Age | Commit message (Collapse) | Author |
|
Tiled displays have a different x/y offset to begin with. Instead of
attempting to remember this, just apply a delta instead.
This fixes the first tile being duplicated on other tiles when vt
switching.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
|
|
The drm_fb_helper_deferred_io() uses struct fb_deferred_io_pageref,
which isn't available without CONFIG_FB_DEFERRED_IO. Put the function
under corresponding #ifdef to fix build failure if deferred I/O isn't
enabled.
Fixes: 8058944f5226 ("drm/fbdev: Select fbdev I/O helpers from modules that require them")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-fix-drm-deferred-v2-1-db1de4c6b042@linaro.org
|
|
Add an fbdev client that can work with any memory manager. The
client implementation is the same as existing code in fbdev-dma or
fbdev-shmem.
Provide struct drm_driver.fbdev_probe for the new client to allocate
the surface GEM buffer. The new callback replaces fb_probe of struct
drm_fb_helper_funcs, which does the same.
To use the new client, DRM drivers set fbdev_probe in their struct
drm_driver instance and call drm_fbdev_client_setup(). Probing and
creating the fbdev surface buffer is now independent from the other
operations in struct drm_fb_helper. For the pixel format, the fbdev
client either uses a specified format, the value in preferred_depth
or 32-bit RGB.
v2:
- test for struct drm_fb_helper.funcs for NULL (Sui)
- respect struct drm_mode_config.preferred_depth for default format
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-4-tzimmermann@suse.de
|
|
Call vga_switcheroo_client_fb_set() with the PCI device from the
instance of struct fb_info. All fbdev clients now run these calls.
For non-PCI devices or drivers without vga-switcheroo, this does
nothing. For i915 and radeon, it allows these drivers to use a
common fbdev client.
The device is the same as the one stored in struct drm_client and
struct drm_fb_helper, so there is no difference in behavior. Some
NULL-pointer checks are being removed, where those pointers cannot
be NULL.
v4:
- clarify call semantics for drm_fb_helper_unregister_info() (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-3-tzimmermann@suse.de
|
|
The color mode as specified on the kernel command line gives the user's
preferred color depth and number of bits per pixel. Move the
color-mode-to-format conversion from fbdev helpers into a 4CC helper,
so that it can be shared among DRM clients.
v2:
- fix grammar in commit message (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-2-tzimmermann@suse.de
|
|
The function is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-8-tzimmermann@suse.de
|
|
The old callbacks lastclose and output_poll_changed are deprecated and
unused. Remove them from the documentation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-7-tzimmermann@suse.de
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
virtio:
- Define DRM capset
Cross-subsystem Changes:
dma-buf:
- heaps: Clean up documentation
printk:
- Pass description to kmsg_dump()
Core Changes:
CI:
- Update IGT tests
- Point upstream repo to GitLab instance
modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
panic:
- Avoid build-time interference with framebuffer console
docs:
- Document Colorspace property
scheduler:
- Remove full_recover from drm_sched_start
TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
Driver Changes:
amdgpu:
- Support Power Saving Policy connector property
ast:
- astdp: Support AST2600 with VGA; Clean up HPD
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
gma500:
- Update i2c terminology
ivpu:
- Add MODULE_FIRMWARE()
lcdif:
- Fix pixel clock
loongson:
- Use GEM refcount over TTM's
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
sti:
- Fix module owner
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- Call drm_atomic_helper_shutdown()
v3d:
- Clean up perfmon
vkms:
- Clean up
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box
|
|
Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Backmerging to get a late RC of v6.10 before moving into v6.11.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
fb_info->skip_panic flag prevents fbcon from writing to the
framebuffer during a kernel panic. So set it when the drm driver
implements drm panic, to avoid overwriting the panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-3-jfalempe@redhat.com
|
|
Sometimes the system [1] hangs on x86 I/O machine checks. However, the
expected behavior is to reboot the system, as the machine check handler
ultimately triggers a panic(), initiating a reboot in the last step.
The root cause is that sometimes the panic() is blocked when
drm_fb_helper_damage() invoking schedule_work() to flush the frame buffer.
This occurs during the process of flushing all messages to the frame
buffer driver as shown in the following call trace:
Machine check occurs [2]:
panic()
console_flush_on_panic()
console_flush_all()
console_emit_next_record()
con->write()
vt_console_print()
hide_cursor()
vc->vc_sw->con_cursor()
fbcon_cursor()
ops->cursor()
bit_cursor()
soft_cursor()
info->fbops->fb_imageblit()
drm_fbdev_generic_defio_imageblit()
drm_fb_helper_damage_area()
drm_fb_helper_damage()
schedule_work() // <--- blocked here
...
emergency_restart() // wasn't invoked, so no reboot.
During panic(), except the panic CPU, all the other CPUs are stopped.
In schedule_work(), the panic CPU requires the lock of worker_pool to
queue the work on that pool, while the lock may have been token by some
other stopped CPU. So schedule_work() is blocked.
Additionally, during a panic(), since there is no opportunity to execute
any scheduled work, it's safe to fix this issue by skipping schedule_work()
on 'oops_in_progress' in drm_fb_helper_damage().
[1] Enable the kernel option CONFIG_FRAMEBUFFER_CONSOLE,
CONFIG_DRM_FBDEV_EMULATION, and boot with the 'console=tty0'
kernel command line parameter.
[2] Set 'panic_timeout' to a non-zero value before calling panic().
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Yudong Wang <yudong.wang@intel.com>
Tested-by: Yudong Wang <yudong.wang@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703141737.75378-1-qiuxu.zhuo@intel.com
Signed-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
|
|
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().
Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.
[ 3.536043] ------------[ cut here ]------------
[ 3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[ 3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[ 3.565455] Modules linked in:
[ 3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[ 3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[ 3.582452] Workqueue: events_unbound deferred_probe_work_func
[ 3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.595233] pc : __virt_to_phys+0x68/0x98
[ 3.599246] lr : __virt_to_phys+0x68/0x98
[ 3.603276] sp : ffff800083603990
[ 3.677939] Call trace:
[ 3.680393] __virt_to_phys+0x68/0x98
[ 3.684067] drm_fbdev_dma_helper_fb_probe+0x138/0x238
[ 3.689214] __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[ 3.695385] drm_fb_helper_initial_config+0x4c/0x68
[ 3.700264] drm_fbdev_dma_client_hotplug+0x8c/0xe0
[ 3.705161] drm_client_register+0x60/0xb0
[ 3.709269] drm_fbdev_dma_setup+0x94/0x148
Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().
Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Peng Fan (OSS) <peng.fan@oss.nxp.com>
Closes: https://lore.kernel.org/dri-devel/20240604080328.4024838-1-peng.fan@oss.nxp.com/
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdX3N0szUvt1VTbroa2zrT1Nye_VzPb5qqCZ7z5gSm7HGw@mail.gmail.com/
Fixes: a51c7663f144 ("drm/fb-helper: Consolidate CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20240617152843.11886-1-tzimmermann@suse.de
|
|
Rewrite some docs that are not up-to-date any longer. Remove the TODO
item for fbdev-generic conversion, as the helper has been replaced. Make
documentation for DMA, SHMEM and TTM emulation available.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-44-tzimmermann@suse.de
|
|
The passed parameter to sysrq handlers is a key (a character). So change
the type from 'int' to 'u8'. Let it specifically be 'u8' for two
reasons:
* unsigned: unsigned values come from the upper layers (devices) and the
tty layer assumes unsigned on most places, and
* 8-bit: as that what's supposed to be one day in all the layers built
on the top of tty. (Currently, we use mostly 'unsigned char' and
somewhere still only 'char'. (But that also translates to the former
thanks to -funsigned-char.))
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> # DRM
Acked-by: WANG Xuerui <git@xen0n.name> # loongarch
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230712081811.29004-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the fbdev callbacks. i915 was the only
caller of the DRM helpers, so remove them from the helper module.
i915's fbdev emulation is still incomplete as it doesn't implement
deferred I/O and damage handling for mmaped pages.
v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_IO_HELPERS options
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-14-tzimmermann@suse.de
|
|
Implement dedicated fbdev helpers for framebuffer I/O instead
of using DRM's helpers. Use an fbdev generator macro for
deferred I/O to create the callbacks. Fbdev-generic was the
only caller of the DRM helpers, so remove them from the helper
module.
v4:
* generate deferred-I/O helpers
* use initializer macros for fb_ops
v2:
* use FB_SYS_HELPERS_DEFERRED option
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-13-tzimmermann@suse.de
|
|
Export drm_fb_helper_damage() and drm_fb_helper_damage_range(), which
handle damage areas for fbdev emulation. This is a temporary export
that allows to move the DRM I/O helpers for fbdev into drivers. Only
fbdev-generic and i915 need them. Both will be updated to implement
damage handling by themselves and the exported functions will be removed.
v4:
* update interfaces
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-11-tzimmermann@suse.de
|
|
Fbtest contains some very simple validation of the fbdev userspace API
contract. When used with shmob-drm, it reports the following warnings
and errors:
height changed from 68 to 0
height was rounded down
width changed from 111 to 0
width was rounded down
accel_flags changed from 0 to 1
The first part happens because __fill_var() resets the physical
dimensions of the first connector, as filled in by drm_setup_crtcs_fb().
Fix this by retaining the original values.
The last part happens because __fill_var() forces the FB_ACCELF_TEXT
flag on, while fbtest disables all acceleration on purpose, so it can
draw safely to the frame buffer. Fix this by setting accel_flags to
zero, as DRM does not implement any text console acceleration.
Note that this issue can also be seen in the output of fbset, which
reports "accel true".
Fixes: ee4cce0a8f03a333 ("drm/fb-helper: fix input validation gaps in check_var")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/57e6b334dae8148b1b8ae6ef308ce9a83810a850.1684854344.git.geert+renesas@glider.be
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.5:
UAPI Changes:
Cross-subsystem Changes:
- arch: Consolidate <asm/fb.h>
Core Changes:
- aperture: Ignore firmware framebuffers with non-primary devices
- fbdev: Use fbdev's I/O helpers
- sysfs: Expose DRM connector ID
- tests: More tests for drm_rect
Driver Changes:
- armada: Implement fbdev emulation as a client
- bridge:
- fsl-ldb: Support i.MX6SX
- lt9211: Remove blanking packets
- lt9611: Remove blanking packets
- tc358768: Implement input bus formats reporting, fix various
timings and clocks settings
- ti-sn65dsi86: Implement wait_hpd_asserted
- nouveau: Improve NULL pointer checks before dereference
- panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- new panels: InnoLux G070ACE-L01
- sun4i: Fix MIPI-DSI dotclock
- vc4: RGB Range toggle property, BT601 and BT2020 support for HDMI
- vkms: Convert to drmm helpers, Add reflection and rotation support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/2pxmxdzsk2ekjy6xvbpj67zrhtwvkkhfspuvdm5pfm5i54hed6@sooct7yq6z4w
|
|
Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc2:
- More DSC macro fixes.
- Small mipi-dsi fix.
- Scheduler timeout handling fix.
---
drm-misc-fixes for v6.4-rc1:
- Fix DSC macros.
- Fix VESA format for simplefb.
- Prohibit potential out-of-bounds access in generic fbdev emulation.
- Improve AST2500+ compat on ARM.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b34135e3-2651-4e0a-a776-9b047882b1b2@linux.intel.com
|
|
Implement DRM fbdev helpers for reading and writing framebuffer
memory with the respective fbdev functions. Removes duplicate
code.
v2:
* rename fb_cfb_() to fb_io_() (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-20-tzimmermann@suse.de
|
|
The fbdev test of IGT may write after EOF, which lead to out-of-bound
access for drm drivers with fbdev-generic. For example, run fbdev test
on a x86+ast2400 platform, with 1680x1050 resolution, will cause the
linux kernel hang with the following call trace:
Oops: 0000 [#1] PREEMPT SMP PTI
[IGT] fbdev: starting subtest eof
Workqueue: events drm_fb_helper_damage_work [drm_kms_helper]
[IGT] fbdev: starting subtest nullptr
RIP: 0010:memcpy_erms+0xa/0x20
RSP: 0018:ffffa17d40167d98 EFLAGS: 00010246
RAX: ffffa17d4eb7fa80 RBX: ffffa17d40e0aa80 RCX: 00000000000014c0
RDX: 0000000000001a40 RSI: ffffa17d40e0b000 RDI: ffffa17d4eb80000
RBP: ffffa17d40167e20 R08: 0000000000000000 R09: ffff89522ecff8c0
R10: ffffa17d4e4c5000 R11: 0000000000000000 R12: ffffa17d4eb7fa80
R13: 0000000000001a40 R14: 000000000000041a R15: ffffa17d40167e30
FS: 0000000000000000(0000) GS:ffff895257380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa17d40e0b000 CR3: 00000001eaeca006 CR4: 00000000001706e0
Call Trace:
<TASK>
? drm_fbdev_generic_helper_fb_dirty+0x207/0x330 [drm_kms_helper]
drm_fb_helper_damage_work+0x8f/0x170 [drm_kms_helper]
process_one_work+0x21f/0x430
worker_thread+0x4e/0x3c0
? __pfx_worker_thread+0x10/0x10
kthread+0xf4/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
CR2: ffffa17d40e0b000
---[ end trace 0000000000000000 ]---
The is because damage rectangles computed by
drm_fb_helper_memory_range_to_clip() function is not guaranteed to be
bound in the screen's active display area. Possible reasons are:
1) Buffers are allocated in the granularity of page size, for mmap system
call support. The shadow screen buffer consumed by fbdev emulation may
also choosed be page size aligned.
2) The DIV_ROUND_UP() used in drm_fb_helper_memory_range_to_clip()
will introduce off-by-one error.
For example, on a 16KB page size system, in order to store a 1920x1080
XRGB framebuffer, we need allocate 507 pages. Unfortunately, the size
1920*1080*4 can not be divided exactly by 16KB.
1920 * 1080 * 4 = 8294400 bytes
506 * 16 * 1024 = 8290304 bytes
507 * 16 * 1024 = 8306688 bytes
line_length = 1920*4 = 7680 bytes
507 * 16 * 1024 / 7680 = 1081.6
off / line_length = 507 * 16 * 1024 / 7680 = 1081
DIV_ROUND_UP(507 * 16 * 1024, 7680) will yeild 1082
memcpy_toio() typically issue the copy line by line, when copy the last
line, out-of-bound access will be happen. Because:
1082 * line_length = 1082 * 7680 = 8309760, and 8309760 > 8306688
Note that userspace may still write to the invisiable area if a larger
buffer than width x stride is exposed. But it is not a big issue as
long as there still have memory resolve the access if not drafting so
far.
- Also limit the y1 (Daniel)
- keep fix patch it to minimal (Daniel)
- screen_size is page size aligned because of it need mmap (Thomas)
- Adding fixes tag (Thomas)
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Fixes: aa15c677cc34 ("drm/fb-helper: Fix vertical damage clipping")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/dri-devel/ad44df29-3241-0d9e-e708-b0338bf3c623@189.cn/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420030500.1578756-1-suijingfeng@loongson.cn
|
|
Apparently drivers need to check all this stuff themselves, which for
most things makes sense I guess. And for everything else we luck out,
because modern distros stopped supporting any other fbdev drivers than
drm ones and I really don't want to argue anymore about who needs to
check stuff. Therefore fixing all this just for drm fbdev emulation is
good enough.
Note that var->active is not set or validated. This is just control
flow for fbmem.c and needs to be validated in there as needed.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-3-daniel.vetter@ffwll.ch
|
|
The fb_check_var hook is supposed to validate all this stuff. Any
errors from fb_set_par are considered driver/hw issues and resulting
in dmesg warnings.
Luckily we do fix up the pixclock already, so this is all fine.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-2-daniel.vetter@ffwll.ch
|
|
Drivers are supposed to fix this up if needed if they don't outright
reject it. Uncovered by 6c11df58fd1a ("fbmem: Check virtual screen
sizes in fb_set_var()").
Reported-by: syzbot+20dcf81733d43ddff661@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c5faf983bfa4a607de530cd3bb008888bf06cefc
Cc: stable@vger.kernel.org # v5.4+
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-1-daniel.vetter@ffwll.ch
|
|
Consolidate all handling of CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM by
making the module parameter optional in drm_fb_helper.c.
Without the config option, modules can set smem_start in struct
fb_info for internal usage, but not export if to userspace. The
address can only be exported by enabling the option and setting
the module parameter. Also update the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Zack Rusin <zackr@vmware.com>
Tested-by: Sui Jingfeng<suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320150751.20399-8-tzimmermann@suse.de
|
|
The size of the framebuffer can either be stored in screen_info or
smem_len. Take both into account in the deferred I/O code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320150751.20399-5-tzimmermann@suse.de
|
|
Export the fb_info release code as drm_fb_helper_release_info(). Will
help with cleaning up failed fbdev probing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Zack Rusin <zackr@vmware.com>
Tested-by: Sui Jingfeng<suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320150751.20399-4-tzimmermann@suse.de
|
|
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the
calling fbdev implementation. Avoids a possible stale mutex with
generic fbdev code.
As indicated by its name, drm_fb_helper_prepare() prepares struct
drm_fb_helper before setting up the fbdev support with a call to
drm_fb_helper_init(). In legacy fbdev emulation, this happens next
to each other. If successful, drm_fb_helper_fini() later tear down
the fbdev device and also unprepare via drm_fb_helper_unprepare().
Generic fbdev emulation prepares struct drm_fb_helper immediately
after allocating the instance. It only calls drm_fb_helper_init()
as part of processing a hotplug event. If the hotplug-handling fails,
it runs drm_fb_helper_fini(). This unprepares the fb-helper instance
and the next hotplug event runs on stale data.
Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini()
into the fbdev implementations. Call it right before freeing the
fb-helper instance.
Fixes: 643231b28380 ("drm/fbdev-generic: Minimize hotplug error handling")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
|
|
Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.
Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
in drm_fb_helper_single_fb_probe and a refactor patch that extracted
lots of helpers and incidentally removed the dev local variable.
Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Initialize the fb-helper's preferred_bpp field early from within
drm_fb_helper_prepare(); instead of the later client hot-plugging
callback. This simplifies the generic fbdev setup function.
No real changes, but all drivers' fbdev code has to be adapted.
v3:
* build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
|
|
Store the console's preferred BPP value in struct drm_fb_helper
and remove the respective function parameters from the internal
fbdev code.
The BPP value is only required as a fallback and will now always
be available in the fb-helper instance.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-6-tzimmermann@suse.de
|
|
Move the fb-helper clean-up code into drm_fb_helper_unprepare(). No
functional changes.
v2:
* declare as static inline (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-4-tzimmermann@suse.de
|
|
Set the framebuffer info for drivers that support VGA switcheroo. Only
affects the amdgpu and nouveau drivers, which use VGA switcheroo and
generic fbdev emulation. For other drivers, this does nothing.
This fixes a potential regression in the console code. Both, amdgpu and
nouveau, invoked vga_switcheroo_client_fb_set() from their internal fbdev
code. But the call got lost when the drivers switched to the generic
emulation.
Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: "Tianci.Yin" <tianci.yin@amd.com>
Cc: Xiaojian Du <Xiaojian.Du@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Bokun Zhang <Bokun.Zhang@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Solomon Chiu <solomon.chiu@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.17+
Link: https://patchwork.freedesktop.org/patch/msgid/20230116115425.13484-3-tzimmermann@suse.de
|
|
The apertures field in struct fb_info is not used by DRM drivers. Do
not allocate it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219160516.23436-7-tzimmermann@suse.de
|
|
Replace the combination of bpp and depth with a single color-mode
argument. Handle special cases in simpledrm and ofdrm. Hard-code
XRGB8888 as fallback format for cases where no given format works.
The color-mode argument accepts the same values as the kernel's video
parameter. These are mostly bpp values between 1 and 32. The exceptions
are 15, which has a color depth of 15 and a bpp value of 16; and 32,
which has a color depth of 24 and a bpp value of 32.
v4:
* add back lost test for bpp_specified (Maira)
* add Fixes tag (Daniel)
v3:
* fix ofdrm build (Maxime)
v2:
* minimize changes (Daniel)
* use drm_driver_legacy_fb_format() (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Maíra Canal <mcanal@igalia.com> # vc4 and vkms
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 37c90d589dc0 ("drm/fb-helper: Fix single-probe color-format selection")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106112324.22055-1-tzimmermann@suse.de
|
|
Fix the color-format selection of the single-probe helper. Go
through all user-specified values and test each for compatibility
with the driver. If none is supported, use the driver-provided
default. This guarantees that the console is always available in
any color format at least.
Until now, the format selection of the single-probe helper tried
to either use a user-specified format or a 32-bit default format.
If the user-specified format was not supported by the driver, the
selection failed and the display remained blank.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-12-tzimmermann@suse.de
|
|
Split the single-probe helper's implementation into multiple
functions and get locking and overallocation out of the way of
the surface setup. Simplifies later changes to the setup code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-11-tzimmermann@suse.de
|
|
This reverts commit 5fc586a058babc71c82a038477581b7bfe1c6e2a.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-4-tzimmermann@suse.de
(cherry picked from commit e3ddd2d25533d1cc6f9fea421e4a5f16b60b3434)
|
|
framebuffer"
This reverts commit 7f5cc4a3e5e4c5a38e5748defc952e45278f7a70.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-3-tzimmermann@suse.de
(cherry picked from commit 8b83e1a455382dc667898a525a93f4eb6716cc41)
|
|
This reverts commit 27c3e9452d552ea86369a94f23287a9675f2d7a1.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-2-tzimmermann@suse.de
(cherry picked from commit 7aa3d63e1ad56c174536a5aba76d8a54c4c5acb4)
|
|
This reverts commit 5fc586a058babc71c82a038477581b7bfe1c6e2a.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-4-tzimmermann@suse.de
|
|
framebuffer"
This reverts commit 7f5cc4a3e5e4c5a38e5748defc952e45278f7a70.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-3-tzimmermann@suse.de
|
|
This reverts commit 27c3e9452d552ea86369a94f23287a9675f2d7a1.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-2-tzimmermann@suse.de
|
|
The fbdev damage worker is unused, so remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-7-tzimmermann@suse.de
|
|
Schedule the deferred-I/O worker instead of the damage worker after
writing to the fbdev framebuffer. The deferred-I/O worker then performs
the dirty-fb update. The fbdev emulation will initialize deferred I/O
for all drivers that require damage updates. It is therefore a valid
assumption that the deferred-I/O worker is present.
It would be possible to perform the damage handling directly from within
the write operation. But doing this could increase the overhead of the
write or interfere with a concurrently scheduled deferred-I/O worker.
Instead, scheduling the deferred-I/O worker with its regular delay of
50 ms removes load off the write operation and allows the deferred-I/O
worker to handle multiple write operations that arrived during the delay
time window.
v3:
* remove unused variable (lkp)
v2:
* keep drm_fb_helper_damage() (Daniel)
* use fb_deferred_io_schedule_flush() (Daniel)
* clarify comments (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-6-tzimmermann@suse.de
|