summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_mm.c
AgeCommit message (Collapse)Author
2019-02-04drm: Trivial comment grammar cleanupsMatt Roper
Most of these are just cases where code comments used contractions (it's, who's) where they actually mean to use a possessive pronoun (its, whose) or vice-versa. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com
2018-05-24drm/mm: Add a search-by-address variant to only inspect a single holeChris Wilson
Searching for an available hole by address is slow, as there no guarantee that a hole will be available and so we must walk over all nodes in the rbtree before we determine the search was futile. In many cases, the caller doesn't strictly care for the highest available hole and was just opportunistically laying out the address space in a preferred order. In such cases, the caller can accept any address and would rather do so then do a slow walk. To be able to mix search strategies, the caller wants to tell the drm_mm how long to spend on the search. Without a good guide for what should be the best split, start with a request to try once at most. That is return the top-most (or lowest) hole if it fulfils the alignment and size requirements. v2: Documentation, by why of example (selftests) and kerneldoc. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-2-chris@chris-wilson.co.uk
2018-05-24drm/mm: Reject over-sized allocation requests earlyChris Wilson
As we keep an rbtree of available holes sorted by their size, we can very easily determine if there is any hole large enough that might satisfy the allocation request. This helps when dealing with a highly fragmented address space and a request for a search by address. To cache the largest size, we convert into the cached rbtree variant which tracks the leftmost node for us. However, currently we sorted into ascending size order so the leftmost node is the smallest, and so to make it the largest hole we need to invert our sorting. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-1-chris@chris-wilson.co.uk
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-02-22Merge tag 'drm-misc-fixes-2018-02-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for 4.16. I contains fixes for deadlock on runtime suspend on few drivers, a memory leak on non-blocking commits, a crash on color-eviction. The is also meson and edid fixes, plus a fix for a doc warning. * tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc: drm/tve200: fix kernel-doc documentation comment include drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker workqueue: Allow retrieval of current task's work struct drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits
2018-02-20drm/mm: Fix caching of leftmost node in the interval treeChris Wilson
When we descend the tree to find our slot, if we step to the right, we are no longer the leftmost node. Fixes: f808c13fd373 ("lib/interval_tree: fast overlap detection") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> for now. Link: https://patchwork.freedesktop.org/patch/msgid/20180220093738.1461-1-chris@chris-wilson.co.uk
2018-02-20drm: Handle unexpected holes in color-evictionChris Wilson
During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489dabea9 ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.uk
2017-12-19BackMerge tag 'v4.15-rc4' into drm-nextDave Airlie
Linux 4.15-rc4 Daniel requested it to fix some messy conflicts.
2017-12-14lib/rbtree,drm/mm: add rbtree_replace_node_cached()Chris Wilson
Add a variant of rbtree_replace_node() that maintains the leftmost cache of struct rbtree_root_cached when replacing nodes within the rbtree. As drm_mm is the only rb_replace_node() being used on an interval tree, the mistake looks fairly self-contained. Furthermore the only user of drm_mm_replace_node() is its testsuite... Testcase: igt/drm_mm/replace Link: http://lkml.kernel.org/r/20171122100729.3742-1-chris@chris-wilson.co.uk Link: https://patchwork.freedesktop.org/patch/msgid/20171109212435.9265-1-chris@chris-wilson.co.uk Fixes: f808c13fd373 ("lib/interval_tree: fast overlap detection") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02drm: Spelling fixesLiviu Dudau
Minor spelling fix for 'monster' and replace 'on' with 'own' in comments. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101140436.2743-1-Liviu.Dudau@arm.com
2017-09-08lib/interval_tree: fast overlap detectionDavidlohr Bueso
Allow interval trees to quickly check for overlaps to avoid unnecesary tree lookups in interval_tree_iter_first(). As of this patch, all interval tree flavors will require using a 'rb_root_cached' such that we can have the leftmost node easily available. While most users will make use of this feature, those with special functions (in addition to the generic insert, delete, search calls) will avoid using the cached option as they can do funky things with insertions -- for example, vma_interval_tree_insert_after(). [jglisse@redhat.com: fix deadlock from typo vm_lock_anon_vma()] Link: http://lkml.kernel.org/r/20170808225719.20723-1-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170719014603.19029-12-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Doug Ledford <dledford@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Jason Wang <jasowang@redhat.com> Cc: Christian Benvenuti <benve@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-06drm: Micro-optimise drm_mm_for_each_node_in_range()Chris Wilson
As we require valid start/end parameters, we can replace the initial potential NULL with a pointer to the drm_mm.head_node and so reduce the test on every iteration from a NULL + address comparison to just an address comparison. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-26 (-26) function old new delta i915_gem_evict_for_node 719 693 -26 (No other users outside of the test harness.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170204111913.12416-1-chris@chris-wilson.co.uk
2017-02-03drm: Improve drm_mm search (and fix topdown allocation) with rbtreesChris Wilson
The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-01-25drm/gem|prime|mm: Use recommened kerneldoc for struct member refsDaniel Vetter
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-5-daniel.vetter@ffwll.ch
2016-12-30drm/mm: Some doc polishDaniel Vetter
Added some boilerplate for the structs, documented members where they are relevant and plenty of markup for hyperlinks all over. And a few small wording polish. Note that the intro needs some more love after the DRM_MM_INSERT_* patch from Chris has landed. v2: Spelling fixes (Chris). v3: Use &struct foo instead of &foo structure (Chris). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-3-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm/mm: Convert to drm_printerDaniel Vetter
Including all drivers. I thought about keeping small compat functions to avoid having to change all drivers. But I really like the drm_printer idea, so figured spreading it more widely is a good thing. v2: Review from Chris: - Natural argument order and better name for drm_mm_print. - show_mm() macro in the selftest. Cc: Rob Clark <robdclark@gmail.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jyri Sarha <jsarha@ti.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483009764-8281-1-git-send-email-daniel.vetter@ffwll.ch
2016-12-28drm: Add kerneldoc markup for new @scan parameters in drm_mmChris Wilson
A couple of parameters slipped through the kerneldoc net. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161228105120.14500-1-chris@chris-wilson.co.uk
2016-12-28drm/mm: Document locking rulesDaniel Vetter
Drivers need to take care. Motivated by a discussion between Mark and Rob on dri-devel. Cc: Mark yao <mark.yao@rock-chips.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: s/alloc|freeing/modifications/ per Chris' suggestion.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1482833457-29592-1-git-send-email-daniel.vetter@ffwll.ch
2016-12-28drm: Use drm_mm_insert_node_in_range_generic() for everyoneChris Wilson
Remove a superfluous helper as drm_mm_insert_node is equivalent to insert_node_in_range with a range of [0, U64_MAX]. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-37-chris@chris-wilson.co.uk
2016-12-28drm: Apply range restriction after color adjustment when allocationChris Wilson
mm->color_adjust() compares the hole with its neighbouring nodes. They only abutt before we restrict the hole, so we have to apply color_adjust before we apply the range restriction. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-36-chris@chris-wilson.co.uk
2016-12-28drm: Wrap drm_mm_node.hole_followsChris Wilson
Insulate users from changes to the internal hole tracking within struct drm_mm_node by using an accessor for hole_follows. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> [danvet: resolve conflicts in i915_vma.c] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-12-28drm: Apply tight eviction scanning to color_adjustChris Wilson
Using mm->color_adjust makes the eviction scanner much tricker since we don't know the actual neighbours of the target hole until after it is created (after scanning is complete). To work out whether we need to evict the neighbours because they impact upon the hole, we have to then check the hole afterwards - requiring an extra step in the user of the eviction scanner when they apply color_adjust. v2: Massage kerneldoc. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-34-chris@chris-wilson.co.uk
2016-12-28drm: Simplify drm_mm scan-list manipulationChris Wilson
Since we mandate a strict reverse-order of drm_mm_scan_remove_block() after drm_mm_scan_add_block() we can further simplify the list manipulations when generating the temporary scan-hole. v2: Highlight the games being played with the lists to track the scan holes without allocation. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-33-chris@chris-wilson.co.uk
2016-12-28drm: Optimise power-of-two alignments in drm_mm_scan_add_block()Chris Wilson
For power-of-two alignments, we can avoid the 64bit divide and do a simple bitwise add instead. v2: s/alignment_mask/remainder_mask/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-32-chris@chris-wilson.co.uk
2016-12-28drm: Compute tight evictions for drm_mm_scanChris Wilson
Compute the minimal required hole during scan and only evict those nodes that overlap. This enables us to reduce the number of nodes we need to evict to the bare minimum. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-31-chris@chris-wilson.co.uk
2016-12-28drm: Fix application of color vs range restriction when scanning drm_mmChris Wilson
The range restriction should be applied after the color adjustment, or else we may inadvertently apply the color adjustment to the restricted hole (and not against its neighbours). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-30-chris@chris-wilson.co.uk
2016-12-28drm: Unconditionally do the range check in drm_mm_scan_add_block()Chris Wilson
Doing the check is trivial (low cost in comparison to overall eviction) and helps simplify the code. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-29-chris@chris-wilson.co.uk
2016-12-28drm: Rename prev_node to hole in drm_mm_scan_add_block()Chris Wilson
Acknowledging that we were building up the hole was more useful to me when reading the code, than knowing the relationship between this node and the previous node. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-28-chris@chris-wilson.co.uk
2016-12-27drm: Extract struct drm_mm_scan from struct drm_mmChris Wilson
The scan state occupies a large proportion of the struct drm_mm and is rarely used and only contains temporary state. That makes it suitable to moving to its struct and onto the stack of the callers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> [danvet: Fix up etnaviv to compile, was missing a BUG_ON.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-12-27drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan()Chris Wilson
A simple assert to ensure that we don't overflow start + size when initialising the drm_mm, or its scanner. In future, we may want to switch to tracking the value of ranges (rather than size) so that we can cover the full u64, for example like resource tracking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-26-chris@chris-wilson.co.uk
2016-12-27drm: Simplify drm_mm_clean()Chris Wilson
Since commit ea7b1dd44867 ("drm: mm: track free areas implicitly"), to test whether there are any nodes allocated within the range manager, we merely have to ask whether the node_list is empty. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-25-chris@chris-wilson.co.uk
2016-12-27drm: Detect overflow in drm_mm_reserve_node()Chris Wilson
Protect ourselves from a caller passing in node.start + node.size that will overflow and trick us into reserving that node. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-24-chris@chris-wilson.co.uk
2016-12-27drm: Fix kerneldoc for drm_mm_scan_remove_block()Chris Wilson
The nodes must be removed in the *reverse* order. This is correct in the overview, but backwards in the function description. Whilst here add Intel's copyright statement and tweak some formatting. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-23-chris@chris-wilson.co.uk
2016-12-27drm: Promote drm_mm alignment to u64Chris Wilson
In places (e.g. i915.ko), the alignment is exported to userspace as u64 and there now exists hardware for which we can indeed utilize a u64 alignment. As such, we need to keep 64bit integers throughout when handling alignment. Testcase: igt/drm_mm/align64 Testcase: igt/gem_exec_alignment Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-22-chris@chris-wilson.co.uk
2016-12-27drm: Compile time enabling for asserts in drm_mmChris Wilson
Use CONFIG_DRM_DEBUG_MM to conditionally enable the internal and validation checking using BUG_ON. Ideally these paths should all be exercised by CI selftests (with the asserts enabled). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-4-chris@chris-wilson.co.uk Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-4-chris@chris-wilson.co.uk
2016-12-27drm: Use drm_mm_nodes() as shorthand for the list of nodes under struct drm_mmChris Wilson
Fairly commonly we want to inspect the node list on the struct drm_mm, which is buried within an embedded node. Bring it to the surface with a bit of syntatic sugar. Note this was intended to be split from commit ad579002c8ec ("drm: Add drm_mm_for_each_node_safe()") before being applied, but my timing sucks. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-3-chris@chris-wilson.co.uk
2016-12-16drm: Constify the drm_mm APIChris Wilson
Mark up the pointers as constant through the API where appropriate. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161216074718.32500-5-chris@chris-wilson.co.uk
2016-12-16drm: Add drm_mm_for_each_node_safe()Chris Wilson
A complement to drm_mm_for_each_node(), wraps list_for_each_entry_safe() for walking the list of nodes safe against removal. Note from Joonas: "Most of the diff is about __drm_mm_nodes(mm), which could be split into own patch and keep the R-b's." But I don't feel like insisting on the resend. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> [danvet: Add note.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161216074718.32500-4-chris@chris-wilson.co.uk
2016-12-01drm: Initialise drm_mm.head_node.allocatedChris Wilson
commit 202b52b7fbf7 ("drm: Track drm_mm nodes with an interval tree") introduced a requirement that the special drm_mm.head_node was initialised and marked as not being allocated. It is a very special node that has no side but has a hole that represents the drm_mm address space, and holds the list of nodes. Since it is not a real node, it is not part of the node rbtree and we detect this as it being unallocated. This presumed that drm_mm_init() was initialising it to zero. It happens that i915 kzallocs its objects and so it was accidentally setting it, but for generic use we cannot make that assumption. [ 22.981519] general protection fault: 0000 [#1] SMP [ 22.981521] Modules linked in: test_drm_mm(+) ctr ccm arc4 rt2800usb rt2x00usb rt2800lib rt2x00lib crc_ccitt mac80211 cmac rfcomm bnep snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel dcdbas snd_hda_codec x86_pkg_temp_thermal intel_powerclamp btusb snd_hda_core coretemp crct10dif_pclmul cfg80211 btrtl btbcm btintel bluetooth crc32_pclmul ghash_clmulni_intel aesni_intel snd_pcm i2c_hid aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_timer hid_multitouch snd joydev serio_raw lpc_ich mfd_core i2c_designware_platform i2c_designware_core 8250_dw binfmt_misc soundcore acpi_pad nls_iso8859_1 usbhid hid psmouse ahci libahci [last unloaded: test_drm_mm] [ 22.981544] CPU: 1 PID: 2088 Comm: drm_mm Tainted: G W 4.9.0-rc7+ #234 [ 22.981545] Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A07 11/11/2015 [ 22.981546] task: ffff88020c971cc0 task.stack: ffffc90001728000 [ 22.981547] RIP: 0010:[<ffffffff814050f0>] [<ffffffff814050f0>] drm_mm_interval_tree_add_node+0xa0/0xd0 [ 22.981551] RSP: 0018:ffffc9000172ba98 EFLAGS: 00010202 [ 22.981552] RAX: 0f0000c69cf63d80 RBX: ffff88020be00000 RCX: ffff88020be00000 [ 22.981553] RDX: 0000000000000fff RSI: ffffc9000172bc48 RDI: ffffffff810ac4df [ 22.981553] RBP: ffffc9000172bb08 R08: ffffc9000172bc70 R09: 0000000000000fff [ 22.981554] R10: ffffffff810ac4d7 R11: 4dc04d8b4cffffe5 R12: 0000000000001000 [ 22.981555] R13: ffffc9000172bbd0 R14: ffffc9000172bbe0 R15: 0000000002000000 [ 22.981556] FS: 00007f80c9fab740(0000) GS:ffff88021f480000(0000) knlGS:0000000000000000 [ 22.981557] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.981558] CR2: 00007f80c9fd5000 CR3: 000000020c191000 CR4: 00000000003406e0 [ 22.981559] Stack: [ 22.981560] ffffffff81405d09 ffff88020be00000 ffffc9000172bbe0 000000000172bb08 [ 22.981562] ffffffffffffffff 0000000000000000 0000000000000000 0000000000000000 [ 22.981563] 0000000002000000 0000000002000000 ffffffffa02f3000 ffff88020be00000 [ 22.981565] Call Trace: [ 22.981568] [<ffffffff81405d09>] ? drm_mm_insert_node_generic+0x229/0x310 [ 22.981570] [<ffffffffa02f3000>] ? 0xffffffffa02f3000 [ 22.981572] [<ffffffffa02903c1>] __subtest_insert_range.constprop.7+0xd1/0x5b0 [test_drm_mm] [ 22.981575] [<ffffffff81081222>] ? default_wake_function+0x12/0x20 [ 22.981576] [<ffffffff81096905>] ? __wake_up_common+0x55/0x90 [ 22.981578] [<ffffffff81085f42>] ? sched_clock_cpu+0x72/0xa0 [ 22.981581] [<ffffffff811308ad>] ? irq_work_queue+0xd/0x80 [ 22.981582] [<ffffffff810abcc4>] ? wake_up_klogd+0x34/0x40 [ 22.981584] [<ffffffff810ac19d>] ? console_unlock+0x4cd/0x530 [ 22.981585] [<ffffffff810ac4d7>] ? vprintk_emit+0x2d7/0x490 [ 22.981587] [<ffffffff810ac82f>] ? vprintk_default+0x1f/0x30 [ 22.981589] [<ffffffff81146e1c>] ? printk+0x4d/0x4f [ 22.981590] [<ffffffffa02f3000>] ? 0xffffffffa02f3000 [ 22.981592] [<ffffffffa02908b5>] subtest_insert_range+0x15/0x80 [test_drm_mm] [ 22.981594] [<ffffffffa02f3088>] test_drm_mm_init+0x88/0x1000 [test_drm_mm] [ 22.981597] [<ffffffff8100043d>] do_one_initcall+0x3d/0x150 [ 22.981600] [<ffffffff8119dfbf>] ? kfree+0x13f/0x180 [ 22.981602] [<ffffffff811471f2>] do_init_module+0x60/0x1f1 [ 22.981606] [<ffffffff810db878>] load_module+0x2228/0x2790 [ 22.981608] [<ffffffff810d8590>] ? __symbol_put+0x40/0x40 [ 22.981612] [<ffffffff811c52b1>] ? kernel_read+0x41/0x60 [ 22.981614] [<ffffffff810dbfb6>] SYSC_finit_module+0x96/0xd0 [ 22.981617] [<ffffffff810dc00e>] SyS_finit_module+0xe/0x10 [ 22.981620] [<ffffffff816e7aa4>] entry_SYSCALL_64_fastpath+0x17/0x98 [ 22.981622] Code: c7 41 30 00 00 00 00 48 89 e5 48 89 3a 48 c7 c2 20 4e 40 81 e8 b2 a1 f0 ff 5d c3 48 8d 56 78 45 31 d2 48 89 d6 eb 25 48 8b 51 58 <48> 39 50 38 73 04 48 89 50 38 4c 8b 58 28 4c 39 59 48 48 8d 50 [ 22.981651] RIP [<ffffffff814050f0>] drm_mm_interval_tree_add_node+0xa0/0xd0 [ 22.981655] RSP <ffffc9000172ba98> Testcase: igt/drm_mm Fixes: 202b52b7fbf7 ("drm: Track drm_mm nodes with an interval tree") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161130205126.31106-1-chris@chris-wilson.co.uk
2016-11-24drm: Check against color expansion in drm_mm_reserve_node()Chris Wilson
Use the color_adjust callback when reserving a node to check if inserting a node into this hole requires any additional space, and so if that space then conflicts with an existing allocation. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161123141118.23876-2-chris@chris-wilson.co.uk
2016-11-24drm: Define drm_mm_for_each_node_in_range()Chris Wilson
Some clients would like to iterate over every node within a certain range. Make a nice little macro for them to hide the mixing of the rbtree search and linear walk. v2: Blurb Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161123141118.23876-1-chris@chris-wilson.co.uk
2016-11-08drm: Add stackdepot include for DRM_DEBUG_MMChris Wilson
0day found that stackdepot.h doesn't get automatically included on all architectures, so remember to add our #include. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 5705670d0463 ("drm: Track drm_mm allocators and show leaks on shutdown") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161108115601.22873-1-chris@chris-wilson.co.uk
2016-11-08drm: Track drm_mm allocators and show leaks on shutdownChris Wilson
We can use the kernel's stack tracer and depot to record the allocation site of every drm_mm user. Then on shutdown, as well as warning that allocated nodes still reside with the drm_mm range manager, we can display who allocated them to aide tracking down the leak. v2: Move Kconfig around so it lies underneath the DRM options submenu. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161031090806.20073-1-chris@chris-wilson.co.uk
2016-08-08drm: Declare that create drm_mm nodes with size 0 is illegalChris Wilson
At a higher level, all objects are created with definite size i.e. 0 is illegal. In forthcoming patches, this assumption is dependent upon in the drm_mm range manager, i.e. trying to create a drm_mm node with size 0 will have undefined behaviour. Add a couple of WARNs upon creating the drm_mm node to prevent later bugs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470248788-30873-1-git-send-email-chris@chris-wilson.co.uk
2016-08-08drm: Skip initialising the drm_mm_node->hole_stackChris Wilson
As we always add this to the drm_mm->hole_stack as our first operation, we do not need to initialise the list node. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470236651-678-3-git-send-email-chris@chris-wilson.co.uk
2016-08-08drm: Track drm_mm nodes with an interval treeChris Wilson
In addition to the last-in/first-out stack for accessing drm_mm nodes, we occasionally and in the future often want to find a drm_mm_node by an address. To do so efficiently we need to track the nodes in an interval tree - lookups for a particular address will then be O(lg(N)), where N is the number of nodes in the range manager as opposed to O(N). Insertion however gains an extra O(lg(N)) step for all nodes irrespective of whether the interval tree is in use. For future i915 patches, eliminating the linear walk is a significant improvement. v2: Use generic interval-tree template for u64 and faster insertion. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470236651-678-1-git-send-email-chris@chris-wilson.co.uk
2016-05-23drm/mm: avoid possible null pointer dereferenceHeinrich Schuchardt
Do not dereference node before the check if node is NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463602639-4861-1-git-send-email-xypron.glpk@gmx.de
2015-09-08drm/mm: Do DRM_MM_CREATE_TOP adj_start calculation after color_adjustMichel Thierry
The adj_start calculation for DRM_MM_CREATE_TOP should happen after mm->color_adjust. There was an inconsistency between drm_mm_insert_helper_range and drm_mm_insert_helper, as the later was already updating after color_adjust. Didn't spot it before, as color_adjust is only done in systems without LLC. But I'm not aware of anybody using this test case yet. Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-29drm: clean up drm_mm debugfs outputRussell King
The drm_mm debugfs output is difficult to read as two different formats are used for the addresses: 0x00000080000000-0x0000008000b000: 45056: used 0x8000b000-0x80016000: 45056: free 0x00000080016000-0x0000008001b000: 20480: used 0x8001b000-0x817a1000: 24666112: free 0x000000817a1000-0x000000817a8000: 28672: used 0x000000817a8000-0x00000081ba8000: 4194304: used Fix this by using %#018llx for all addresses, thus making the output: 0x0000000080000000-0x000000008000b000: 45056: used 0x000000008000b000-0x0000000080016000: 45056: free 0x0000000080016000-0x000000008001b000: 20480: used 0x000000008001b000-0x00000000817a1000: 24666112: free 0x00000000817a1000-0x00000000817a8000: 28672: used 0x00000000817a8000-0x0000000081ba8000: 4194304: used Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-16[PATCH] drm/mm: Fix support 4 GiB and larger rangesKrzysztof Kolasa
bad argument if(tmp)... in check_free_hole fix oops: kernel BUG at drivers/gpu/drm/drm_mm.c:305! [airlied: excellent, this was my task for today]. Signed-off-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>