summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_pm.c
AgeCommit message (Collapse)Author
2021-04-12drm/i915: Don't zero out the Y plane's watermarksVille Syrjälä
Don't zero out the watermarks for the Y plane since we've already computed them when computing the UV plane's watermarks (since the UV plane always appears before ethe Y plane when iterating through the planes). This leads to allocating no DDB for the Y plane since .min_ddb_alloc also gets zeroed. And that of course leads to underruns when scanning out planar formats. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: dbf71381d733 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210327005945.4929-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (cherry picked from commit f99b805fb9413ff007ca0b6add871737664117dd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-03-17drm/i915: Workaround async flip + VT-d corruption on HSW/BDWVille Syrjälä
On HSW/BDW with VT-d active the first tile row scanned out after the first async flip of the frame often ends up corrupted. Whether the corruption happens or not depends on the scanline on which the async flip happens, but the behaviour seems very consistent. Ie. the same set of scanlines (which are most scanlines) always show the corruption. And another set of scanlines (far less of them) never shows the corruption. I discovered that disabling the fetch-stride stretching feature cures the corruption. This is some kind of TLB related prefetch thing AFAIK. We already disable it on SNB primary planes due to a documented workaround. The hardware folks indicated that disabling this should be fine, so let's go with that. And while we're here, let's document the relevant bits on all pre-skl platforms. Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com> (cherry picked from commit b7a7053ab2ec558b8ae4e55f62ea8f1f58e14f5c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-29drm/i915: Rename is_16gb_dimm to wm_lv_0_adjust_neededJosé Roberto de Souza
As it now it is always required for GEN12+ the is_16gb_dimm name do not make sense for GEN12+. v2: - Updated comment on top of "dram_info->wm_lv_0_adjust_needed = !IS_GEN9_LP(i915);" Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128164312.91160-3-jose.souza@intel.com
2021-01-26drm/i915: Do a bit more initial readout for dbufVille Syrjälä
Readout the dbuf related stuff during driver init/resume and stick it into our dbuf state. v2: Keep crtc_state->wm.skl.ddb Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-9-ville.syrjala@linux.intel.com
2021-01-26drm/i915: Encapsulate dbuf state handling harderVille Syrjälä
In order to make the dbuf state computation less fragile let's make it stand on its own feet by not requiring someone to peek into a crystall ball ahead of time to figure out which pipes need to be added to the state under which potential future conditions. Instead we compute each piece of the state as we go along, and if any fallout occurs that affects more than the current set of pipes we add the affected pipes to the state naturally. That requires that we track a few extra thigns in the global dbuf state: dbuf slices for each pipe, and the weight each pipe has when distributing the same set of slice(s) between multiple pipes. Easy enough. We do need to follow a somewhat careful sequence of computations though as there are several steps involved in cooking up the dbuf state. Thoguh we could avoid some of that by computing more things on demand instead of relying on earlier step of the algorithm to have filled it out. I think the end result is still reasonable as the entire sequence is pretty much consolidated into a single function instead of being spread around all over. The rough sequence is this: 1. calculate active_pipes 2. calculate dbuf slices for every pipe 3. calculate total enabled slices 4. calculate new dbuf weights for any crtc in the state 5. calculate new ddb entry for every pipe based on the sets of slices and weights, and add any affected crtc to the state 6. calculate new plane ddb entries for all crtcs in the state, and add any affected plane to the state so that we'll perform the requisite hw reprogramming And as a nice bonus we get to throw dev_priv->wm.distrust_bios_wm out the window. v2: Keep crtc_state->wm.skl.ddb Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-8-ville.syrjala@linux.intel.com
2021-01-26drm/i915: Extract intel_crtc_dbuf_weights()Ville Syrjälä
Extract the code to calculate the weights used to chunk up the dbuf between pipes. There's still extra stuff in there that shouldn't be there and must be moved out, but that requires a bit more state to be tracked in the dbuf state. v2: Keep crtc_state->wm.skl.ddb Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-7-ville.syrjala@linux.intel.com
2021-01-26drm/i915: Add pipe ddb entries into the dbuf stateVille Syrjälä
The dbuf state will be where we collect all the inter-pipe dbuf allocation stuff. Start by adding the actual per-pipe ddb entries there. Originally the plan was to move them there outright, but that no longer works as we're no longer guaranteed to have a dbuf state when it comes time to sanity check the ddb overlaps in skl_commit_modeset_enables(). I think when I wrote this originally we did the watermark/ddb calculation last, and so we couldn't have any crtcs in the state w/o also having the dbuf state. But that has since changed and we do the watermark/ddb calculation much earlier, and thus it is now possible to commit crtcs w/o a dbuf state. So we keep another copy of the information in the crtc state. v2: Rebase v3: Duplicate the entries instead of moving Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-6-ville.syrjala@linux.intel.com
2021-01-26drm/i915: Introduce skl_ddb_entry_for_slices()Ville Syrjälä
Generalize icl_get_first_dbuf_slice_offset() into something that just gives us the start+end of the dbuf chunk covered by the specified slices as a standard ddb entry. Initial idea was to use it during readout as well, but we shall see. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-5-ville.syrjala@linux.intel.com
2021-01-26drm/i915: Introduce intel_dbuf_slice_size()Ville Syrjälä
Put the code into a function with a descriptive name. Also relocate the code a bit help future work. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-4-ville.syrjala@linux.intel.com
2021-01-26drm/i915: Pass the crtc to skl_compute_dbuf_slices()Ville Syrjälä
skl_compute_dbuf_slices() has no use for the crtc state, so just pass the crtc itself. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-3-ville.syrjala@linux.intel.com
2021-01-26drm/i915: Extract intel_crtc_ddb_weight()Ville Syrjälä
skl_ddb_get_pipe_allocation_limits() doesn't care how the weights for distributing the ddb are caclculated for each pipe. Put that calculation into a separate function so that such mundane details are hidden from view. v2: s/adjusted_mode/pipe_mode/ Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210122205633.18492-2-ville.syrjala@linux.intel.com
2021-01-14drm/i915/dg1: Apply WA 1409120013 and 14011059788José Roberto de Souza
DG1 is missing those two WA so instead of copy and paste it to the DG1 function, here calling the function that implements it. While at it also renaming tgl_init_clock_gating to gen12lp_init_clock_gating as it is also used by DG1, RKL and ADL-S. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210113133759.72055-1-jose.souza@intel.com
2021-01-07Merge tag 'drm-intel-next-2021-01-04' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Display hotplug fix for gen2/gen3 (Chris) - Remove trailing semicolon (Tom) - Suppress display warnings for old ifwi presend on our CI (Chris) - OA/Perf related workaround (Lionel) - Replace I915_READ/WRITE per new uncore and display read/write functions (Jani) - PSR improvements (Jose) - HDR and other color changes on LSPCON (Uma, Ville) - FBC fixes for TGL (Uma) - Record plane update times for debugging (Chris) - Refactor panel backlight control functions (Dave) - Display power improvements (Imre) - Add VRR register definition (Manasi) - Atomic modeset improvements for bigjoiner pipes (Ville) - Switch off the scanout during driver unregister (Chris) - Clean-up DP's FEW enable (Manasi) - Fix VDSCP slice count (Manasi) - Fix and clean up around rc_model_size for DSC (Jani) - Remove Type-C noisy debug warn message (Sean) - Display HPD code clean-up (Ville) - Refactor Intel Display (Dave) - Start adding support for Intel's eDP backlight controls (Lyude) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104211018.GA1094707@intel.com
2020-12-03Merge tag 'drm-intel-next-queued-2020-11-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v5.11: Highlights: - Enable big joiner to join two pipes to one port to overcome pipe restrictions (Manasi, Ville, Maarten) Display: - More DG1 enabling (Lucas, Aditya) - Fixes to cases without display (Lucas, José, Jani) - Initial PSR state improvements (José) - JSL eDP vswing updates (Tejas) - Handle EDID declared max 16 bpc (Ville) - Display refactoring (Ville) Other: - GVT features - Backmerge Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87czzzkk1s.fsf@intel.com
2020-12-01drm/i915/pm: replace I915_READ()/WRITE() with intel_uncore_read()/write()Jani Nikula
Arguably some of these should use intel_de_read() or intel_de_write(), however not all. Prioritize I915_READ() and I915_WRITE() removal in general over migrating to the pedantically correct replacements right away. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-7-jani.nikula@intel.com
2020-11-16drm/i915: Remove skl_adjusted_plane_pixel_rate()Ville Syrjälä
Replace skl_adjusted_plane_pixel_rate() with the generic intel_plane_pixel_rate(). The two should produce identical results. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-7-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2020-11-16drm/i915: Store plane relative data rate in crtc_stateVille Syrjälä
Store the relative data rate for planes in the crtc state so that we don't have to use intel_atomic_crtc_state_for_each_plane_state() to compute it even for the planes that are no part of the current state. Should probably just nuke this stuff entirely an use the normal plane data rate instead. The two are slightly different since this relative data rate doesn't factor in the actual pixel clock, so it's a bit odd thing to even call a "data rate". And since the watermarks are computed based on the actual data rate anyway I don't really see what the point of this relative data rate is. But that's for the future... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-6-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2020-11-16drm/i915: Precompute can_sagv for each wm levelVille Syrjälä
In order to remove intel_atomic_crtc_state_for_each_plane_state() from skl_crtc_can_enable_sagv() we can simply precompute whether each wm level can tolerate the SAGV block time latency or not. This has the nice side benefit that we remove the duplicated wm level latency calculation. In fact the copy of that code we had in skl_crtc_can_enable_sagv() didn't even handle WaIncreaseLatencyIPCEnabled/Display WA #1141 whereas the copy in skl_compute_plane_wm() did. So now we just have the one copy which handles all the w/as. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-5-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2020-11-15drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm codeVille Syrjälä
intel_atomic_crtc_state_for_each_plane_state() peeks at the plane's current state without holding the plane's mutex, trusting that the crtc's mutex will protect it. In practice that does work since our planes can't move between pipes, but it sets a bad example. intel_atomic_crtc_state_for_each_plane_state() also relies on crtc_state.uapi.plane_mask which may be full of lies when it comes to the bigjoiner stuff, so soon we can't use it as is anyway. So best to just get rid of it entirely. Which we can easily do by switching to the g4x/vlv "raw" watermark approach. Later on we should even be able to move the "raw" watermark computation into the normal .plane_check() code, leaving only the merging/clamping of the final watermarks to the later stages. But that will require adjusting the ilk+ wm code similarly as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-3-ville.syrjala@linux.intel.com
2020-11-15drm/i915: Pass intel_atomic_state aroundVille Syrjälä
Pass the whole intel_atomic_state to skl_build_pipe_wm() and skl_allocate_pipe_ddb() so we can start to iterate stuff containerd in the commit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106173042.7534-2-ville.syrjala@linux.intel.com
2020-11-13drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder splitMaarten Lankhorst
With bigjoiner, there will be 2 pipes driving 2 halves of 1 transcoder, because of this, we need a pipe_mode for various calculations, including for example watermarks, plane clipping, etc. v10: * remove redundant pipe_mode assignment (Ville) v9: * pipe_mode in state dump nd state check (Ville) v8: * Add pipe_mode in readout in verify_crtc_state (Ville) v7: * Remove redundant comment (Ville) * Just keep mode instead of pipe_mode (Ville) v6: * renaming in separate function, only pipe_mode here (Ville) * Add description (Maarten) v5: * Rebase (Manasi) v4: * Manual rebase (Manasi) v3: * Change state to crtc_state, fix rebase err (Manasi) v2: * Manual Rebase (Manasi) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> [vsyrjala: * Fix state checker * Fix state dump * Use pipe_mode for linetime watermarks * Make sure pipe_mode normal timings are correct since the silly ddb code uses them * Drop the redundant pipe_mode copies from intel_modeset_pipe_config() and intel_crtc_copy_uapi_to_hw_state() * Use drm_mode_copy() all over] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-7-ville.syrjala@linux.intel.com
2020-11-13Merge tag 'drm-intel-gt-next-2020-11-12-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - DMA mapped scatterlist fixes in i915 to unblock merging of https://lkml.org/lkml/2020/9/27/70 (Tvrtko, Tom) Driver Changes: - Fix for user reported issue #2381 (Graphical output stops with "switching to inteldrmfb from simple"): Mark ininitial fb obj as WT on eLLC machines to avoid rcu lockup during fbdev init (Ville, Chris) - Fix for Tigerlake (and earlier) to avoid spurious empty CSB events leading to hang (Chris, Bruce) - Delay execlist processing for Tigerlake to avoid hang (Chris) - Fix for Tigerlake RCS engine health check through heartbeat (Chris) - Fix for Tigerlake reserved MOCS entries (Ayaz, Chris) - Fix Media power gate sequence on Tigerlake (Rodrigo) - Enable eLLC caching of display buffers for SKL+ (Ville) - Support parsing of oversize batches on Gen9 (Matt, Chris) - Exclude low pages (128KiB) of stolen from use to avoid thrashing during reset (Chris) - Flush engines before Tigerlake breadcrumbs (Chris) - Use the local HWSP offset during submission (Chris) - Flush coherency domains on first set-domain-ioctl (Chris, Zbigniew) - Use the active reference on the vma while capturing to avoid use-after-free (Chris) - Fix MOCS PTE setting for gen9+ (Ville) - Avoid NULL dereference on IPS driver callback while unbinding i915 (Chris) - Avoid NULL dereference from PT/PD stash allocation error (Matt) - Hold request reference for canceling an active context (Chris) - Avoid infinite loop on x86-32 when mapping a lot of objects (Chris) - Disallow WC mappings when processor doesn't support them (Chris) - Return correct error in i915_gem_object_copy_blt() error path (Dan) - Return correct error in intel_context_create_request() error path (Maarten) - Tune down GuC communication enabled/disabled messages to debug (Jani) - Fix rebased commit "Remove i915_request.lock requirement for execution callbacks" (Chris) - Cancel outstanding work after disabling heartbeats on an engine (Chris) - Signal cancelled requests (Chris) - Retire cancelled requests on unload (Chris) - Scrub HW state on driver remove (Chris) - Undo forced context restores after trivial preemptions (Chris) - Handle PCI unbind in PMU code (Tvrtko) - Fix CPU hotplug with multiple GPUs in PMU code (Trtkko) - Correctly set SFC capability for video engines (Venkata) - Update GuC code to use firmware v49.0.1 (John, Matthew B., Daniele, Oscar, Michel, Rodrigo, Michal) - Improve GuC warnings on loading failure (John) - Avoid ownership race in buffer pool by clearing age (Chris) - Use MMIO to read CSB in case of failure (Chris, Mika) - Show engine properties in engine state dump to indicate changes (Chris, Joonas) - Break up error capture compression loops with cond_resched() (Chris) - Reduce GPU error capture mutex hold time to avoid khungtaskd (Chris) - Serialise debugfs i915_gem_objects with ctx->mutex (Chris) - Always test execution status on closing the context and close if not persistent (Chris) - Avoid mixing integer types during batch copies (Chris, Jared) - Skip over MI_NOOP when parsing to avoid overhead (Chris) - Hold onto an explicit ref to i915_vma_work.pinned (Chris) - Perform all asynchronous waits prior to marking payload start (Chris) - Pull phys pread/pwrite implementations to the backend (Matt) - Improve record of hung engines in error state (Tvrtko) - Allow backends to override pread implementation (Matt) - Reinforce LRC poisoning checks to confirm context survives execution (Chris) - Fix memory region max size calculation (Matt) - Fix order when adding blocks to memory region (Matt) - Eliminate unused intel_virtual_engine_get_sibling func (Chris) - Cleanup kasan warning for on-stack (unsigned long) casting (Chris) - Onion unwind for scratch page allocation failure (Chris) - Poison stolen pages before use (Chris) - Selftest improvements (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201112163407.GA20320@jlahtine-mobl.ger.corp.intel.com
2020-11-11drm/i915/tgl: Fix Media power gate sequence.Rodrigo Vivi
Some media power gates are disabled by default. commit 5d86923060fc ("drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating") tried to enable it, but it duplicated an existent register. So, the main PG setup sequences ended up overwriting it. So, let's now merge this to the main PG setup sequence. v2: (Chris): s/BIT/REG_BIT, remove useless comment, remove useless =0, use the right gt, remove rc6 sequence doubt from commit message. Fixes: 5d86923060fc ("drm/i915/tgl: Enable VD HCP/MFX sub-pipe power gating") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: stable@vger.kernel.org#v5.5+ Cc: Dale B Stimson <dale.b.stimson@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201111072859.1186070-1-rodrigo.vivi@intel.com
2020-10-29drm/i915: Use _MMIO_PIPE3() for ilk+ WM0_PIPE registersVille Syrjälä
Remove the hand rolled array of WM0_PIPE register offsets and use the standard _MMIO_PIPE3() instead. v2: Take care of gvt too Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212211738.27770-1-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2020-10-16drm/i915: Apply WAC6entrylatency to kbl/cflVille Syrjälä
WAC6entrylatency is trying to fix excessive rc6 entry latency caused by the extra delay from FBC_LLC_READ_CTRL, which is there for some extra sync with uncore for frame buffer caching in LLC. Reading through the hsd the recommendation was to set the FBC_LLC_FULLY_OPEN bit to disable this extra delay entirely. This can be done whenever fb LLC caching is not used. The alternative suggestion was to reduce the delay to eg. 0x5 via updated BIOS programming instructions. But all the kbl/cfl machines I've seen still have the default 0xff programmed. As we never use fb LLC caching let's just apply the w/a to all skl derivatives to get consistent rc6 latencies. I was able to measure the effect of FBC_LLC_READ_CTRL to rc6 latency via forcewake. Here's a graph of some of the results: sleep;fw_req=1;wait fw_ack==1;sleep;fw_req=0;wait fw_ack==0 fw_ack==1 duration 160us +----------------------------------------------------------------+ | + + $$+ + + | | $$ $ $ ******$$ ** $ $**$* #########$$######| 140us |-$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$*$$$$$$$$$$$$$$$$ $$$$$$| | $ * # | | $ * # | 120us |$+ * # +-| |$ * # | |$ * # # | 100us |$+ ************######################## +-| |$ * *# | |$ ***** ######### | 80us |$+ * # #### ## +-| |$ **** ### # # | | ** #### FBC_LLC_READ_CTRL: 0x8000 ******* | 60us |-###### FBC_LLC_READ_CTRL: 0xffff #######-| |## + + FBC_LLC_READ_CTRL: 0x400000ff $$$$$$$ | +----------------------------------------------------------------+ 0ms 10ms 20ms 30ms 40ms 50ms 60ms sleep duration The default FBC_LLC_READ_CTRL value of 0xff is documented to give us a 170usec delay. That tracks well with the knees at 0xffff->~44msec and 0x8000->~22msec we see in the graph. We can see that if we sleep longer than the FBC_LLC_READ_CTRL delay we always observe the full (~145usec) rc6 wakeup latency. But if we sleep for less than the FBC_LLC_READ_CTRL delay we see a quicker fw wakeup, presumably due the hardware not having yet entered rc6 fully. The other plateaus in the graph I suspect correspond to some shallower internal rc states. v2: s/usec/msec/ typo in commit msg Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716190426.17047-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2020-10-15drm/i915/dg1: Add initial DG1 workaroundsStuart Summers
DG1 shares some workarounds with TGL and RKL and also has some additional workarounds of its own. v2: Correct location of Wa_1408615072 (JohnH). v3: Apply WAs 1606700617, 18011464164 and 22010931296 to DG1 (José) v4 (Anusha) - Add Wa_22010271021 - s/Wa_14010096844/Wa_1409836686 v5: - Extend Wa_14010919138 to all revs (Matt Atwood) - Power gate media is global gen12 design. (Rodrigo) - Rebase (Lucas) v6: use REG_BIT() to fix checkpatch warning (Lucas) BSpec: 53508 Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201014191937.1266226-8-lucas.demarchi@intel.com
2020-09-28drm/i915: Make intel_{enable,disable}_sagv() staticVille Syrjälä
intel_{enable,disable}_sagv() are no longer needed outside the compilation unit. Make them static. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200925121749.708-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-08-28drm/i915/tgl: Fix stepping WA matchingJosé Roberto de Souza
TGL made stepping a litte mess, workarounds refer to the stepping of the IP(GT or Display) not of the GPU stepping so it would already require the same solution as used in commit 96c5a15f9f39 ("drm/i915/kbl: Fix revision ID checks"). But to make things even more messy it have a different IP stepping mapping between SKUs and the same stepping revision of GT do not match the same HW between TGL U/Y and regular TGL. So it was required to have 2 different macros to check GT WAs while for Display we are able to use just one macro that uses the right revids table. All TGL workarounds checked and updated accordingly. v2: - removed TODO to check if WA 14010919138 applies to regular TGL. - fixed display stepping in regular TGL (Anusha) BSpec: 52890 BSpec: 55378 BSpec: 44455 Reviewed-by: Anusha Srivatsa <anusha.srivtsa@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Penne Lee <penne.y.lee@intel.com> Cc: Guangyao Bai <guangyao.bai@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200827233943.400946-1-jose.souza@intel.com
2020-08-17drm/i915/kbl: Fix revision ID checksMatt Roper
We usually assume that increasing PCI device revision ID's translates to newer steppings; macros like IS_KBL_REVID() that we use rely on this behavior. Unfortunately this turns out to not be true on KBL; the newer device 2 revision ID's sometimes go backward to older steppings. The situation is further complicated by different GT and display steppings associated with each revision ID. Let's work around this by providing a table to map the revision ID to specific GT and display steppings, and then perform our comparisons on the mapped values. v2: - Move the kbl_revids[] array to intel_workarounds.c to avoid compiler warnings about an unused variable in files that don't call the macros (kernel test robot). Bspec: 18329 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200811032105.2819370-1-matthew.d.roper@intel.com Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-08-17drm/i915: Move WaDisableDopClockGating:skl to skl_init_clock_gating()Ville Syrjälä
It's silly to have if(SKL) checks in gen9_init_clock_gating() when we can just move those bits into skl_init_clock_gating(). I'm not entirely convinced we even need this w/a, or if we do then maybe we want it for kbl/cfl as well. IIRC it was only listed in the wadb, but that is now dead so can't double check anymore. Bspec doesn't seem to have any purely skl specific DOP clock gating workarounds listed. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716190426.17047-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-09drm/i915: Document FBC related w/as more thoroughlyVille Syrjälä
Pimp the comments for the FBC related workarounds. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708131223.9519-4-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-09drm/i915: Limit WaFbcHighMemBwCorruptionAvoidance to skl and bxtVille Syrjälä
Supposedly only skl/bxt need WaFbcHighMemBwCorruptionAvoidance. Do not apply to the other gen9 platforms. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708131223.9519-3-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-09drm/i915: Don't do WaFbcTurnOffFbcWatermark for glkVille Syrjälä
GLK supposedly does not need WaFbcTurnOffFbcWatermark, so let's not apply it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708131223.9519-2-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-09drm/i915: Move all FBC w/as to .init_clock_gating()Ville Syrjälä
Some platforms apply the FBC w/as in .init_clock_gating(), some in fbc_activate(). Move them all to .init_clock_gating() for consistentce. Also safer since we don't have to worry about the RMWs clashing with any other runtime use of the same registers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708131223.9519-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-08drm/i915: Use the gt in HAS_ENGINEDaniele Ceraolo Spurio
A follow up patch will move the engine mask under the gt structure, so get ready for that. v2: switch the remaining gvt case using dev_priv->gt to gvt->gt (Chris) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-3-daniele.ceraolospurio@intel.com
2020-07-03drm/i915/fbc: Allow FBC to recompress after a 3D workload on i85x/i865Ville Syrjälä
Normally i85x/i865 3D activity will block FBC until a 2D blit occurs. I suppose this was meant to avoid recompression while 3D activity is still going on but the frame hasn't yet been presented. Unfortunately that also means that a page flipped 3D workload will permanently block FBC even if it only renders a single frame and then does nothing. Since we are using software render tracking anyway we might as well flip the chicken bit so that 3D does not block FBC. This will avoid the permament FBC blockage in the aforemention use case, but thanks to the software tracking the compressor will not disturb 3D rendering activity. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-5-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-01drm/i915: Fix g4x fbc watermark enableVille Syrjälä
'level' here means the highest level we can't use, so when checking the fbc watermarks we need a -1 to get at the last enabled level. While at if refactor the code a bit to declutter g4x_compute_pipe_wm(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-12-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-11drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workaroundsChris Wilson
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-6-chris@chris-wilson.co.uk
2020-06-11drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workaroundsChris Wilson
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-5-chris@chris-wilson.co.uk
2020-06-11drm/i915/gt: Move snb GT workarounds from init_clock_gating to workaroundsChris Wilson
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-4-chris@chris-wilson.co.uk
2020-06-11drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workaroundsChris Wilson
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-3-chris@chris-wilson.co.uk
2020-06-11drm/i915/gt: Move ivb GT workarounds from init_clock_gating to workaroundsChris Wilson
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611080140.30228-2-chris@chris-wilson.co.uk
2020-06-11drm/i915/gt: Move hsw GT workarounds from init_clock_gating to workaroundsChris Wilson
Rescue the GT workarounds from being buried inside init_clock_gating so that we remember to apply them after a GT reset, and that they are included in our verification that the workarounds are applied. v2: Leave HSW_SCRATCH to set an explicit value, not or in our disable bit. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2011 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200611093015.11370-1-chris@chris-wilson.co.uk
2020-06-02drm/i915: Identify Cometlake platformChris Wilson
Cometlake is a small refresh of Coffeelake, but since we have found out a difference in the plaforms, we need to identify them as separate platforms. Since we previously took Coffeelake/Cometlake as identical, update all IS_COFFEELAKE() to also include IS_COMETLAKE(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200602140541.5481-1-chris@chris-wilson.co.uk
2020-05-22drm/i915: Fix includes and local vars orderStanislav Lisovskiy
Removed duplicate include and fixed comment > 80 chars. v2: Added newline after system include and between functions Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200522131843.20477-1-stanislav.lisovskiy@intel.com
2020-05-21drm/i915: Adjust CDCLK accordingly to our DBuf bw needsStanislav Lisovskiy
According to BSpec max BW per slice is calculated using formula Max BW = CDCLK * 64. Currently when calculating min CDCLK we account only per plane requirements, however in order to avoid FIFO underruns we need to estimate accumulated BW consumed by all planes(ddb entries basically) residing on that particular DBuf slice. This will allow us to put CDCLK lower and save power when we don't need that much bandwidth or gain additional performance once plane consumption grows. v2: - Fix long line warning - Limited new DBuf bw checks to only gens >= 11 v3: - Lets track used Dbuf bw per slice and per crtc in bw state (or may be in DBuf state in future), that way we don't need to have all crtcs in state and those only if we detect if are actually going to change cdclk, just same way as we do with other stuff, i.e intel_atomic_serialize_global_state and co. Just as per Ville's paradigm. - Made dbuf bw calculation procedure look nicer by introducing for_each_dbuf_slice_in_mask - we often will now need to iterate slices using mask. - According to experimental results CDCLK * 64 accounts for overall bandwidth across all dbufs, not per dbuf. v4: - Fixed missing const(Ville) - Removed spurious whitespaces(Ville) - Fixed local variable init(reduced scope where not needed) - Added some comments about data rate for planar formats - Changed struct intel_crtc_bw to intel_dbuf_bw - Moved dbuf bw calculation to intel_compute_min_cdclk(Ville) v5: - Removed unneeded macro v6: - Prevent too frequent CDCLK switching back and forth: Always switch to higher CDCLK when needed to prevent bandwidth issues, however don't switch to lower CDCLK earlier than once in 30 minutes in order to prevent constant modeset blinking. We could of course not switch back at all, however this is bad from power consumption point of view. v7: - Fixed to track cdclk using bw_state, modeset will be now triggered only when CDCLK change is really needed. v8: - Lock global state if bw_state->min_cdclk is changed. - Try getting bw_state only if there are crtcs in the commit (need to have read-locked global state) v9: - Do not do Dbuf bw check for gens < 9 - triggers WARN as ddb_size is 0. v10: - Lock global state for older gens as well. v11: - Define new bw_calc_min_cdclk hook, instead of using a condition(Manasi Navare) v12: - Fixed rebase conflict v13: - Added spaces after declarations to make checkpatch happy. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200520150058.16123-1-stanislav.lisovskiy@intel.com
2020-05-19drm/i915/pm: Prefer drm_WARN_ON over WARN_ONPankaj Bharadiya
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON. Conversion is done with below sementic patch: @@ identifier func, T; @@ func(...) { ... struct intel_crtc *T = ...; +struct drm_i915_private *dev_priv = to_i915(T->base.dev); <+... -WARN_ON( +drm_WARN_ON(&dev_priv->drm, ...) ...+> } @@ identifier func, T; @@ func(struct intel_crtc_state *T,...) { +struct drm_i915_private *dev_priv = to_i915(T->uapi.crtc->dev); <+... -WARN_ON( +drm_WARN_ON(&dev_priv->drm, ...) ...+> } changes since v1: - Added dev_priv local variable and used it in drm_WARN_ON calls (Jani) Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-9-pankaj.laxminarayan.bharadiya@intel.com
2020-05-18drm/i915/display: Return error from dbuf allocation failureChris Wilson
drivers/gpu/drm/i915/intel_pm.c:5920 skl_ddb_add_affected_pipes() error: uninitialized symbol 'ret'. Fixes: 3cf43cdc63fb ("drm/i915: Introduce proper dbuf state") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200516190940.12675-1-chris@chris-wilson.co.uk
2020-05-18drm/i915: Fix dbuf slice mask when turning off all the pipesVille Syrjälä
The current dbuf slice computation only happens when there are active pipes. If we are turning off all the pipes we just leave the dbuf slice mask at it's previous value, which may be something other that BIT(S1). If runtime PM will kick in it will however turn off everything but S1. Then on the next atomic commit (if the new dbuf slice mask matches the stale value we left behind) the code will not turn on the other slices we now need. This will lead to underruns as the planes are trying to use a dbuf slice that's not powered up. To work around let's just just explicitly set the dbuf slice mask to BIT(S1) when we are turning off all the pipes. Really the code should just calculate this stuff the same way regardless whether the pipes are on or off, but we're not quite there yet (need a bit more work on the dbuf state for that). v2: Let's not put the fix into dead code Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 3cf43cdc63fb ("drm/i915: Introduce proper dbuf state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200518121354.20401-1-ville.syrjala@linux.intel.com
2020-05-16drm/i915: Clean up dbuf debugs during .atomic_check()Ville Syrjälä
Combine the two per-pipe dbuf debugs into one, and use the canonical [CRTC:%d:%s] style to identify the crtc. Also use the same style as the plane code uses for the ddb start/end, and prefix bitmask properly with 0x to make it clear they are in fact bitmasks. The "how many total slices we are going to use" debug we move to outside the crtc loop so it gets printed only once at the end. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-12-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
generated by cgit (git 2.34.1) at 2024-06-23 09:26:41 +0000