summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_ioctl.c
AgeCommit message (Collapse)Author
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-04-20docs: fix broken references to text filesMauro Carvalho Chehab
Several references got broken due to txt to ReST conversion. Several of them can be automatically fixed with: scripts/documentation-file-ref-check --fix Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-30drm: rework SET_MASTER and DROP_MASTER perm handlingEmil Velikov
This commit reworks the permission handling of the two ioctls. In particular it enforced the CAP_SYS_ADMIN check only, if: - we're issuing the ioctl from process other than the one which opened the node, and - we are, or were master in the past This ensures that we: - do not regress the systemd-logind style of DRM_MASTER arbitrator - allow applications which do not use systemd-logind to drop their master capabilities (and regain them at later point) ... w/o running as root. See the comment above drm_master_check_perm() for more details. v1: - Tweak wording, fixup all checks, add igt test v2: - Add a few more comments, grammar nitpicks. Cc: Adam Jackson <ajax@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Testcase: igt/core_setmaster/master-drop-set-user Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319172930.230583-1-emil.l.velikov@gmail.com
2020-01-14drm: Add getfb2 ioctlDaniel Stone
getfb2 allows us to pass multiple planes and modifiers, just like addfb2 over addfb. Changes since v2: - add privilege checks from getfb1 since handles should only be returned to master/root Changes since v1: - unused modifiers set to 0 instead of DRM_FORMAT_MOD_INVALID - update ioctl number Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Juston Li <juston.li@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191217034642.3814-1-juston.li@intel.com
2019-12-02drm: drop DRM_AUTH from PRIME_TO/FROM_HANDLE ioctlsEmil Velikov
As mentioned by Christian, for drivers which support only primary nodes this changes the returned error from -EACCES into -EOPNOTSUPP/-ENOSYS. For others, this check in particular will be a noop. So let's remove it as suggested by Christian. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191101130313.8862-5-emil.l.velikov@gmail.com
2019-09-18drm/atomic: Take the atomic toys away from XDaniel Vetter
The -modesetting ddx has a totally broken idea of how atomic works: - doesn't disable old connectors, assuming they get auto-disable like with the legacy setcrtc - assumes ASYNC_FLIP is wired through for the atomic ioctl - not a single call to TEST_ONLY Iow the implementation is a 1:1 translation of legacy ioctls to atomic, which is a) broken b) pointless. We already have bugs in both i915 and amdgpu-DC where this prevents us from enabling neat features. If anyone ever cares about atomic in X we can easily add a new atomic level (req->value == 2) for X to get back the shiny toys. Since these broken versions of -modesetting have been shipping, there's really no other way to get out of this bind. v2: - add an informational dmesg output (Rob, Ajax) - reorder after the DRIVER_ATOMIC check to avoid useless noise (Ilia) - allow req->value > 2 so that X can do another attempt at atomic in the future v3: Go with paranoid, insist that the X should be first (suggested by Rob) Cc: Ilia Mirkin <imirkin@alum.mit.edu> References: https://gitlab.freedesktop.org/xorg/xserver/issues/629 References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/180 References: abbc0697d5fb ("drm/fb: revert the i915 Actually configure untiled displays from master") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1) Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1) Cc: Michel Dänzer <michel@daenzer.net> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Adam Jackson <ajax@redhat.com> Acked-by: Adam Jackson <ajax@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190905185318.31363-1-daniel.vetter@ffwll.ch
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-16Merge tag 'docs/v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...
2019-07-15docs: ioctl: convert to ReSTMauro Carvalho Chehab
Rename the iio documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. The cdrom.txt and hdio.txt have their own particular syntax. In order to speedup the conversion, I used a small ancillary perl script: my $d; $d .= $_ while(<>); $d =~ s/(\nCDROM\S+)\s+(\w[^\n]*)/$1\n\t$2\n/g; $d =~ s/(\nHDIO\S+)\s+(\w[^\n]*)/$1\n\t$2\n/g; $d =~ s/(\n\s*usage:)[\s\n]*(\w[^\n]*)/$1:\n\n\t $2\n/g; $d =~ s/(\n\s*)(E\w+[\s\n]*\w[^\n]*)/$1- $2/g; $d =~ s/(\n\s*)(inputs|outputs|notes):\s*(\w[^\n]*)/$1$2:\n\t\t$3\n/g; print $d; It basically add blank lines on a few interesting places. The script is not perfect: still several things require manual work, but it saved quite some time doing some obvious stuff. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21drm/ioctl: Ditch DRM_UNLOCKED except for the legacy vblank ioctlDaniel Vetter
This completes Emil's series of removing DRM_UNLOCKED from modern drivers. It's entirely cargo-culted since we ignore it on non-DRIVER_LEGACY drivers since: commit ea487835e8876abf7ad909636e308c801a2bcda6 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Sep 28 21:42:40 2015 +0200 drm: Enforce unlocked ioctl operation for kms driver ioctls Now justifying why we can do this for legacy drives too (and hence close the source of all the bogus copypasting) is a bit more involved. DRM_UNLOCKED was introduced in: commit ed8b67040965e4fe695db333d5914e18ea5f146f Author: Arnd Bergmann <arnd@arndb.de> Date: Wed Dec 16 22:17:09 2009 +0000 drm: convert drm_ioctl to unlocked_ioctl As a immediate hack to keep i810 happy, which would have deadlocked without this trickery. The old BKL is automatically dropped in schedule(), and hence the i810 vs. mmap_sem deadlock didn't actually cause a real deadlock. But with a mutex it would. The solution was to annotate these as DRM_UNLOCKED and mark i810 unsafe on SMP machines. This conversion caused a regression, because unlike the BKL a mutex isn't dropped over schedule (that thing again), which caused a vblank wait in one thread to block the entire desktop and all its apps. Back then we did vblank scheduling by blocking in the client, awesome isn't it. This was fixed quickly in (ok not so quickly, took 2 years): commit 8f4ff2b06afcd6f151868474a432c603057eaf56 Author: Ilija Hadzic <ihadzic@research.bell-labs.com> Date: Mon Oct 31 17:46:18 2011 -0400 drm: do not sleep on vblank while holding a mutex All the other DRM_UNLOCKED annotations for all the core ioctls was work to reach finer-grained locking for modern drivers. This took years, and culminated in: commit fdd5b877e9ebc2029e1373b4a3cd057329a9ab7a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 10 22:52:54 2016 +0100 drm: Enforce BKL-less ioctls for modern drivers DRM_UNLOCKED was never required by any legacy drivers, except for the vblank_wait IOCTL. Therefore we will not regress these old drivers by going back to where we've been in 2011. For all modern drivers nothing will change. To make this perfectly clear, also add a comment to DRM_UNLOCKED. v2: Don't forget about drm_ioc32.c (Michel). Cc: Michel Dänzer <michel@daenzer.net> Cc: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605120835.2798-1-daniel.vetter@ffwll.ch
2019-05-27drm: drop use of drmP.h in drm/*Sam Ravnborg
The use of the drmP.h header file is deprecated. Remove use from all files in drm/* so people do not look there and follow a bad example. Build tested allyesconfig,allmodconfig on x86, arm etc. Including alpha that is as always more challenging than the rest. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2019-05-02drm: introduce a capability flag for syncobj timeline supportLionel Landwerlin
Unfortunately userspace users of this API cannot be publicly disclosed yet. This commit effectively disables timeline syncobj ioctls for all drivers. Each driver wishing to support this feature will need to expose DRIVER_SYNCOBJ_TIMELINE. v2: Add uAPI capability check (Christian) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416125750.31370-1-lionel.g.landwerlin@intel.com
2019-04-24drm: allow removal of legacy codepaths (v4.1)Dave Airlie
If you don't want the legacy drivers, then lets get rid of all the legacy codepaths from the core module. This drop the size of drm.ko for me by about 10%. 380515 7422 4192 392129 5fbc1 ../../drm-next-build/drivers/gpu/drm/drm.ko 351736 7298 4192 363226 58ada ../../drm-next-build/drivers/gpu/drm/drm.ko v2: drop drm_lock as well, fix some DMA->DRM typos v3: avoid ifdefs in mainline code v4: rework ioctl defs v4.1: fix nouveau Kconfig Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-18Revert "drm: allow render capable master with DRM_AUTH ioctls"Dave Airlie
This reverts commit 8059add0478e29cb641936011a8fcc9ce9fd80be. This commit while seemingly a good idea, breaks a radv check, for a node being master because something succeeds where it failed before now. Apply the Linus rule, revert early and try again, we don't break userspace. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-01drm/syncobj: add timeline signal ioctl for syncobj v5Chunming Zhou
v2: individually allocate chain array, since chain node is free independently. v3: all existing points must be already signaled before cpu perform signal operation, so add check condition for that. v4: remove v3 change and add checking to prevent out-of-order v5: unify binary and timeline Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Tobias Hector <Tobias.Hector@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295792/?series=58813&rev=1
2019-04-01drm/syncobj: add transition iotcls between binary and timeline v2Chunming Zhou
we need to import/export timeline point. v2: unify to one transfer ioctl Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295790/?series=58813&rev=1
2019-04-01drm/syncobj: add timeline payload query ioctl v6Chunming Zhou
user mode can query timeline payload. v2: check return value of copy_to_user v3: handle querying entry by entry v4: rebase on new chain container, simplify interface v5: query last signaled timeline point, not last point. v6: add unorder point check Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Tobias Hector <Tobias.Hector@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295784/?series=58813&rev=1
2019-04-01drm/syncobj: add support for timeline point wait v8Chunming Zhou
points array is one-to-one match with syncobjs array. v2: add seperate ioctl for timeline point wait, otherwise break uapi. v3: userspace can specify two kinds waits:: a. Wait for time point to be completed. b. and wait for time point to become available v4: rebase v5: add comment for xxx_WAIT_AVAILABLE v6: rebase and rework on new container v7: drop _WAIT_COMPLETED, it is the default anyway v8: correctly handle garbage collected fences Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: Tobias Hector <Tobias.Hector@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295782/?series=58813&rev=1
2019-02-13drm: allow render capable master with DRM_AUTH ioctlsEmil Velikov
There are cases (in mesa and applications) where one would open the primary node without properly authenticating the client. Sometimes we don't check if the authentication succeeds, but there's also cases we simply forget to do it. The former was a case for Mesa where it did not not check the return value of drmGetMagic() [1]. That was fixed recently although, there's the question of older drivers or other apps that exbibit this behaviour. While omitting the call results in issues as seen in [2] and [3]. In the libva case, libva itself doesn't authenticate the DRM client and the vaGetDisplayDRM documentation doesn't mention if the app should either. As of today, the official vainfo utility doesn't authenticate. To workaround issues like these, some users resort to running their apps under sudo. Which admittedly isn't always a good idea. Since any DRIVER_RENDER driver has sufficient isolation between clients, we can use that, for unauthenticated [primary node] ioctls that require DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW. v2: - Rework/simplify if check (Daniel V) - Add examples to commit messages, elaborate. (Daniel V) v3: - Use single unlikely (Daniel V) [1] https://gitlab.freedesktop.org/mesa/mesa/blob/2bc1f5c2e70fe3b4d41f060af9859bc2a94c5b62/src/egl/drivers/dri2/platform_wayland.c#L1136 [2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html [3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1 Testcase: igt/core_unauth_vs_render Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
2019-02-13drm: drop DRM_AUTH requirement from AUTH_MAGIC ioctlEmil Velikov
Currently only an authenticated master can authenticate another client. In practise the client can only be master if CAP_SYS_ADMIN is present, although having the CAP also sets the client as authenticated. Thus DRM_AUTH in AUTH_MAGIC's "DRM_AUTH | DRM_MASTER" is superfluous. Notices while working on IGT tests. Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190114084305.15141-1-emil.l.velikov@gmail.com
2018-12-20drm/ioctl: Fix Spectre v1 vulnerabilitiesGustavo A. R. Silva
nr is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_ioctl.c:805 drm_ioctl() warn: potential spectre issue 'dev->driver->ioctls' [r] drivers/gpu/drm/drm_ioctl.c:810 drm_ioctl() warn: potential spectre issue 'drm_ioctls' [r] (local cap) drivers/gpu/drm/drm_ioctl.c:892 drm_ioctl_flags() warn: potential spectre issue 'drm_ioctls' [r] (local cap) Fix this by sanitizing nr before using it to index dev->driver->ioctls and drm_ioctls. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181220000015.GA18973@embeddedor
2018-09-21drm: Return -EOPNOTSUPP in drm_setclientcap() when driver do not support KMSJosé Roberto de Souza
All DRM_CLIENT capabilities are tied to KMS support, so returning -EOPNOTSUPP when KMS is not supported. v2: returning -EOPNOTSUPP(same value as posix ENOTSUP and available in uapi) instead of -ENOTSUPP v3: adding comments about the feature requirement about capabilities Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180918174809.17123-1-jose.souza@intel.com
2018-09-14drm: Differentiate the lack of an interface from invalid parameterChris Wilson
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
2018-09-10drm: refuse ADDFB2 ioctl for broken bigendian driversGerd Hoffmann
Drivers must set the quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb() compat code work correctly on bigendian machines. If they don't they interpret pixel_format values incorrectly for bug compatibility, which in turn implies the ADDFB2 ioctl does not work correctly then. So block it to make userspace fallback to ADDFB. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180907073213.20410-1-kraxel@redhat.com
2018-07-13drm: drop _mode_ from remaining connector functionsDaniel Vetter
Since there's very few callers of these I've decided to do them all in one patch. With this the unecessarily long drm_mode_connector_ prefix is gone from the codebase! The only exception being struct drm_mode_connector_set_property, which is part of the uapi so can't be renamed. Again done with sed+some manual fixups for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch
2018-06-25drm: Make ioctls available for in-kernel clientsNoralf Trønnes
Make ioctl wrappers for functions that will be used by the in-kernel API. The following functions are touched: - drm_mode_create_dumb_ioctl() - drm_mode_destroy_dumb_ioctl() - drm_mode_addfb() - drm_mode_rmfb() Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-4-noralf@tronnes.org
2018-06-20drm: writeback: Add client capability for exposing writeback connectorsLiviu Dudau
Due to the fact that writeback connectors behave in a special way in DRM (they always report being disconnected) we might confuse some userspace. Add a client capability for writeback connectors that will filter them out for clients that don't understand the capability. Changelog: - only accept the capability if the client has already set the DRM_CLIENT_CAP_ATOMIC one. Cc: Sean Paul <seanpaul@chromium.org> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Link: https://patchwork.freedesktop.org/patch/229038/
2018-05-11drm: Add DRM client cap for aspect-ratioAnkit Nautiyal
To enable aspect-ratio support in DRM, blindly exposing the aspect ratio information along with mode, can break things in existing non-atomic user-spaces which have no intention or support to use this aspect ratio information. To avoid this, a new drm client cap is required to enable a non-atomic user-space to advertise if it supports modes with aspect-ratio. Based on this cap value, the kernel will take a call on exposing the aspect ratio info in modes or not. This patch adds the client cap for aspect-ratio. Since no atomic-userspaces blow up on receiving aspect-ratio information, the client cap for aspect-ratio is always enabled for atomic clients. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: rebase V4: As suggested by Marteen Lankhorst modified the commit message explaining the need to use the DRM cap for aspect-ratio. Also, tweaked the comment lines in the code for better understanding and clarity, as recommended by Shashank Sharma. V5: rebase V6: rebase V7: rebase V8: rebase V9: rebase V10: rebase V11: rebase V12: As suggested by Daniel Vetter and Ville Syrjala, always enable aspect-ratio client cap for atomic userspaces, if no atomic userspace breaks on aspect-ratio bits. V13: rebase V14: rebase Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-7-git-send-email-ankit.k.nautiyal@intel.com
2018-05-03drm: remove all control node codeDaniel Vetter
With the ioctl and driver prep done, we can remove everything else. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-4-daniel.vetter@ffwll.ch
2018-05-03drm: Drop DRM_CONTROL_ALLOW from ioctlsDaniel Vetter
We've disabled control nodes in commit 8a357d10043c75e980e7fcdb60d2b913491564af Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Oct 28 10:10:50 2016 +0200 drm: Nerf DRM_CONTROL nodes and there was only a minor uapi break that we've paper over with commit 6449b088dd51dd5aa6b38455888bbf538d21f2fc Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Dec 9 14:56:56 2016 +0100 drm: Add fake controlD* symlinks for backwards compat Since then Keith has also added real control nodes with a proper&useable uapi in the form of drm leases. It's time to remove the control node leftovers. Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-1-daniel.vetter@ffwll.ch
2018-02-10drm: Print the pid when debug logging an ioctl error.Eric Anholt
When we debug print what ioctl we're calling into, we include the pid. If you have multiple processes rendering simulataneously, the error return also needs the pid so you can see which of the ioctl calls was the one to fail. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180130215643.11016-1-eric@anholt.net Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-01-11drm/ioctl: Remove trailing whitespaceNoralf Trønnes
Remove a couple of trailing spaces. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180103222110.45855-3-noralf@tronnes.org
2017-10-25drm: Add four ioctls for managing drm mode object leases [v7]Keith Packard
drm_mode_create_lease Creates a lease for a list of drm mode objects, returning an fd for the new drm_master and a 64-bit identifier for the lessee drm_mode_list_lesees List the identifiers of the lessees for a master file drm_mode_get_lease List the leased objects for a master file drm_mode_revoke_lease Erase the set of objects managed by a lease. This should suffice to at least create and query leases. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * query ioctls only query the master associated with the provided file. * 'mask_lease' value has been removed * change ioctl has been removed. Changes for v3 suggested in part by Dave Airlie <airlied@gmail.com> * Add revoke ioctl. Changes for v4 suggested by Dave Airlie <airlied@gmail.com> * Expand on the comment about the magic use of &drm_lease_idr_object * Pad lease ioctl structures to align on 64-bit boundaries Changes for v5 suggested by Dave Airlie <airlied@gmail.com> * Check for non-negative object_id in create_lease to avoid debug output from the kernel. Changes for v6 provided by Dave Airlie <airlied@gmail.com> * For non-universal planes add primary/cursor planes to lease If we aren't exposing universal planes to this userspace client, and it requests a lease on a crtc, we should implicitly export the primary and cursor planes for the crtc. If the lessee doesn't request universal planes, it will just see the crtc, but if it does request them it will then see the plane objects as well. This also moves the object look ups earlier as a side effect, so we'd exit the ioctl quicker for non-existant objects. * Restrict leases to crtc/connector/planes. This only allows leasing for objects we wish to allow. Changes for v7 provided by Dave Airlie <airlied@gmail.com> * Check pad args are 0 * Check create flags and object count are valid. * Check return from fd allocation * Refactor lease idr setup and add some simple validation * Use idr_mutex uniformly (Keith) Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-23drm: Add CRTC_GET_SEQUENCE and CRTC_QUEUE_SEQUENCE ioctls [v3]Keith Packard
These provide crtc-id based functions instead of pipe-number, while also offering higher resolution time (ns) and wider frame count (64) as required by the Vulkan API. v2: * Check for DRIVER_MODESET in new crtc-based vblank ioctls Failing to check this will oops the driver. * Ensure vblank interupt is running in crtc_get_sequence ioctl The sequence and timing values are not correct while the interrupt is off, so make sure it's running before asking for them. * Short-circuit get_sequence if the counter is enabled and accurate Steal the idea from the code in wait_vblank to avoid the expense of drm_vblank_get/put * Return active state of crtc in crtc_get_sequence ioctl Might be useful for applications that aren't in charge of modesetting? * Use drm_crtc_vblank_get/put in new crtc-based vblank sequence ioctls Daniel Vetter prefers these over the old drm_vblank_put/get APIs. * Return s64 ns instead of u64 in new sequence event Suggested-by: Daniel Vetter <daniel@ffwll.ch> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> v3: * Removed FIRST_PIXEL_OUT_FLAG * Document that the timestamp in the query and event are that of the first pixel leaving the display engine for the display (using the same wording as the Vulkan spec). Suggested-by: Michel Dänzer <michel@daenzer.net> Acked-by: Dave Airlie <airlied@redhat.com> [airlied: left->leaves (Michel)] Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-13drm: vblank: remove drm_timestamp_monotonic parameterArnd Bergmann
There is a risk of overflowing vblank timestamps in 2038 or 2106 if someone sets the drm_timestamp_monotonic module parameter to zero. I found no indication of anyone ever setting the parameter, or complaining about the default being wrong, after it was introduced as a way to handle backwards-compatibility with linux prior to c61eef726a78 ("drm: add support for monotonic vblank timestamps"), so it's probably safer to just remove the parameter completely and only allowing the default behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-29drm/syncobj: Add a signal ioctl (v3)Jason Ekstrand
This IOCTL provides a mechanism for userspace to trigger a sync object directly. There are other ways that userspace can trigger a syncobj such as submitting a dummy batch somewhere or hanging on to a triggered sync_file and doing an import. This just provides an easy way to manually trigger the sync object without weird hacks. The motivation for this IOCTL is Vulkan fences. Vulkan lets you create a fence already in the signaled state so that you can wait on it immediatly without stalling. We could also handle this with a new create flag to ask the driver to create a syncobj that is already signaled but the IOCTL seemed a bit cleaner and more generic. v2: - Take an array of sync objects (Dave Airlie) v3: - Throw -EINVAL if pad != 0 Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-29drm/syncobj: Add a reset ioctl (v3)Jason Ekstrand
This just resets the dma_fence to NULL so it looks like it's never been signaled. This will be useful once we add the new wait API for allowing wait on "submit and signal" behavior. v2: - Take an array of sync objects (Dave Airlie) v3: - Throw -EINVAL if pad != 0 Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-29drm/syncobj: add sync obj wait interface. (v8)Dave Airlie
This interface will allow sync object to be used to back Vulkan fences. This API is pretty much the vulkan fence waiting API, and I've ported the code from amdgpu. v2: accept relative timeout, pass remaining time back to userspace. v3: return to absolute timeouts. v4: absolute zero = poll, rewrite any/all code to have same operation for arrays return -EINVAL for 0 fences. v4.1: fixup fences allocation check, use u64_to_user_ptr v5: move to sec/nsec, and use timespec64 for calcs. v6: use -ETIME and drop the out status flag. (-ETIME is suggested by ickle, I can feel a shed painting) v7: talked to Daniel/Arnd, use ktime and ns everywhere. v8: be more careful in the timeout calculations use uint32_t for counter variables so we don't overflow graciously handle -ENOINT being returned from dma_fence_wait_timeout Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-11drm: Document device unplug infrastructureDaniel Vetter
While at it, also ocd and give them a consistent drm_dev_ prefix, like the other device instance functionality. Plus move the functions into the right places. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170802115604.12734-3-daniel.vetter@ffwll.ch
2017-07-26Merge airlied/drm-next into drm-misc-nextDaniel Vetter
I need this to be able to apply the deferred fbdev setup patches, I need the relevant prep work that landed through the drm-intel tree. Also squash in conflict fixup from Laurent Pinchart. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-09Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main pull request for the drm, I think I've got one later driver pull for mediatek SoC driver, I'm undecided on if it needs to go to you yet. Otherwise summary below: Core drm: - Atomic add driver private objects - Deprecate preclose hook in modern drivers - MST bandwidth tracking - Use kvmalloc in more places - Add mode_valid hook for crtc/encoder/bridge - Reduce sync_file construction time - Documentation updates - New DRM synchronisation object support New drivers: - pl111 - pl111 CLCD display controller Panel: - Innolux P079ZCA panel driver - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels - panel-samsung-s6e3ha2: Add s6e3hf2 panel support i915: - SKL+ watermark fixes - G4x/G33 reset improvements - DP AUX backlight improvements - Buffer based GuC/host communication - New getparam for (sub)slice infomation - Cannonlake and Coffeelake initial patches - Execbuf optimisations radeon/amdgpu: - Lots of Vega10 bug fixes - Preliminary raven support - KIQ support for compute rings - MEC queue management rework - DCE6 Audio support - SR-IOV improvements - Better radeon/amdgpu selection support nouveau: - HDMI stereoscopic support - Display code rework for >= GM20x GPUs msm: - GEM rework for fine-grained locking - Per-process pagetable work - HDMI fixes for Snapdragon 820. vc4: - Remove 256MB CMA limit from vc4 - Add out-fence support - Add support for cygnus - Get/set tiling ioctls support - Add T-format tiling support for scanout zte: - add VGA support. etnaviv: - Thermal throttle support for newer GPUs - Restore userspace buffer cache performance - dma-buf sync fix stm: - add stm32f429 display support exynos: - Rework vblank handling - Fixup sw-trigger code sun4i: - V3s display engine support - HDMI support for older SoCs - Preliminary work on dual-pipeline SoCs. rcar-du: - VSP work imx-drm: - Remove counter load enable from PRE - Double read/write reduction flag support tegra: - Documentation for the host1x and drm driver. - Lots of staging ioctl fixes due to grate project work. omapdrm: - dma-buf fence support - TILER rotation fixes" * tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits) drm: Remove unused drm_file parameter to drm_syncobj_replace_fence() drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu. amdgpu: Set cik/si_support to 1 by default if radeon isn't built drm/amdgpu/gfx9: fix driver reload with KIQ drm/amdgpu/gfx8: fix driver reload with KIQ drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay drm/ttm: Fix use-after-free in ttm_bo_clean_mm drm/amd/amdgpu: move get memory type function from early init to sw init drm/amdgpu/cgs: always set reference clock in mode_info drm/amdgpu: fix vblank_time when displays are off drm/amd/powerplay: power value format change for Vega10 drm/amdgpu/gfx9: support the amdgpu.disable_cu option drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10 drm/amdgpu: Make amdgpu_cs_parser_init static (v2) drm/amdgpu/cs: fix a typo in a comment drm/amdgpu: Fix the exported always on CU bitmap drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup drm/amd/powerplay/cz: print message if smc message fails drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init ...
2017-07-04mga: switch compat ioctls to drm_ioctl_kernel()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-27Merge remote-tracking branch 'airlied/drm-next' into drm-misc-nextSean Paul
Required for Daniel's drm_vblank_cleanup cleanup
2017-06-21drm: Check for drm_device->dev in drm_set_busidDaniel Vetter
I've failed to remember that we have virtual drivers like vgem which have no underlying struct device. Fix this asap. Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 5c484cee7ef9 ("drm: Remove drm_driver->set_busid hook") Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170621130429.20537-1-daniel.vetter@ffwll.ch
2017-06-20drm/doc: Improve ioctl/fops docs a bit moreDaniel Vetter
I spotted a markup issue, plus adding the descriptions in drm_driver. Plus a few more links while at it. I'm still mildly unhappy with the split between fops and ioctls, but I still think having the ioctls in the uapi chapter makes more sense. Oh well ... v2: Rebase. v3: Move misplace hunk to the right patch. Cc: Stefan Agner <stefan@agner.ch> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531092045.3950-1-daniel.vetter@ffwll.ch
2017-06-20drm: Remove drm_driver->set_busid hookDaniel Vetter
The only special-case is pci devices, and we can easily handle this in the core. Do so and drop a pile of boilerplate from drivers. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-5-daniel.vetter@ffwll.ch
2017-06-20drm/vblank: _ioctl posfix for ioctl handlerDaniel Vetter
I alwasy get confused about drm_wait_vblank for a split second until I realize it's the ioctl handler. Unconfuse me, and do it for the legacy modeset vblank control ioctl too. While at it also noticed that I misplaced the irq ioctl handler in the internal header file. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-12-daniel.vetter@ffwll.ch
2017-06-14drm: introduce sync objects (v4)Dave Airlie
Sync objects are new toplevel drm object, that contain a pointer to a fence. This fence can be updated via command submission ioctls via drivers. There is also a generic wait obj API modelled on the vulkan wait API (with code modelled on some amdgpu code). These objects can be converted to an opaque fd that can be passes between processes. v2: rename reference/unreference to put/get (Chris) fix leaked reference (David Zhou) drop mutex in favour of cmpxchg (Chris) v3: cleanups from danvet, rebase on drm_fops rename check fd_flags is 0 in ioctls. v4: export find/free, change replace fence to take a syncobj. In order to support lookup first, replace later semantics which seem in the end to be cleaner. Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-05-27switch compat_drm_getclient() to drm_ioctl_kernel()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-27switch compat_drm_getunique() to drm_ioctl_kernel()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2024-05-30 10:43:46 +0000