summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/i915_params.c
AgeCommit message (Collapse)Author
2017-12-19drm/i915: Add pretty printer for modparamsMichal Wajdeczko
We dump modparams in few places (debugfs, gpu_error) using different functions. Lets add reusable function to avoid code duplication. add/remove: 1/0 grow/shrink: 0/2 up/down: 1096/-2339 (-1243) Function old new delta i915_params_dump - 1096 +1096 i915_capabilities 1353 185 -1168 i915_error_state_to_str 5507 4336 -1171 Total: Before=1285716, After=1284473, chg -0.10% v2: use forward decl rather than include (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-3-michal.wajdeczko@intel.com
2017-12-06drm/i915/guc: Combine enable_guc_loading|submission modparamsMichal Wajdeczko
We currently have two module parameters that control GuC: "enable_guc_loading" and "enable_guc_submission". Whenever we need submission=1, we also need loading=1. We also need loading=1 when we want to want to load and verify the HuC. Lets combine above module parameters into one "enable_guc" modparam. New supported bit values are: 0=disable GuC (no GuC submission, no HuC) 1=enable GuC submission 2=enable HuC load Special value "-1" can be used to let driver decide what option should be enabled for given platform based on hardware/firmware availability or preference. Explicit enabling any of the GuC features makes GuC load a required step, fallback to non-GuC mode will not be supported. v2: Don't use -EIO v3: define modparam bits (Chris) v4: rely on implicit cast (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-6-michal.wajdeczko@intel.com
2017-12-01drm/i915: Remove unsafe i915.enable_rc6Chris Wilson
It has been many years since the last confirmed sighting (and fix) of an RC6 related bug (usually a system hang). Remove the parameter to stop users from setting dangerous values, as they often set it during triage and end up disabling the entire runtime pm instead (the option is not a fine scalpel!). Furthermore, it allows users to set known dangerous values which were intended for testing and not for production use. For testing, we can always patch in the required setting without having to expose ourselves to random abuse. v2: Fixup NEEDS_WaRsDisableCoarsePowerGating fumble, and document the lack of ilk support better. v3: Clear intel_info->rc6p if we don't support rc6 itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201113030.18360-1-chris@chris-wilson.co.uk
2017-11-20drm/i915: Remove i915.semaphores modparamChris Wilson
Having disabled the broken semaphores on Sandybridge, there is no need for a modparam any more, so remove it in favour of a simple HAS_LEGACY_SEMAPHORES() guard. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-5-chris@chris-wilson.co.uk
2017-11-20drm/i915: Remove i915.enable_execlists module parameterChris Wilson
Execlists and legacy ringbuffer submission are no longer feature comparable (execlists now offer greater functionality that should overcome their performance hit) and obsoletes the unsafe module parameter, i.e. comparing the two modes of execution is no longer useful, so remove the debug tool. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #i915_perf.c Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-1-chris@chris-wilson.co.uk
2017-10-04drm/i915: Remove use_mmio_flip modparm, v2.Maarten Lankhorst
This has been unused since commit afa8ce5b3080 ("drm/i915: Nuke legacy flip queueing code"). Changes since v1: - Rebase on top of all the changes to modparams. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> \o/-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004094416.31306-1-maarten.lankhorst@linux.intel.com
2017-09-26drm/i915: Extend I915_PARAMS_FOR_EACH with default member valueMichal Wajdeczko
By combining default value into helper macro we can initialize modparams struct in the same automatic way as it was declared. This will initialize members in the same order as declared and additionally will disallow declaring new member without proper default value for it. v2: make MEMBER macro more robust (Joonas) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170925105008.46060-2-michal.wajdeczko@intel.com
2017-09-22drm/i915: Rename global i915 to i915_modparamsMichal Wajdeczko
Our global struct with params is named exactly the same way as new preferred name for the drm_i915_private function parameter. To avoid such name reuse lets use different name for the global. v5: pure rename v6: fix Credits-to: Coccinelle @@ identifier n; @@ ( - i915.n + i915_modparams.n ) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
2017-09-15drm/i915: Extend private i915_param_named macro with descriptionMichal Wajdeczko
We're always specifying description of each module param in separate macro. Let's combine description into our main macro. Started with Coccinelle, followed by minor cleanup. @match1@ declarer name MODULE_PARM_DESC; identifier n; constant c; @@ ( - MODULE_PARM_DESC(n, c); ) @fix1 depends on match1@ declarer name i915_param_named; declarer name i915_param_named_unsafe; identifier match1.n; constant match1.c; @@ ( i915_param_named(n, ... + , c ); | i915_param_named_unsafe(n, ... + , c ); ) Suggested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-4-michal.wajdeczko@intel.com
2017-09-15drm/i915: Introduce custom variant of module_param_named macroMichal Wajdeczko
As we now use same name for public module param and its local representation we can simplify param definition macro. Changes done with Coccinelle: @@ declarer name module_param_named; declarer name module_param_named_unsafe; declarer name i915_param_named; declarer name i915_param_named_unsafe; identifier n; @@ ( -module_param_named(n, i915.n, +i915_module_param_named(n, ...); | -module_param_named_unsafe(n, i915.n, +i915_module_param_named_unsafe(n, ...); ) Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-3-michal.wajdeczko@intel.com
2017-09-15drm/i915: Rename lvds_use_ssc modparam to panel_use_sscMichal Wajdeczko
This modparam affects not only LVDS but also eDP panels. Additionally with this rename we will keep modparam and i915_params field name in sync. This patch will unblock us with further improvements around params defs. Suggested-by: Ville Syrjala <ville.syrjala@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170914150805.28376-2-michal.wajdeczko@intel.com
2017-08-17drm/i915/opregion: let user specify override VBT via firmware loadJani Nikula
Sometimes it would be most enlightening to debug systems by replacing the VBT to be used. For example, in the referenced bug the BIOS provides different VBT depending on the boot mode (UEFI vs. legacy). It would be interesting to try the failing boot mode with the VBT from the working boot, and see if that makes a difference. Add a module parameter to load the VBT using the firmware loader, not unlike the EDID firmware mechanism. As a starting point for experimenting, one can pick up the BIOS provided VBT from /sys/kernel/debug/dri/0/i915_opregion/i915_vbt. v2: clarify firmware load return value check (Bob) v3: kfree the loaded firmware blob References: https://bugs.freedesktop.org/show_bug.cgi?id=97822#c83 Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817115209.25912-1-jani.nikula@intel.com
2017-07-21Revert "drm/i915: Add heuristic to determine better way to adjust brightness"Jani Nikula
This reverts commit 560a758d39c616f83ac25ff6e0816a49ebe6401c. The DPCD backlight commits regress a Thinkpad X1 Carbon 4th Gen and a BXT-P (in CI). Enabling dynamic backlight boots to a black screen, and enabling DPCD backlight leads to a black screen after suspend/resume. References: http://mid.mail-archive.com/20170706135349.6tu3lz7uehazlnnn@boom References: http://mid.mail-archive.com/20170627132326.f2q3yn4bh5flji4q@boom Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101619 Reported-by: David Weinehall <david.weinehall@linux.intel.com> Fixes: 560a758d39c6 ("drm/i915: Add heuristic to determine better way to adjust brightness") Cc: Jenny TC <jenny.tc@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Puthikorn Voravootivat <puthik@chromium.org> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f49a89a05f18e90871c2eeadcdcd783ac7961cdf.1500542254.git.jani.nikula@intel.com
2017-07-21Revert "drm/i915: Add option to support dynamic backlight via DPCD"Jani Nikula
This reverts commit ae25eceab616d16a07bcaa434b84463d58a3bdc3. The DPCD backlight commits regress a Thinkpad X1 Carbon 4th Gen and a BXT-P (in CI). Enabling dynamic backlight boots to a black screen, and enabling DPCD backlight leads to a black screen after suspend/resume. References: http://mid.mail-archive.com/20170706135349.6tu3lz7uehazlnnn@boom References: http://mid.mail-archive.com/20170627132326.f2q3yn4bh5flji4q@boom Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101619 Reported-by: David Weinehall <david.weinehall@linux.intel.com> Fixes: ae25eceab616 ("drm/i915: Add option to support dynamic backlight via DPCD") Cc: Jenny TC <jenny.tc@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Puthikorn Voravootivat <puthik@chromium.org> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/051eeb592361985d2d06333c61c220dd92253b09.1500542254.git.jani.nikula@intel.com
2017-06-23drm/i915: Add option to support dynamic backlight via DPCDPuthikorn Voravootivat
This patch adds option to enable dynamic backlight for eDP panel that supports this feature via DPCD register and set minimum / maximum brightness to 0% and 100% of the normal brightness. Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170622190339.142671-4-puthik@chromium.org
2017-06-23drm/i915: Add heuristic to determine better way to adjust brightnessPuthikorn Voravootivat
Add heuristic to decide that AUX or PWM pin should use for backlight brightness adjustment and modify i915 param description to have auto, force disable, and force enable. The heuristic to determine that using AUX pin is better than using PWM pin is that the panel support any of the feature list here. - Regional backlight brightness adjustment - Backlight PWM frequency set - More than 8 bits resolution of brightness level - Backlight enablement via AUX and not by BL_ENABLE pin Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170622190339.142671-3-puthik@chromium.org
2017-06-20drm/i915: Enable Engine reset and recovery supportMichel Thierry
This feature is made available only from Gen8, for previous gen devices driver uses legacy full gpu reset. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Tomas Elf <tomas.elf@intel.com> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170615201828.23144-10-michel.thierry@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170620095751.13127-10-chris@chris-wilson.co.uk
2017-06-20drm/i915: Update i915.reset to handle engine resetsMichel Thierry
In preparation for engine reset work update this parameter to handle more than one type of reset. Default at the moment is still full gpu reset. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170615201828.23144-3-michel.thierry@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170620095751.13127-4-chris@chris-wilson.co.uk
2017-03-15drm/i915/uc: Add params for specifying firmwareArkadiusz Hiler
`guc_firmware_path` and `huc_firmware_path` module parameters are added. Using the parameter disables version checks and loads desired firmware instead of the default one. v2: make params unsafe && notice about disabled fw check (J. Lahtinen) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-02-09drm/i915: Enable atomic support by default on supported platforms.Maarten Lankhorst
i915 is pretty much feature complete. Support for atomic i915-specific connector properties is still missing; those properties can (for now) only be set through the legacy ioctl. ILK style watermarks and gen9+ watermarks are handled atomically, and nonblocking modesets work. FBC has also been made to work with atomic. gen4x- and vlv/chv watermarks still need to be fixed, so disable atomic by default there for now. Flip the switch!! Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486021302-24910-1-git-send-email-maarten.lankhorst@linux.intel.com [mlankhorst: Fix checkpatch warning about extra space in match_info] Acked-by: Daniel Stone <daniel@fooishbar.org> Reviewed-by: Lyude <lyude@redhat.com>
2017-02-06drm/i915: Use bool i915_param.alpha_supportChris Wilson
The alpha_support module option can only take one of two values, so assign it to a boolean type. The only advantage is in pretty printing via /sys/module/i915/parameters/alpha_support and elsewhere. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-2-chris@chris-wilson.co.uk
2016-11-24drm/i915: Use the precomputed value for whether to enable command parsingChris Wilson
As i915.enable_cmd_parser is an unsafe option, make it read-only at runtime. Now that it is constant, we can use the value determined during initialisation as to whether we need the cmdparser at execbuffer time. v2: Remove the inline for its single user, it is clear enough (and shorter) without! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161124125851.6615-1-chris@chris-wilson.co.uk
2016-11-14drm/i915: rename preliminary_hw_support to alpha_supportJani Nikula
The term "preliminary hardware support" has always caused confusion both among users and developers. It has always been about preliminary driver support for new hardware, and not so much about preliminary hardware. Of course, initially both the software and hardware are in early stages, but the distinction becomes more clear when the user picks up production hardware and an older kernel to go with it, with just the early support we had for the hardware at the time the kernel was released. The user has to specifically enable the alpha quality *driver* support for the hardware in that specific kernel version. Rename preliminary_hw_support to alpha_support to emphasize that the module parameter, config option, and flag are about software, not about hardware. Improve the language in help texts and debug logging as well. This appears to be a good time to do the change, as there are currently no platforms with preliminary^W alpha support. Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
2016-10-12drm/i915: Allow disabling error captureChris Wilson
We currently capture the GPU state after we detect a hang. This is vital for us to both triage and debug hangs in the wild (post-mortem debugging). However, it comes at the cost of running some potentially dangerous code (since it has to make very few assumption about the state of the driver) that is quite resource intensive. This patch introduces both a method to disable error capture at runtime (for users who hit bugs at runtime and need a workaround) and to disable error capture at compiletime (for realtime users who want to minimise any possible latency, and never require error capture, saving ~30k of code). The cost is that we now have to be wary of (and test!) a kconfig flag and a module parameter. The effect of the module parameter is easy to verify through code inspection and runtime testing, but a kconfig flag needs regular compile checking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/20161012090522.367-2-chris@chris-wilson.co.uk
2016-08-05drm/i915: Add a way to test the modeset done during gpu reset, v3.Maarten Lankhorst
Add force_reset_modeset_test as a parameter to force the modeset path during gpu reset. This allows a IGT test to set the knob and trigger a hang to force the gpu reset, even on platforms that wouldn't otherwise require it. Changes since v1: - Split out fix to separate commit. Changes since v2: - This commit is purely about force_reset_modeset_test now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: drv_hangman.reset-with-forced-modeset Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-07-19drm/i915/guc: Revert "drm/i915/guc: enable GuC loading & submission by default"Rodrigo Vivi
This reverts commit 041824ee25cfc535ba2d9a22c217df735ea2471e. We have latency issues that might impact the performance: #96606. and hangs and loading issues on resume after S4: #96526. This is also blocking a platform milestone so let's disable this for now while we make sure we don't have any more loading issue, or related basic hangs and it pass BAT for real in all platofmrs. In case BAT is wrong let's first fix BAT before re-enable it here. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96606 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Stable <stable@vger.kernel.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Christophe Prigent <christophe.prigent@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468884477-30086-1-git-send-email-rodrigo.vivi@intel.com
2016-06-21drm/i915: Set the access right of kernel param "i915.enable_gvt" to read-only.Zhi Wang
The access right of kernel param "i915.enable_gvt" should be read-only as it only applies during module load (and is not *runtime* writable). Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1466425022-3709-1-git-send-email-zhi.a.wang@intel.com
2016-06-17drm/i915: gvt: Introduce the basic architecture of GVT-gZhi Wang
This patch introduces the very basic framework of GVT-g device model, includes basic prototypes, definitions, initialization. v12: - Call intel_gvt_init() in driver early initialization stage. (Chris) v8: - Remove the GVT idr and mutex in intel_gvt_host. (Joonas) v7: - Refine the URL link in Kconfig. (Joonas) - Refine the introduction of GVT-g host support in Kconfig. (Joonas) - Remove the macro GVT_ALIGN(), use round_down() instead. (Joonas) - Make "struct intel_gvt" a data member in struct drm_i915_private.(Joonas) - Remove {alloc, free}_gvt_device() - Rename intel_gvt_{create, destroy}_gvt_device() - Expost intel_gvt_init_host() - Remove the dummy "struct intel_gvt" declaration in intel_gvt.h (Joonas) v6: - Refine introduction in Kconfig. (Chris) - The exposed API functions will take struct intel_gvt * instead of void *. (Chris/Tvrtko) - Remove most memebers of strct intel_gvt_device_info. Will add them in the device model patches.(Chris) - Remove gvt_info() and gvt_err() in debug.h. (Chris) - Move GVT kernel parameter into i915_params. (Chris) - Remove include/drm/i915_gvt.h, as GVT-g will be built within i915. - Remove the redundant struct i915_gvt *, as the functions in i915 will directly take struct intel_gvt *. - Add more comments for reviewer. v5: Take Tvrtko's comments: - Fix the misspelled words in Kconfig - Let functions take drm_i915_private * instead of struct drm_device * - Remove redundant prints/local varible initialization v3: Take Joonas' comments: - Change file name i915_gvt.* to intel_gvt.* - Move GVT kernel parameter into intel_gvt.c - Remove redundant debug macros - Change error handling style - Add introductions for some stub functions - Introduce drm/i915_gvt.h. Take Kevin's comments: - Move GVT-g host/guest check into intel_vgt_balloon in i915_gem_gtt.c v2: - Introduce i915_gvt.c. It's necessary to introduce the stubs between i915 driver and GVT-g host, as GVT-g components is configurable in kernel config. When disabled, the stubs here do nothing. Take Joonas' comments: - Replace boolean return value with int. - Replace customized info/warn/debug macros with DRM macros. - Document all non-static functions like i915. - Remove empty and unused functions. - Replace magic number with marcos. - Set GVT-g in kernel config to "n" by default. Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-5-git-send-email-zhi.a.wang@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-06-07drm/i915/guc: enable GuC loading & submission by defaultDave Gordon
The recent patch . fce91f2 drm/i915/guc: add enable_guc_loading parameter enabled GuC loading and submission by default, but as issues were found with warnings being issued during suspend-resume cycles, GuC loading was disabled by default, by patch . 2335986 drm/i915/guc: Disable automatic GuC firmware loading Those warnings have been resolved, so this patch re-enables GuC loading and submission by default. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465287291-2187-1-git-send-email-david.s.gordon@intel.com
2016-05-25drm/i915: Revert async unpin and nonblocking atomic commitDaniel Vetter
This reverts the following patches: d55dbd06bb5e1399aba9ab5227465339d1bbefff drm/i915: Allow nonblocking update of pageflips. 15c86bdb760185e871c7a0f559978328aa500971 drm/i915: Check for unpin correctness. 95c2ccdc82d520f59ae3b6fdc097b63c9b7082bb Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates" a6747b7304a9d66758a196d885dab8bbfa5e7d1f drm/i915: Make unpin async. 03f476e1fcb42fca88fc50b94b0d3adbdbe887f0 drm/i915: Prepare connectors for nonblocking checks. 2099deffef4404f949ba1b68d2b17e0608190bc2 drm/i915: Pass atomic states to fbc update functions. ee7171af72c39c18b7d7571419a4ac6ca30aea66 drm/i915: Remove reset_counter from intel_crtc. 2ee004f7c59b2e642f0bb2834f847d756f2dd7b7 drm/i915: Remove queue_flip pointer. b8d2afae557dbb9b9c7bc6f6ec4f5278f3c4c34e drm/i915: Remove use_mmio_flip kernel parameter. 8dd634d922615ec3a9af7976029110ec037f8b50 drm/i915: Remove cs based page flip support. 143f73b3bf48c089b40f58462dd7f7c199fd4f0f drm/i915: Rework intel_crtc_page_flip to be almost atomic, v3. 84fc494b64e8c591be446a966b7447a9db519c88 drm/i915: Add the exclusive fence to plane_state. 6885843ae164e11f6c802209d06921e678a3f3f3 drm/i915: Convert flip_work to a list. aa420ddd8eeaa5df579894a412289e4d07c2fee9 drm/i915: Allow mmio updates on all platforms, v2. afee4d8707ab1f21b7668de995be3a5961e83582 Revert "drm/i915: Avoid stalling on pending flips for legacy cursor updates" "drm/i915: Allow nonblocking update of pageflips" should have been split up, misses a proper commit message and seems to cause issues in the legacy page_flip path as demonstrated by kms_flip. "drm/i915: Make unpin async" doesn't handle the unthrottled cursor updates correctly, leading to an apparent pin count leak. This is caught by the WARN_ON in i915_gem_object_do_pin which screams if we have more than DRM_I915_GEM_OBJECT_MAX_PIN_COUNT pins. Unfortuantely we can't just revert these two because this patch series came with a built-in bisect breakage in the form of temporarily removing the unthrottled cursor update hack for legacy cursor ioctl. Therefore there's no other option than to revert the entire pile :( There's one tiny conflict in intel_drv.h due to other patches, nothing serious. Normally I'd wait a bit longer with doing a maintainer revert, but since the minimal set of patches we need to revert (due to the bisect breakage) is so big, time is running out fast. And very soon (especially after a few attempts at fixing issues) it'll be really hard to revert things cleanly. Lessons learned: - Not a good idea to rush the review (done by someone fairly new to the area) and not make sure domain experts had a chance to read it. - Patches should be properly split up. I only looked at the two patches that should be reverted in detail, but both look like the mix up different things in one patch. - Patches really should have proper commit messages. Especially when doing more than one thing, and especially when touching critical and tricky core code. - Building a patch series and r-b stamping it when it has a built-in bisect breakage is not a good idea. - I also think we need to stop building up technical debt by postponing atomic igt testcases even longer. I think it's clear that there's enough corner cases in this beast that we really need to have the testcases _before_ the next step lands. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-05-24drm/i915/guc: Disable automatic GuC firmware loadingTvrtko Ursulin
New GuC code is logging errors at runtime suspend and resume which causes CI testing to log "orange" status. Default to not trying to load the firmware until this is resolved. Example of the log: [drm] RC6 on [drm:intel_runtime_suspend] Suspending device [drm:host2guc_action [i915]] *ERROR* GUC: host2guc action 0x501 failed. ret=-110 status=0x00000501 response=0x40000000 ... [drm:intel_runtime_resume] Resuming device [drm:host2guc_action [i915]] *ERROR* GUC: host2guc action 0x502 failed. ret=-110 status=0x00000502 response=0x40000000 [drm:intel_runtime_resume] Device resumed Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Harris <chris.harris@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1464017675-12257-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-05-23drm/i915/guc: add enable_guc_loading parameterDave Gordon
Split the function of "enable_guc_submission" into two separate options. The new one ("enable_guc_loading") controls only the *fetching and loading* of the GuC firmware image. The existing one is redefined to control only the *use* of the GuC for batch submission once the firmware is loaded. In addition, the degree of control has been refined from a simple bool to an integer key, allowing several options: -1 (default) whatever the platform default is 0 DISABLE don't load/use the GuC 1 BEST EFFORT try to load/use the GuC, fallback if not available 2 REQUIRE must load/use the GuC, else leave the GPU wedged The new platform default (as coded here) will be to attempt to load the GuC iff the device has a GuC that requires firmware, but not yet to use it for submission. A later patch will change to enable it if appropriate. v4: Changed some error-message levels, mostly ERROR->INFO, per review comments by Tvrtko Ursulin. v5: Dropped one more error message, disabled GuC submission on hypothetical firmware-free devices [Tvrtko Ursulin]. v6: Logging tidy by Tvrtko Ursulin: * Do not log falling back to execlists when wedging the GPU. * Do not log fw load errors when load was disabled by user. * Pass down some error code from fw load for log message to make more sense. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nick Hoath <nicholas.hoath@intel.com> (v6)
2016-05-19drm/i915: Remove use_mmio_flip kernel parameter.Maarten Lankhorst
With the removal of cs flips this is always force enabled. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-14-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
2016-04-26drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)Yetunde Adebisi
This patch adds support for eDP backlight control using DPCD registers to backlight hooks in intel_panel. It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported. v2: Moved backlight functions from intel_dp.c into a new file intel_dp_aux_backlight.c. Also moved reading of eDP display control registers to intel_dp_get_dpcd v3: Correct some formatting mistakes v4: Updated to use AUX backlight control if PWM control is not possible (Jani) v5: Moved call to initialize backlight registers to dp_aux_setup_backlight v6: Check DP_EDP_BACKLIGHT_PIN_ENABLE_CAP is disabled before setting up AUX backlight control. To fix BLM_PWM_ENABLE igt test warnings on bdw_ultra v7: Add enable_dpcd_backlight module parameter. v8: Rebase onto latest drm-intel-nightly branch v9: Remove changes to intel_dp_dpcd_read_wake Split addition edp_dpcd variable into a separate patch Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Yetunde Adebisi <yetundex.adebisi@intel.com> [Jani: whitepace changes to appease checkpatch] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-4-git-send-email-yetundex.adebisi@intel.com
2016-03-17drm/i915: Add fault injection supportImre Deak
Add support for forcing an error at selected places in the driver. As an example add 4 options to fail during driver loading. Requested by Chris. v2: - Add fault point for modeset initialization - Print debug message when injecting an error v3: - Rename inject_fault to inject_load_failure, rename the related macros and helper accordingly (Chris) - Use a counter instead of a mask to identify the failure point (Daniel) - Mark the module option as _unsafe and keep i915_params ordered (Joonas) v4: - Rebase on latest -nightly v5: - Use DRM_INFO instead of DRM_DEBUG_DRIVER, making it clearer in CI reports that a following error message is expected (IRC r-b from Chris on v5) CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-03-16drm/i915: add module param "enable_dp_mst"Nathan Schulte
Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915 drm driver: "enable_dp_mst", which is enabled by default. Disabling the parameter forces newly connected DisplayPort sinks to report as not supporting multi-stream transport (MST), thus "forcing" the use of single-stream transport (SST). v2: rename parameter to conform to style v3: add signoff Signed-off-by: Nathan Schulte <nmschulte@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
2016-02-19drm/i915: drop unused i915.disable_vtd_wa module parameterJani Nikula
This is a manual revert of commit 7a10dfa638be26669f0987b6a21a65e6b39356b2 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Apr 1 09:33:47 2014 +0200 drm/i915: Add debug module option for VTd validation as no users have appeared. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455621493-6865-2-git-send-email-jani.nikula@intel.com
2016-02-19drm/i915: drop write perm from module params which don't support changingJani Nikula
We've given write permissions to dynamically change some module parameters through /sys/module/i915/parameters although they only support setting on module load. Fix the permissions. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455621493-6865-1-git-send-email-jani.nikula@intel.com
2016-02-17drm/i915: Change i915.enable_psr parameter to use per platform default.Rodrigo Vivi
This will give us flexibility to enable PSR by default independently so issues and corner cases in one platform won't affect others were we have it working properly. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-01drm/i915: Instrument PSR parameter for debuging with link standby x link off.Rodrigo Vivi
Unfortunately we don't know all panels and platforms out there and we found internal prototypes without VBT proper set but where only link in standby worked well. So, before enable PSR by default let's instrument the PSR parameter in a way that we can identify different panels out there that might require or work better with link standby mode. It is also useful to say that for backward compatibility I'm not changing the meaning of this flag. So "0" still means disabled and "1" means enabled with full support and maximum power savings. v2: Use positive value instead of negative for different operation mode as suggested by Daniel. v3: As Paulo suggested use 2 to force link standby and 3 to force link fully on. Also split the link_standby introduction in a separated patch. v4: Use DRM_ERROR for link off request on platforms that don't support and Remove the quirk promise. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454356928-19779-1-git-send-email-rodrigo.vivi@intel.com
2015-12-21drm/i915: Decouple struct i915_params i915 into i915_params.hJoonas Lahtinen
Otherwise usage in the i915 debug macros yields problems due to i915_drv.h <-> i915_trace.h <-> intel_drv.h include loops. v2: - Document not-so-obvious need for linux/cache.h (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450436898-20408-2-git-send-email-joonas.lahtinen@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-23Merge tag 'v4.4-rc2' into drm-intel-next-queuedDaniel Vetter
Linux 4.4-rc2 Backmerge to get at commit 1b0e3a049efe471c399674fd954500ce97438d30 Author: Imre Deak <imre.deak@intel.com> Date: Thu Nov 5 23:04:11 2015 +0200 drm/i915/skl: disable display side power well support for now so that we can proplery re-eanble skl power wells in -next. Conflicts are just adjacent lines changed, except for intel_fbdev.c where we need to interleave the changs. Nothing nefarious. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-11-19Revert "drm/i915: skip modeset if compatible for everyone."Jani Nikula
This reverts commit 6764e9f8724f1231b4deac53b9a82286ac0830e7 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Aug 27 15:44:06 2015 +0200 drm/i915: skip modeset if compatible for everyone. Bring back the i915.fastboot module parameter, disabled by default, due to backlight regression on Chromebook Pixel 2015. Apparently the firmware of the Chromebook in question enables the panel but disables backlight to avoid a brief garbage scanout upon loading the kernel/module. With fastboot, we leave the backlight untouched, in this case disabled. The user would have to do a modeset (i.e. not just crank up the brightness) to enable the backlight. There is no clean fix readily available, so get back to the drawing board by reverting. [N.B. The reference below is for when the thread was included on public lists, and some of the context had already been dropped by then.] Reported-and-tested-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com Fixes: 6764e9f8724f ("drm/i915: skip modeset if compatible for everyone.") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com
2015-11-17drm/i915/gen9: Add boot parameter for disabling DC6Patrik Jakobsson
v2: Use _unsafe (Jani) v3: Allow specifying specific DC-states instead of just DC6 (Imre) Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447682467-6237-3-git-send-email-patrik.jakobsson@linux.intel.com
2015-11-17drm/i915: fix handling of the disable_power_well module optionImre Deak
When this option is 0 (so the power well support is disabled) we are supposed to enable all power wells once and don't disable them unless we system suspend the device. Currently if the option is 0, we can call the power well enable handlers multiple times, whenever their refcount changes from 0->1. This may not be a problem for the HW, but it's not logical and may trigger some warnings in the power well code which doesn't expect this. So simply keep around a reference while we are not system suspended to solve this. For simplicity mark the module option read only, so we don't need to deal with re-enabling the feature during runtime. If someone really needs that it could be added later in a more proper way. v2: - fix typo in comment in intel_power_domains_suspend() (Patrik) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447775063-24438-1-git-send-email-imre.deak@intel.com
2015-11-06drm/i915/skl: disable display side power well support for nowImre Deak
The display power well support on this platform is in a somewhat broken state atm, so disable it by default. This in effect will get rid of incorrect assert WARNs about the CSR/DMC firmware not being loaded during power well toggling. It also removes a problem during driver loading where a register is accessed while its backing power well is down, resulting in another WARN. Until we come up with the root cause of the second problem and the proper fix for both issues, keep all display side power wells on. Also clarify a bit the option description. Reported-by: Dave Airlie <airlied@redhat.com> Reference: http://mid.gmane.org/CAPM=9tyjBQjSBTKa49cRr6SYkpNW7Pq-fUFznZZ8Y1snvvk7mA@mail.gmail.com Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446757451-2777-1-git-send-email-imre.deak@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-10-19drm/i915/gen8: Flip the 48b switchMichel Thierry
Use 48b addresses if hw supports it (i915.enable_ppgtt=3). Update the sanitize_enable_ppgtt for 48 bit PPGTT mode. Note, aliasing PPGTT remains 32b only. v2: s/full_64b/full_48b/. (Akash) v3: Add sanitize_enable_ppgtt changes until here. (Akash) v4: Update param description (Chris) Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-22drm/i915: Mark debug mod options as _unsafeDaniel Vetter
We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-14drm/i915: skip modeset if compatible for everyone.Maarten Lankhorst
This is done as a separate commit, to make it easier to revert when things break. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-26Partially revert "drm/i915: Use full atomic modeset."Maarten Lankhorst
This partially reverts commit 74c090b1bdc57b1c9f1361908cca5a3d8a80fb08. The DRIVER_ATOMIC cap cannot yet be exported because i915 lacks async support. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit (git 2.34.1) at 2024-06-26 06:36:36 +0000