Age | Commit message (Collapse) | Author |
|
GT VEBOX DISABLE is only 4 bits wide but it was using a 8 bits wide
mask, the remaning reserved bits is set to 0 causing 4 more
nonexistent VEBOX engines being detected as enabled, triggering the
BUG_ON() because of mismatch between vebox_mask and newly added
VEBOX_MASK().
[ 64.081621] [drm:intel_device_info_init_mmio [i915]] vdbox enable: 0005, instances: 0005
[ 64.081763] [drm:intel_device_info_init_mmio [i915]] vebox enable: 00f1, instances: 0001
[ 64.081825] intel_device_info_init_mmio:925 GEM_BUG_ON(vebox_mask != ({ unsigned int first__ = (VECS0); unsigned int count__ = (2); ((&(dev_priv)->__info)->engine_mask & (((~0UL) - (1UL << (first__)) + 1) & (~0UL >> (64 - 1 - (first__ + count__ - 1))))) >> first__; }))
[ 64.082047] ------------[ cut here ]------------
[ 64.082054] kernel BUG at drivers/gpu/drm/i915/intel_device_info.c:925!
BSpec: 20680
Fixes: 26376a7e74d2 ("drm/i915/icl: Check for fused-off VDBOX and VEBOX instances")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326230223.26336-1-jose.souza@intel.com
(cherry picked from commit 547fcf9b1c608cf5c43c156a8773a94c6a38dc44)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This patch fixes the PORT_SYNC_MODE_MASTER_SELECT macro
to correctly do the left shifting to set the port sync
master select correctly.
I have tested this fix on ICL.
Fixes: 49edbd49786e ("drm/i915/icl: Define TRANS_DDI_FUNC_CTL DSI registers")
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319221847.21311-1-manasi.d.navare@intel.com
(cherry picked from commit 7264aebb81d15aa6bbed650c816bba90f026bc35)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The unused bits on PLANE_WM & co. are hardwired to zero. So no
need to worry about reading the extra bit on pre-icl.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205205056.30081-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
On icl the plane watermark blocks field is 11 bits. Bump our define to
match so that readout won't ignore the extra bit. We can safely do this
for older platforms too since the unused bits are hardwired to zero.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205205056.30081-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Disabling WM1+ on ICL causes tons of underruns with
linear/X-tiled framebuffers. We can avoid this by flipping
on a chicken bit affecting the way the hw fill the FIFO.
This may not be the final solution but should hopefully
avoid some underruns in the meantime.
v2: Apparently PIPE_CHICKEN is icl+ only
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204202232.27153-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Enables blend optimization for floating point RTs
This restores the workaround that was reverted in c358514ba8da
("Revert "drm/i915/icl: WaEnableFloatBlendOptimization"").
The revert was due to the register write seemingly not sticking,
but the HW team has confirmed that this is because the
register is WO and that the workaround is indeed required.
Here the wa is added with a mask of 0 since the register is WO.
References: https://hsdes.intel.com/resource/1408134172
References: https://bugs.freedesktop.org/show_bug.cgi?id=107338
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Talha Nassar <talha.nassar@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1548983324-15344-4-git-send-email-talha.nassar@intel.com
|
|
We don't yet allow userspace to control the CRTC background color, but
we should manually program the color to black to ensure the BIOS didn't
leave us with some other color. We should also set the pipe gamma and
pipe CSC bits so that the background color goes through the same color
management transformations that a plane with black pixels would.
v2: Rename register to SKL_BOTTOM_COLOR to more closely follow
bspec naming. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130185122.10322-2-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
Fix the TODO leftover in the code by changing the argument in MG_PLL
macros. The MG_PLL ids used to access the register values can be
converted from tc_port rather than port.
All these registers can use the TC port to calculate the right offsets
because they are only available for TC ports. The range (PORT_C onwards)
may not be stable and change from platform to platform. So by using the
TC id directly we avoid having to check for the platform in the "leaf
functions" and thus passing dev_priv around.
The helper functions were also renamed to use "tc" as prefix to make
them more generic.
v2: Improve commit message and fix checkpatch warning (from Paulo)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-2-lucas.demarchi@intel.com
|
|
To make vblank timestamps work better with the TV encoder let's
scale the pipe timings such that the relationship between the
TV active and TV blanking periods is mirrored in the
corresponding pipe timings.
Note that in reality the pipe runs at a faster speed during the
TV vblank, and correspondigly there are periods when the pipe
is enitrely stopped. We pretend that this isn't the case and
as such we incur some error in the vblank timestamps during
the TV vblank. Further explanation of the issues in a big
comment in the code.
This makes the vblank timestamps good enough to make
i965gm (which doesn't have a working frame counter with
the TV encoder) report correct frame numbers. Previously
you could get all kinds of nonsense which resulted in
eg. glxgears reporting that it's running at twice the
actual framerate in most cases.
v2: s/IS_GEN4(dev_priv)/IS_GEN(dev_priv, 4)/ in the comment
for consistency
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112170000.27531-15-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
This register contains how many blocks was sent in the past selective
updates.
Those registers are not kept set all the times but polling it after flip
can show the values corresponding to the last 8 frames.
v2: Improved macros(Dhinakaran)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-3-jose.souza@intel.com
|
|
It's superfluous.
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7987938a7950853ac3ee43c82fb9cbb0cd59a2fa.1547726792.git.jani.nikula@intel.com
|
|
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Minor checkpatch fixes sprinkled on top of the changed lines.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14ed72e7f04c9340a057855c5950b54811f8a477.1547629303.git.jani.nikula@intel.com
|
|
CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.
v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)
Fixes: 4e53840fdfdd ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com
|
|
Hide the way device info is stored, in preparation of making device info
a pointer to the const rodata in i915_pci.c. No functional changes.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3cd626f248c0d6638f1288938bbb577a12286050.1546267488.git.jani.nikula@intel.com
|
|
Add a macro wrapper for display_mmio_offset access in register
definitions. Prep work for reducing direct dev_priv->info usage. No
functional changes.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa4e8fd85e0445ec5be6c55151239072b4315fda.1546267488.git.jani.nikula@intel.com
|
|
In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.
v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
|
|
SFC (Scaler & Format Converter) units are shared between VD and VEBoxes.
They also happen to have separate reset bits. So, whenever we want to reset
one or more of the media engines, we have to make sure the SFCs do not
change owner in the process and, if this owner happens to be one of the
engines being reset, we need to reset the SFC as well.
This happens in 4 steps:
1) Tell the engine that a software reset is going to happen. The engine
will then try to force lock the SFC (if currently locked, it will
remain so; if currently unlocked, it will ignore this and all new lock
requests).
2) Poll the ack bit to make sure the hardware has received the forced
lock from the driver. Once this bit is set, it indicates SFC status
(lock or unlock) will not change anymore (until we tell the engine it
is safe to unlock again).
3) Check the usage bit to see if the SFC has ended up being locked to
the engine we want to reset. If this is the case, we have to reset
the SFC as well.
4) Unlock all the SFCs once the reset sequence is completed.
Obviously, if we are resetting the whole GPU, we don't have to worry
about all of this.
BSpec: 10989
BSpec: 10990
BSpec: 10954
BSpec: 10955
BSpec: 10956
BSpec: 19212
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-4-chris@chris-wilson.co.uk
|
|
There are two panel power sequencers. Each register
has two addressable instances. This patch defines
both the instances of Panel power control register
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/99bb687b17a9165527a6210a79271c8175c8a4e3.1543500286.git.jani.nikula@intel.com
|
|
This patch define missing bitfield for shortplug ctl ddi
register which will be used for ICL DSI GPIO programming.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b9feb75eb6c303556b91c8a23c505a4593a99a1.1543500286.git.jani.nikula@intel.com
|
|
If FEC is supported, the corresponding
DP_TP_CTL register bits have to be configured.
The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register
and wait till FEC_STATUS in DP_TP_CTL[28] is 1.
Also add the warn message to make sure that the control
register is already active while enabling FEC.
v2:
- Change commit message. Configure fec state after
link training (Manasi, Gaurav)
- Remove redundent checks (Manasi)
- Remove the registers that get added automagically (Anusha)
v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav)
v4: rebased.
v5:
- Move the code to the proper spot, according to spec.(Ville)
- Use fec state as a check too.
v6: Pass intel_encoder, instead of intel_dp. (Ville)
v7: Remove unwanted comments (Manasi)
Cc: dri-devel@lists.freedesktop.org
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-16-manasi.d.navare@intel.com
|
|
Infoframes are used to send secondary data packets. This patch
adds support for DSC Picture parameter set secondary data packets
in the existing write_infoframe helpers.
v3:
* Unused variables cleanup (Ville)
v2:
* Rebase on drm-tip (Manasi)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-9-manasi.d.navare@intel.com
|
|
Depending on the transcoder enum values to translate from transcoder to
the corresponding CHICKEN_TRANS register can easily break if we add a
new transcoder. Add an explicit mapping instead, by using helpers to
look up the register instance either by transcoder or port (since
unconveniently the registers have both port and transcoder specific
bits).
While at it also check for the correctness of GEN, port, transcoder. I
wasn't sure if psr2_enabled can only be set for GEN9+, but that seems to
be the case indeed (see setting of sink_psr2_support in
intel_psr_init_dpcd()).
v2 (Ville):
- Make gen9_chicken_trans_reg() internal to intel_psr.c.
- s/trans/cpu_transcoder/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119180021.370-1-imre.deak@intel.com
|
|
Depending on the transcoder enum values to translate from transcoder
to EDP PSR flags can easily break if we add a new transcoder. So remove
the dependency by using an explicit mapping.
While at it also add a WARN for unexpected trancoders.
v2:
- Simplify things by defining flag shift values instead of indices.
- s/trans/cpu_transcoder/ (Ville)
v3:
- Define flags to look like separate bits instead of the values of
the same bitfield. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120092325.21249-2-imre.deak@intel.com
|
|
Userspace portion is still missing.
This reverts commit cd956bfcd0f58d20485ac0a785415f7d9327a95f.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-1-joonas.lahtinen@linux.intel.com
|
|
This got duplicated on introducing icl workarounds.
Fix by using the older definition and moving the wa bit
definition there. No functional changes.
v3: avoid fixes tag, whitespace (Chris)
References: 908ae0517363 ("drm/i915/icl: WaDisCtxReload")
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145333.10570-1-mika.kuoppala@linux.intel.com
|
|
Although CNP names this field "Counter Fraction", what we write to the
register is really the denominator for the fractional part of the
divider, not the fractional part (and the field description even says
that). The ICP spec renamed the field to "Counter Fraction
Denominator", which makes a lot more sense. Use the more complete ICL
naming because we will merge the CNP and ICP functions into a single
one, which will introduce the concept of the numerator. That will make
a lot more sense when you read the "num/frac = den" calculation.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-2-paulo.r.zanoni@intel.com
|
|
Due to the constant alpha we're going to have to program two of
the the tree keying registers anyway, so might as well always
program all three.
And parametrize the plane constant alpha define while at it.
v2: Rebase due to input CSC
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107184138.31359-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Defined the plane input csc coefficient registers and macros.
6 registers are used to program a total of 9 coefficients,
added macros to define each of them for all the planes
supporting the feature on pipes. On ICL, bottom 3 planes
have this capability.
v2: Segregated the register macro definition as separate patch
as per Maarten's suggestion.
v3: Removed a redundant 3rd Pipe register definition and
simplified the equally spaced register definition by adding an
offset as per Matt's comment.
v4: No Change
v5: Renamed the register Macro as per Matt's suggestion.
v6: No Change
v7: No Change
v8: No Change
v9: No Change
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541099420-12419-2-git-send-email-uma.shankar@intel.com
|
|
The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset
from the base - which is the FLexi IO Adaptor. Lets follow the
offset calculation while accessing these registers.
v2:
- Follow spec for numbering - s/0/1(Lucas)
- s/FIA_1/FIA1_BASE (Anusha)
v3:
- Remove register offset defines. (Jani)
- Update comment. (Anusha)
v4: rebase. Remove comment.(Lucas)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101185557.29585-1-anusha.srivatsa@intel.com
|
|
Keep the register choosing macros together. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-4-jani.nikula@intel.com
|
|
Try to make it slightly less of an eye sore. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-3-jani.nikula@intel.com
|
|
Minor semantic nit, no functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-2-jani.nikula@intel.com
|
|
The device info offset arrays for unevenly spaced register offsets is
great for widely used registers. However, the palette registers are only
used in one function, i9xx_load_luts_internal(), and only for GMCH
platforms, wasting device info. Replace palette_offsets with _PICK() in
palette register definition.
While the use of _PICK() does not check for pipe C existence, neither
does the current offset array usage, and leads to bogus address when
pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads
to a sensible register offset, just non-existing on non-CHV. Either way,
this shouldn't happen anyway.
Remove unused old palette macros while at it.
Bloat-o-meter results below for completeness.
add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184)
Function old new delta
i9xx_load_luts_internal 394 483 +89
i915_driver_load 5103 5107 +4
g4x_pre_enable_dp 378 379 +1
intel_engines_init_mmio 1117 1116 -1
intel_engine_lookup_user 47 46 -1
hdmi_port_clock_valid 310 309 -1
gen11_irq_handler 707 706 -1
intel_device_info_dump_runtime 329 311 -18
intel_device_info_runtime_init 5166 4910 -256
Total: Before=918650, After=918466, chg -0.02%
add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576)
Data old new delta
intel_valleyview_info 200 188 -12
intel_skylake_gt4_info 200 188 -12
intel_skylake_gt3_info 200 188 -12
intel_skylake_gt2_info 200 188 -12
intel_skylake_gt1_info 200 188 -12
intel_sandybridge_m_gt2_info 200 188 -12
intel_sandybridge_m_gt1_info 200 188 -12
intel_sandybridge_d_gt2_info 200 188 -12
intel_sandybridge_d_gt1_info 200 188 -12
intel_pineview_info 200 188 -12
intel_kabylake_gt3_info 200 188 -12
intel_kabylake_gt2_info 200 188 -12
intel_kabylake_gt1_info 200 188 -12
intel_ivybridge_q_info 200 188 -12
intel_ivybridge_m_gt2_info 200 188 -12
intel_ivybridge_m_gt1_info 200 188 -12
intel_ivybridge_d_gt2_info 200 188 -12
intel_ivybridge_d_gt1_info 200 188 -12
intel_ironlake_m_info 200 188 -12
intel_ironlake_d_info 200 188 -12
intel_icelake_11_info 200 188 -12
intel_i965gm_info 200 188 -12
intel_i965g_info 200 188 -12
intel_i945gm_info 200 188 -12
intel_i945g_info 200 188 -12
intel_i915gm_info 200 188 -12
intel_i915g_info 200 188 -12
intel_i865g_info 200 188 -12
intel_i85x_info 200 188 -12
intel_i845g_info 200 188 -12
intel_i830_info 200 188 -12
intel_haswell_gt3_info 200 188 -12
intel_haswell_gt2_info 200 188 -12
intel_haswell_gt1_info 200 188 -12
intel_gm45_info 200 188 -12
intel_geminilake_info 200 188 -12
intel_g45_info 200 188 -12
intel_g33_info 200 188 -12
intel_coffeelake_gt3_info 200 188 -12
intel_coffeelake_gt2_info 200 188 -12
intel_coffeelake_gt1_info 200 188 -12
intel_cherryview_info 200 188 -12
intel_cannonlake_info 200 188 -12
intel_broxton_info 200 188 -12
intel_broadwell_rsvd_info 200 188 -12
intel_broadwell_gt3_info 200 188 -12
intel_broadwell_gt2_info 200 188 -12
intel_broadwell_gt1_info 200 188 -12
Total: Before=195529, After=194953, chg -0.29%
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-1-jani.nikula@intel.com
|
|
This patch fixes the naming of the registers:
s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL
And also fix the hex values to lower case, to match
rest of the definitions.
Manasi noticed this with the patch that was merged.
v2: fix "Fixes" tag.
Fixes: 8b1b558d690a ("drm/i915/icl: Add DSS_CTL Registers")
Suggested-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101214216.8958-1-anusha.srivatsa@intel.com
|
|
Required for Bindless samplers.
Userspace consumer: mesa
V2: Rebase
V3: Update commit message
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-4-radhakrishna.sripada@intel.com
|
|
Gen11 Display suports 32 planes in total. Enable the new format in context
status to be used and expanded to 32 planes.
V2: Move the WA to display WA's(Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-1-radhakrishna.sripada@intel.com
|
|
Add defines for DSS_CTL registers.
These registers specify the big joiner, splitter,
overlap pixels and info regarding
compression enabled on left or right branch.
v2:
- rebase. Remove overlapping defines(James Ausmus)
- Rename the register to ICL_DSS_CTL1/2_PIPE_ (manasi)
- take pixels as an argument for overlap.(Manasi)
v3:
- rebase. merge DSS_CTL1/2 introduced in Madhav's patch
to avoid confusion (madhav chauhan)
- Rename registers in accordance to BSpec (Madhav, Rodrigo)
- Add define to conditionally check the buffer target depth (James Ausmus)
v4:
- remove redundant definitions.(madhav)
v5:
- Add mask for overlap pixels.
- Code Style changes.(Madhav)
v6:
- Code style changes. (Madhav)
Suggested-by: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Gaurav Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07021336cb87d09e8f97fbff709c4e686d7de536.1540900289.git.jani.nikula@intel.com
|
|
This patch defines payload/header registers for each DSI
transcoder used for transmitting DSI packets.
v2 by Jani:
- Drop full register mask and shift for payload
- Use lower case for hex 0x
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18275c49215e512347a14bc38715314c2d6f95a4.1540900289.git.jani.nikula@intel.com
|
|
This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.
Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com
|
|
Add the newly added slice_row_per_frame parameter
in the Picture Parameter Set registers.
This defines the number of vertically stacked slices
in a frame.
Credits to Manasi for noticing bSpec change.
Suggested-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-1-manasi.d.navare@intel.com
|
|
This patch defines DSI_HTX_TO, DSI_LRX_H_TO, DSI_PWAIT_TO
and DSI_TA_TO registers for DSI transcoders '0' and '1'.
They are used for contention recovery on DPHY.
v2: Define SHIFT for bitfields.
v3 by Jani:
- Fix timeout bit definitions
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b943c028a05edfd61c511d712c65c7e8bf70211.1540900289.git.jani.nikula@intel.com
|
|
The bits weren't defined in descending order.
v2: Move definitions in a separate patch (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-2-dhinakaran.pandiyan@intel.com
|
|
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the
definitions are unused.
v2: Moves definitions in another patch (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com
|
|
Intel HDCP2.2 registers are defined with addr offsets and bit details.
v2:
Replaced the arith calc with _PICK [Sean Paul]
v3:
No changes.
v4:
%s/HDCP2_CTR_DDI/HDCP2_CTL_DDI [Uma]
v5:
Added parentheses for the parameters of macro.
v6:
No changes
v7:
No changes
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540806351-7137-7-git-send-email-ramalingam.c@intel.com
|
|
The UV plane is the master plane that does all color correction etc.
It needs to be programmed with the dimensions for color plane 1 (UV).
The Y plane just feeds the Y pixels to it. Program the scaler from the
master only, and set PLANE_CTL_YUV420_Y_PLANE on the slave plane.
Changes since v1:
- Make a common skl_program_plane, and use it for both plane updates.
Changes since v2:
- Make color_plane explicit, to clarify skl_update_plane(). (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-8-maarten.lankhorst@linux.intel.com
|
|
We configure the chroma upsampler with the same chroma siting as
used by the scaler for consistency, the chroma upsampler is used
instead of the scaler for YUV 4:2:0 on ICL's HDR planes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-7-maarten.lankhorst@linux.intel.com
|
|
The first 3 planes (primary, sprite 0 and 1) have a dedicated chroma
upsampler to upscale YUV420 to YUV444 and the scaler should only be
used for upscaling. Because of this we shouldn't program the scalers
in planar mode if NV12 and the chroma upsampler are used. Instead
program the scalers like on normal planes.
Sprite 2 and 3 have no dedicated scaler, and need to program the
selected Y plane in the scaler mode.
Changes since v1:
- Make the comment less confusing.
Changes since v2:
- Fix checkpatch warning (Matt)
- gen10- -> Pre-gen11 (Ville)
- PS_SCALER_MODE_PACKED -> PS_SCALER_MODE_NORMAL. (Matt)
- Add comment about scaler mode in intel_atomic_setup_scaler(). (Matt)
- Rename need_scaling to need_scaler. (Matt)
- Move the crtc need_scaling check to skl_update_scaler_crtc().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-6-maarten.lankhorst@linux.intel.com
|
|
The way our hardware is designed doesn't seem to let us use the
MI_RECORD_PERF_COUNT command without setting up a circular buffer.
In the case where the user didn't request OA reports to be available
through the i915 perf stream, we can set the OA buffer to the minimum
size to avoid consuming memory which won't be used by the driver.
v2: Simplify oa buffer size exponent selection (Chris)
Reuse vma size field (Lionel)
v3: Restrict size opening parameter to values supported by HW (Chris)
v4: Drop out of date comment (Matt)
Add debug message when buffer size is rejected (Matt)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-5-lionel.g.landwerlin@intel.com
|
|
This patch defines DSI_CMD_RXCTL, DSI_CMD_TXCTL registers,
bitfields, masks and macros used for configuring DSI panel.
v2: Define remaining bitfields
v3 by Jani:
- Alignment fix
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/37b41fe08ce50c3d9ef7d55c03d12a8a10a252d6.1539613303.git.jani.nikula@intel.com
|
|
This patch defines TRANS_CONF registers for DSI ports
0 and 1. Bitfields of these registers used for enabling
and reading the current state of transcoder.
v2: Add blank line before comment
v3 by Jani:
- Move DSI specific .pipe_offsets to GEN11_FEATURES
- Macro placement and comment juggling
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com
|