summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/gt/intel_gt_pm.c
AgeCommit message (Collapse)Author
2023-11-20drm/i915: Track gt pm wakerefsAndrzej Hajda
Track every intel_gt_pm_get() until its corresponding release in intel_gt_pm_put() by returning a cookie to the caller for acquire that must be passed by on released. When there is an imbalance, we can see who either tried to free a stale wakeref, or who forgot to free theirs. v2: track recently added calls in gen8_ggtt_bind_get_ce and destroyed_worker_func Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030-ref_tracker_i915-v1-2-006fe6b96421@intel.com
2023-11-16drm/i915/gt: add missing new-line to GT_TRACEAndrzej Hajda
Trace requires new-line at the end of message (in opposition to printk), otherwise trace dump becomes messy. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115-eols-v1-1-d47a2f52b807@intel.com
2023-09-30drm/i915: Toggle binder context ready statusNirmoy Das
Toggle binder context ready status when needed. To issue gpu commands, the driver must be primed to receive requests. Maintain binder-based GGTT update disablement until driver probing completes. Moreover, implement a temporary disablement of blitter prior to entering suspend, followed by re-enablement post-resume. This is acceptable as those transition periods are mostly single threaded. v2: move changes to lower levels from i915_driver.c(Jani). use new function for setting context ready status. Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Oak Zeng <oak.zeng@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926083742.14740-7-nirmoy.das@intel.com
2023-09-29drm/i915: Clean steer semaphore on resumeNirmoy Das
During resume, the steer semaphore on GT1 was observed to be held. The hardware team has confirmed the safety of clearing steer semaphores for all GTs during driver load/resume, as no lock acquisitions can occur in this process by other agents. v2: reset on resume not in intel_gt_init(). v3: do the reset on intel_gt_resume_early() v4: do general sanitization for all GTs(Matt) Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230928130015.6758-3-nirmoy.das@intel.com
2023-09-29drm/i915: Introduce the intel_gt_resume_early()Nirmoy Das
Move early resume functions of gt to a proper file. Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230928130015.6758-2-nirmoy.das@intel.com
2023-06-10drm/i915: use pointer to i915 instead of rpm in wakerefLuca Coelho
Currently a pointer to an intel_runtime_pm structure is stored in the wake reference structures so the runtime data can be accessed. We can save the entire device information (drm_i915_private) instead, since we'll need to reference the new workqueue we'll add in subsequent patches. Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ec0eb5149120d04f3d9870d7671ef10103e6fc29.1686231190.git.jani.nikula@intel.com
2023-05-22drm/i915/pmu: Transform PMU parking code to be GT basedTvrtko Ursulin
Trivial prep work for full multi-tile enablement later. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-5-umesh.nerlige.ramappa@intel.com
2023-03-22Merge tag 'drm-intel-gt-next-2023-03-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Fix issue #6333: "list_add corruption" and full system lockup from performance monitoring (Janusz) - Give the punit time to settle before fatally failing (Aravind, Chris) - Don't use stolen memory or BAR for ring buffers on LLC platforms (John) - Add missing ecodes and correct timeline seqno on GuC error captures (John) - Make sure DSM size has correct 1MiB granularity on Gen12+ (Nirmoy, Lucas) - Fix potential SSEU max_subslices array-index-out-of-bounds access on Gen11 (Andrea) - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+ (Matt R.) - Apply Wa_1408615072/Wa_1407596294 correctly on Gen11 (Matt R) - Apply LNCF/LBCF workarounds correctly on XeHP SDV/PVC/DG2 (Matt R) - Implement Wa_1606376872 for Xe_LP (Gustavo) - Consider GSI offset when doing MCR lookups on Meteorlake+ (Matt R.) - Add engine TLB invalidation for Meteorlake (Matt R.) - Fix GSC Driver-FLR completion on Meteorlake (Alan) - Fix GSC races on driver load/unload on Meteorlake+ (Daniele) - Disable MC6 for MTL A step (Badal) - Consolidate TLB invalidation flow (Tvrtko) - Improve debug GuC/HuC debug messages (Michal Wa., John) - Move fd_install after last use of fence (Rob) - Initialize the obj flags for shmem objects (Aravind) - Fix missing debug object activation (Nirmoy) - Probe lmem before the stolen portion (Matt A) - Improve clean up of GuC busyness stats worker (John) - Fix missing return code checks in GuC submission init (John) - Annotate two more workaround/tuning registers as MCR on PVC (Matt R) - Fix GEN8_MISCCPCTL definition and remove unused INF_UNIT_LEVEL_CLKGATE (Lucas) - Use sysfs_emit() and sysfs_emit_at() (Nirmoy) - Make kobj_type structures constant (Thomas W.) - make kobj attributes const on gt/ (Jani) - Remove the unused virtualized start hack on buddy allocator (Matt A) - Remove redundant check for DG1 (Lucas) - Move DG2 tuning to the right function (Lucas) - Rename dev_priv to i915 for private data naming consistency in gt/ (Andi) - Remove unnecessary whitelisting of CS_CTX_TIMESTAMP on Xe_HP platforms (Matt R.) - - Escape wildcard in method names in kerneldoc (Bagas) - Selftest improvements (Chris, Jonathan, Tvrtko, Anshuman, Tejas) - Fix sparse warnings (Jani) [airlied: fix unused variable in intel_workarounds] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZBMSb42yjjzczRhj@jlahtine-mobl.ger.corp.intel.com
2023-03-13drm/i915/mtl: Disable MC6 for MTL A stepBadal Nilawar
The Wa_14017073508 require to send Media Busy/Idle mailbox while accessing Media tile. As of now it is getting handled while __gt_unpark, __gt_park. But there are various corner cases where forcewakes are taken without __gt_unpark i.e. without sending Busy Mailbox especially during register reads. Forcewakes are taken without busy mailbox leads to GPU HANG. So bringing mailbox calls under forcewake calls are no feasible option as forcewake calls are atomic and mailbox calls are blocking. The issue already fixed in B step so disabling MC6 on A step and reverting previous commit which handles Wa_14017073508 Fixes: 8f70f1ec587d ("drm/i915/mtl: Add Wa_14017073508 for SAMedia") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310061339.2495416-2-badal.nilawar@intel.com
2023-03-06drm/i915: remove unnecessary intel_pm.h includesJani Nikula
As intel_pm.[ch] used to contain much more, intel_pm.h was included in a lot of places. Many of them are now unnecessary. Remove. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ab9a7147b0cd63d95b9f27ed40615b9c9be18f84.1677678803.git.jani.nikula@intel.com
2023-01-17drm/i915/gt: Start adding module oriented dmesg outputJohn Harrison
When trying to analyse bug reports from CI, customers, etc. it can be difficult to work out exactly what is happening on which GT in a multi-GT system. So add GT oriented debug/error message wrappers. If used instead of the drm_ equivalents, you get the same output but with a GT# prefix on it. v2: Go back to using lower case names (combined review feedback). Convert intel_gt.c as a first step. v3: Add gt_err_ratelimited() as well, undo one conversation that might not have a GT pointer in some scenarios (review feedback from Michal W). Split definitions into separate header (review feedback from Jani). Convert all intel_gt*.c files. v4: Re-order some macro definitions (Andi S), update (c) date (Tvrtko) Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111200429.2139084-2-John.C.Harrison@Intel.com
2022-12-30Merge drm/drm-next into drm-intel-gt-nextRodrigo Vivi
Sync after v6.2-rc1 landed in drm-next. We need to get some dependencies in place before we can merge the fixes series from Gwan-gyeong and Chris. References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/ Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-09drm/i915/pxp: Promote pxp subsystem to top-level of i915Alan Previn
Starting with MTL, there will be two GT-tiles, a render and media tile. PXP as a service for supporting workloads with protected contexts and protected buffers can be subscribed by process workloads on any tile. However, depending on the platform, only one of the tiles is used for control events pertaining to PXP operation (such as creating the arbitration session and session tear-down). PXP as a global feature is accessible via batch buffer instructions on any engine/tile and the coherency across tiles is handled implicitly by the HW. In fact, for the foreseeable future, we are expecting this single-control-tile for the PXP subsystem. In MTL, it's the standalone media tile (not the root tile) because it contains the VDBOX and KCR engine (among the assets PXP relies on for those events). Looking at the current code design, each tile is represented by the intel_gt structure while the intel_pxp structure currently hangs off the intel_gt structure. Keeping the intel_pxp structure within the intel_gt structure makes some internal functionalities more straight forward but adds code complexity to code readability and maintainibility to many external-to-pxp subsystems which may need to pick the correct intel_gt structure. An example of this would be the intel_pxp_is_active or intel_pxp_is_enabled functionality which should be viewed as a global level inquiry, not a per-gt inquiry. That said, this series promotes the intel_pxp structure into the drm_i915_private structure making it a top-level subsystem and the PXP subsystem will select the control gt internally and keep a pointer to it for internal reference. This promotion comes with two noteworthy changes: 1. Exported pxp functions that are called by external subsystems (such as intel_pxp_enabled/active) will have to check implicitly if i915->pxp is valid as that structure will not be allocated for HW that doesn't support PXP. 2. Since GT is now considered a soft-dependency of PXP we are ensuring that GT init happens before PXP init and vice versa for fini. This causes a minor ordering change whereby we previously called intel_pxp_suspend after intel_uc_suspend but now is before i915_gem_suspend_late but the change is required for correct dependency flows. Additionally, this re-order change doesn't have any impact because at that point in either case, the top level entry to i915 won't observe any PXP events (since the GPU was quiesced during suspend_prepare). Also, any PXP event doesn't really matter when we disable the PXP HW (global GT irqs are already off anyway, so even if there was a bug that generated spurious events we wouldn't see it and we would just clean it up on resume which is okay since the default fallback action for PXP would be to keep the sessions off at this suspend stage). Changes from prior revs: v11: - Reformat a comment (Tvrtko). v10: - Change the code flow for intel_pxp_init to make it more cleaner and readible with better comments explaining the difference between full-PXP-feature vs the partial-teelink inits depending on the platform. Additionally, only do the pxp allocation when we are certain the subsystem is needed. (Tvrtko). v9: - Cosmetic cleanups in supported/enabled/active. (Daniele). - Add comments for intel_pxp_init and pxp_get_ctrl_gt that explain the functional flow for when PXP is not supported but the backend-assets are needed for HuC authentication (Daniele and Tvrtko). - Fix two remaining functions that are accessible outside PXP that need to be checking pxp ptrs before using them: intel_pxp_irq_handler and intel_pxp_huc_load_and_auth (Tvrtko and Daniele). - User helper macro in pxp-debugfs (Tvrtko). v8: - Remove pxp_to_gt macro (Daniele). - Fix a bug in pxp_get_ctrl_gt for the case of MTL and we don't support GSC-FW on it. (Daniele). - Leave i915->pxp as NULL if we dont support PXP and in line with that, do additional validity check on i915->pxp for intel_pxp_is_supported/enabled/active (Daniele). - Remove unncessary include header from intel_gt_debugfs.c and check drm_minor i915->drm.primary (Daniele). - Other cosmetics / minor issues / more comments on suspend flow order change (Daniele). v7: - Drop i915_dev_to_pxp and in intel_pxp_init use 'i915->pxp' through out instead of local variable newpxp. (Rodrigo) - In the case intel_pxp_fini is called during driver unload but after i915 loading failed without pxp being allocated, check i915->pxp before referencing it. (Alan) v6: - Remove HAS_PXP macro and replace it with intel_pxp_is_supported because : [1] introduction of 'ctrl_gt' means we correct this for MTL's upcoming series now. [2] Also, this has little impact globally as its only used by PXP-internal callers at the moment. - Change intel_pxp_init/fini to take in i915 as its input to avoid ptr-to-ptr in init/fini calls.(Jani). - Remove the backpointer from pxp->i915 since we can use pxp->ctrl_gt->i915 if we need it. (Rodrigo). v5: - Switch from series to single patch (Rodrigo). - change function name from pxp_get_kcr_owner_gt to pxp_get_ctrl_gt. - Fix CI BAT failure by removing redundant call to intel_pxp_fini from driver-remove. - NOTE: remaining open still persists on using ptr-to-ptr and back-ptr. v4: - Instead of maintaining intel_pxp as an intel_gt structure member and creating a number of convoluted helpers that takes in i915 as input and redirects to the correct intel_gt or takes any intel_gt and internally replaces with the correct intel_gt, promote it to be a top-level i915 structure. v3: - Rename gt level helper functions to "intel_pxp_is_enabled/ supported/ active_on_gt" (Daniele) - Upgrade _gt_supports_pxp to replace what was intel_gtpxp_is supported as the new intel_pxp_is_supported_on_gt to check for PXP feature support vs the tee support for huc authentication. Fix pxp-debugfs-registration to use only the former to decide support. (Daniele) - Couple minor optimizations. v2: - Avoid introduction of new device info or gt variables and use existing checks / macros to differentiate the correct GT->PXP control ownership (Daniele Ceraolo Spurio) - Don't reuse the updated global-checkers for per-GT callers (such as other files within PXP) to avoid unnecessary GT-reparsing, expose a replacement helper like the prior ones. (Daniele). v1: - Add one more patch to the series for the intel_pxp suspend/resume for similar refactoring References: https://patchwork.freedesktop.org/patch/msgid/20221202011407.4068371-1-alan.previn.teres.alexis@intel.com Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221208180542.998148-1-alan.previn.teres.alexis@intel.com
2022-11-23Merge tag 'drm-intel-next-2022-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT Changes: - gvt-next stuff mostly with refactor for the new MDEV interface. i915 Changes: - PSR fixes and improvements (Jouni) - DP DSC fixes (Vinod, Jouni) - More general display cleanups (Jani) - More display collor management cleanup targetting degamma (Ville) - remove circ_buf.h includes (Jiri) - wait power off delay at driver remove to optimize probe (Jani) - More audio cleanup targeting the ELD precompute readout (Ville) - Enable DC power states on all eDP ports (Imre) - RPL-P stepping info (Matt Atwood) - MTL enabling patches (RK) - Removal of DG2 force_probe (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
2022-11-14drm/i915/mtl: Add Wa_14017073508 for SAMediaBadal Nilawar
This workaround is added for Media tile of MTL A step. It is to help pcode workaround which handles the hardware issue seen during package C2/C3 transitions due to RC6 entry/exit transitions on Media tile. As a part of workaround pcode expect kmd to send mailbox message "media busy" when components of Media tile are in use and "media idle" otherwise. As per workaround description gucrc need to be disabled so enabled host based RC for Media tile. v2: - Correct workaround id (Matt) - Fix review comments (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103184559.2306481-1-badal.nilawar@intel.com
2022-11-11drm/i915: stop including i915_irq.h from i915_trace.hJani Nikula
Turns out many of the files that need i915_reg.h get it implicitly via {display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h -> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h, makes sense to drop it, but that requires adding quite a few new includes all over the place. Prefer including i915_reg.h where needed instead of adding another implicit include, because eventually we'll want to split up i915_reg.h and only include the specific registers at each place. Also some places actually needed i915_irq.h too. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
2022-04-21Merge drm/drm-next into drm-intel-gt-nextRodrigo Vivi
In order to get the GSC Support merged on drm-intel-gt-next in a clean fashion we needed this ATS-M patch to avoid conflict in i915_pci.c: commit 412c942bdfae ("drm/i915/ats-m: add ATS-M platform info") -- Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c: - if (!intel_vtd_active(i915)) + if (!i915_vtd_active(i915)) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-04-19drm/i915/guc: Enable Wa_22011802037 for gen12 GuC based platformsUmesh Nerlige Ramappa
Initiating a reset when the command streamer is not idle or in the middle of executing an MI_FORCE_WAKE can result in a hang. Multiple command streamers can be part of a single reset domain, so resetting one would mean resetting all command streamers in that domain. To workaround this, before initiating a reset, ensure that all command streamers within that reset domain are either IDLE or are not executing a MI_FORCE_WAKE. Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when initiating engine-resets. For gt-resets, ensure that i915 applies the WA sequence. Opens to address in future patches: - The part of the WA to wait for pending forcewakes is also applicable to execlists backend. - The WA also needs to be applied for gen11 Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-3-umesh.nerlige.ramappa@intel.com
2022-03-21drm/i915: Prepare for multiple GTsTvrtko Ursulin
On a multi-tile platform, each tile has its own registers + GGTT space, and BAR 0 is extended to cover all of them. Up to four GTs are supported in i915->gt[], with slot zero shadowing the existing i915->gt0 to enable source compatibility with legacy driver paths. A for_each_gt macro is added to iterate over the GTs and will be used by upcoming patches that convert various parts of the driver to be multi-gt aware. Only the primary/root tile is initialized for now; the other tiles will be detected and plugged in by future patches once the necessary infrastructure is in place to handle them. Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318233938.149744-4-andi.shyti@linux.intel.com
2022-03-02drm/i915: Use str_yes_no()Lucas De Marchi
Remove the local yesno() implementation and adopt the str_yes_no() from linux/string_helpers.h. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
2021-11-23drm/i915/gt: Hold RPM wakelock during PXP suspendTejas Upadhyay
selftest --r live shows failure in suspend tests when RPM wakelock is not acquired during suspend. This changes addresses below error : <4> [154.177535] RPM wakelock ref not held during HW access <4> [154.177575] WARNING: CPU: 4 PID: 5772 at drivers/gpu/drm/i915/intel_runtime_pm.h:113 fwtable_write32+0x240/0x320 [i915] <4> [154.177974] Modules linked in: i915(+) vgem drm_shmem_helper fuse snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp mei_pxp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec snd_hwdep igc snd_hda_core ttm mei_me ptp snd_pcm prime_numbers mei i2c_i801 pps_core i2c_smbus intel_lpss_pci btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915] <4> [154.178143] CPU: 4 PID: 5772 Comm: i915_selftest Tainted: G U 5.15.0-rc6-CI-Patchwork_21432+ #1 <4> [154.178154] Hardware name: ASUS System Product Name/TUF GAMING Z590-PLUS WIFI, BIOS 0811 04/06/2021 <4> [154.178160] RIP: 0010:fwtable_write32+0x240/0x320 [i915] <4> [154.178604] Code: 15 7b e1 0f 0b e9 34 fe ff ff 80 3d a9 89 31 00 00 0f 85 31 fe ff ff 48 c7 c7 88 9e 4f a0 c6 05 95 89 31 00 01 e8 c0 15 7b e1 <0f> 0b e9 17 fe ff ff 8b 05 0f 83 58 e2 85 c0 0f 85 8d 00 00 00 48 <4> [154.178614] RSP: 0018:ffffc900016279f0 EFLAGS: 00010286 <4> [154.178626] RAX: 0000000000000000 RBX: ffff888204fe0ee0 RCX: 0000000000000001 <4> [154.178634] RDX: 0000000080000001 RSI: ffffffff823142b5 RDI: 00000000ffffffff <4> [154.178641] RBP: 00000000000320f0 R08: 0000000000000000 R09: c0000000ffffcd5a <4> [154.178647] R10: 00000000000f8c90 R11: ffffc90001627808 R12: 0000000000000000 <4> [154.178654] R13: 0000000040000000 R14: ffffffffa04d12e0 R15: 0000000000000000 <4> [154.178660] FS: 00007f7390aa4c00(0000) GS:ffff88844f000000(0000) knlGS:0000000000000000 <4> [154.178669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [154.178675] CR2: 000055bc40595028 CR3: 0000000204474005 CR4: 0000000000770ee0 <4> [154.178682] PKRU: 55555554 <4> [154.178687] Call Trace: <4> [154.178706] intel_pxp_fini_hw+0x23/0x30 [i915] <4> [154.179284] intel_pxp_suspend+0x1f/0x30 [i915] <4> [154.179807] live_gt_resume+0x5b/0x90 [i915] Changes since V2 : - Remove boolean in intel_pxp_runtime_preapre for non-pxp configs. Solves build error Changes since V2 : - Open-code intel_pxp_runtime_suspend - Daniele - Remove boolean in intel_pxp_runtime_preapre - Daniele Changes since V1 : - split the HW access parts in gt_suspend_late - Daniele - Remove default PXP configs Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Fixes: 0cfab4cb3c4e ("drm/i915/pxp: Enable PXP power management") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211117060321.3729343-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2021-10-28drm/i915/pmu: Connect engine busyness stats from GuC to pmuUmesh Nerlige Ramappa
With GuC handling scheduling, i915 is not aware of the time that a context is scheduled in and out of the engine. Since i915 pmu relies on this info to provide engine busyness to the user, GuC shares this info with i915 for all engines using shared memory. For each engine, this info contains: - total busyness: total time that the context was running (total) - id: id of the running context (id) - start timestamp: timestamp when the context started running (start) At the time (now) of sampling the engine busyness, if the id is valid (!= ~0), and start is non-zero, then the context is considered to be active and the engine busyness is calculated using the below equation engine busyness = total + (now - start) All times are obtained from the gt clock base. For inactive contexts, engine busyness is just equal to the total. The start and total values provided by GuC are 32 bits and wrap around in a few minutes. Since perf pmu provides busyness as 64 bit monotonically increasing values, there is a need for this implementation to account for overflows and extend the time to 64 bits before returning busyness to the user. In order to do that, a worker runs periodically at frequency = 1/8th the time it takes for the timestamp to wrap. As an example, that would be once in 27 seconds for a gt clock frequency of 19.2 MHz. Note: There might be an over-accounting of busyness due to the fact that GuC may be updating the total and start values while kmd is reading them. (i.e kmd may read the updated total and the stale start). In such a case, user may see higher busyness value followed by smaller ones which would eventually catch up to the higher value. v2: (Tvrtko) - Include details in commit message - Move intel engine busyness function into execlist code - Use union inside engine->stats - Use natural type for ping delay jiffies - Drop active_work condition checks - Use for_each_engine if iterating all engines - Drop seq locking, use spinlock at GuC level to update engine stats - Document worker specific details v3: (Tvrtko/Umesh) - Demarcate GuC and execlist stat objects with comments - Document known over-accounting issue in commit - Provide a consistent view of GuC state - Add hooks to gt park/unpark for GuC busyness - Stop/start worker in gt park/unpark path - Drop inline - Move spinlock and worker inits to GuC initialization - Drop helpers that are called only once v4: (Tvrtko/Matt/Umesh) - Drop addressed opens from commit message - Get runtime pm in ping, remove from the park path - Use cancel_delayed_work_sync in disable_submission path - Update stats during reset prepare - Skip ping if reset in progress - Explicitly name execlists and GuC stats objects - Since disable_submission is called from many places, move resetting stats to intel_guc_submission_reset_prepare v5: (Tvrtko) - Add a trylock helper that does not sleep and synchronize PMU event callbacks and worker with gt reset v6: (CI BAT failures) - DUTs using execlist submission failed to boot since __gt_unpark is called during i915 load. This ends up calling the GuC busyness unpark hook and results in kick-starting an uninitialized worker. Let park/unpark hooks check if GuC submission has been initialized. - drop cant_sleep() from trylock helper since rcu_read_lock takes care of that. v7: (CI) Fix igt@i915_selftest@live@gt_engines - For GuC mode of submission the engine busyness is derived from gt time domain. Use gt time elapsed as reference in the selftest. - Increase busyness calculation to 10ms duration to ensure batch runs longer and falls within the busyness tolerances in selftest. v8: - Use ktime_get in selftest as before - intel_reset_trylock_no_wait results in a lockdep splat that is not trivial to fix since the PMU callback runs in irq context and the reset paths are tightly knit into the driver. The test that uncovers this is igt@perf_pmu@faulting-read. Drop intel_reset_trylock_no_wait, instead use the reset_count to synchronize with gt reset during pmu callback. For the ping, continue to use intel_reset_trylock since ping is not run in irq context. - GuC PM timestamp does not tick when GuC is idle. This can potentially result in wrong busyness values when a context is active on the engine, but GuC is idle. Use the RING TIMESTAMP as GPU timestamp to process the GuC busyness stats. This works since both GuC timestamp and RING timestamp are synced with the same clock. - The busyness stats may get updated after the batch starts running. This delay causes the busyness reported for 100us duration to fall below 95% in the selftest. The only option at this time is to wait for GuC busyness to change from idle to active before we sample busyness over a 100us period. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027004821.66097-2-umesh.nerlige.ramappa@intel.com
2021-10-04drm/i915/pxp: Enable PXP power managementHuang, Sean Z
During the power event S3+ sleep/resume, hardware will lose all the encryption keys for every hardware session, even though the session state might still be marked as alive after resume. Therefore, we should consider the session as dead on suspend and invalidate all the objects. The session will be automatically restarted on the first protected submission on resume. v2: runtime suspend also invalidates the keys v3: fix return codes, simplify rpm ops (Chris), use the new worker func v4: invalidate the objects on suspend, don't re-create the arb sesson on resume (delayed to first submission). v5: move irq changes back to irq patch (Rodrigo) v6: drop invalidation in runtime suspend (Rodrigo) Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-13-alan.previn.teres.alexis@intel.com
2021-09-24drm/i915 Implement LMEM backup and restore for suspend / resumeThomas Hellström
Just evict unpinned objects to system. For pinned LMEM objects, make a backup system object and blit the contents to that. Backup is performed in three steps, 1: Opportunistically evict evictable objects using the gpu blitter. 2: After gt idle, evict evictable objects using the gpu blitter. This will be modified in an upcoming patch to backup pinned objects that are not used by the blitter itself. 3: Backup remaining pinned objects using memcpy. Also move uC suspend to after 2) to make sure we have a functional GuC during 2) if using GuC submission. v2: - Major refactor to make sure gem_exec_suspend@hang-SX subtests work, and suspend / resume works with a slightly modified GuC submission enabling patch series. v3: - Fix a potential use-after-free (Matthew Auld) - Use i915_gem_object_create_shmem() instead of i915_gem_object_create_region (Matthew Auld) - Minor simplifications (Matthew Auld) - Fix up kerneldoc for i195_ttm_restore_region(). - Final lmem_suspend() call moved to i915_gem_backup_suspend from i915_gem_suspend_late, since the latter gets called at driver unload and we don't unnecessarily want to run it at that time. v4: - Interface change of ttm- & lmem suspend / resume functions to use flags rather than bools. (Matthew Auld) - Completely drop the i915_gem_backup_suspend change (Matthew Auld) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-5-thomas.hellstrom@linux.intel.com
2021-09-24drm/i915/gt: Increase suspend timeoutThomas Hellström
With GuC submission on DG1, the execution of the requests times out for the gem_exec_suspend igt test case after executing around 800-900 of 1000 submitted requests. Given the time we allow elsewhere for fences to signal (in the order of seconds), increase the timeout before we mark the gt wedged and proceed. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210922062527.865433-4-thomas.hellstrom@linux.intel.com
2021-07-28drm/i915: Remove i915_globalsDaniel Vetter
No longer used. Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-10-daniel.vetter@ffwll.ch
2021-07-27drm/i915/guc: Reset implementation for new GuC interfaceMatthew Brost
Reset implementation for new GuC interface. This is the legacy reset implementation which is called when the i915 owns the engine hang check. Future patches will offload the engine hang check to GuC but we will continue to maintain this legacy path as a fallback and this code path is also required if the GuC dies. With the new GuC interface it is not possible to reset individual engines - it is only possible to reset the GPU entirely. This patch forces an entire chip reset if any engine hangs. v2: (Michal) - Check for -EPIPE rather than -EIO (CT deadlock/corrupt check) v3: (John H) - Split into a series of smaller patches v4: (John H) - Fix typo - Add braces around if statements in reset code v5: (Checkpatch) - Fix warnings Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <john.c.harrison@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com
2021-07-22drm/i915: Ditch i915 globals shrink infrastructureDaniel Vetter
This essentially reverts commit 84a1074920523430f9dc30ff907f4801b4820072 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jan 24 11:36:08 2018 +0000 drm/i915: Shrink the GEM kmem_caches upon idling mm/vmscan.c:do_shrink_slab() is a thing, if there's an issue with it then we need to fix that there, not hand-roll our own slab shrinking code in i915. Also when this was added there was only one other caller of kmem_cache_shrink (added 2005 to the acpi code). Now there's a 2nd one outside of i915 code in a kunit test, which seems legit since that wants to very carefully control what's in the kmem_cache. This out of a total of over 500 calls to kmem_cache_create. This alone should have been warning sign enough that we're doing something silly. Noticed while reviewing a patch set from Jason to fix up some issues in our i915_init() and i915_exit() module load/cleanup code. Now that i915_globals.c isn't any different than normal init/exit functions, we should convert them over to one unified table and remove i915_globals.[hc] entirely. v2: Improve commit message (Jason) Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Cc: David Airlie <airlied@linux.ie> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210721183229.4136488-1-daniel.vetter@ffwll.ch
2021-03-24drm/i915/gt: SPDX cleanupChris Wilson
Clean up the SPDX licence declarations to comply with checkpatch. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122192913.4518-1-chris@chris-wilson.co.uk Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-12-17drm/i915/gt: Track the overall awake/busy timeChris Wilson
Since we wake the GT up before executing a request, and go to sleep as soon as it is retired, the GT wake time not only represents how long the device is powered up, but also provides a summary, albeit an overestimate, of the device runtime (i.e. the rc0 time to compare against rc6 time). v2: s/busy/awake/ v3: software-gt-awake-time and I915_PMU_SOFTWARE_GT_AWAKE_TIME Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154456.13954-1-chris@chris-wilson.co.uk
2020-07-06drm/i915: Reboot CI if we get wedged during driver initMichał Winiarski
Getting wedged device on driver init is pretty much unrecoverable. Since we're running various scenarios that may potentially hit this in CI (module reload / selftests / hotunplug), and if it happens, it means that we can't trust any subsequent CI results, we should just apply the taint to let the CI know that it should reboot (CI checks taint between test runs). v2: Comment that WEDGED_ON_INIT is non-recoverable, distinguish WEDGED_ON_INIT from WEDGED_ON_FINI (Chris) v3: Appease checkpatch, fixup search-replace logic expression mindbomb in assert (Chris) Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Petri Latvala <petri.latvala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-1-michal@hardline.pl
2020-06-03drm/i915/gt: Suppress the error message for GT init failure on error injectionChris Wilson
If we injected an error (such as pretending the GuC firmware was broken), then suppress the error message as it is expected and our CI complains if it sees any *ERROR*. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200603104657.25651-1-chris@chris-wilson.co.uk
2020-05-13drm/i915/gt: Suspend tasklets before resume sanitizationChris Wilson
It is possible for a residual tasklet to be pending execution as we resume (whether that's some prior test kicking off the tasklet, or if we are in a suspend/resume stress test). As such, we do not want that tasklet to execute in the middle of our sanitization, such that it sees the poisoned state. For example, <4>[ 449.386553] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 449.386555] CPU: 1 PID: 5115 Comm: i915_selftest Tainted: G U W 5.7.0-rc4-CI-CI_DRM_8472+ #1 <4>[ 449.386556] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4>[ 449.386585] RIP: 0010:process_csb+0x6bf/0x830 [i915] <4>[ 449.386588] Code: 00 48 c7 c2 10 bc 4c a0 48 c7 c7 d4 75 34 a0 e8 87 0e e6 e0 bf 01 00 00 00 e8 9d e0 e5 e0 31 f6 bf 09 00 00 00 e8 e1 ba d6 e0 <0f> 0b 8b 87 10 05 00 00 85 c0 0f 85 5f f9 ff ff 48 c7 c1 70 a5 4f <4>[ 449.386591] RSP: 0018:ffffc90000170ea0 EFLAGS: 00010297 <4>[ 449.386594] RAX: 0000000080000101 RBX: 0000000000000000 RCX: 0000000000000000 <4>[ 449.386596] RDX: ffff88849d5bc040 RSI: 0000000000000000 RDI: 0000000000000009 <4>[ 449.386598] RBP: ffffc90000170f00 R08: 0000000000000000 R09: 0000000000000000 <4>[ 449.386600] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88843ccea018 <4>[ 449.386602] R13: ffff88843ccea658 R14: ffff88843ccea640 R15: ffff88843ccea000 <4>[ 449.386605] FS: 00007f826a813300(0000) GS:ffff88849fe80000(0000) knlGS:0000000000000000 <4>[ 449.386607] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 449.386609] CR2: 0000560366b94280 CR3: 000000048ba02002 CR4: 0000000000760ee0 <4>[ 449.386611] PKRU: 55555554 <4>[ 449.386613] Call Trace: <4>[ 449.386616] <IRQ> <4>[ 449.386646] ? execlists_submission_tasklet+0xcf/0x140 [i915] <4>[ 449.386674] execlists_submission_tasklet+0x2f/0x140 [i915] <4>[ 449.386679] tasklet_action_common.isra.16+0x6c/0x1c0 <4>[ 449.386684] __do_softirq+0xdf/0x49e <4>[ 449.386687] irq_exit+0xba/0xc0 <4>[ 449.386690] smp_apic_timer_interrupt+0xb7/0x280 <4>[ 449.386693] apic_timer_interrupt+0xf/0x20 <4>[ 449.386695] </IRQ> <4>[ 449.386698] RIP: 0010:_raw_spin_unlock_irqrestore+0x49/0x60 <4>[ 449.386701] Code: c7 02 75 1f 53 9d e8 26 ab 75 ff bf 01 00 00 00 e8 7c a3 69 ff 65 8b 05 7d 9b 5c 7e 85 c0 74 0c 5b 5d c3 e8 09 aa 75 ff 53 9d <eb> df e8 ca 39 5b ff 5b 5d c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 <4>[ 449.386703] RSP: 0018:ffffc90000a6b950 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 <4>[ 449.386706] RAX: 0000000080000001 RBX: 0000000000000202 RCX: 0000000000000000 <4>[ 449.386708] RDX: ffff88849d5bc040 RSI: ffff88849d5bc900 RDI: ffffffff82386f12 <4>[ 449.386710] RBP: ffff88847d400f00 R08: ffff88849d5bc900 R09: 0000000000000000 <4>[ 449.386712] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffff0b0b <4>[ 449.386714] R13: 000000000000000c R14: ffff88847d40bf70 R15: ffff88847d40cef8 <4>[ 449.386742] reset_csb_pointers+0x59/0x140 [i915] <4>[ 449.386769] execlists_sanitize+0x3e/0x60 [i915] <4>[ 449.386797] gt_sanitize+0xd6/0x260 [i915] As part of the reset preparation, engine->reset.prepare() prevents the tasklet from running, so pull the sanitization inside the critical section for reset. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1812 Fixes: 23122a4d992b ("drm/i915/gt: Scrub execlists state on resume") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513122826.27484-1-chris@chris-wilson.co.uk
2020-05-03drm/i915/gt: Sanitize RPS interrupts upon resumeChris Wilson
Currently we clear and disable the RPS pm interrupts on module load, and presume that they remain disabled forevermore. However, the mask is cleared on suspend and so after resume they may start showing up again unexepectedly. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1811 Fixes: 8e99299a04bc ("drm/i915/gt: Track use of RPS interrupts in flags") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi@etezian.org> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200502173512.32353-1-chris@chris-wilson.co.uk
2020-04-27drm/i915/gt: Sanitize GT firstChris Wilson
We see that if the HW doesn't actually sleep, the HW may eat the poison we set in its write-only HWSP during sanitize: intel_gt_resume.part.8: 0000:00:02.0 __gt_unpark: 0000:00:02.0 gt_sanitize: 0000:00:02.0 force:yes process_csb: 0000:00:02.0 vcs0: cs-irq head=5, tail=90 process_csb: 0000:00:02.0 vcs0: csb[0]: status=0x5a5a5a5a:0x5a5a5a5a assert_pending_valid: Nothing pending for promotion! The CS TAIL pointer should have been reset by reset_csb_pointers(), so in this case it is likely that we have read back from the CPU cache and so we must clflush our control over that page. In doing so, push the sanitisation to the start of the GT sequence so that our poisoning is assuredly before we start talking to the HW. References: https://gitlab.freedesktop.org/drm/intel/-/issues/1794 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200427084000.10999-1-chris@chris-wilson.co.uk
2020-04-24drm/i915/gt: Use the RPM config register to determine clk frequenciesChris Wilson
For many configuration details within RC6 and RPS we are programming intervals for the internal clocks. From gen11, these clocks are configuration via the RPM_CONFIG and so for convenience, we would like to convert to/from more natural units (ns). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424162805.25920-2-chris@chris-wilson.co.uk
2020-04-17drm/i915/gt: Scrub execlists state on resumeChris Wilson
Before we resume, we reset the HW so we restart from a known good state. However, as a part of the reset process, we drain our pending CS event queue -- and if we are resuming that does not correspond to internal state. On setup, we are scrubbing the CS pointers, but alas only on setup. Apply the sanitization not just to setup, but to all resumes. Reported-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200416114117.3460-1-chris@chris-wilson.co.uk
2020-04-08drm/i915/gt: prefer struct drm_device based loggingJani Nikula
Prefer struct drm_device based logging over struct device based logging. No functional changes. Cc: Wambui Karuga <wambui.karugax@gmail.com> Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200402114819.17232-16-jani.nikula@intel.com
2020-03-16drm/i915/gt: Pull restoration of GGTT fences underneath the GTChris Wilson
Make the GT responsible for restoring its fence when it wakes up from suspend. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-2-chris@chris-wilson.co.uk
2020-01-31drm/i915: extract engine WA programming to common resume functionDaniele Ceraolo Spurio
The workarounds are a common "feature" across gens and submission mechanisms and we already call the other WA related functions from common engine ones (<setup/cleanup>_common), so it makes sense to do the same with WA application. Medium-term, This will help us reduce the duplication once the GuC resume function is added, but short term it will also allow us to use the workaround lists for pre-gen8 engine workarounds. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200131075716.2212299-2-chris@chris-wilson.co.uk
2020-01-03drm/i915/gt: Discard stale context state from across idlingChris Wilson
Before we idle, on parking, we switch to the kernel context such that we have a scratch context loaded while the GPU idle, protecting any precious user state. Be paranoid and assume that the idle state may have been trashed, and reset the kernel_context image after idling. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102131707.1463945-4-chris@chris-wilson.co.uk
2019-12-30drm/i915/gt: Avoid using the GPU before initialisationChris Wilson
Mark the GT as wedged so that we are not tempted to use it prior to initialisation. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191229183153.3719869-3-chris@chris-wilson.co.uk
2019-12-26drm/i915/gt: Apply sanitiization just before resumeChris Wilson
Bring sanitization completely underneath the umbrella of intel_gt, and perform it exclusively after suspend and before the next resume. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191226111834.2545953-1-chris@chris-wilson.co.uk
2019-12-22drm/i915/gt: Pull intel_gt_init_hw() into intel_gt_resume()Chris Wilson
Since intel_gt_resume() is always immediately proceeded by init_hw, pull the call into intel_gt_resume, where we have the rpm and fw already held. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191222144046.1674865-1-chris@chris-wilson.co.uk
2019-12-22drm/i915/gt: Pull GT initialisation under intel_gt_init()Chris Wilson
Begin pulling the GT setup underneath a single GT umbrella; let intel_gt take ownership of its engines! As hinted, the complication is the lifetime of the probed engine versus the active lifetime of the GT backends. We need to detect the engine layout early and keep it until the end so that we can sanitize state on takeover and release. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Acked-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191222120752.1368352-1-chris@chris-wilson.co.uk
2019-12-18drm/i915/gt: Ratelimit display power w/aChris Wilson
For very light workloads that frequently park, acquiring the display power well (required to prevent the dmc from trashing the system) takes longer than the execution. A good example is the igt_coherency selftest, which is slowed down by an order of magnitude in the worst case with powerwell cycling. To prevent frequent cycling, while keeping our fast soft-rc6, use a timer to delay release of the display powerwell. Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles") References: https://gitlab.freedesktop.org/drm/intel/issues/848 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218093504.3477048-1-chris@chris-wilson.co.uk
2019-12-13drm/i915: Introduce new macros for tracingVenkata Sandeep Dhanalakota
New macros ENGINE_TRACE(), CE_TRACE(), RQ_TRACE() and GT_TRACE() are introduce to tag device name and engine name with contexts and requests tracing in i915. Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191213155152.69182-2-venkata.s.dhanalakota@intel.com
2019-12-02drm/i915/gt: Use soft-rc6 for w/a protectionChris Wilson
Now that we have soft-rc6 in place, we can use that instead of the forcewake to disable rc6 while active; preferred by a few microbenchmarks. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191202110836.2342685-1-chris@chris-wilson.co.uk
2019-11-27drm/i915/gt: Manual rc6 entry upon parkingChris Wilson
Now that we rapidly park the GT when the GPU idles, we often find ourselves idling faster than the RC6 promotion timer. Thus if we tell the GPU to enter RC6 manually as we park, we can do so quicker (by around 50ms, half an EI on average) and marginally increase our powersaving across all execlists platforms. v2: Now with a selftest to check we can enter RC6 manually Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Acked-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191127095657.3209854-1-chris@chris-wilson.co.uk
2019-11-20drm/i915/gt: Fixup config ifdeffery for pm_suspend_target_stateChris Wilson
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is both declared and defined. Reported-by: kbuild-all@lists.01.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: a70a9e998e8e ("drm/i915: Defer rc6 shutdown to suspend_late") Cc: Andi Shyti <andi.shyti@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191120182209.3967833-1-chris@chris-wilson.co.uk
generated by cgit (git 2.34.1) at 2024-05-03 02:20:33 +0000