summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/i915_suspend.c
AgeCommit message (Collapse)Author
2017-09-29drm/i915: Move i915_gem_restore_fences to i915_gem_resumeSagar Arun Kamble
i915_gem_restore_fences is GEM resumption task hence it is moved to i915_gem_resume from i915_restore_state. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1506661116-12106-1-git-send-email-sagar.a.kamble@intel.com Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-12-01drm/i915: Make i915_save/restore_state and intel_i2c_reset take dev_privTvrtko Ursulin
dev_priv is more appropriate since it is used much more in these. v2: Commit message and keep the local pdev variable. (Joonas Lahtinen) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-11-17drm/i915: dev_priv cleanup in i915_suspend.cTvrtko Ursulin
And a little bit of function prototype changes. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-11-17drm/i915: Use dev_priv in INTEL_INFO in i915_gem_fence_reg.cTvrtko Ursulin
Plus a small cascade of function prototype changes. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-10-14drm/i915: Make IS_GEN macros only take dev_privTvrtko Ursulin
Saves 1416 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476352990-2504-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-10-14drm/i915: Make IS_G4X only take dev_privTvrtko Ursulin
Saves 472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-08-22drm/i915: pdev cleanupDavid Weinehall
In an effort to simplify things for a future push of dev_priv instead of dev wherever possible, always take pdev via dev_priv where feasible, eliminating the direct access from dev. Right now this only eliminates a few cases of dev, but it also obviates that we pass dev into a lot of functions where dev_priv would be the more obvious choice. v2: Fixed one more place missing in the previous patch set Signed-off-by: David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-5-david.weinehall@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-08-10drm/i915: Remove LVDS and PPS suspend time save/restoreImre Deak
In the preceding patches we made sure that: - the LVDS encoder takes care of reiniting both the LVDS register and its PPS - the eDP encoder takes care of reiniting its PPS - the PPS register unlocking workaround is applied explicitly whenever the PPS context is lost Based on the above we can safely remove the opaque LVDS and PPS save / restore from generic code. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-6-git-send-email-imre.deak@intel.com
2016-08-10drm/i915: Merge the PPS register definitionsImre Deak
The PPS registers are pretty much the same everywhere, the differences being: - Register fields appearing, disappearing from one platform to the next: panel-reset-on-powerdown, backlight-on, panel-port, register-unlock - Different register base addresses - Different number of PPS instances: 2 on VLV/CHV/BXT, 1 everywhere else. We can merge the separate set of PPS definitions by extending the PPS instance argument to all platforms and using instance 0 on platforms with a single instance. This means we'll need to calculate the register addresses dynamically based on the given platform and PPS instance. v2: - Simplify if ladder in intel_pps_get_registers(). (Ville) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-1-git-send-email-imre.deak@intel.com
2016-07-04drm/i915: Mass convert dev->dev_private to to_i915(dev)Chris Wilson
Since we now subclass struct drm_device, we can save pointer dances by noting the equivalence of struct drm_device and struct drm_i915_private, i.e. by using to_i915(). text data bss dec hex filename 1073824 4562 416 1078802 107612 drivers/gpu/drm/i915/i915.ko 1068976 4562 416 1073954 106322 drivers/gpu/drm/i915/i915.ko Created by the coccinelle script: @@ expression E; identifier p; @@ - struct drm_i915_private *p = E->dev_private; + struct drm_i915_private *p = to_i915(E); Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk
2016-02-02drm/i915/bxt: Don't save/restore eDP panel power during suspend (v3)Matt Roper
Our attempts save/restore panel power state in i915_suspend.c are causing unclaimed register warnings on BXT since the registers for this platform differ from older platforms. The big hammer suspend/resume shouldn't be necessary for PP since the connector/encoder hooks should already handle this. In theory we could remove this for all platforms, but in practice it's likely that would cause some regressions since older platforms with LVDS may have incomplete PP handling. For now we'll leave the PCH save/restore alone and change the non-PCH branch to only operate on gen <= 4 so that BXT and future platforms aren't included. v2: Typo fix: s/||/&&/ v3: Change non-PCH condition to a gen <= 4 test rather than listing VLV/CHV/BXT as specific platforms to exclude; should be more future-proof as we add new platforms. (Daniel) Cc: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452102821-17190-1-git-send-email-matthew.d.roper@intel.com
2016-01-29drm/i915/fbc: rename the FBC disable functionsPaulo Zanoni
Instead of: - intel_fbc_disable_crtc(crtc) - intel_fbc_disable(dev_priv) we now have: - intel_fbc_disable(crtc) - intel_fbc_global_disable(dev_priv) This is because all the other functions that take a CRTC are called - intel_fbc_something(crtc) Instead of: - intel_fbc_something_crtc(crtc) And I also hope that the word "global" is going to help make it more explicit that "global" is the unusual case, not the opposite. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453210558-7875-14-git-send-email-paulo.r.zanoni@intel.com
2015-12-10drm/i915: Separate cherryview from valleyviewWayne Boyer
The cherryview device shares many characteristics with the valleyview device. When support was added to the driver for cherryview, the corresponding device info structure included .is_valleyview = 1. This is not correct and leads to some confusion. This patch changes .is_valleyview to .is_cherryview in the cherryview device info structure and simplifies the IS_CHERRYVIEW macro. Then where appropriate, instances of IS_VALLEYVIEW are replaced with IS_VALLEYVIEW || IS_CHERRYVIEW or equivalent. v2: Use IS_VALLEYVIEW || IS_CHERRYVIEW instead of defining a new macro. Also add followup patches to fix issues discovered during the first review. (Ville) v3: Fix some style issues and one gen check. Remove CRT related changes as CRT is not supported on CHV. (Imre, Ville) v4: Make a few more optimizations. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Wayne Boyer <wayne.boyer@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449692975-14803-1-git-send-email-wayne.boyer@intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
2015-10-13drm/i915: Parametrize and fix SWF registersVille Syrjälä
Parametrize the SWF registers. This also fixes the register offsets, which were mostly garbage in the old defines. Also save/restore only as many SWF registers that each platform has. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-08drm/i915: use dev_priv for the FBC functionsPaulo Zanoni
Because the cool kids use dev_priv and FBC wants to be cool too. We've been historically using struct drm_device on the FBC function arguments, but we only really need it for intel_vgpu_active(): we can use dev_priv everywhere else. So let's fully switch to dev_priv since I'm getting tired of adding "struct drm_device *dev = dev_priv->dev" everywhere. If I get a NACK here I'll propose the opposite: convert all the functions that currently take dev_priv to take dev. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27drm/i915: Remove regfile code&data for UMS suspend/resumeDaniel Vetter
Lots of lines to remove! Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [danvet: Fixup makefile.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-10Merge tag 'drm-intel-next-2014-12-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next - plane handling refactoring from Matt Roper and Gustavo Padovan in prep for atomic updates - fixes and more patches for the seqno to request transformation from John - docbook for fbc from Rodrigo - prep work for dual-link dsi from Gaurav Signh - crc fixes from Ville - special ggtt views infrastructure from Tvrtko Ursulin - shadow patch copying for the cmd parser from Brad Volkin - execlist and full ppgtt by default on gen8, for testing for now * tag 'drm-intel-next-2014-12-19' of git://anongit.freedesktop.org/drm-intel: (131 commits) drm/i915: Update DRIVER_DATE to 20141219 drm/i915: Hold runtime PM during plane commit drm/i915: Organize bind_vma funcs drm/i915: Organize INSTDONE report for future. drm/i915: Organize PDP regs report for future. drm/i915: Organize PPGTT init drm/i915: Organize Fence registers for future enablement. drm/i915: tame the chattermouth (v2) drm/i915: Warn about missing context state workarounds only once drm/i915: Use true PPGTT in Gen8+ when execlists are enabled drm/i915: Skip gunit save/restore for cherryview drm/i915/chv: Use timeout mode for RC6 on chv drm/i915: Add GPGPU_THREADS_DISPATCHED to the register whitelist drm/i915: Tidy up execbuffer command parsing code drm/i915: Mark shadow batch buffers as purgeable drm/i915: Use batch length instead of object size in command parser drm/i915: Use batch pools with the command parser drm/i915: Implement a framework for batch buffer pools drm/i915: fix use after free during eDP encoder destroying drm/i915/skl: Skylake also supports DP MST ...
2014-12-11drm/i915: save/restore GMBUS freq across suspend/resume on gen4Jesse Barnes
Should probably just init this in the GMbus code all the time, based on the cdclk and HPLL like we do on newer platforms. Ville has code for that in a rework branch, but until then we can fix this bug fairly easily. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76301 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Nikolay <mar.kolya@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-10drm/i915: Move FBC stuff to intel_fbc.cRodrigo Vivi
No functional changes. This is just the begin of a FBC rework. v2 (Paulo): - Revert intel_fbc_init() changed parameter. - Revert set_no_fbc_reason() rename. - Rebase. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: unify remaining register save/restore code a bitJani Nikula
Use the same conditions, group by features, add comments. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: don't save/restore backlight hist ctl registersJani Nikula
This is not used within the driver, and merely saving/restoring these registers isn't going to do any good anyway. In fact, it's possible it's actively harmful. Any code enabling the feature should handle this completely in the regular platform specific enable/disable backlight functions. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: don't save/restore panel fitter registersJani Nikula
AFAICT i9xx_pfit_disable() on the GMCH display crtc disable path in i9xx_crtc_disable() will always disable the panel fitter by writing 0 to PFIT_CONTROL. The register save will always save/restore 0. Also we completely recompue both in intel_gmch_panel_fitting so there's no way we depend upon leftover bits. Move the PFIT_CONTROL and PFIT_PGM_RATIOS save/restore to UMS code. While at it, save/restore them both under the same conditions. Signed-off-by: Jani Nikula <jani.nikula@intel.com> [danvet: Make it a bit clearer that we nowhere depend upon these bits.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: restore RSTDBYCTL only on non-KMS pathsJani Nikula
Since RSTDBYCTL is only saved on non-KMS path in within i915_save_state, move the restore in i915_restore_state for symmetry. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915/vlv: don't save panel power sequencer registers on suspendJani Nikula
Don't save the panel power sequencer register on vlv/chv for two simple reasons. First, these are the wrong registers to save to begin with. Second, they are not restored anyway. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-22drm/i915: disable GT power saving early during system suspendImre Deak
Atm, we disable GT power saving during the end of the suspend sequence in i915_save_state(). Doing the disabling at that point seems arbitrary. One reason to disable it early though is to have a quiescent HW state before we do anything else (for example save registers). So move the disabling earlier, which also takes care canceling of the deferred RPS enabling work done by intel_disable_gt_powersave(). Note that after the move we'll call intel_disable_gt_powersave() only in case modeset is enabled, but that's anyway the only case where we have it enabled in the first place. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Robert Beckett <robert.beckett@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-25drm/i915: Kill most of the FBC register save/restoreVille Syrjälä
We will anyway re-enable FBC normally after resume, so trying to save and restore the register makes little sense. We do need to preserve the FBC1 interval bits in FBC_CONTROL since we only initialize them during driver load, and try to preserve them after that. v2: s/I915_HAS_FBC/HAS_FBC/ and fix the check for gen4 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-24drm/i915: Only restore backlight combination mode reg for umsDaniel Vetter
This was forgotten in commit 565ee3897f0cb1e9b09905747b3784e6605767e8 Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Nov 13 12:56:29 2013 +0200 drm/i915: do not save/restore backlight registers in KMS Since the confusion was likely due to the duplicated definition for this pci config register, let's unify that, too. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-10drm/i915: Drop I915_ prefix from HAS_FBCDaniel Vetter
My OCD just couldn't let this slide. Spotted while reviewing Ville's patch to only flip planes when we have FBC. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-14drm/i915: do not save/restore backlight registers in KMSJani Nikula
The backlight enable code now has the smarts to do the right thing. Only do backlight register save/restore in UMS. Some VLV specific code gets dropped as UMS is not supported on VLV. v2: Move save/restore to UMS instead of removing completely (Daniel). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-13drm/i915: make backlight info per-connectorJani Nikula
Move from dev_priv to connector->panel. We still don't allow multiple sysfs interfaces, though. There should be no functional changes, except for a slight reordering of connector backlight and sysfs destroy calls. (This change happens now that the backlight device is actually per-connector, even though the destroy calls became per-connector earlier.) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-06drm/i915/vlv: use per-pipe backlight controls v2Jesse Barnes
With the connector and pipe passed around, we can now set the backlight on the right pipe on VLV/BYT. v2: drop combination mode check for VLV (Jani) add save/restore code for VLV backlight regs (Jani) check for existing modulation freq when initializing backlight regs (Jani) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67245 Tested-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-11drm/i915: don't save/restore CACHE_MODE_0 on gen7+Jesse Barnes
On gen7+, CACHE_MODE_0 moved, so we're clobbering some other reg rather than restoring CACHE_MODE_0. Don't do that. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-13drm/i915: don't save/restore LBB on Gen5+Paulo Zanoni
Because this PCI config register doesn't exist on Gen5+. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-09Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Okay this is the big one, I was stalled on the fbdev pull req as I stupidly let fbdev guys merge a patch I required to fix a warning with some patches I had, they ended up merging the patch from the wrong place, but the warning should be fixed. In future I'll just take the patch myself! Outside drm: There are some snd changes for the HDMI audio interactions on haswell, they've been acked for inclusion via my tree. This relies on the wound/wait tree from Ingo which is already merged. Major changes: AMD finally released the dynamic power management code for all their GPUs from r600->present day, this is great, off by default for now but also a huge amount of code, in fact it is most of this pull request. Since it landed there has been a lot of community testing and Alex has sent a lot of fixes for any bugs found so far. I suspect radeon might now be the biggest kernel driver ever :-P p.s. radeon.dpm=1 to enable dynamic powermanagement for anyone. New drivers: Renesas r-car display unit. Other highlights: - core: GEM CMA prime support, use new w/w mutexs for TTM reservations, cursor hotspot, doc updates - dvo chips: chrontel 7010B support - i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell), Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp support (this time for sure) - nouveau: async buffer object deletion, context/register init updates, kernel vp2 engine support, GF117 support, GK110 accel support (with external nvidia ucode), context cleanups. - exynos: memory leak fixes, Add S3C64XX SoC series support, device tree updates, common clock framework support, - qxl: cursor hotspot support, multi-monitor support, suspend/resume support - mgag200: hw cursor support, g200 mode limiting - shmobile: prime support - tegra: fixes mostly I've been banging on this quite a lot due to the size of it, and it seems to okay on everything I've tested it on." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits) drm/radeon/dpm: implement vblank_too_short callback for si drm/radeon/dpm: implement vblank_too_short callback for cayman drm/radeon/dpm: implement vblank_too_short callback for btc drm/radeon/dpm: implement vblank_too_short callback for evergreen drm/radeon/dpm: implement vblank_too_short callback for 7xx drm/radeon/dpm: add checks against vblank time drm/radeon/dpm: add helper to calculate vblank time drm/radeon: remove stray line in old pm code drm/radeon/dpm: fix display_gap programming on rv7xx drm/nvc0/gr: fix gpc firmware regression drm/nouveau: fix minor thinko causing bo moves to not be async on kepler drm/radeon/dpm: implement force performance level for TN drm/radeon/dpm: implement force performance level for ON/LN drm/radeon/dpm: implement force performance level for SI drm/radeon/dpm: implement force performance level for cayman drm/radeon/dpm: implement force performance levels for 7xx/eg/btc drm/radeon/dpm: add infrastructure to force performance levels drm/radeon: fix surface setup on r1xx drm/radeon: add support for 3d perf states on older asics drm/radeon: set default clocks for SI when DPM is disabled ...
2013-06-16drm/i915: Restore fences after resume and GPU resetsChris Wilson
Stéphane Marchesin found that fences for pinned objects (i.e. the scanout) were not being restored upon resume, leading to corruption on the display and reference counting issues. This is due to a bug in commit 312817a39f17dbb4de000165b5b724e3728cd91c [2.6.38] Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Nov 22 11:50:11 2010 +0000 drm/i915: Only save and restore fences for UMS that zapped the pinned fences even though they were in use. Fortuitously, whilst we forced a VT switch during suspend and resume, no fences were ever pinned at the time. However, we now can do switchless S3 transitions and so the old bug finally surfaces. Reported-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-25drm/i915: protect backlight registers and data with a spinlockJani Nikula
Backlight data and registers are fiddled through LVDS/eDP modeset enable/disable hooks, backlight sysfs files, asle interrupts, and register save/restore. Protect the backlight related registers and driver private fields using a spinlock. The locking in register save/restore covers a little more than is strictly necessary, including non-modeset case, for simplicity. v2: Cover register access, save/restore, i915_read_blc_pwm_ctl() and code paths leading there. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-17drm/i915: don't save/restore PCH_LVDS on LPTPaulo Zanoni
Because the register does not exist on LPT. The interesting fact is that reading/writing PCH_LVDS on LPT does *not* give us "unclaimed register" messages, but the register value is always 0. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-20drm/i915: don't restore LVDS enable state blindly v2Jesse Barnes
We still rely on a few LVDS bits, but restoring the enable bit can cause trouble at this point, so don't. v2: use the right mask to prevent restore (Daniel) conditionalize on KMS support (Denial) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-31drm/i915: Introduce i915_vgacntrl_reg()Ville Syrjälä
The VGACNTRL register has moved around between different platforms. To handle the differences add i915_vgacntrl_reg() which returns the correct offset for the VGACNTRL register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-31drm/i915: move DP save/restore into i915_ums.cDaniel Vetter
Note that this slightly changes the order, but we only move it within the block of registers that restore encoder state. Specifically LVDS is now restored after DP, whereas previously it was done before. Legacy vga is still restored afterwards, which seems to be the important thing (if there's anything important in this restore ordering at all). Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-31drm/i915: dont save/restore VGA state for kmsDaniel Vetter
The only thing we really care about that it is off. To do so, reuse the recently created i915_redisable_vga function, which is already used to put obnoxious firmware into check on lid reopening. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-31drm/i915: extract ums suspend/resume into i915_ums.cDaniel Vetter
Similarly to how i915_dma.c is shaping up to be the dungeon hole for all things supporting dri1, create a new one to hide all the crazy things which are only really useful for ums support. Biggest part is the register suspend/resume support. Unfortunately a lot of it is still intermingled with bits and pieces we might still need, so needs more analysis and needs to stay in i915_suspend.c for now. Reviewed-by: Imre Deak <imre.deak@intel.com> v2: s/modeset_reg/display_reg/ as suggested by Imre, to avoid confusion between the kernel modeset code and display save/restore to support ums. v3: Fixup alphabetical order in the Makefile, spotted by Chris Wilson. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-28drm/i915: move modeset checks out of save/restore_modeset_regDaniel Vetter
That way the control flow is clearer, and it prepares the stage to extract these ums functions and hide them somewhere. There's still tons of display stuff outside of these, but that requires more work. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-24drm/i915: don't save/restore DSPARB on gen5+Paulo Zanoni
Because the register does not exist in gen5+. This patch solves "unclaimed register" messages on Haswell after suspend/resume. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: Remove save/restore of physical HWS_PGA registerChris Wilson
Now that we always restore the HWS registers (both physical and GTT virtual addresses) when re-initialising the rings, we can eliminate the superfluous save/restore of the register across suspend and resume. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-11drm/i915: move the suspend/resume register file out of dev_privDaniel Vetter
dev_priv has grown way too big, and grouping memebers into substructs and moving them out of line helps re-gain some overview. Unfortunatley I couldn't just call the substruct save and drop the prefix, since that will make most member names clash with registers #defines. Changes in i915_drv.h done by hand, everything else changed with s/\<save\([A-Z]*\)/regfile.save\1/ in vim. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22Merge tag 'v3.7-rc2' into drm-intel-next-queuedDaniel Vetter
Linux 3.7-rc2 Backmerge to solve two ugly conflicts: - uapi. We've already added new ioctl definitions for -next. Do I need to say more? - wc support gtt ptes. We've had to revert this for snb+ for 3.7 and also fix a few other things in the code. Now we know how to make it work on snb+, but to avoid losing the other fixes do the backmerge first before re-enabling wc gtt ptes on snb+. And a few other minor things, among them git getting confused in intel_dp.c and seemingly causing a conflict out of nothing ... Conflicts: drivers/gpu/drm/i915/i915_reg.h drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_dp.c drivers/gpu/drm/i915/intel_modes.c include/drm/i915_drm.h Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-18drm/i915: don't save/restor ADPA for kmsDaniel Vetter
We now no longer rely on this. This is step 1 on a long journey to rid us of the save/restore madness, which tends to lightly paper over many issues, and cause tons of bad things itself ... Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: satisfy Paulo's ocd and drop the needless braces.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-17drm/i915: don't save/restore HWS_PGA reg for kmsDaniel Vetter
We already do that as part of the ringbuffer re-setup at resume time. Furthermore the register offset has moved on gen6+ around quite a bit, and on ilk/gm45 we also need to restore the HWS reg for the bsd ring, not just the render ring. So again in kms mode this is only confusing a best, hence don't bother. v2: Fixup logic, noticed by Paulo Zanoni. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-17drm/i915: don't save/restore irq regs for kmsDaniel Vetter
We already call drm_irq_install/uninstall at the right time, which will set up the irq registers with the correct values (through the preinstall hooks). For kms this is at best harmless, in the worst case we get an interrupt when we don't really expect it. v2: Fixup the logic, noticed by Paulo Zanoni. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit (git 2.34.1) at 2024-06-14 05:28:50 +0000