summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/pxp
AgeCommit message (Collapse)Author
2023-10-04Merge drm/drm-next into drm-intel-nextJani Nikula
Backmerge to sync up with drm-intel-gt-next and drm-misc-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-09-19drm/i915/pxp/mtl: Update pxp-firmware packet sizeAlan Previn
Update the GSC-fw input/output HECI packet size to match updated internal fw specs. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230917211933.1407559-3-alan.previn.teres.alexis@intel.com
2023-09-19drm/i915/pxp/mtl: Update pxp-firmware response timeoutAlan Previn
Update the max GSC-fw response time to match updated internal fw specs. Because this response time is an SLA on the firmware, not inclusive of i915->GuC->HW handoff latency, when submitting requests to the GSC fw via intel_gsc_uc_heci_cmd_submit helpers, start the count after the request hits the GSC command streamer. Also, move GSC_REPLY_LATENCY_MS definition from pxp header to intel_gsc_uc_heci_cmd_submit.h since its for any GSC HECI packet. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230917211933.1407559-2-alan.previn.teres.alexis@intel.com
2023-09-15drm/i915/huc: silence injected failure in the load via GSC pathDaniele Ceraolo Spurio
If we can't load the HuC due to an injected failure, we don't want to throw and error and trip CI. Using the gt_probe_error macro for logging ensure that the error is only printed if it wasn't explicitly injected. v2: keep the line to less than 100 characters (checkpatch). Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7061 Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> #v1 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230816231320.1555190-1-daniele.ceraolospurio@intel.com
2023-09-15Merge drm/drm-next into drm-intel-nextJani Nikula
Sync to v6.6-rc1. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-08-15drm/i915/pxp: Optimize GET_PARAM:PXP_STATUSAlan Previn
After recent discussions with Mesa folks, it was requested that we optimize i915's GET_PARAM for the PXP_STATUS without changing the UAPI spec. Add these additional optimizations: - If any PXP initializatoin flow failed, then ensure that we catch it so that we can change the returned PXP_STATUS from "2" (i.e. 'PXP is supported but not yet ready') to "-ENODEV". This typically should not happen and if it does, we have a platform configuration issue. - If a PXP arbitration session creation event failed due to incorrect firmware version or blocking SOC fusing or blocking BIOS configuration (platform reasons that won't change if we retry), then reflect that blockage by also returning -ENODEV in the GET_PARAM:PXP_STATUS. - GET_PARAM:PXP_STATUS should not wait at all if PXP is supported but non-i915 dependencies (component-driver / firmware) we are still pending to complete the init flows. In this case, just return "2" immediately (i.e. 'PXP is supported but not yet ready'). Difference from prio revs: v3: - Rebase with latest tip that has pulled in setting the gsc fw load to fail if proxy init fails. v2: - Use a #define for the default readiness timeout (Vivaik). - Improve comments around the failing of proxy-init. v1: - Change the commit msg style to be imperative. (Jani) - Rename timeout to timeout_ms. (Jani) - Fix is_fw_err_platform_config to use higher order param (pxp) first. (Jani) Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Balasubrawmanian, Vivaik <vivaik.balasubrawmanian@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230802182550.1592926-1-alan.previn.teres.alexis@intel.com
2023-08-15drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-completeAlan Previn
In the case of failed suspend flow or cases where the kernel does not go into full suspend but goes from suspend_prepare back to resume_complete, we get called for a pm_complete but without runtime_pm guaranteed. Thus, ensure we take the runtime_pm when calling intel_pxp_init_hw from within intel_pxp_resume_complete. v2: resume_complete and runtime_resume should abstract a common helper with different wakeref requirements. (Daniele) Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230802190611.1639371-1-alan.previn.teres.alexis@intel.com
2023-08-10drm/i915: Make i915_coherent_map_type GT-centricJonathan Cavitt
Refactor i915_coherent_map_type to be GT-centric rather than device-centric. Each GT may require different coherency handling due to hardware workarounds. Since the function now takes a GT instead of the i915, the function is renamed and moved to the gt folder. Suggested-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Acked-by: Fei Yang <fei.yang@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-3-jonathan.cavitt@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-3-andi.shyti@linux.intel.com
2023-07-25drm/i915: Replace i915->gt0 with to_gt(i915)Andi Shyti
Quite surprised to see that around i915 there are still i915->gt0 references. Replace them with the to_gt() helper. Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230725103330.1041394-1-andi.shyti@linux.intel.com
2023-06-20drm/i915/gsc: Fix intel_gsc_uc_fw_proxy_init_done with directed wakerefsAlan Previn
intel_gsc_uc_fw_proxy_init_done is used by a few code paths and usages. However, certain paths need a wakeref while others can't take a wakeref such as from the runtime_pm_resume callstack. Add a param into this helper to allow callers to direct whether to take the wakeref or not. This resolves the following bug: INFO: task sh:2607 blocked for more than 61 seconds. Not tainted 6.3.0-pxp-gsc-final-jun14+ #297 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:sh state:D stack:13016 pid:2607 ppid:2602 flags:0x00004000 Call Trace: <TASK> __schedule+0x47b/0xe10 schedule+0x58/0xd0 rpm_resume+0x1cc/0x800 ? __pfx_autoremove_wake_function+0x10/0x10 __pm_runtime_resume+0x42/0x80 __intel_runtime_pm_get+0x19/0x80 [i915] gsc_uc_get_fw_status+0x10/0x50 [i915] intel_gsc_uc_fw_init_done+0x9/0x20 [i915] intel_gsc_uc_load_start+0x5b/0x130 [i915] __uc_resume+0xa5/0x280 [i915] intel_runtime_resume+0xd4/0x250 [i915] ? __pfx_pci_pm_runtime_resume+0x10/0x10 __rpm_callback+0x3c/0x160 Fixes: 8c33c3755b75 ("drm/i915/gsc: take a wakeref for the proxy-init-completion check") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230615211940.4061378-1-alan.previn.teres.alexis@intel.com
2023-06-05drm/i915/mtl/huc: auth HuC via GSCDaniele Ceraolo Spurio
The full authentication via the GSC requires an heci packet submission to the GSC FW via the GSC CS. The GSC has new PXP command for this (literally called NEW_HUC_AUTH). The intel_huc_auth function is also updated to handle both authentication types. v2: check that the GuC auth for clear media has completed before proceding with the full auth v3: use a define for the object size (Alan) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-6-daniele.ceraolospurio@intel.com
2023-06-05drm/i915/huc: differentiate the 2 steps of the MTL HuC auth flowDaniele Ceraolo Spurio
Before we add the second step of the MTL HuC auth (via GSC), we need to have the ability to differentiate between them. To do so, the huc authentication check is duplicated for GuC and GSC auth, with GSC-enabled binaries being considered fully authenticated only after the GSC auth step. To report the difference between the 2 auth steps, a new case is added to the HuC getparam. This way, the clear media driver can start submitting before full auth, as partial auth is enough for those workloads. v2: fix authentication status check for DG2 v3: add a better comment at the top of the HuC file to explain the different approaches to load and auth (John) v4: update call to intel_huc_is_authenticated in the pxp code to check for GSC authentication v5: drop references to meu and esclamation mark in huc_auth print (John) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> #v2 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-5-daniele.ceraolospurio@intel.com
2023-06-02drm/i915/pxp: Fix size_t format specifier in gsccs_send_message()Nathan Chancellor
When building ARCH=i386 allmodconfig, the following warning occurs: In file included from include/linux/device.h:15, from include/linux/node.h:18, from include/linux/cpu.h:17, from include/linux/static_call.h:135, from arch/x86/include/asm/perf_event.h:5, from include/linux/perf_event.h:25, from drivers/gpu/drm/i915/i915_pmu.h:11, from drivers/gpu/drm/i915/gt/intel_engine_types.h:21, from drivers/gpu/drm/i915/gt/intel_context_types.h:18, from drivers/gpu/drm/i915/gem/i915_gem_context_types.h:20, from drivers/gpu/drm/i915/i915_request.h:34, from drivers/gpu/drm/i915/i915_active.h:13, from drivers/gpu/drm/i915/gt/intel_context.h:13, from drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:8: drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c: In function 'gsccs_send_message': include/drm/drm_print.h:456:39: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] 456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__) | ^~~~~~~~ include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap' 110 | _p_func(dev, fmt, ##__VA_ARGS__); \ | ^~~ include/linux/dev_printk.h:146:61: note: in expansion of macro 'dev_fmt' 146 | dev_printk_index_wrap(_dev_warn, KERN_WARNING, dev, dev_fmt(fmt), ##__VA_ARGS__) | ^~~~~~~ include/drm/drm_print.h:456:9: note: in expansion of macro 'dev_warn' 456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__) | ^~~~ include/drm/drm_print.h:466:9: note: in expansion of macro '__drm_printk' 466 | __drm_printk((drm), warn,, fmt, ##__VA_ARGS__) | ^~~~~~~~~~~~ drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:146:17: note: in expansion of macro 'drm_warn' 146 | drm_warn(&i915->drm, "caller with insufficient PXP reply size %u (%ld)\n", | ^~~~~~~~ cc1: all warnings being treated as errors Use the '%zu' format specifier, as the variable is a 'size_t'. Fixes: dc9ac125d81f ("drm/i915/pxp: Add GSC-CS backend to send GSC fw messages") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-pxp-size_t-wformat-v1-1-9631081e2e5b@kernel.org
2023-05-11drm/i915/pxp: Enable PXP with MTL-GSC-CSAlan Previn
Enable PXP with MTL-GSC-CS: add the has_pxp into device info and increase the debugfs teardown timeouts to align with new GSC-CS + firmware specs. Now that we have 3 places that are selecting pxp timeouts based on tee vs gsccs back-end, let's add a helper. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-9-alan.previn.teres.alexis@intel.com
2023-05-11drm/i915/pxp: On MTL, KCR enabling doesn't wait on tee componentAlan Previn
On legacy platforms, KCR HW enabling is done at the time the mei component interface is bound. It's also disabled during unbind. However, for MTL onwards, we don't depend on a tee component to start sending GSC-CS firmware messages. Thus, immediately enable (or disable) KCR HW on PXP's init, fini and resume. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-8-alan.previn.teres.alexis@intel.com
2023-05-11drm/i915/uapi/pxp: Add a GET_PARAM for PXPAlan Previn
Because of the additional firmware, component-driver and initialization depedencies required on MTL platform before a PXP context can be created, UMD calling for PXP creation as a way to get-caps can take a long time. An actual real world customer stack has seen this happen in the 4-to-8 second range after the kernel starts (which sees MESA's init appear in the middle of this range as the compositor comes up). To avoid unncessary delays experienced by the UMD for get-caps purposes, add a GET_PARAM for I915_PARAM_PXP_SUPPORT. However, some failures can still occur after all the depedencies are met (such as firmware init flow failure, bios configurations or SOC fusing not allowing PXP enablement). Those scenarios will only be known to user space when it attempts creating a PXP context and is documented in the GEM UAPI headers. While making this change, create a helper that is common to both GET_PARAM caller and intel_pxp_start since the latter does similar checks. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-7-alan.previn.teres.alexis@intel.com
2023-05-11drm/i915/pxp: Add ARB session creation and cleanupAlan Previn
Add MTL's function for ARB session creation using PXP firmware version 4.3 ABI structure format. While relooking at the ARB session creation flow in intel_pxp_start, let's address missing UAPI documentation. Without actually changing backward compatible behavior, update i915's drm-uapi comments that describe the possible error values when creating a context with I915_CONTEXT_PARAM_PROTECTED_CONTENT: Since the first merge of PXP support on ADL, i915 returns -ENXIO if a dependency such as firmware or component driver was yet to be loaded or returns -EIO if the creation attempt failed when requested by the PXP firmware (specific firmware error responses are reported in dmesg). Add MTL's function for ARB session invalidation but this reuses PXP firmware version 4.2 ABI structure format. For both cases, in the back-end gsccs functions for sending messages to the firmware inspect the GSC-CS-Mem-Header's pending-bit which means the GSC firmware is busy and we should retry. Given the last hw requirement, lets also update functions in front-end layer that wait for session creation or teardown completion to use new worst case timeout periods. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-6-alan.previn.teres.alexis@intel.com
2023-05-11drm/i915/pxp: Add GSC-CS backend to send GSC fw messagesAlan Previn
Add GSC engine based method for sending PXP firmware packets to the GSC firmware for MTL (and future) products. Use the newly added helpers to populate the GSC-CS memory header and send the message packet to the FW by dispatching the GSC_HECI_CMD_PKT instruction on the GSC engine. We use non-priveleged batches for submission to GSC engine which require two buffers for the request: - a buffer for the HECI packet that contains PXP FW commands - a batch-buffer that contains the engine instruction for sending the HECI packet to the GSC firmware. Thus, add the allocation and freeing of these buffers in gsccs init and fini. The GSC-fw may reply to commands with a SUCCESS but with an additional pending-bit set in the reply packet. This bit means the GSC-FW is currently busy and the caller needs to try again with the gsc_message_handle the fw returned. Thus, add a wrapper to continuously retry send_message while replaying the gsc_message_handle. Retries need to follow the arch-spec count and delay until GSC-FW replies with the real SUCCESS or timeout after that spec'd delay. The GSC-fw requires a non-zero host_session_handle provided by the caller to enable gsc_message_handle tracking. Thus, allocate the host_session_handle at init and destroy it at fini (the latter requiring an FYI to the gsc-firmware). Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-5-alan.previn.teres.alexis@intel.com
2023-05-11drm/i915/pxp: Add MTL hw-plumbing enabling for KCR operationAlan Previn
Add MTL hw-plumbing enabling for KCR operation under PXP which includes: 1. Updating 'pick-gt' to get the media tile for KCR interrupt handling 2. Adding MTL's KCR registers for PXP operation (init, status-checking, etc.). While doing #2, lets create a separate registers header file for PXP to be consistent with other i915 global subsystems. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-3-alan.previn.teres.alexis@intel.com
2023-05-11drm/i915/pxp: Add GSC-CS back-end resource init and cleanupAlan Previn
For MTL, the PXP back-end transport uses the GSC engine to submit HECI packets through the HW to the GSC firmware for PXP arb session management. This submission uses a non-priveleged batch buffer, a buffer for the command packet and of course a context targeting the GSC-CS. Thus for MTL, we need to allocate and free a set of execution submission resources for the management of the arbitration session. Lets start with the context creation first since that object and its usage is very straight-forward. We'll add the buffer allocation and freeing later when we introduce the gsccs' send-message function. Do this one time allocation of gsccs specific resources in a new gsccs source file with intel_pxp_gsccs_init / fini functions and hook them up from the PXP front-end. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-2-alan.previn.teres.alexis@intel.com
2023-05-04drm/i915/pxp: fix kernel-doc for member dev_linkJani Nikula
Add /** to make it a kernel-doc. drivers/gpu/drm/i915/pxp/intel_pxp_types.h:96: warning: Function parameter or member 'dev_link' not described in 'intel_pxp' Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/84f89a3332fa323888f1e3241fb51ae10417ecd7.1683041799.git.jani.nikula@intel.com
2023-04-05drm/i915/pxp: limit drm-errors or warning on firmware API failuresAlan Previn
MESA driver is creating protected context on every driver handle creation to query caps bits for app. So when running CI tests, they are observing hundreds of drm_errors when enabling PXP in .config but using SOC fusing or BIOS configuration that cannot support PXP sessions. The fixes tag referenced below was to resolve a related issue where we wanted to silence error messages, but that case was due to outdated IFWI (firmware) that definitely needed an upgrade and was, at that point, considered a one-off case as opposed to today's realization that default CI was enabling PXP in kernel config for all testing. So with this patch, let's strike a balance between issues that is critical but are root-caused from HW/platform gaps (louder drm-warn but just ONCE) vs other cases where it could also come from session state machine (which cannot be a WARN_ONCE since it can be triggered due to runtime operation events). Let's use helpers for these so as more functions are added in future features / HW (or as FW designers continue to bless upstreaming of the error codes and meanings), we only need to update the helpers. NOTE: Don't completely remove FW errors (via drm_debug) or else cusomer apps that really needs to know that content protection failed won't be aware of it. v2: - Add fixes tag (Trvtko) v3: - Break multi-line drm_dbg strings into separate drm_dbg (Daniele) - Fix couple of typecasting nits (Daniele) v4: - Unsuccessful PXP FW cmd due to platform configuration shouldn't use drm_WARN_once (Tvrtko), Switched to use drm_info_once. v5: - Added "reported-and-tested" by Eero. Reported-and-tested-by: Eero Tamminen <eero.t.tamminen@intel.com> Fixes: b762787bf767 ("drm/i915/pxp: Use drm_dbg if arb session failed due to fw version") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323184156.4140659-1-alan.previn.teres.alexis@intel.com
2023-03-22Merge tag 'drm-intel-gt-next-2023-03-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Fix issue #6333: "list_add corruption" and full system lockup from performance monitoring (Janusz) - Give the punit time to settle before fatally failing (Aravind, Chris) - Don't use stolen memory or BAR for ring buffers on LLC platforms (John) - Add missing ecodes and correct timeline seqno on GuC error captures (John) - Make sure DSM size has correct 1MiB granularity on Gen12+ (Nirmoy, Lucas) - Fix potential SSEU max_subslices array-index-out-of-bounds access on Gen11 (Andrea) - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+ (Matt R.) - Apply Wa_1408615072/Wa_1407596294 correctly on Gen11 (Matt R) - Apply LNCF/LBCF workarounds correctly on XeHP SDV/PVC/DG2 (Matt R) - Implement Wa_1606376872 for Xe_LP (Gustavo) - Consider GSI offset when doing MCR lookups on Meteorlake+ (Matt R.) - Add engine TLB invalidation for Meteorlake (Matt R.) - Fix GSC Driver-FLR completion on Meteorlake (Alan) - Fix GSC races on driver load/unload on Meteorlake+ (Daniele) - Disable MC6 for MTL A step (Badal) - Consolidate TLB invalidation flow (Tvrtko) - Improve debug GuC/HuC debug messages (Michal Wa., John) - Move fd_install after last use of fence (Rob) - Initialize the obj flags for shmem objects (Aravind) - Fix missing debug object activation (Nirmoy) - Probe lmem before the stolen portion (Matt A) - Improve clean up of GuC busyness stats worker (John) - Fix missing return code checks in GuC submission init (John) - Annotate two more workaround/tuning registers as MCR on PVC (Matt R) - Fix GEN8_MISCCPCTL definition and remove unused INF_UNIT_LEVEL_CLKGATE (Lucas) - Use sysfs_emit() and sysfs_emit_at() (Nirmoy) - Make kobj_type structures constant (Thomas W.) - make kobj attributes const on gt/ (Jani) - Remove the unused virtualized start hack on buddy allocator (Matt A) - Remove redundant check for DG1 (Lucas) - Move DG2 tuning to the right function (Lucas) - Rename dev_priv to i915 for private data naming consistency in gt/ (Andi) - Remove unnecessary whitelisting of CS_CTX_TIMESTAMP on Xe_HP platforms (Matt R.) - - Escape wildcard in method names in kerneldoc (Bagas) - Selftest improvements (Chris, Jonathan, Tvrtko, Anshuman, Tejas) - Fix sparse warnings (Jani) [airlied: fix unused variable in intel_workarounds] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZBMSb42yjjzczRhj@jlahtine-mobl.ger.corp.intel.com
2023-02-08drm/i915/pxp: fix __le64 access to get rid of sparse warningJani Nikula
__le64 and friends should go through the cpu_to_* and *_to_cpu accessors: drivers/gpu/drm/i915/pxp/intel_pxp_huc.c:41:35: warning: incorrect type in assignment (different base types) drivers/gpu/drm/i915/pxp/intel_pxp_huc.c:41:35: expected restricted __le64 [assigned] [usertype] huc_base_address drivers/gpu/drm/i915/pxp/intel_pxp_huc.c:41:35: got unsigned long long [assigned] [usertype] huc_phys_addr Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207124026.2105442-4-jani.nikula@intel.com
2023-01-27drm/i915/pxp: Pxp hw init should be in resume_completeAlan Previn
During suspend flow, i915 currently achors' on the pm_suspend_prepare callback as the location where we quiesce the entire GPU and perform all necessary cleanup in order to go into suspend. PXP is also called during this time to perform the arbitration session teardown (with the assurance no additional GEM IOCTLs will come after that could restart the session). However, if other devices or drivers fail their suspend_prepare, the system will not go into suspend and i915 will be expected to resume operation. In this case, we need to re-initialize the PXP hardware and this really should be done within the pm_resume_complete callback which is the correct opposing function in the resume sequence to match pm_suspend_prepare of the suspend sequence. Because this callback is the last thing at the end of resuming we expect little to no impact to the rest of the i915 resume sequence with this change. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-7-alan.previn.teres.alexis@intel.com
2023-01-27drm/i915/pxp: Trigger the global teardown for before suspendingAlan Previn
A driver bug was recently discovered where the security firmware was receiving internal HW signals indicating that session key expirations had occurred. Architecturally, the firmware was expecting a response from the GuC to acknowledge the event with the firmware side. However the OS was in a suspended state and GuC had been reset. Internal specifications actually required the driver to ensure that all active sessions be properly cleaned up in such cases where the system is suspended and the GuC potentially unable to respond. This patch adds the global teardown code in i915's suspend_prepare code path. v2 : Split __pxp_global_teardown_locked helper into two variants for teardown-with-restart vs teardown-for-suspend/shutdown. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Juston Li <justonli@chromium.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-6-alan.previn.teres.alexis@intel.com
2023-01-27drm/i915/pxp: Invalidate all PXP fw sessions during teardownAlan Previn
A gap was recently discovered where if an application did not invalidate all of the stream keys (intentionally or not), and the driver did a full PXP global teardown on the GT subsystem, we find that future session creation would fail on the security firmware's side of the equation. i915 is the entity that needs ensure the sessions' state across both iGT and security firmware are at a known clean point when performing a full global teardown. Architecturally speaking, i915 should inspect all active sessions and submit the invalidate-stream-key PXP command to the security firmware for each of them. However, for the upstream i915 driver we only support the arbitration session that can be created so that will be the only session we will cleanup. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Juston Li <justonli@chromium.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-5-alan.previn.teres.alexis@intel.com
2023-01-27drm/i915/pxp: add device link between i915 and mei_pxpAlexander Usyskin
Add device link with i915 as consumer and mei_pxp as supplier to ensure proper ordering of power flows. V2: condition on absence of heci_pxp to filter out DG Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-3-alan.previn.teres.alexis@intel.com
2023-01-18drm/i915: remove a couple of superfluous i915_drm.h includesJani Nikula
Remove a couple of unnecessary includes. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230117123856.2271720-1-jani.nikula@intel.com
2023-01-12drm/i915/pxp: Use drm_dbg if arb session failed due to fw versionAlan Previn
If PXP arb-session is being attempted on older hardware SKUs or on hardware with older, unsupported, firmware versions, then don't report the failure with a drm_error. Instead, look specifically for the API-version error reply and drm_dbg that reply. In this case, the user-space will eventually get a -ENODEV for the protected context creation which is the correct behavior and we don't create unnecessary drm_error's in our dmesg (for what is unsupported platforms). Changes from prio revs: v2 : - remove unnecessary newline. (Jani) v1 : - print incorrect version from input packet, not output. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221221174901.2703954-1-alan.previn.teres.alexis@intel.com
2022-12-09drm/i915/pxp: Promote pxp subsystem to top-level of i915Alan Previn
Starting with MTL, there will be two GT-tiles, a render and media tile. PXP as a service for supporting workloads with protected contexts and protected buffers can be subscribed by process workloads on any tile. However, depending on the platform, only one of the tiles is used for control events pertaining to PXP operation (such as creating the arbitration session and session tear-down). PXP as a global feature is accessible via batch buffer instructions on any engine/tile and the coherency across tiles is handled implicitly by the HW. In fact, for the foreseeable future, we are expecting this single-control-tile for the PXP subsystem. In MTL, it's the standalone media tile (not the root tile) because it contains the VDBOX and KCR engine (among the assets PXP relies on for those events). Looking at the current code design, each tile is represented by the intel_gt structure while the intel_pxp structure currently hangs off the intel_gt structure. Keeping the intel_pxp structure within the intel_gt structure makes some internal functionalities more straight forward but adds code complexity to code readability and maintainibility to many external-to-pxp subsystems which may need to pick the correct intel_gt structure. An example of this would be the intel_pxp_is_active or intel_pxp_is_enabled functionality which should be viewed as a global level inquiry, not a per-gt inquiry. That said, this series promotes the intel_pxp structure into the drm_i915_private structure making it a top-level subsystem and the PXP subsystem will select the control gt internally and keep a pointer to it for internal reference. This promotion comes with two noteworthy changes: 1. Exported pxp functions that are called by external subsystems (such as intel_pxp_enabled/active) will have to check implicitly if i915->pxp is valid as that structure will not be allocated for HW that doesn't support PXP. 2. Since GT is now considered a soft-dependency of PXP we are ensuring that GT init happens before PXP init and vice versa for fini. This causes a minor ordering change whereby we previously called intel_pxp_suspend after intel_uc_suspend but now is before i915_gem_suspend_late but the change is required for correct dependency flows. Additionally, this re-order change doesn't have any impact because at that point in either case, the top level entry to i915 won't observe any PXP events (since the GPU was quiesced during suspend_prepare). Also, any PXP event doesn't really matter when we disable the PXP HW (global GT irqs are already off anyway, so even if there was a bug that generated spurious events we wouldn't see it and we would just clean it up on resume which is okay since the default fallback action for PXP would be to keep the sessions off at this suspend stage). Changes from prior revs: v11: - Reformat a comment (Tvrtko). v10: - Change the code flow for intel_pxp_init to make it more cleaner and readible with better comments explaining the difference between full-PXP-feature vs the partial-teelink inits depending on the platform. Additionally, only do the pxp allocation when we are certain the subsystem is needed. (Tvrtko). v9: - Cosmetic cleanups in supported/enabled/active. (Daniele). - Add comments for intel_pxp_init and pxp_get_ctrl_gt that explain the functional flow for when PXP is not supported but the backend-assets are needed for HuC authentication (Daniele and Tvrtko). - Fix two remaining functions that are accessible outside PXP that need to be checking pxp ptrs before using them: intel_pxp_irq_handler and intel_pxp_huc_load_and_auth (Tvrtko and Daniele). - User helper macro in pxp-debugfs (Tvrtko). v8: - Remove pxp_to_gt macro (Daniele). - Fix a bug in pxp_get_ctrl_gt for the case of MTL and we don't support GSC-FW on it. (Daniele). - Leave i915->pxp as NULL if we dont support PXP and in line with that, do additional validity check on i915->pxp for intel_pxp_is_supported/enabled/active (Daniele). - Remove unncessary include header from intel_gt_debugfs.c and check drm_minor i915->drm.primary (Daniele). - Other cosmetics / minor issues / more comments on suspend flow order change (Daniele). v7: - Drop i915_dev_to_pxp and in intel_pxp_init use 'i915->pxp' through out instead of local variable newpxp. (Rodrigo) - In the case intel_pxp_fini is called during driver unload but after i915 loading failed without pxp being allocated, check i915->pxp before referencing it. (Alan) v6: - Remove HAS_PXP macro and replace it with intel_pxp_is_supported because : [1] introduction of 'ctrl_gt' means we correct this for MTL's upcoming series now. [2] Also, this has little impact globally as its only used by PXP-internal callers at the moment. - Change intel_pxp_init/fini to take in i915 as its input to avoid ptr-to-ptr in init/fini calls.(Jani). - Remove the backpointer from pxp->i915 since we can use pxp->ctrl_gt->i915 if we need it. (Rodrigo). v5: - Switch from series to single patch (Rodrigo). - change function name from pxp_get_kcr_owner_gt to pxp_get_ctrl_gt. - Fix CI BAT failure by removing redundant call to intel_pxp_fini from driver-remove. - NOTE: remaining open still persists on using ptr-to-ptr and back-ptr. v4: - Instead of maintaining intel_pxp as an intel_gt structure member and creating a number of convoluted helpers that takes in i915 as input and redirects to the correct intel_gt or takes any intel_gt and internally replaces with the correct intel_gt, promote it to be a top-level i915 structure. v3: - Rename gt level helper functions to "intel_pxp_is_enabled/ supported/ active_on_gt" (Daniele) - Upgrade _gt_supports_pxp to replace what was intel_gtpxp_is supported as the new intel_pxp_is_supported_on_gt to check for PXP feature support vs the tee support for huc authentication. Fix pxp-debugfs-registration to use only the former to decide support. (Daniele) - Couple minor optimizations. v2: - Avoid introduction of new device info or gt variables and use existing checks / macros to differentiate the correct GT->PXP control ownership (Daniele Ceraolo Spurio) - Don't reuse the updated global-checkers for per-GT callers (such as other files within PXP) to avoid unnecessary GT-reparsing, expose a replacement helper like the prior ones. (Daniele). v1: - Add one more patch to the series for the intel_pxp suspend/resume for similar refactoring References: https://patchwork.freedesktop.org/patch/msgid/20221202011407.4068371-1-alan.previn.teres.alexis@intel.com Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221208180542.998148-1-alan.previn.teres.alexis@intel.com
2022-11-16drm/i915/pxp: Separate PXP FW interface structures for both v42 and 43Alan Previn
Previously, we only used PXP FW interface version-42 structures for PXP arbitration session on ADL/TGL products and version-43 for HuC authentication on DG2. That worked fine despite not differentiating such versioning of the PXP firmware interaction structures. This was okay back then because the only commands used via version 42 was not used via version 43 and vice versa. With MTL, we'll need both these versions side by side for the same commands (PXP-session) with the older platform feature support. That said, let's create separate files to define the structures and definitions for both version-42 and 43 of PXP FW interfaces. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108045628.4187260-2-alan.previn.teres.alexis@intel.com
2022-11-08drm/i915/pxp: use <> instead of "" for headers in include/Jani Nikula
Headers in include/ should be included using the system header #include syntax. Fixes: 887a193b4fb1 ("drm/i915/pxp: add huc authentication and loading command") Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Vitaly Lubart <vitaly.lubart@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107140454.2680954-1-jani.nikula@intel.com
2022-11-04Merge tag 'drm-intel-gt-next-2022-11-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Fix for #7306: [Arc A380] white flickering when using arc as a secondary gpu (Matt A) - Add Wa_18017747507 for DG2 (Wayne) - Avoid spurious WARN on DG1 due to incorrect cache_dirty flag (Niranjana, Matt A) - Corrections to CS timestamp support for Gen5 and earlier (Ville) - Fix a build error used with clang compiler on hwmon (GG) - Improvements to LMEM handling with RPM (Anshuman, Matt A) - Cleanups in dmabuf code (Mike) - Selftest improvements (Matt A) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
2022-11-01Merge tag 'drm-intel-next-2022-10-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Hotplug code clean-up and organization (Jani, Gustavo) - More VBT specific code clean-up, doc, organization, and improvements (Ville) - More MTL enabling work (Matt, RK, Anusha, Jose) - FBC related clean-ups and improvements (Ville) - Removing unused sw_fence_await_reservation (Niranjana) - Big chunch of display house clean-up (Ville) - Many Watermark fixes and clean-ups (Ville) - Fix device info for devices without display (Jani) - Fix TC port PLLs after readout (Ville) - DPLL ID clean-ups (Ville) - Prep work for finishing (de)gamma readout (Ville) - PSR fixes and improvements (Jouni, Jose) - Reject excessive dotclocks early (Ville) - DRRS related improvements (Ville) - Simplify uncore register updates (Andrzej) - Fix simulated GPU reset wrt. encoder HW readout (Imre) - Add a ADL-P workaround (Jose) - Fix clear mask in GEN7_MISCCPCTL update (Andrzej) - Temporarily disable runtime_pm for discrete (Anshuman) - Improve fbdev debugs (Nirmoy) - Fix DP FRL link training status (Ankit) - Other small display fixes (Ankit, Suraj) - Allow panel fixed modes to have differing sync polarities (Ville) - Clean up crtc state flag checks (Ville) - Fix race conditions during DKL PHY accesses (Imre) - Prep-work for cdclock squash and crawl modes (Anusha) - ELD precompute and readout (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
2022-10-03drm/i915/dg2: setup HuC loading via GSCDaniele Ceraolo Spurio
The GSC will perform both the load and the authentication, so we just need to check the auth bit after the GSC has replied. Since we require the PXP module to load the HuC, the earliest we can trigger the load is during the pxp_bind operation. Note that GSC-loaded HuC survives GT reset, so we need to just mark it as ready when we re-init the GT HW. V2: move setting of HuC fw error state to the failure path of the HuC auth function, so it covers both the legacy and new auth flows V4: 1. Fix typo in the commit message 2. style fix in intel_huc_wait_for_auth_complete() Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com
2022-10-03drm/i915/pxp: add huc authentication and loading commandTomas Winkler
Add support for loading HuC via a pxp stream command. V4: 1. Remove unnecessary include in intel_pxp_huc.h (Jani) 2. Adjust copyright year to 2022 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-10-daniele.ceraolospurio@intel.com
2022-10-03drm/i915/pxp: implement function for sending tee stream commandVitaly Lubart
Command to be sent via the stream interface are written to a local memory page, whose address is then provided to the GSC. The interface supports providing a full sg with multiple pages for both input and output messages, but since for now we only aim to support short and synchronous messages we can use a single page for both input and output. Note that the mei interface expects an sg of 4k pages, while our lmem pages are 64k. If we ever need to support more than 4k we'll need to convert. Added a TODO comment to the code to record this. Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-9-daniele.ceraolospurio@intel.com
2022-10-03drm/i915/pxp: load the pxp module when we have a gsc-loaded hucDaniele Ceraolo Spurio
The mei_pxp module is required to send the command to load authenticate the HuC to the GSC even if pxp is not in use for protected content management. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-8-daniele.ceraolospurio@intel.com
2022-09-27drm/i915/pxp: Add firmware status when ARB session failsAlan Previn
Add firmware status using a drm_warn when ARB session fails or else a drm_dbg when the ARB session register slot bit did get set. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Juston Li <justonli@chromium.org> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220923064542.415252-2-alan.previn.teres.alexis@intel.com
2022-09-21Merge tag 'drm-intel-gt-next-2022-09-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - MEI subsystem pieces for XeHP SDV GSC support These are Acked-by Greg. Driver Changes: - Release mmaps on RPM suspend on discrete GPUs (Anshuman) - Update GuC version to 7.5 on DG1, DG2 and ADL - Revert "drm/i915/dg2: extend Wa_1409120013 to DG2" (Lucas) - MTL enabling incl. standalone media (Matt R, Lucas) - Explicitly clear BB_OFFSET for new contexts on Gen8+ (Chris) - Fix throttling / perf limit reason decoding (Ashutosh) - XeHP SDV GSC support (Vitaly, Alexander, Tomas) - Fix issues with overrding firmware file paths (John) - Invert if-else ladders to check latest version first (Lucas) - Cancel GuC engine busyness worker synchronously (Umesh) - Skip applying copy engine fuses outside PVC (Lucas) - Eliminate Gen10 frequency read function (Lucas) - Static code checker fixes (Gaosheng) - Selftest improvements (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YyQ4Jgl3cpGL1/As@jlahtine-mobl.ger.corp.intel.com
2022-09-12drm/i915/mtl: Use primary GT's irq lock for media GTMatt Roper
When we hook up interrupts (in the next patch), interrupts for the media GT are still processed as part of the primary GT's interrupt flow. As such, we should share the same IRQ lock with the primary GT. Let's convert gt->irq_lock into a pointer and just point the media GT's instance at the same lock the primary GT is using. v2: - Point media's gt->irq_lock at the primary GT lock properly. (Daniele) - Fix jump target for intel_root_gt_init_early errors. (Daniele) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-14-matthew.d.roper@intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2022-09-12Merge tag 'drm-intel-gt-next-2022-09-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Revert "drm/i915/dg2: Add preemption changes for Wa_14015141709" The intent of Wa_14015141709 was to inform us that userspace can no longer control object-level preemption as it has on past platforms (i.e., by twiddling register bit CS_CHICKEN1[0]). The description of the workaround in the spec wasn't terribly well-written, and when we requested clarification from the hardware teams we were told that on the kernel side we should also probably stop setting FF_SLICE_CS_CHICKEN1[14], which is the register bit that directs the hardware to honor the settings in per-context register CS_CHICKEN1. It turns out that this guidance about FF_SLICE_CS_CHICKEN1[14] was a mistake; even though CS_CHICKEN1[0] is non-operational and useless to userspace, there are other bits in the register that do still work and might need to be adjusted by userspace in the future (e.g., to implement other workarounds that show up). If we don't set FF_SLICE_CS_CHICKEN1[14] in i915, then those future workarounds would not take effect. Even more details at: https://lists.freedesktop.org/archives/intel-gfx/2022-September/305478.html Driver Changes: - Align GuC/HuC firmware versioning scheme to kernel practices (John) - Fix #6639: h264 hardware video decoding broken in 5.19 on Intel(R) Celeron(R) N3060 (Nirmoy) - Meteorlake (MTL) enabling (Matt R) - GuC SLPC improvements (Vinay, Rodrigo) - Add thread execution tuning setting for ATS-M (Matt R) - Don't start PXP without mei_pxp bind (Juston) - Remove leftover verbose debug logging from GuC error capture (John) - Abort suspend on low system memory conditions (Nirmoy, Matt A, Chris) - Add DG2 Wa_16014892111 (Matt R) - Rename ggtt_view as gtt_view (Niranjana) - Consider HAS_FLAT_CCS() in needs_ccs_pages (Matt A) - Don't try to disable host RPS when this was never enabled. (Rodrigo) - Clear stalled GuC CT request after a reset (Daniele) - Remove runtime info printing from GuC time stamp logging (Jani) - Skip Bit12 fw domain reset for gen12+ (Sushma, Radhakrishna) - Make GuC log sizes runtime configurable (John) - Selftest improvements (Daniele, Matt B, Andrzej) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YxshfqUN+vDe92Zn@jlahtine-mobl.ger.corp.intel.com
2022-08-25drm/i915/pxp: don't start pxp without mei_pxp bindJuston Li
pxp will not start correctly until after mei_pxp bind completes and intel_pxp_init_hw() is called. Wait for the bind to complete before proceeding with startup. This fixes a race condition during bootup where we observed a small window for pxp commands to be sent, starting pxp before mei_pxp bind completed. Changes since v2: - wait for pxp_component to bind instead of returning -EAGAIN (Daniele) Changes since v1: - check pxp_component instead of pxp_component_added (Daniele) - pxp_component needs tee_mutex (Daniele) - return -EAGAIN so caller knows to retry (Daniele) Signed-off-by: Juston Li <justonli@chromium.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220818174205.2412730-1-justonli@chromium.org
2022-06-08drm/i915/pxp: fix sparse warning for not declared symbolJani Nikula
Fix: drivers/gpu/drm/i915/pxp/intel_pxp_debugfs.c:61:6: warning: symbol 'intel_pxp_debugfs_register' was not declared. Should it be static? Sort and remove the redundant pxp prefixes from the includes while at it. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220506120405.2582372-1-jani.nikula@intel.com
2022-03-17drm/i915: include uapi/drm/i915_drm.h directly where neededJani Nikula
Remove the uapi/drm/i915_drm.h include from drm/i915_drm.h, and stop being a proxy for uapi/drm/i915_drm.h. Include uapi/drm/i915_drm.h and drm/i915_drm.h only where needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311100639.114685-2-jani.nikula@intel.com
2022-03-02drm/i915: Use str_yes_no()Lucas De Marchi
Remove the local yesno() implementation and adopt the str_yes_no() from linux/string_helpers.h. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
2022-02-21drm/i915/pxp: prefer forward declaration over includesJani Nikula
Always use forward declarations instead of includes in headers if possible. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214173644.2097124-1-jani.nikula@intel.com
2022-02-02drm/i915: Move GT registers to their own header fileMatt Roper
This is a huge, chaotic mass of registers copied over as-is without any real cleanup. We'll come back and organize these better, align on consistent coding style, remove dead code, etc. in separate patches later that will be easier to review. v2: - Add missing include in intel_pxp_irq.c v3: - Correct a few indentation errors (Lucas) - Minor conflict resolution Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
2022-01-10drm/i915/pxp: Hold RPM wakelock during PXP unbindJuston Li
Similar to commit b8d8436840ca ("drm/i915/gt: Hold RPM wakelock during PXP suspend") but to fix the same warning for unbind during shutdown: ------------[ cut here ]------------ RPM wakelock ref not held during HW access WARNING: CPU: 0 PID: 4139 at drivers/gpu/drm/i915/intel_runtime_pm.h:115 gen12_fwtable_write32+0x1b7/0 Modules linked in: 8021q ccm rfcomm cmac algif_hash algif_skcipher af_alg uinput snd_hda_codec_hdmi vf industrialio iwl7000_mac80211 cros_ec_sensorhub lzo_rle lzo_compress zram iwlwifi cfg80211 joydev CPU: 0 PID: 4139 Comm: halt Tainted: G U W 5.10.84 #13 344e11e079c4a03940d949e537eab645f6 RIP: 0010:gen12_fwtable_write32+0x1b7/0x200 Code: 48 c7 c7 fc b3 b5 89 31 c0 e8 2c f3 ad ff 0f 0b e9 04 ff ff ff c6 05 71 e9 1d 01 01 48 c7 c7 d67 RSP: 0018:ffffa09ec0bb3bb0 EFLAGS: 00010246 RAX: 12dde97bbd260300 RBX: 00000000000320f0 RCX: ffffffff89e60ea0 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffffffff89e60e70 RBP: ffffa09ec0bb3bd8 R08: 0000000000000000 R09: ffffa09ec0bb3950 R10: 00000000ffffdfff R11: ffffffff89e91160 R12: 0000000000000000 R13: 0000000028121969 R14: ffff9515c32f0990 R15: 0000000040000000 FS: 0000790dcf225740(0000) GS:ffff951737800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000058b25efae147 CR3: 0000000133ea6001 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: intel_pxp_fini_hw+0x2f/0x39 i915_pxp_tee_component_unbind+0x1c/0x42 component_unbind+0x32/0x48 component_unbind_all+0x80/0x9d take_down_master+0x24/0x36 component_master_del+0x56/0x70 mei_pxp_remove+0x2c/0x68 mei_cl_device_remove+0x35/0x68 device_release_driver_internal+0x100/0x1a1 mei_cl_bus_remove_device+0x21/0x79 mei_cl_bus_remove_devices+0x3b/0x51 mei_stop+0x3b/0xae mei_me_shutdown+0x23/0x58 device_shutdown+0x144/0x1d3 kernel_power_off+0x13/0x4c __se_sys_reboot+0x1d4/0x1e9 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x790dcf316273 Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 89 fa be 69 19 12 28 bf ad8 RSP: 002b:00007ffca0df9198 EFLAGS: 00000202 ORIG_RAX: 00000000000000a9 RAX: ffffffffffffffda RBX: 000000004321fedc RCX: 0000790dcf316273 RDX: 000000004321fedc RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007ffca0df9200 R08: 0000000000000007 R09: 0000563ce8cd8970 R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffca0df9308 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003 ---[ end trace 2f501b01b348f114 ]--- ACPI: Preparing to enter system sleep state S5 reboot: Power down Changes since v1: - Rebase to latest drm-tip Fixes: 0cfab4cb3c4e ("drm/i915/pxp: Enable PXP power management") Suggested-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Juston Li <juston.li@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220106200236.489656-2-juston.li@intel.com (cherry picked from commit 57ded5fc98b11d76dae505ca3591b61c9dbbbda7) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
generated by cgit (git 2.34.1) at 2025-06-02 17:27:03 +0000