge: ldb: add support for using channel 1 onlyLuca Ceresoli
The LDB driver currently checks whether dual mode is used, otherwise it assumes only channel 0 is in use. Add support for using only channel 1. In device tree terms, this means linking port 2 only. Doing this cleanly requires changing the logic of the probe functions from this: 1. use of_graph_get_remote_node() on port 1 to find the panel 2. use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode to this: 1. use of_graph_get_remote_node() twice to find remote ports 2. reuse the result of the above to know whether each channel is enabled and to find the panel 3. if (both channels as enabled) use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode Also add a dev_dbg() to log the detected mode and log an error in case no panel was found (no channel enabled). Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405081058.2347130-2-luca.ceresoli@bootlin.com
2023-04-05drm: bridge: ldb: add missing \n in dev_warn() stringLuca Ceresoli
dev_warn() and similar require a training \n. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405081058.2347130-1-luca.ceresoli@bootlin.com
2023-04-05drm/bridge: ti-sn65dsi83: use dev_err_probe if host attach failedAlexander Stein
There might be cases where the host attach is deferred, use dev_err_probe to add more detailed information to /sys/kernel/debug/devices_deferred. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230405075223.579461-1-alexander.stein@ew.tq-group.com
2023-04-03drm/bridge: tc358767: Enable DSI burst mode, LPM, non-continuous clockMarek Vasut
The TC358767/TC358867/TC9595 are capable of DSI burst mode, which is more energy efficient than the non-burst modes. Make use of it. The TC358767/TC358867/TC9595 are capable of DSI non-continuous clock, since it sources the internal PLL clock from external clock source. The DSI non-continuous clock further reduces power utilization. The TC358767/TC358867/TC9595 may use DSI LPM for command transmissions, make sure this is configured correctly in the DSI mode flags. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003632.406468-1-marex@denx.de
2023-04-03drm/bridge: lt8912b: Fix DSI Video ModeFrancesco Dolcini
LT8912 DSI port supports only Non-Burst mode video operation with Sync Events and continuous clock on clock lane, correct dsi mode flags according to that removing MIPI_DSI_MODE_VIDEO_BURST flag. Cc: <stable@vger.kernel.org> Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it
2023-03-30drm: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20230310144706.1542295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-30Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
Backmerge to get rc4. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2023-03-29Merge v6.3-rc4 into drm-nextDaniel Vetter
I just landed the fence deadline PR from Rob that a bunch of drivers want/need to apply driver-specific patches. Backmerge -rc4 so that they don't have to be stuck on -rc2 for no reason at all. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-03-28drm: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Liu Ying <victor.liu@nxp.com> # i.MX bridge Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20230310144705.1542207-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-28drm: bridge: samsung-dsim: Add i.MX8M Plus supportMarek Vasut
Add extras to support i.MX8M Plus. The main change is the removal of HS/VS/DE signal inversion in the LCDIFv3-DSIM glue logic, otherwise the implementation of this IP in i.MX8M Plus is very much compatible with the i.MX8M Mini/Nano one. Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <m.szyprowski@samsung.com>
2023-03-28drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano supportJagan Teki
Samsung MIPI DSIM master can also be found in i.MX8M Mini/Nano SoC. Add compatible and associated driver_data for it. Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-03-28drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridgeJagan Teki
Samsung MIPI DSIM controller is common DSI IP that can be used in various SoCs like Exynos, i.MX8M Mini/Nano. In order to access this DSI controller between various platform SoCs, the ideal way to incorporate this in the drm stack is via the drm bridge driver. We already have a consolidated code for supporting component and bridge based DRM drivers, so keep the exynos component based code in existing exynos_drm_dsi.c and move generic bridge code as part of samsung-dsim.c Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-03-27drm/bridge: it6505: Add range and selector_regHsin-Yi Wang
There are 2 banks on it6505, and when writing to different bank, REG_BANK_SEL needs to be set to the targeted bank. The current code set this additionally, which causes a race condition when a process is writing bank 0 registers while another process set the bank to 1. Set ranges in regmap config so the regmap API would handle the bank changes. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230327044804.3657551-1-hsinyi@chromium.org
2023-03-24drm/bridge: ps8640: Return NULL immediately when EDID read failPin-yen Lin
drm_edid_read returns NULL on error, so feeding it directly into drm_edid_duplicate may lead to NULL pointer dereference. Add a check to guard this. Fixes: 6a17b4d1b52f ("drm/bridge: ps8640: Add a cache for EDID") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230324035909.1727356-1-treapking@chromium.org
generated by cgit (git 2.34.1) at 2025-04-22 18:56:17 +0000