summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_probe_helper.c
AgeCommit message (Collapse)Author
2024-03-04drm: Fix output poll work for drm_kms_helper_poll=nImre Deak
If drm_kms_helper_poll=n the output poll work will only get scheduled from drm_helper_probe_single_connector_modes() to handle a delayed hotplug event. Since polling is disabled the work in this case should just call drm_kms_helper_hotplug_event() w/o detecting the state of connectors and rescheduling the work. After commit d33a54e3991d after a delayed hotplug event above the connectors did get re-detected in the poll work and the work got re-scheduled periodically (since poll_running is also false if drm_kms_helper_poll=n), in effect ignoring the drm_kms_helper_poll=n kernel param. Fix the above by calling only drm_kms_helper_hotplug_event() for a delayed hotplug event if drm_kms_helper_hotplug_event=n, as was done before d33a54e3991d. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240301152243.1670573-1-imre.deak@intel.com
2023-08-23drm: Add an HPD poll helper to reschedule the poll workImre Deak
Add a helper to reschedule drm_mode_config::output_poll_work after polling has been enabled for a connector (and needing a reschedule, since previously polling was disabled for all connectors and hence output_poll_work was not running). This is needed by the next patch fixing HPD polling on i915. CC: stable@vger.kernel.org # 6.4+ Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230822113015.41224-1-imre.deak@intel.com (cherry picked from commit fe2352fd64029918174de4b460dfe6df0c6911cd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-02-27drm/probe-helper: Cancel previous job before starting new oneDom Cobley
Currently we schedule a call to output_poll_execute from drm_kms_helper_poll_enable for 10s in future. Later we try to replace that in drm_helper_probe_single_connector_modes with a 0s schedule with delayed_event set. But as there is already a job in the queue this fails, and the immediate job we wanted with delayed_event set doesn't occur until 10s later. And that call acts as if connector state has changed, reprobing modes. This has a side effect of waking up a display that has been blanked. Make sure we cancel the old job before submitting the immediate one. Fixes: 162b6a57ac50 ("drm/probe-helper: don't lose hotplug event") Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Dom Cobley <popcornmix@gmail.com> [Maxime: Switched to mod_delayed_work] Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
2023-01-26drm/probe_helper: sort out poll_running vs poll_enabledDmitry Baryshkov
There are two flags attemting to guard connector polling: poll_enabled and poll_running. While poll_enabled semantics is clearly defined and fully adhered (mark that drm_kms_helper_poll_init() was called and not finalized by the _fini() call), the poll_running flag doesn't have such clearliness. This flag is used only in drm_helper_probe_single_connector_modes() to guard calling of drm_kms_helper_poll_enable, it doesn't guard the drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling is actually running. Tie HPD enablement to this flag. This fixes the following warning reported after merging the HPD series: Hot plug detection already enabled WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm] Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6 Hardware name: NXP i.MX8MQ EVK (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_bridge_hpd_enable+0x94/0x9c [drm] lr : drm_bridge_hpd_enable+0x94/0x9c [drm] sp : ffff800009ef3740 x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000 x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000 x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0 x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006 x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260 x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000 x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744 x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011 x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000 Call trace: drm_bridge_hpd_enable+0x94/0x9c [drm] drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper] drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper] drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper] drm_client_modeset_probe+0x204/0x1190 [drm] __drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper] drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper] drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper] drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper] dcss_kms_attach+0x1c8/0x254 [imx_dcss] dcss_drv_platform_probe+0x90/0xfc [imx_dcss] platform_probe+0x70/0xcc really_probe+0xc4/0x2e0 __driver_probe_device+0x80/0xf0 driver_probe_device+0xe0/0x164 __device_attach_driver+0xc0/0x13c bus_for_each_drv+0x84/0xe0 __device_attach+0xa4/0x1a0 device_initial_probe+0x1c/0x30 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xd0 process_one_work+0x200/0x474 worker_thread+0x74/0x43c kthread+0xfc/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Reported-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Fixes: c8268795c9a9 ("drm/probe-helper: enable and disable HPD on connectors") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230124104548.3234554-2-dmitry.baryshkov@linaro.org
2023-01-26drm/probe_helper: extract two helper functionsDmitry Baryshkov
Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(), two helpers that enable and disable HPD handling on all device's connectors. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230124104548.3234554-1-dmitry.baryshkov@linaro.org
2023-01-23drm/edid: add separate drm_edid_connector_add_modes()Jani Nikula
The original goal with drm_edid_connector_update() was to have a single call for updating the connector and adding probed modes, in this order, but that turned out to be problematic. Drivers that need to update the connector in the .detect() callback would end up updating the probed modes as well. Turns out the callback may be called so many times that the probed mode list fills up without bounds, and this is amplified by add_alternate_cea_modes() duplicating the CEA modes on every call, actually running out of memory on some machines. Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me. Go back to having separate drm_edid_connector_update() and drm_edid_connector_add_modes() calls. The former may be called from .detect(), .force(), or .get_modes(), but the latter only from .get_modes(). Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update the probed modes from the EDID property instead of the passed in EDID. This is mainly to enforce two things: 1) drm_edid_connector_update() must be called before drm_edid_connector_add_modes(). Display info and quirks are needed for parsing the modes, and we don't want to call update_display_info() again to ensure the info is available, like drm_add_edid_modes() does. 2) The same EDID is used for both updating the connector and adding the probed modes. Fortunately, the change is easy, because no driver has actually adopted drm_edid_connector_update(). Not even i915, and that's mainly because of the problem described above. Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com
2023-01-05drm/probe-helper: enable and disable HPD on connectorsDmitry Baryshkov
Introduce two drm_connector_helper_funcs: enable_hpd() and disable_hpd(). They are called by drm_kms_helper_poll_enable() and drm_kms_helper_poll_disable() (and thus drm_kms_helper_poll_init() and drm_kms_helper_poll_fini()) respectively. This allows DRM drivers to rely on drm_kms_helper_poll for enabling and disabling HPD detection rather than doing that manually. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-3-dmitry.baryshkov@linaro.org
2023-01-05drm/poll-helper: merge drm_kms_helper_poll_disable() and _fini()Dmitry Baryshkov
Merge drm_kms_helper_poll_disable() and drm_kms_helper_poll_fini() code into a common helper function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-2-dmitry.baryshkov@linaro.org
2022-11-24drm/probe-helper: Provide a TV get_modes helperNoralf Trønnes
Most of the TV connectors will need a similar get_modes implementation that will, depending on the drivers' capabilities, register the 480i and 576i modes. That implementation will also need to set the preferred flag and order the modes based on the driver and users preferrence. This is especially important to guarantee that a userspace stack such as Xorg can start and pick up the preferred mode while maintaining a working output. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-12-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-05drm/fb-helper: Remove unnecessary include statementsThomas Zimmermann
Remove include statements for <drm/drm_fb_helper.h> where it is not required (i.e., most of them). In a few places include other header files that are required by the source code. v3: * fix amdgpu include statements * fix rockchip include statements Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de
2022-10-26drm/edid: rename drm_add_override_edid_modes() to ↵Jani Nikula
drm_edid_override_connector_update() Follow the naming of both EDID override functions as well as drm_edid_connector_update(). This also matches better what the function does; a combination of EDID property update and add modes. Indeed it should later be converted to call drm_edid_connector_update(). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba12957e0488654e8db010a3ff1534079caec972.1666614699.git.jani.nikula@intel.com
2022-09-12drm/probe-helper: Add drm_crtc_helper_mode_valid_fixed()Thomas Zimmermann
Add drm_crtc_helper_mode_valid_fixed(), which validates a given mode against a display hardware's mode. Convert simpledrm and use it in a few other drivers with static modes. v4: * remove empty line after opening brace v2: * rename 'static' and 'hw' to 'fixed' everywhere Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-3-tzimmermann@suse.de
2022-09-12drm/probe-helper: Add drm_connector_helper_get_modes_fixed()Thomas Zimmermann
Add drm_connector_helper_get_modes_fixed(), which duplicates a single display mode for a connector. Convert drivers. v2: * rename 'static' and 'hw' to 'fixed' everywhere * fix typo 'there' to 'their' (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-2-tzimmermann@suse.de
2022-06-30drm/probe-helper: add drm_connector_helper_get_modes()Jani Nikula
Add a helper function to be used as the "default" .get_modes() hook. This also works as an example of what the driver .get_modes() hooks are supposed to do regarding the new drm_edid_read*() and drm_edid_connector_update() calls. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d985449ed4b95971490ab7c09d2d59b58a892769.1656494768.git.jani.nikula@intel.com
2022-06-13drm/probe-helper: abstract .get_modes() connector helper callJani Nikula
Abstract the .get_modes() connector helper call, including the override/firmware EDID fallback, for clarity. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a4de51efc246e4f5bcbf7b84d66bb49aaf7fd974.1654674560.git.jani.nikula@intel.com
2022-06-06drm/probe-helper: Default to 640x480 if no EDID on DPDouglas Anderson
If we're unable to read the EDID for a display because it's corrupt / bogus / invalid then we'll add a set of standard modes for the display. Since we have no true information about the connected display, these modes are essentially guesses but better than nothing. At the moment, none of the modes returned is marked as preferred, but the modes are sorted such that the higher resolution modes are listed first. When userspace sees these modes presented by the kernel it needs to figure out which one to pick. At least one userspace, ChromeOS [1] seems to use the rules (which seem pretty reasonable): 1. Try to pick the first mode marked as preferred. 2. Try to pick the mode which matches the first detailed timing descriptor in the EDID. 3. If no modes were marked as preferred then pick the first mode. Unfortunately, userspace's rules combined with what the kernel is doing causes us to fail section 4.2.2.6 (EDID Corruption Detection) of the DP 1.4a Link CTS. That test case says that, while it's OK to allow some implementation-specific fall-back modes if the EDID is bad that userspace should _default_ to 640x480. Let's fix this by marking 640x480 as default for DP in the no-EDID case. NOTES: - In the discussion around v3 of this patch [2] there was talk about solving this in userspace and I even implemented a patch that would have solved this for ChromeOS, but then the discussion turned back to solving this in the kernel. - Also in the discussion of v3 [2] it was requested to limit this change to just DP since folks were worried that it would break some subtle corner case on VGA or HDMI. [1] https://source.chromium.org/chromium/chromium/src/+/a051f741d0a15caff2251301efe081c30e0f4a96:ui/ozone/platform/drm/common/drm_util.cc;l=488 [2] https://lore.kernel.org/r/20220513130533.v3.1.I31ec454f8d4ffce51a7708a8092f8a6f9c929092@changeid Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220601112302.v4.1.I31ec454f8d4ffce51a7708a8092f8a6f9c929092@changeid
2022-05-19drm/probe-helper: For DP, add 640x480 if all other modes are badDouglas Anderson
As per Displayport spec section 5.2.1.2 ("Video Timing Format") says that all detachable sinks shall support 640x480 @60Hz as a fail safe mode. A DP compliance test expected us to utilize the above fact when all modes it presented to the DP source were not achievable. It presented only modes that would be achievable with more lanes and/or higher speeds than we had available and expected that when we couldn't do that then we'd fall back to 640x480 even though it didn't advertise this size. In order to pass the compliance test (and also support any users who might fall into a similar situation with their display), we need to add 640x480 into the list of modes. However, we don't want to add 640x480 all the time. Despite the fact that the DP spec says all sinks _shall support_ 640x480, they're not guaranteed to support it _well_. Continuing to read the spec you can see that the display is not required to really treat 640x480 equal to all the other modes. It doesn't need to scale or anything--just display the pixels somehow for failsafe purposes. It should also be noted that it's not hard to find a display hooked up via DisplayPort that _doesn't_ support 640x480 at all. The HP ZR30w screen I'm sitting in front of has a native DP port and doesn't work at 640x480. I also plugged in a tiny 800x480 HDMI display via a DP to HDMI adapter and that screen definitely doesn't support 640x480. As a compromise solution, let's only add the 640x480 mode if: * We're on DP. * All other modes have been pruned. This acknowledges that 640x480 might not be the best mode to use but, since sinks are _supposed_ to support it, we will at least fall back to it if there's nothing else. Note that we _don't_ add higher resolution modes like 1024x768 in this case. We only add those modes for a failed EDID read where we have no idea what's going on. In the case where we've pruned all modes then instead we only want 640x480 which is the only defined "Fail Safe" resolution. This patch originated in response to Kuogee Hsieh's patch [1]. [1] https://lore.kernel.org/r/1650671124-14030-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511155749.v3.2.I4ac7f55aa446699f8c200a23c10463256f6f439f@changeid
2022-05-19drm/probe-helper: Add helper for drm_helper_probe_single_connector_modes()Douglas Anderson
The drm_helper_probe_single_connector_modes() is a bit long. Let's break a chunk off to update and validate modes. This helps avoid one goto and also will allow us to more easily call the helper a second time in a future patch without adding looping or another goto. This change is intended to be a no-op change--just code movement. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220511155749.v3.1.I2dd93486c6952bd52f2020904de0133970d11b29@changeid
2022-05-17drm/mgag200: Implement connector's get_modes with helperThomas Zimmermann
Provide drm_connector_helper_get_modes_from_ddc() to implement the connector's get_modes callback. The new helper updates the connector from DDC-provided EDID data. v2: * clear property if EDID is NULL in helper Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-4-tzimmermann@suse.de
2021-11-02drm/probe-helper: use drm_kms_helper_connector_hotplug_eventSimon Ser
If an hotplug event only updates a single connector, use drm_kms_helper_connector_hotplug_event instead of drm_kms_helper_hotplug_event. Changes in v4: - Simplify loop logic (Ville, Sam) - Update drm_connector_helper_hpd_irq_event (Maxime) Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-6-contact@emersion.fr
2021-11-02drm/probe-helper: add drm_kms_helper_connector_hotplug_eventSimon Ser
This function is the same as drm_kms_helper_hotplug_event, but takes a connector instead of a device. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-3-contact@emersion.fr
2021-09-28drm/probe-helper: Create a HPD IRQ event helper for a single connectorMaxime Ripard
The drm_helper_hpd_irq_event() function is iterating over all the connectors when an hotplug event is detected. During that iteration, it will call each connector detect function and figure out if its status changed. Finally, if any connector changed, it will notify the user-space and the clients that something changed on the DRM device. This is supposed to be used for drivers that don't have a hotplug interrupt for individual connectors. However, drivers that can use an interrupt for a single connector are left in the dust and can either reimplement the logic used during the iteration for each connector or use that helper and iterate over all connectors all the time. Since both are suboptimal, let's create a helper that will only perform the status detection on a single connector. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914101724.266570-2-maxime@cerno.tech
2021-09-28drm/probe-helper: Document drm_helper_hpd_irq_event() return valueMaxime Ripard
The documentation of the drm_helper_hpd_irq_event() function didn't document the value that function was returning. Add that part as well. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914101724.266570-1-maxime@cerno.tech
2021-08-02drm: Fix typo in commentsCai Huoqing
fix typo for drm v1->v2: respin with the change "iff ==> implies that" Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210730132729.376-1-caihuoqing@baidu.com
2021-03-16drm/probe-helper: Check epoch counter in output_poll_execute()Noralf Trønnes
drm_helper_hpd_irq_event() checks the epoch counter to determine connector status change. This was introduced in commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector"). Do the same for output_poll_execute() so it can detect other changes beside connection status value changes. v2: - Add Fixes tag (Daniel) Fixes: 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210313112545.37527-3-noralf@tronnes.org
2021-01-05drm: Add default modes for connectors in unknown stateLaurent Pinchart
The DRM CRTC helpers add default modes to connectors in the connected state if no mode can be retrieved from the connector. This behaviour is useful for VGA or DVI outputs that have no connected DDC bus. However, in such cases, the status of the output usually can't be retrieved and is reported as connector_status_unknown. Extend the addition of default modes to connectors in an unknown state to support outputs that can retrieve neither the modes nor the connection status. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-07-31Merge tag 'drm-intel-next-2020-07-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v5.9, batch #2 Highlights: - Very early DG1 enabling (Abdiel, Lucas, Anusha) Gem/GT: - Fix spinlock recursion on signaling a signaled request (Chris) - Perf: Use GTT when saving/restoring engine GPR (Umesh Nerlige Ramappa) - SSEU refactoring, debugfs move under gt/ (Daniele, Venkata Sandeep Dhanalakota) - Various GT refactoring and cleanup, preparation for future changes (Daniele) - Adjust HuC state accordingly after GuC fetch error (Michał Winiarski) - UC debugfs updates (Michał Winiarski) - Only revoke the GGTT mmappings on aperture detiling changes (Chris) - Only revoke mmap handlers if active (Chris) - Split the context's obj:vma lut into its own mutex (Chris) - Various memory, mmap and performance optimisations (Chris) - Improve system stability in case of false CS events (Chris) - Various refactorings and cleanup (Chris) - Always reset the engine on execlist failures (Chris) - Trace placement of timeline HWSP (Chris) - Update dma-attributes for our sg DMA (Chris) Display: - TGL CDCLK workaround tweaks to unbreak 8K display support (Stanislav) - A number of FBC fixes, along with i865 FBC enabling (Ville) - Validate MST modes against PBN limits (Lyude, Shawn Lee) - Do not access non-existing swizzle registers (Lucas) - Revert GEN11+ HBR3 rate fix that caused issues on TGL (Matt Atwood) - Update TGL+ combo phy initialization to match spec update (José) - Fix HDCP Content Protection property state machine (Anshuman) - Fix HDCP revoked keys handling (Ram) - Improve DDI BUF status checks and waits (Manasi) - Various SDVO+HDMI+DVI fixes around colorimetry, clocking, pixel repeat etc. (Ville) - DP voltage swing function refactoring (José) - WARN if max vswing/pre-emphasis violates the DP spec (Ville) Other: - Add new EHL PCI IDs (José) - Unify struct intel_digital_port variable naming (Lucas) - Various taint updates to aid debugging and improve CI (Michał Winiarski) - Straggler conversions to new mmio register accessors (Daniele) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87a70029vz.fsf@intel.com
2020-07-13drm/probe_helper: Add drm_connector_helper_funcs.mode_valid_ctxLyude Paul
This is just an atomic version of mode_valid, which is intended to be used for situations where a driver might need to check the atomic state of objects other than the connector itself. One such example is with MST, where the maximum possible bandwidth on a connector can change dynamically irregardless of the display configuration. Changes since v1: * Use new drm logging functions * Make some corrections in the mode_valid_ctx kdoc * Return error codes or 0 from ->mode_valid_ctx() on fail, and store the drm_mode_status in an additional function parameter Changes since v2: * Don't accidentally assign ret to mode->status on success, or we'll squash legitimate mode validation results * Don't forget to assign MODE_OK to status in drm_connector_mode_valid() if we have no callbacks * Drop leftover hunk in drm_modes.h around enum drm_mode_status Changes since v3: * s/return ret/return 0/ in drm_mode_validate_pipeline() * Minor cleanup in drm_connector_mode_valid() Tested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-2-lyude@redhat.com
2020-06-30drm: Introduce epoch counter to drm_connectorStanislav Lisovskiy
This counter will be used by drm_helper_probe_detect caller to determine if anything had changed(including edid, connection status and etc). Hardware specific driver detect hooks are responsible for updating this counter when some change is detected to notify the drm part, which can trigger for example hotplug event. Also now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v2: Added documentation for the new counter. Rename change_counter to epoch_counter. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540 Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-3-kunal1.joshi@intel.com
2020-06-23drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid()Laurent Pinchart
When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An example is the meson dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to perform clock calculations. Bridges that need the display info currently retrieve it from the drm_connector created by the bridge. This gets in the way of moving connector creation out of bridge drivers. To make this possible, pass the drm_display_info to drm_bridge_funcs .mode_valid(). Changes to the bridge drivers have been performed with the following coccinelle semantic patch and have been compile-tested. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .mode_valid = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; identifier mode; @@ enum drm_mode_status fn( struct drm_bridge *bridge, + const struct drm_display_info *info, const struct drm_display_mode *mode ) { ... } Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part: Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
2020-05-27drm: Nuke mode->vrefreshVille Syrjälä
Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
2020-05-17drm: Add DRM_MODE_TYPE_USERDEF flag to probed modes matching a video= argumentHans de Goede
drm_helper_probe_add_cmdline_mode() prefers using a probed mode matching a video= argument over calculating our own timings for the user specified mode using CVT or GTF. But userspace code which is auto-configuring the mode may want to know that the user has specified that mode on the kernel commandline so that it can pick that mode over the mode which is marked as DRM_MODE_TYPE_PREFERRED. This commit sets the DRM_MODE_TYPE_USERDEF flag on the matching mode, just as we would do on the user-specified mode when no matching probed mode is found. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221173313.510235-2-hdegoede@redhat.com
2019-12-09drm: Stop accessing encoder->bridge directlyBoris Brezillon
We are about to replace the single-linked bridge list by a double-linked one based on list.h, leading to the suppression of the encoder->bridge field. But before we can do that we must provide a drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers and core helpers to use it instead of directly accessing encoder->bridge. Note that we still have 2 drivers (VC4 and Exynos) manipulating the encoder->bridge field directly because they need to cut the bridge chain in order to control the enable/disable sequence. This is definitely not something we want to encourage, so let's keep those 2 oddities around until we find a better solution. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-4-boris.brezillon@collabora.com
2019-12-09drm/bridge: Rename bridge helpers targeting a bridge chainBoris Brezillon
Change the prefix of bridge helpers targeting a bridge chain from drm_bridge_ to drm_bridge_chain_ to better reflect the fact that the operation will happen on all elements of chain, starting at the bridge passed in argument. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-2-boris.brezillon@collabora.com
2019-09-16drm/connector: Allow max possible encoders to attach to a connectorJosé Roberto de Souza
Currently we restrict the number of encoders that can be linked to a connector to 3, increase it to match the maximum number of encoders that can be initialized(32). To more effiently do that lets switch from an array of encoder ids to bitmask. v2: Fixing missed return on amdgpu_dm_connector_to_encoder() Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190913232857.389834-2-jose.souza@intel.com
2019-08-28drm: Stop including drm_bridge.h from drm_crtc.hBoris Brezillon
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
2019-06-19Merge v5.2-rc5 into drm-nextDaniel Vetter
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-06-12drm: add fallback override/firmware EDID modes workaroundJani Nikula
We've moved the override and firmware EDID (simply "override EDID" from now on) handling to the low level drm_do_get_edid() function in order to transparently use the override throughout the stack. The idea is that you get the override EDID via the ->get_modes() hook. Unfortunately, there are scenarios where the DDC probe in drm_get_edid() called via ->get_modes() fails, although the preceding ->detect() succeeds. In the case reported by Paul Wise, the ->detect() hook, intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the case reported by Ilpo Järvinen, there is no ->detect() hook, which is interpreted as connected. The subsequent DDC probe reached via ->get_modes() fails, and we don't even look at the override EDID, resulting in no modes being added. Because drm_get_edid() is used via ->detect() all over the place, we can't trivially remove the DDC probe, as it leads to override EDID effectively meaning connector forcing. The goal is that connector forcing and override EDID remain orthogonal. Generally, the underlying problem here is the conflation of ->detect() and ->get_modes() via drm_get_edid(). The former should just detect, and the latter should just get the modes, typically via reading the EDID. As long as drm_get_edid() is used in ->detect(), it needs to retain the DDC probe. Or such users need to have a separate DDC probe step first. The EDID caching between ->detect() and ->get_modes() done by some drivers is a further complication that prevents us from making drm_do_get_edid() adapt to the two cases. Work around the regression by falling back to a separate attempt at getting the override EDID at drm_helper_probe_single_connector_modes() level. With a working DDC and override EDID, it'll never be called; the override EDID will come via ->get_modes(). There will still be a failing DDC probe attempt in the cases that require the fallback. v2: - Call drm_connector_update_edid_property (Paul) - Update commit message about EDID caching (Daniel) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583 Reported-by: Paul Wise <pabs3@bonedaddy.net> Cc: Paul Wise <pabs3@bonedaddy.net> References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fi Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: 15f080f08d48 ("drm/edid: respect connector force for drm_get_edid ddc probe") Fixes: 53fd40a90f3c ("drm: handle override and firmware EDID at drm_do_get_edid() level") Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2a39a drm/edid: abstract override/firmware EDID retrieval Cc: <stable@vger.kernel.org> # v4.15+ Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harish Chegondi <harish.chegondi@intel.com> Tested-by: Paul Wise <pabs3@bonedaddy.net> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com
2019-06-04drm: Flush output polling on shutdownChris Wilson
We need to mark the output polling as disabled to prevent concurrent irqs from queuing new work as shutdown the probe -- causing that work to execute after we have freed the structs: <4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) <4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915] <4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G U 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50 <4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48 <4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286 <4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000 <4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c <4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600 <4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0 <4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0 <4> [341.846613] FS: 00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000 <4> [341.846620] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0 <4> [341.846632] Call Trace: <4> [341.846639] drm_fb_helper_fini.part.17+0xb3/0x100 <4> [341.846682] intel_fbdev_fini+0x20/0x80 [i915] <4> [341.846722] intel_modeset_cleanup+0x9a/0x140 [i915] <4> [341.846750] i915_driver_unload+0xa3/0x100 [i915] <4> [341.846778] i915_pci_remove+0x19/0x30 [i915] <4> [341.846784] pci_device_remove+0x36/0xb0 <4> [341.846790] device_release_driver_internal+0xd3/0x1b0 <4> [341.846795] driver_detach+0x3f/0x80 <4> [341.846800] bus_remove_driver+0x53/0xd0 <4> [341.846805] pci_unregister_driver+0x25/0xa0 <4> [341.846843] i915_exit+0x16/0x1c [i915] <4> [341.846849] __se_sys_delete_module+0x162/0x210 <4> [341.846855] ? trace_hardirqs_off_thunk+0x1a/0x1c <4> [341.846859] ? do_syscall_64+0xd/0x1c0 <4> [341.846864] do_syscall_64+0x55/0x1c0 <4> [341.846869] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [341.846875] RIP: 0033:0x7f62b51871b7 <4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 <4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 <4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7 <4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948 <4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160 <4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000 <4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000 <4> [341.846936] irq event stamp: 3547847 <4> [341.846940] hardirqs last enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60 <4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50 <4> [341.846957] softirqs last enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9 <4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0 <4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846980] ---[ end trace ba94ca8952ba970e ]--- <7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes : <7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G U W 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.890655] Workqueue: events output_poll_execute <4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0 <4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8 <4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202 <4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000 <4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff <4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 <4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8 <4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007 <4> [341.890730] FS: 0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000 <4> [341.890739] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0 <4> [341.890752] Call Trace: <4> [341.890760] drm_fb_helper_hotplug_event.part.24+0x89/0xb0 <4> [341.890768] drm_kms_helper_hotplug_event+0x21/0x30 <4> [341.890774] output_poll_execute+0x9d/0x1a0 <4> [341.890782] process_one_work+0x245/0x610 <4> [341.890790] worker_thread+0x37/0x380 <4> [341.890796] ? process_one_work+0x610/0x610 <4> [341.890802] kthread+0x119/0x130 <4> [341.890808] ? kthread_park+0x80/0x80 <4> [341.890815] ret_from_fork+0x3a/0x50 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603135910.15979-2-chris@chris-wilson.co.uk
2019-05-27drm: drop use of drmP.h in drm/*Sam Ravnborg
The use of the drmP.h header file is deprecated. Remove use from all files in drm/* so people do not look there and follow a bad example. Build tested allyesconfig,allmodconfig on x86, arm etc. Including alpha that is as always more challenging than the rest. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from remaining connector functionsDaniel Vetter
Since there's very few callers of these I've decided to do them all in one patch. With this the unecessarily long drm_mode_connector_ prefix is gone from the codebase! The only exception being struct drm_mode_connector_set_property, which is part of the uapi so can't be renamed. Again done with sed+some manual fixups for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-10drm: Begin an API for in-kernel clientsNoralf Trønnes
This the beginning of an API for in-kernel clients. First out is a way to get a framebuffer backed by a dumb buffer. Only GEM drivers are supported. The original idea of using an exported dma-buf was dropped because it also creates an anonomous file descriptor which doesn't work when the buffer is created from a kernel thread. The easy way out is to use drm_driver.gem_prime_vmap to get the virtual address, which requires a GEM object. This excludes the vmwgfx driver which is the only non-GEM driver apart from the legacy ones. A solution for vmwgfx will have to be worked out later if it wants to support the client API which it probably will when we have a bootsplash client. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org
2018-07-05drm: Add drm_connector_for_each_possible_encoder()Ville Syrjälä
Add a convenience macro for iterating connector->encoder_ids[]. Isolates the users from the implementation details. Note that we don't seem to pass the file_priv down to drm_encoder_find() because encoders apparently don't get leased. No idea why drm_encoder_finc() even takes the file_priv actually. Also use ARRAY_SIZE() when populating the array to avoid spreading knowledge about the array size all over. v2: Hide the drm_encoder_find() in the macro, and rename the macro appropriately (Daniel) v3: Fix kernel docs (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628131315.14156-4-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-02-22Merge tag 'drm-misc-fixes-2018-02-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for 4.16. I contains fixes for deadlock on runtime suspend on few drivers, a memory leak on non-blocking commits, a crash on color-eviction. The is also meson and edid fixes, plus a fix for a doc warning. * tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc: drm/tve200: fix kernel-doc documentation comment include drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker workqueue: Allow retrieval of current task's work struct drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits
2018-02-16drm: Allow determining if current task is output poll workerLukas Wunner
Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de
2018-01-29drm/modes: Provide global mode_valid hookVille Syrjälä
Allow drivers to provide a device wide .mode_valid() hook in addition to the already existing crtc/encoder/bridge/connector hooks. This can be used to validate device/driver wide constraings without having to add those to the other hooks. And since we call this hook also for user modes later on in the modeset we don't have to worry about anything the hook has already rejected. I also have some further ideas for this hook. Eg. we could replace the drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc. with a driver specific variant via this hook. At least on i915 we would like to pass CRTC_STEREO_DOUBLE to that function instead, and then we could safely use the crtc_ timings in all our .mode_valid() hooks, which would allow us to reuse those hooks for validating the adjusted_mode during a modeset. v2: Fix the language fails in the kernel docs (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-30drm/probe-helper: Fix drm_kms_helper_poll_enable() docsNoralf Trønnes
Fix docs to reflect code and drm_kms_helper_poll_disable() docs by saying that calling drm_kms_helper_poll_enable() is fine even if output polling is not enabled. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-2-noralf@tronnes.org
generated by cgit (git 2.34.1) at 2024-06-08 13:39:19 +0000