summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2019-10-10drm/bridge: tc358767: fix max_tu_symbol valueTomi Valkeinen
max_tu_symbol was programmed to TU_SIZE_RECOMMENDED - 1, which is not what the spec says. The spec says: roundup ((input active video bandwidth in bytes/output active video bandwidth in bytes) * tu_size) It is not quite clear what the above means, but calculating max_tu_symbol = (input Bps / output Bps) * tu_size seems to work and fixes the issues seen. This fixes artifacts in some videomodes (e.g. 1024x768@60 on 2-lanes & 1.62Gbps was pretty bad for me). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190924131702.9988-1-tomi.valkeinen@ti.com
2019-09-27Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Fixes built up over the past 1.5 weeks or so, it's two weeks of amdgpu, some core cleanups and some panfrost fixes. I also finally figured out why my desktop was slow to do a bunch of stuff (someone gave it an IPv6 address which can't reach anything!). core: - Some cleanups and fixes in the self-refresh helpers - Some cleanups and fixes in the atomic helpers amdgpu: - Fix a 64 bit divide - Prevent a memory leak in a failure case in dc - Load proper gfx firmware on navi14 variants - Add more navi12 and navi14 PCI ids - Misc fixes for renoir - Fix bandwidth issues with multiple displays on vega20 - Support for Dali - Fix a possible oops with KFD on hawaii - Fix for backlight level after resume on some APUs - Other misc fixes panfrost: - Multiple panfrost fixes for regulator support and page fault handling" * tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: prevent memory leak drm/amdgpu/gfx10: add support for wks firmware loading drm/amdgpu/display: include slab.h in dcn21_resource.c drm/amdgpu/display: fix 64 bit divide drm/panfrost: Prevent race when handling page fault drm/panfrost: Remove NULL checks for regulator drm/panfrost: Fix regulator_get_optional() misuse drm: Measure Self Refresh Entry/Exit times to avoid thrashing drm: Fix kerneldoc and remove unused struct member in self_refresh helper drm/atomic: Rename crtc_state->pageflip_flags to async_flip drm/atomic: Reject FLIP_ASYNC unconditionally drm/atomic: Take the atomic toys away from X drm/amdgpu: flag navi12 and 14 as experimental for 5.4 drm/kms: Duct-tape for mode object lifetime checks drm/amdgpu: add navi12 pci id drm/amdgpu: add navi14 PCI ID for work station SKU drm/amdkfd: Swap trap temporary registers in gfx10 trap handler drm/amd/powerplay: implement sysfs for getting dpm clock drm/amd/display: Restore backlight brightness after system resume drm/amd/display: Implement voltage limitation for dali ...
2019-09-24Merge branch 'i2c/for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
2019-09-13Revert "drm/bridge: adv7511: Attach to DSI host at probe time"Rob Clark
This reverts commit 83f35bc3a852f1c3892c7474998c5cec707c7ba3. There are at least two DSI controller drivers which relies on the old behaviour of adv7511 driver. To avoid platform breakage this patch should be reverted. This is a temporary solution, as it blocks adv7511 usage with other platforms. Assumption that DSI device driver (bridge/panel) should first expose drm_bridge/drm_panel object, then look for DSI bus is just incorrect - it can work with devices controlled via i2c but it cannot work with devices controlled via DSI - they will not be able to probe. To solve the issue following steps should be performed: - rework reverted patch allowing co-operation with broken DSI controller drivers - with simple/ugly workaround, - fix controller drivers and then remove workaround. Signed-off-by: Rob Clark <robdclark@chromium.org> [a.hajda: changed commit message] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190829180836.14453-1-robdclark@gmail.com
2019-08-27Merge tag 'drm-misc-next-2019-08-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: Cross-subsystem Changes: Core Changes: - dma-buf: dma-fence selftests Driver Changes: - kirin: Various cleanups and reworks - komeda: Add support for DT memory-regions - meson: Rely on the compatible to detect vpu features - omap: Implement alpha and pixel blend mode properties - panfrost: Implement per-fd address spaces, various fixes - rockchip: DSI DT binding rework - fbdev: Various cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823083509.c7mduqdqjnxc7ubb@flea
2019-08-22Merge tag 'du-next-20190816' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
- R-Car DU fixes - Misc. DRM cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190816133500.GJ5020@pendragon.ideasonboard.com
2019-08-21Merge tag 'drm-misc-next-2019-08-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: Cross-subsystem Changes: Core Changes: - dma-buf: add reservation_object_fences helper, relax reservation_object_add_shared_fence, remove reservation_object seq number (and then restored) - dma-fence: Shrinkage of the dma_fence structure, Merge dma_fence_signal and dma_fence_signal_locked, Store the timestamp in struct dma_fence in a union with cb_list Driver Changes: - More dt-bindings YAML conversions - More removal of drmP.h includes - dw-hdmi: Support get_eld and various i2s improvements - gm12u320: Few fixes - meson: Global cleanup - panfrost: Few refactors, Support for GPU heap allocations - sun4i: Support for DDC enable GPIO - New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: fixup dma_resv rename fallout] From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
2019-08-20dw-hdmi-cec: use cec_notifier_cec_adap_(un)registerDariusz Marcinkiewicz
Use the new cec_notifier_cec_adap_(un)register() functions to (un)register the notifier for the CEC adapter. Also adds CEC_CAP_CONNECTOR_INFO capability to the adapter. Changes since v3: - add CEC_CAP_CONNECTOR_INFO to cec_allocate_adapter, - replace CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | CEC_CAP_RC | CEC_CAP_PASSTHROUGH with CEC_CAP_DEFAULTS. Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-4-darekm@google.com
2019-08-20drm: dw-hdmi: use cec_notifier_conn_(un)registerDariusz Marcinkiewicz
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector, and fill in the cec_connector_info. Changes since v6: - move cec_notifier_conn_unregister to a bridge detach function, - add a mutex protecting a CEC notifier. Changes since v4: - typo fix Changes since v2: - removed unnecessary NULL check before a call to cec_notifier_conn_unregister, - use cec_notifier_phys_addr_invalidate to invalidate physical address. Changes since v1: Add memory barrier to make sure that the notifier becomes visible to the irq thread once it is fully constructed. Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-9-darekm@google.com
2019-08-16drm: Don't include drm/drm_encoder_slave.h when not neededLaurent Pinchart
The dw-hdmi, kirin and imx drivers include the drm/drm_encoder_slave.h header but don't use the encoder slave API. Remove it or replace it with drm/drm_encoder.h as needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-08-14drm/bridge: dumb-vga-dac: Fix dereferencing -ENODEV DDC channelGeert Uytterhoeven
If the VGA connector has no DDC channel, an error pointer will be dereferenced, e.g. on Salvator-XS: Unable to handle kernel NULL pointer dereference at virtual address 000000000000017d ... Call trace: sysfs_do_create_link_sd.isra.0+0x40/0x108 sysfs_create_link+0x20/0x40 drm_sysfs_connector_add+0xa8/0xc8 drm_connector_register.part.3+0x54/0xb0 drm_connector_register_all+0xb0/0xd0 drm_modeset_register_all+0x54/0x88 drm_dev_register+0x18c/0x1d8 rcar_du_probe+0xe4/0x150 ... This happens because vga->ddc either contains a valid DDC channel pointer, or -ENODEV, and drm_connector_init_with_ddc() expects a valid DDC channel pointer, or NULL. Fix this by resetting vga->ddc to NULL in case of -ENODEV, and replacing the existing error checks by non-NULL checks. This is similar to what the HDMI connector driver does. Fixes: a4f9087e85de141e ("drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directory") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813093046.4976-1-geert+renesas@glider.be
2019-08-14drm/bridge: dw-hdmi-i2s: add .get_eld supportJerome Brunet
Provide the eld to the generic hdmi-codec driver. This will let the driver enforce the maximum channel number and set the channel allocation depending on the hdmi sink. Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812125016.20169-1-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: enable only the required i2s lanesJerome Brunet
Enable the i2s lanes depending on the number of channel in the stream Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-8-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: reset audio fifo before applying new paramsJerome Brunet
When changing the audio hw params, reset the audio fifo to make sure any old remaining data is flushed. The databook mentions that such reset should be followed by a reset of the i2s block to make sure the samples stay aligned Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-7-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: set the channel allocationJerome Brunet
setup the channel allocation provided by the generic hdmi-codec driver Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-6-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: enable lpcm multi channelsJerome Brunet
Properly setup the channel count and layout in dw-hdmi i2s driver so we are not limited to 2 channels. Also correct the maximum channel reported by the DAI from 6 to 8 ch Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-5-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi: set channel count in the infoframesJerome Brunet
Set the number of channel in the infoframes Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-4-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi: move audio channel setup out of ahbJerome Brunet
Part of the channel count setup done in dw-hdmi ahb should actually be done whatever the interface providing the data. Let's move it to dw-hdmi driver instead. Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-3-jbrunet@baylibre.com
2019-08-14drm/bridge: dw-hdmi-i2s: support more i2s formatJerome Brunet
The dw-hdmi-i2s supports more formats than just regular i2s. Add support for left justified, right justified and dsp modes A and B. Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-2-jbrunet@baylibre.com
2019-08-14i2c: replace i2c_new_secondary_device with an ERR_PTR variantWolfram Sang
In the general move to have i2c_new_*_device functions which return ERR_PTR instead of NULL, this patch converts i2c_new_secondary_device(). There are only few users, so this patch converts the I2C core and all users in one go. The function gets renamed to i2c_new_ancillary_device() so out-of-tree users will get a build failure to understand they need to adapt their error checking code. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> # adv748x Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # adv7511 + adv7604 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # adv7604 Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-10drm/panel: drop return code from drm_panel_detach()Sam Ravnborg
There are no errors that can be reported by this function, so drop the return code. Fix the only bridge driver that checked the return result. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-14-sam@ravnborg.org
2019-08-10drm/bridge: tc358767: fix opencoded use of drm_panel_*Sam Ravnborg
Replace open coded version with call to drm_panel_get_modes(). Include change to deal with the possible negative return values from drm_panel_get_modes() v2: - Added more info to changelog (Philipp) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-2-sam@ravnborg.org
2019-08-09Merge tag 'drm-misc-next-2019-08-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: - HDCP: Add a Content protection type property Cross-subsystem Changes: Core Changes: - Continue to rework the include dependencies - fb: Remove the unused drm_gem_fbdev_fb_create function - drm-dp-helper: Make the link rate calculation more tolerant to non-explicitly defined, yet supported, rates - fb-helper: Map DRM client buffer only when required, and instanciate a shadow buffer when the device has a dirty function or says so - connector: Add a helper to link the DDC adapter used by that connector to the userspace - vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout - dma-buf: Fix a stack corruption - ttm: Embed a drm_gem_object struct to make ttm_buffer_object a superclass of GEM, and convert drivers to use it. - hdcp: Improvements to report the content protection type to the userspace Driver Changes: - Remove drm_gem_prime_import/export from being defined in the drivers - Drop DRM_AUTH usage from drivers - Continue to drop drmP.h - Convert drivers to the connector ddc helper - ingenic: Add support for more panel-related cases - komeda: Support for dual-link - lima: Reduce logging - mpag200: Fix the cursor support - panfrost: Export GPU features register to userspace through an ioctl - pl111: Remove the CLD pads wiring support from the DT - rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET macro - sun4i: Improve support for color encoding and range - tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny - vkms: Rework of the CRC tracking - bridges: - sii902x: Add support for audio graph card - tc358767: Rework AUX data handling code - ti-sn65dsi86: Add Debugfs and proper DSI mode flags support - panels - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - Conversion of the device tree bindings to the YAML description - jh057n00900: Rework the enable / disable path - fbdev: - ssd1307fb: Support more devices based on that controller Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
2019-08-05drm/bridge/parade: Drop legacy GPIO headerLinus Walleij
This driver uses the new GPIO API from <linux/gpio/consumer.h> so drop the inclusion of the legacy header. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190708113154.12985-1-linus.walleij@linaro.org
2019-08-05drm/bridge/nxp-ptn3460: Drop legacy GPIO headersLinus Walleij
This driver uses exclusively the new GPIO API from <linux/gpio/consumer.h> so just drop the old API headers. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708113009.12723-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05drm/bridge/megachips: Drop GPIO headerLinus Walleij
This file isn't using any interfaces from <linux/gpio.h> so just drop the include. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190708112803.12432-1-linus.walleij@linaro.org
2019-07-31drm/bridge: ti-tfp410: Provide ddc symlink in connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b61da77a6456805db0deffe6d1a2343dd784730.1564161140.git.andrzej.p@collabora.com
2019-07-31drm/bridge: dw-hdmi: Provide ddc symlink in connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/4bcf0f154c683c9787fa34f911ebc52de6b4a7a1.1564161140.git.andrzej.p@collabora.com
2019-07-31drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/ebb75e71b8b7c8d65d54a947a03fd21b8969fb3a.1564161140.git.andrzej.p@collabora.com
2019-07-30drm/rockchip: Make analogix_dp_atomic_check staticYueHaibing
Fix sparse warning: drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1151:5: warning: symbol 'analogix_dp_atomic_check' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190730150057.57388-1-yuehaibing@huawei.com
2019-07-30drm/bridge: tc358764: Fix build errorYueHaibing
If CONFIG_DRM_TOSHIBA_TC358764=y but CONFIG_DRM_KMS_HELPER=m, building fails: drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x228): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x240): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x268): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x270): undefined reference to `drm_atomic_helper_connector_destroy_state' Like TC358767, select DRM_KMS_HELPER to fix this, and change to select DRM_PANEL to avoid recursive dependency. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729090520.25968-1-yuehaibing@huawei.com
2019-07-30drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=mYueHaibing
If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com
2019-07-26drm/rockchip: Use the helpers for PSRSean Paul
Instead of rolling our own implementation for tracking when PSR should be [in]active, use the new self refresh helpers to do the heavy lifting. Changes in v2: - updated to reflect changes made in the helpers Changes in v3: - use the new atomic hooks to inspect crtc state instead of needing conn state (Daniel) Changes in v4: - Use Laurent's get_new_connector_for_encoder helper (Daniel) - Exit vop disable early if it's already off Changes in v5: - Rebase on latest drm-misc-next - Resolve conflict with s/edp_vsc_psr/dp_sdp/ rename - Resolve conflict with drm_atomic.h header inclusion Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-4-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-3-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-9-sean@poorly.run Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> [seanpaul resolved some conflicts with drmP.h work and Helen's async fixes] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-9-sean@poorly.run
2019-07-26drm/rockchip: Check for fast link training before enabling psrSean Paul
Once we start shutting off the link during PSR, we're going to want fast training to work. If the display doesn't support fast training, don't enable psr. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - None Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run
2019-07-25drm/bridge: sii902x: add audio graph card supportOlivier Moysan
Implement get_dai_id callback of audio HDMI codec to support ASoC audio graph card. HDMI audio output has to be connected to sii902x port 3. get_dai_id callback maps this port to ASoC DAI index 0. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1562141052-26221-1-git-send-email-olivier.moysan@st.com
2019-07-25drm/bridge: sii902x: make audio mclk optionalOlivier Moysan
The master clock on i2s bus is not mandatory, as sii902X internal PLL can be used instead. Make use of mclk optional. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-4-git-send-email-olivier.moysan@st.com
2019-07-25drm/bridge: sii902x: fix missing reference to mclk clockOlivier Moysan
Add devm_clk_get call to retrieve reference to master clock. Fixes: ff5781634c41 ("drm/bridge: sii902x: Implement HDMI audio support") Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-2-git-send-email-olivier.moysan@st.com
2019-07-22drm/bridge: Improve the help text for DRM_ANALOGIX_ANX78XXFabio Estevam
Improve the help text for DRM_ANALOGIX_ANX78XX by adding the missing "power" word. After this change the help text matches with the ANX7814 product description from the Analogix website: https://www.analogix.com/en/products/convertersbridges/anx7814 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190722194049.20761-1-festevam@gmail.com
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-16drm/bridge: ti-sn65dsi86: use dev name for debugfsRob Clark
This should be more future-proof if we ever encounter a device with two of these bridges. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190706203105.7810-1-robdclark@gmail.com
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-07-04drm/bridge: ti-sn65dsi86: correct dsi mode_flagsRob Clark
Noticed while comparing register dump of how bootloader configures DSI vs how kernel configures. It seems the bridge still works either way, but fixing this clears the 'CHA_DATATYPE_ERR' error status bit. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-4-robdclark@gmail.com
2019-07-04drm/bridge: ti-sn65dsi86: add debugfsRob Clark
Add a debugfs file to show status registers. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-3-robdclark@gmail.com
2019-07-04drm/bridge: ti-sn65dsi86: add link to datasheetRob Clark
The bridge has pretty good docs, lets add a link to make them easier to find. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190702154419.20812-2-robdclark@gmail.com
2019-07-04drm/bridge: sii902x: Make sii902x_audio_digital_mute staticYueHaibing
Fix sparse warning: drivers/gpu/drm/bridge/sii902x.c:665:5: warning: symbol 'sii902x_audio_digital_mute' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614153623.28708-1-yuehaibing@huawei.com
2019-07-01drm/bridge: dw-hdmi: Use automatic CTS generation mode when using non-AHB audioNeil Armstrong
When using an I2S source using a different clock source (usually the I2S audio HW uses dedicated PLLs, different from the HDMI PHY PLL), fixed CTS values will cause some frequent audio drop-out and glitches as reported on Amlogic, Allwinner and Rockchip SoCs setups. Setting the CTS in automatic mode will let the HDMI controller generate automatically the CTS value to match the input audio clock. The DesignWare DW-HDMI User Guide explains: For Automatic CTS generation Write "0" on the bit field "CTS_manual", Register 0x3205: AUD_CTS3 The DesignWare DW-HDMI Databook explains : If "CTS_manual" bit equals 0b this registers contains "audCTS[19:0]" generated by the Cycle time counter according to specified timing. Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190612085147.26971-1-narmstrong@baylibre.com
2019-07-01drm/bridge: tc358767: do a software reset if reset pin isn't connectedLucas Stach
To get the chip into the expected state, even when the hardware reset pin isn't connected, do a software reset in this case. It isn't as thorough as the hardware reset, as the I2C communication block can not be reset for obvious reasons, but it's getting the chip into a defined state. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190627085958.28331-1-l.stach@pengutronix.de
2019-07-01drm/bridge: adv7511: Attach to DSI host at probe timeMatt Redfearn
In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel which attach to the DSI host via mipi_dsi_attach() at probe time, the ADV7533 bridge device does not. Instead it defers this to the point that the upstream device connects to its bridge via drm_bridge_attach(). The generic Synopsys MIPI DSI host driver does not register it's own drm_bridge until the MIPI DSI has attached. But it does not call drm_bridge_attach() on the downstream device until the upstream device has attached. This leads to a chicken and the egg failure and the DRM pipeline does not complete. Since all other mipi_dsi_device drivers call mipi_dsi_attach() in probe(), make the adv7533 mipi_dsi_device do the same. This ensures that the Synopsys MIPI DSI host registers it's bridge such that it is available for the upstream device to connect to. Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190627151740.2277-1-matt.redfearn@thinci.com
2019-06-27drm/bridge: tc358767: Add support for address-only I2C transfersAndrey Smirnov
Transfer size of zero means a request to do an address-only transfer. Since the HW support this, we probably shouldn't be just ignoring such requests. While at it allow DP_AUX_I2C_MOT flag to pass through, since it is supported by the HW as well. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-16-andrew.smirnov@gmail.com
2019-06-27drm/bridge: tc358767: Replace magic number in tc_main_link_enable()Andrey Smirnov
We don't need 8 byte array, DP_LINK_STATUS_SIZE (6) should be enough. This also gets rid of a magic number as a bonus. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-15-andrew.smirnov@gmail.com
generated by cgit (git 2.34.1) at 2024-05-28 05:45:46 +0000