| Age | Commit message (Collapse) | Author |
|---|
|
The function mipi_dbi_spi1_transfer() will transfer its payload as 9-bit
data, the 9th (MSB) bit being the data/command bit. In order to do that,
it unpacks the 8-bit values into 16-bit values, then sets the 9th bit if
the byte corresponds to data, clears it otherwise. The 7 MSB are
padding. The array of now 16-bit values is then passed to the SPI core
for transfer.
This function was broken since its introduction, as the length of the
SPI transfer was set to the payload size before its conversion, but the
payload doubled in size due to the 8-bit -> 16-bit conversion.
Fixes: 02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703141341.1266263-1-paul@crapouillou.net
|
|
Allows us to drop the drm_driver.release callback from all
drivers, and remove the mipi_dbi_release() function.
This is made possible by a preceeding patch which added a drmm_
cleanup action to drm_mode_config_init(), hence all we need to do to
ensure that drm_mode_config_cleanup() is run on final drm_device
cleanup is check the new error code for _init().
v2: Explain why this cleanup is possible (Laurent).
v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v2)
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-49-daniel.vetter@ffwll.ch
|
|
7/7 drivers agree that's the right choice, let's do this.
This avoids duplicating the same old error checking code over all 7
drivers, which is the motivation here.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-48-daniel.vetter@ffwll.ch
|
|
It has become empty. Given the few users I figured not much point
splitting this up.
v2: Rebase over i915 changes.
v3: Rebase over patch split fix.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-26-daniel.vetter@ffwll.ch
|
|
They all share mipi_dbi_release so we need to switch them all
together. With this we can drop the final kfree from the release
function.
Aside, I think we could perhaps have a tiny additional helper for
these mipi_dbi drivers, the first few lines around devm_drm_dev_init
are all the same (except for the drm_driver pointer).
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-6-daniel.vetter@ffwll.ch
|
|
mipi_dbi_command_stackbuf() copies the passed buffer data, so it can be
const.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316164249.6234-1-geert+renesas@glider.be
|
|
As a result of commit 987d65d01356 (drm: debugfs: make
drm_debugfs_create_files() never fail) and changes to various debugfs
functions in drm/core and across various drivers, there is no need for
the drm_driver.debugfs_init() hook to have a return value. Therefore,
declare it as void.
This also includes refactoring all users of the .debugfs_init() hook to
return void across the subsystem.
v2: include changes to the hook and drivers that use it in one patch to
prevent driver breakage and enable individual successful compilation of
this change.
References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com
|
|
The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.
v4:
* separate commit from core vblank changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-9-tzimmermann@suse.de
|
|
If the resolution of the TFT display is smaller than the maximum
resolution supported by the display controller, the display may be
connected to the driver output arrays with a horizontal and/or vertical
offset, leading to a shifted image.
Add support for specifying these offsets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-4-geert+renesas@glider.be
|
|
When configuring the frame memory window, the last column and row
numbers are written to the column resp. page address registers. These
numbers are thus one less than the actual window width resp. height.
While this is handled correctly in mipi_dbi_fb_dirty() since commit
03ceb1c8dfd1e293 ("drm/tinydrm: Fix setting of the column/page end
addresses."), it is not in mipi_dbi_blank(). The latter still forgets
to subtract one when calculating the most significant bytes of the
column and row numbers, thus programming wrong values when the display
width or height is a multiple of 256.
Fixes: 02dd95fe31693626 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230130604.31006-1-geert+renesas@glider.be
|
|
GCC complains about dubious bitwise OR operand:
drivers/gpu/drm/drm_mipi_dbi.c:1024:49: warning: dubious: x | !y
CC [M] drivers/gpu/drm/drm_mipi_dbi.o
As long as buffer is consist of byte (u8) values, we may use
simple right shift and satisfy compiler. It also reduces amount of
operations needed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017114912.61522-1-andriy.shevchenko@linux.intel.com
|
|
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.
v2: Move unlikely() to drm_debug_enabled() (Eric)
v3: Keep unlikely() when combined with other conditions (Eric)
Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
|
|
- it's what we recommend in our docs:
https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html#recommended-ioctl-return-values
- it's the overwhelmingly used error code for "operation not
supported", at least in drm core (slightly less so in drivers):
$ git grep EOPNOTSUPP -- drivers/gpu/drm/*c | wc -l
83
$ git grep ENOTSUPP -- drivers/gpu/drm/*c | wc -l
5
- include/linux/errno.h makes it fairly clear that these are for nfsv3
(plus they also have error codes above 512, which is the block with
some special behaviour ...)
/* Defined for the NFSv3 protocol */
If the above isn't reflecting current practice, then I guess we should
at least update the docs.
Noralf commented:
Ben Hutchings made this comment[1] in a thread about use of ENOTSUPP in
drivers:
glibc's strerror() returns these strings for ENOTSUPP and EOPNOTSUPP
respectively:
"Unknown error 524"
"Operation not supported"
So at least for errors returned to userspace EOPNOTSUPP makes sense.
José asked:
> Hopefully this will not break any userspace
None of the functions in drm_edid.c affected by this reach userspace,
it's all driver internal.
Same for the mipi function, that error code should be handled by
drivers. Drivers are supposed to remap "the hw is on fire" to EIO when
reporting up to userspace, but I think if a driver sees this it would
be a driver bug.
v2: Augment commit message with comments from Noralf and José
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andres Rodriguez <andresx7@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904143942.31756-1-daniel.vetter@ffwll.ch
|
|
This code will likely crash if we try to do a zero byte write. The code
looks like this:
/* strip trailing whitespace */
for (i = count - 1; i > 0; i--)
if (isspace(buf[i]))
...
We're writing zero bytes so count = 0. You would think that "count - 1"
would be negative one, but because "i" is unsigned it is a large
positive numer instead. The "i > 0" condition is true and the "buf[i]"
access will be out of bounds.
The fix is to make "i" signed and now everything works as expected. The
upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so
we don't have to worry about it being higher than INT_MAX.
Fixes: 02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[noralf: Adjust title]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda
|
|
This moves mipi-dbi to be a core helper with the name drm_mipi_dbi.
Fixup include's in drivers.
Move the docs entry and delete tinydrm.rst.
Delete the last tinydrm todo entry.
v2: Make DRM_MIPI_DBI tristate to enable it being built as a module.
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-9-noralf@tronnes.org
|
