summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/exynos/exynos_hdmi.c
AgeCommit message (Collapse)Author
2017-11-22drm/edid: Allow HDMI infoframe without VIC or S3DVille Syrjälä
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from 3D to 2D mode in a timely fashion if the source simply stops sending the HDMI infoframe. The suggested workaround is to keep sending the infoframe even when strictly not necessary (ie. no VIC and no S3D). HDMI 1.4 does allow for this behaviour, stating that sending the infoframe is optional in this case. The infoframe was first specified in HDMI 1.4, so in theory sinks predating that may not appreciate us sending an uknown infoframe their way. To avoid regressions let's try to determine if the sink supports the infoframe or not. Unfortunately there's no direct way to do that, so instead we'll just check if we managed to parse any HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the sink will accept the infoframe. Also if the EDID contains the HDMI 2.0 HDMI Forum VSDB we can assume the sink is prepared to receive the infoframe. v2: Fix getting has_hdmi_infoframe from display_info Always fail constructing the infoframe if the display possibly can't handle it Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com
2017-10-26drm: exynos: Add driver for HDMI audio interfaceSylwester Nawrocki
The hdmi-codec interface added in this patch is required to properly support HDMI audio. Currently the audio part of the SoC internal HDMI transmitter is configured with fixed values, which makes HDMI audio working by chance, only on boards having an external audio codec connected in parallel with the HDMI audio transmitter's input I2S interface. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-10-26drm/exynos/hdmi: add 85.5MHz pixel clock for v14 HDMI PHYDaniel Drake
Configuration details from Samsung. This enables 1366x768@60Hz, which also needs the 256px timing hack to work around a mixer limitation. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [a.hajda@samsung.com: rebased onto proposed patchset] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-10-26drm/exynos/hdmi: quirk for support mode timings conversionAndrzej Hajda
MIXER in SoCs prior to Exynos5420 supports only 4 video modes: 720x480, 720x576, 1280x720, 1920x1080. Support for other modes can be enabled by manipulating timings of HDMI. To do it adjusted_mode should contain actual mode set on crtc. With this patch it is possible to enable 1024x768 and 1280x1024 modes in MIXER. Suggested-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-10-26drm/exynos/hdmi: remove redundant mode fieldAndrzej Hajda
Display mode is preserved in CRTC state, there is no need to keep local copy of it. Moreover since HDMI should configure registers according to requested mode, use it instead of adjusted_mode, which should contain mode produced by CRTC - functionally it does not change anything, but subsequent patches will make the difference. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-09-20drm/exynos/hdmi: Fix unsafe list iterationMaciej Purski
Function hdmi_mode_fixup() used bare list_for_each entry, which was unsafe and caused memory corruption detected by kasan. It now uses drm_for_each_connector_iter macro, which is now recommended by the documentation and safe. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-25drm/exynos: use helper to set possible crtcsAndrzej Hajda
All encoders share the same code to set encoders possible_crtcs field. The patch creates helper to abstract out this code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-15Backmerge tag 'v4.13-rc5' into drm-nextDave Airlie
Linux 4.13-rc5 There's a really nasty nouveau collision, hopefully someone can take a look once I pushed this out.
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-07-27drm: exynos: mark pm functions as __maybe_unusedArnd Bergmann
The rework of the exynos DRM clock handling introduced warnings for configurations that have CONFIG_PM disabled: drivers/gpu/drm/exynos/exynos_hdmi.c:736:13: error: 'hdmi_clk_disable_gates' defined but not used [-Werror=unused-function] static void hdmi_clk_disable_gates(struct hdmi_context *hdata) ^~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/exynos/exynos_hdmi.c:717:12: error: 'hdmi_clk_enable_gates' defined but not used [-Werror=unused-function] static int hdmi_clk_enable_gates(struct hdmi_context *hdata) The problem is that the PM functions themselves are inside of an #ifdef, but some functions they call are not. This patch removes the #ifdef and instead marks the PM functions as __maybe_unused, which is a more reliable way to get it right. Link: https://patchwork.kernel.org/patch/8436281/ Fixes: 9be7e9898444 ("drm/exynos/hdmi: clock code re-factoring") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm/exynos/hdmi: fix disable sequenceAndrzej Hajda
The "Fixes" patch was incorrectly merged, as a result PHY is prematurely powered off and for example Odroid-U3 cannot disable TV power domain when HDMI cable is unplugged. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 625e63e2 ("drm/exynos/hdmi: fix pipeline disable order") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-27drm: exynos: hdmi: make of_device_ids const.Arvind Yadav
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 12294 1192 0 13486 34ae drivers/gpu/drm/exynos/exynos_hdmi.o File size after constify hdmi_match_types. text data bss dec hex filename 13318 176 0 13494 34b6 drivers/gpu/drm/exynos/exynos_hdmi.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-07-14drm: handle HDMI 2.0 VICs in AVI info-framesShashank Sharma
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-06-01drm/exynos/hdmi: fix pipeline disable orderAndrzej Hajda
Hardware require that MIXER(crtc) should be disabled prior to HDMI(encoder). It was achieved by disabling crtc from encoder disable callback, bypassing drm core. As a result drm core tried to call vblank related routines on disabled crtc. The patch fixes it by simplifying hdmi_disable routine - now it only cancels hotplug worker. Hardware will be disabled in proper moment during pipe clock disable. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-05-05Merge tag 'media/v4.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates for v4.12-rc1: - new driver to support mediatek jpeg in hardware codec - rc-lirc, s5p-cec and st-cec staging drivers got promoted - hardware histogram support for vsp1 driver - added Virtual Media Controller driver, to make easier to test the media controller - added a new CEC driver (rainshadow-cec) - removed two staging LIRC drivers for obscure hardware that are too obsolete - added support for Intel SR300 Depth camera - some improvements at CEC and RC core - lots of driver cleanups, improvements all over the tree With this series, we're finally getting rid of the LIRC staging driver. There's just one left (lirc_zilog), with require more care, as part of its functionality (IR RX) is already provided by another driver. Work in progress to convert it on the proper way" * tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits) [media] ov2640: print error if devm_*_optional*() fails [media] atmel-isc: Fix the static checker warning [media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8 [media] ov2640: fix vflip control [media] ov2640: fix duplicate width+height returning from ov2640_select_win() [media] ov2640: add missing write to size change preamble [media] ov2640: add information about DSP register 0xc7 [media] ov2640: improve banding filter register definitions/documentation [media] ov2640: fix init sequence alignment [media] ov2640: make GPIOLIB an optional dependency [media] xc5000: fix spelling mistake: "calibration" [media] vidioc-queryctrl.rst: fix menu/int menu references [media] media-entity: only call dev_dbg_obj if mdev is not NULL [media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-' [media] mtk-vcodec: avoid warnings because of empty macros [media] coda: bump maximum number of internal framebuffers to 17 [media] media: mtk-vcodec: remove informative log [media] subdev-formats.rst: remove spurious '-' [media] dw2102: limit messages to buffer size [media] ttusb2: limit messages to buffer size ...
2017-04-10[media] exynos_hdmi: add CEC notifier supportHans Verkuil
Implement the CEC notifier support to allow CEC drivers to be informed when there is a new physical address. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-11Merge branch 'drm/next/platform' of git://linuxtv.org/pinchartl/media into ↵Daniel Vetter
drm-misc-next Merge Laurent's drm_platform removal code. Only conflict is with the drm_pci.h extraction, which allows me to fix up the misplayed drm_platform_init fumble that 0day and Stephen Rothwell reported. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-26Merge airlied/drm-next into drm-misc-nextDaniel Vetter
Backmerge the main pull request to sync up with all the newly landed drivers. Otherwise we'll have chaos even before 4.12 started in earnest. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-17drm: exynos: Perform initialization/cleanup at probe/remove timeLaurent Pinchart
The drm driver .load() operation is prone to race conditions as it initializes the driver after registering the device nodes. Its usage is deprecated, inline it in the probe function and call drm_dev_alloc() and drm_dev_register() explicitly. For consistency inline the .unload() handler in the remove function as well. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Acked-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm: exynos: use vblank hooks in struct drm_crtc_funcsShawn Guo
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. As the result, exynos_drm_crtc_enable[disable]_vblank() become static functions. They are moved around a bit to save forward declaration though. Also while at it, we move one step further to kill exynos_drm_crtc_from_pipe() completely by updating hdmi_bind() a bit. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Inki Dae <inki.dae@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-9-git-send-email-shawnguo@kernel.org
2017-02-07drm/exynos/hdmi: add bridge supportAndrzej Hajda
On TM2/TM2e platforms HDMI output is connected to MHL bridge SiI8620. To allow configure UltraHD modes on the bridge and to eliminate unsupported modes this bridge should be attached to drm_encoder implemented in exynos_hdmi. Changelog v1: - fix drm_attach_bridge argument. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm/exynos/hdmi: fix PLL for 27MHz settingsAndrzej Hajda
Current settings for 27MHz and 27.027MHz do not work. Use the settings from vendor code instead. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm/exynos/hdmi: fix VSI infoframe registersAndrzej Hajda
VSI infoframe registers address space is non-contiguous, so infoframe write should be split into two chunks. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm/exynos/hdmi: add 297MHz pixel clock supportAndrzej Hajda
297MHz is used by Ultra HD modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-12-05drm/exynos/hdmi: refactor infoframe codeAndrzej Hajda
Use core helpers to generate infoframes and generate vendor frame if necessary. Changelog: - changed 'ret >= 0' checks to '!ret' Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-11-25gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomapArvind Yadav
Free memory mapping, if hdmi_probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-10-01gpu: drm: exynos_hdmi: Remove duplicate initialization of regulator bulk ↵Milo Kim
consumer The helper, devm_regulator_bulk_get() initializes the consumer as NULL, so this code can be ignored. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01gpu: drm: exynos_hdmi: Move PHY logic into single functionMilo Kim
Paring DT properties and getting PHY IO (memory mapped or I2C) in one function. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-10-01gpu: drm: exynos_hdmi: Move DDC logic into single functionMilo Kim
Paring DT properties and getting the I2C adapter in one function. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-07-15gpu: drm: exynos_hdmi: add missing of_node_put after calling of_parse_phandlePeter Chen
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-06-10drm: exynos: Rely on the default ->best_encoder() behaviorBoris Brezillon
We have 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() implementations and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-5-git-send-email-boris.brezillon@free-electrons.com
2016-05-17drm/exynos/hdmi: add a missing tabDan Carpenter
Smatch warns that the if statement isn't indented. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160512195457.GA19095@mwanda
2016-05-10drm/exynos/hdmi: Don't print error on deferral due to regulatorsJavier Martinez Canillas
The regulators may not be available just because their driver's probe function was just not executed and so the regulators not registered. So, in this case the Exynos HDMI driver should not print logs since a -EPROBE_DEFER is not really an error and that will just pollute the kernel log and confuse users. This patch prevents the following misleading messages to be printed: [ 1.443638] [drm:hdmi_probe] *ERROR* failed to get regulators [ 1.449326] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-05-10drm/exynos/hdmi: expose HDMI-PHY clock as pipeline clockAndrzej Hajda
HDMI-PHY clock should be accessible from other components in the pipeline. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos: hdmi: use generic of_device_get_match_data helperMarek Szyprowski
Simplify code by replacing custom code by generic helper. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: remove registry dumpAndrzej Hajda
HDMI registry dump unnecessary spoils console and is not very helpful. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add core reset codeAndrzej Hajda
To ensure HDMI-PHY reprogramming will not affect HDMI the latter should be reset. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add PHY power off signal handlingAndrzej Hajda
HDMI-PHY power off bit defaults to 0 in older HDMI versions. In case of Exynos5433 it defaults to 1. To make code consistent across all versions this bit is always unset/set in power on/off sequences. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: fix PHY configuration sequenceAndrzej Hajda
Proper PHY configuration should be as follow: 1. set HDMI clock parents to OSCCLK. 2. reconfigure PHY. 3. set HDMI clock parents to PHY. 4. wait for PLL stabilization. The patch fixes it and consolidates the code. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: add Exynos5433 supportAndrzej Hajda
HDMI on Exynos5433 differs from previous versions: - different HDMI-PHY settings, - different clocks, - SYSREG registers for enabling reference clock, - MODE_SET register in HDMI-PHY. It is distinguished from other variants by different compatible string. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: stop programming registers with default valuesAndrzej Hajda
There is no point in rewriting default values, as the IP is reset anyway. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: code cleanupAndrzej Hajda
The patch performs following clean-ups: - remove unnecessary white spaces, - remove obvious comments, - fix tabulations, - remove NULL initializators, - re-order driver data. The patch does not change driver's behavior. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: use array specifier for HDMI-PHY configurationsAndrzej Hajda
HDMI-PHY configurations are stored as array pointer and count pair, we can re-use existing helpers to simplify their initialization. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: constify global variablesAndrzej Hajda
These variables should not be modified. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-04-30drm/exynos/hdmi: clock code re-factoringAndrzej Hajda
With incoming support for newer SoCs different set of clocks will be required, depending on IP version. The patch prepares the driver for it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-01drm/exynos/hdmi: remove unused variableAndrzej Hajda
The variable is unused for long time. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-15drm/exynos: Constify function pointer structsVille Syrjälä
Moves a bunch of junk to .rodata from .data. drivers/gpu/drm/exynos/exynosdrm.ko: -.text 125792 +.text 125788 -.rodata 10972 +.rodata 11748 -.data 6720 +.data 5944 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-19-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-15Merge branch 'exynos-drm-next' of ↵Dave Airlie
git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next - Support runtime pm . In case of most ARM SoC, each IP has each power domain which should be controlled by each IP driver using runtime pm interface. So this patch series makes each IP driver to control its own power domain when drm dpms is requested. - Support of_graph based dt binding for DP panel. . This patch series adds of_graph based dt binding for DP panel. And also it keeps backward compatibility. This includes dt binding patch so I got Acked-by from Krzysztof Kozlowski who is a Exynos SoC maintainer and from Rob Herring who is a device tree maintainer. - Cleanup for Exynos DRM IPP enhancement. . This patch series is a first step for enhancing existing IPP framework which will integrate existing IPP functions with DRM KMS part so that these can be transparent to userspace. For other portion of the patch series, we will have more times for the review.] * 'exynos-drm-next' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos: (29 commits) drm/exynos: gem: remove old unused prototypes drm/exynos: fimd: fix dma burst size setting for small plane size drm/exynos: fix clipping when scaling is enabled drm/exynos: mixer: use ratio precalculated in exynos_state drm/exynos: add generic check for plane state drm/exynos: introduce exynos_drm_plane_config structure drm/exynos: mixer: enable video overlay plane only when VP is available drm/exynos: mixer: use crtc->state->adjusted_mode instead of crtc->mode drm/exynos: introduce exynos_drm_plane_state structure drm/exynos: move dma_addr attribute from exynos plane to exynos fb drm/exynos: exynos7-decon: remove excessive check drm/exynos: rotator: convert to common clock framework drm/exynos: gsc: add device tree support and remove usage of static mappings drm/exynos: gsc: fix wrong pm_runtime state drm/exynos: gsc: prepare and unprepare gsc clock ARM: dts: Use OF graph for DP to panel connection in exynos5800-peach-pi dt-bindings: exynos-dp: update ports node binding for panel drm/exynos: dp: add of_graph dt binding support for panel drm/exynos: decon: remove unused variables drm/exynos: dsi: modify a error type when getting a node failed ...
2015-12-13drm/exynos: add pm_runtime to HDMIGustavo Padovan
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v3: - revive powered flag to keep current dpms mode Changelog v2: - Mofidy CONFIG_PM_SLEEP -> CONFIG_PM Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-11drm: Pass 'name' to drm_encoder_init()Ville Syrjälä
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4; @@ drm_encoder_init(E1, E2, E3, E4 + ,NULL ) v2: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
generated by cgit (git 2.34.1) at 2025-04-02 22:53:15 +0000