summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-08Merge tag 'drm-for-v4.16-part2-fixes' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull more drm updates from Dave Airlie: "Ben missed sending his nouveau tree, but he really didn't have much stuff in it: - GP108 acceleration support is enabled by "secure boot" support - some clockgating work on Kepler, and bunch of fixes - the bulk of the diff is regenerated firmware files, the change to them really isn't that large. Otherwise this contains regular Intel and AMDGPU fixes" * tag 'drm-for-v4.16-part2-fixes' of git://people.freedesktop.org/~airlied/linux: (59 commits) drm/i915/bios: add DP max link rate to VBT child device struct drm/i915/cnp: Properly handle VBT ddc pin out of bounds. drm/i915/cnp: Ignore VBT request for know invalid DDC pin. drm/i915/cmdparser: Do not check past the cmd length. drm/i915/cmdparser: Check reg_table_count before derefencing. drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing drm/i915/gvt: Use KVM r/w to access guest opregion drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on drm/i915/gvt: only reset execlist state of one engine during VM engine reset drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops drm/amdgpu: re-enable CGCG on CZ and disable on ST drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning drm/nouveau/mmu: Fix trailing semicolon drm/nouveau: Introduce NvPmEnableGating option drm/nouveau: Add support for SLCG for Kepler2 drm/nouveau: Add support for BLCG on Kepler2 drm/nouveau: Add support for BLCG on Kepler1 drm/nouveau: Add support for basic clockgating on Kepler1 drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets ...
2018-02-07drm/i915/bios: add DP max link rate to VBT child device structJani Nikula
Update VBT defs to reflect revision 216. While at it, default the expected child device struct size to sizeof the size rather than a hardcoded value. v2: Fix bit order (David) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com (cherry picked from commit c4fb60b9aba9f939d3f8575df23fd8d5958ec6ed) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/cnp: Properly handle VBT ddc pin out of bounds.Rodrigo Vivi
If the table result is out of bounds on the array map there is something really wrong with VBT pin so we don't return that vbt_pin, but only return 0 instead. This basically reverts commit 'a8e6f3888b05 ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")' Also this properly fixes commit 9c3b2689d01f ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.") v2: Do in a way that we don't break other platforms. (Jani) v3: Keep debug message (Jani) v4: Don't mess with 0 mapping was noticed by Jani and addressed with a simple solution suggested by Lucas that makes this even simpler. Fixes: a8e6f3888b05 ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.") Fixes: 9c3b2689d01f ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.") Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Kai Heng Feng <kai.heng.feng@canonical.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180125222524.22059-1-rodrigo.vivi@intel.com (cherry picked from commit 3393ce1ed8fc43dbdb83952facaf04e644ca1d54) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/cnp: Ignore VBT request for know invalid DDC pin.Rodrigo Vivi
Let's ignore VBT request if the pin is clearly wrong. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104139 Cc: Kai Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180123174050.4261-1-rodrigo.vivi@intel.com Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> (cherry picked from commit a8e6f3888b05c1e7b685800a3371ce050720368f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/cmdparser: Do not check past the cmd length.Michal Srb
The command MEDIA_VFE_STATE checks bits at offset +2 dwords. However, it is possible to have MEDIA_VFE_STATE command with length = 0 + LENGTH_BIAS = 2. In that case check_cmd will read bits from the following command, or even past the end of the buffer. If the offset ends up outside of the command length, reject the command. Fixes: 351e3db2b363 ("drm/i915: Implement command buffer parsing logic") Signed-off-by: Michal Srb <msrb@suse.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205151745.29292-1-msrb@suse.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-2-chris@chris-wilson.co.uk (cherry picked from commit 3aec7f871c65eb5f76b4125fda432593c834a6f2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/cmdparser: Check reg_table_count before derefencing.Michal Srb
The find_reg function was assuming that there is always at least one table in reg_tables. It is not always true. In case of VCS or VECS, the reg_tables is NULL and reg_table_count is 0, implying that no register-accessing commands are allowed. However, the command tables include commands such as MI_STORE_REGISTER_MEM. When trying to check such command, the find_reg would dereference NULL pointer. Now it will just return NULL meaning that the register was not found and the command will be rejected. Fixes: 76ff480ec963 ("drm/i915/cmdparser: Use binary search for faster register lookup") Signed-off-by: Michal Srb <msrb@suse.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205142916.27092-2-msrb@suse.com Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-1-chris@chris-wilson.co.uk register lookup") (cherry picked from commit 2f265fad9756a40c09e3f4dcc62d5d7fa73a9fb2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changingImre Deak
Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602c815 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com (cherry picked from commit e76019a81921e87a4d9e7b3d86102bc708a6c227) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/gvt: Use KVM r/w to access guest opregionTina Zhang
For KVMGT, the guest opregion, which is handled by VFIO, is actually a piece of guest memory which won't be accessed by devices. So, its mfn shouldn't be obtained through VFIO interface. This patch uses KVM r/w interface to access the data in guest opregion. Fix the guest opregion accessing issue when host "intel_iommu=on". v3: - Remove mapped flag for KVM/VFIO usage, as it's useless for KVM. v2: - Set the gpa correctly when invoking KVM r/w operations. (Zhenyu) Signed-off-by: Tina Zhang <tina.zhang@intel.com> Cc: Yan Zhao <yan.y.zhao@intel.com> Cc: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=onChangbin Du
When add 'x-no-mmap=on' for vfio-pci option, aperture access in guest is emulated. But the vgpu_aperture_rw() function take wrong offset when do memcpy, since vgpu->gm.aperture_va is not the base of entire aperture. This mistake cause GPU command in guest get lost and so the seqno is not updated in engine HWSP. This patch fix this, and it also move the emulation code to kvmgt. Because only vfio need to emulate it. Put aperture rw to MMIO emulation path breaks assumptions in xengt. v2: Remove PAGE_ALIGN for size (zhenyu) Fixes: f090a00df9ec ("drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach") Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/gvt: only reset execlist state of one engine during VM engine resetWeinan Li
Only reset vgpu execlist state of the exact engine which gets reset request from VM. After read context status from HWSP enabled, KMD will use the saved CSB read pointer but not always read from MMIO. When one engine reset happen, only the read pointer of this engine will be reset, in GVT-g host side also need to align with this policy, otherwise VM may get wrong CSB status after one engine reset compeleted. v2: Split refine and fix patch, code refine(Zhenyu) v3: Move active flag of vgpu scheduler into sched_data(Zhenyu) Cc: Fred Gao <fred.gao@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-06drm/i915/gvt: refine intel_vgpu_submission_ops as per engine opsWeinan Li
Using per engine ops will be more flexible, here refine sub-ops(init, clean) as per engine operation align with reset operation. This change also will be used in next fix patch for VM engine reset. Cc: Fred Gao <fred.gao@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This seems to have been a comparatively quieter merge window, I assume due to holidays etc. The "biggest" change is AMD header cleanups, which merge/remove a bunch of them. The AMD gpu scheduler is now being made generic with the etnaviv driver wanting to reuse the code, hopefully other drivers can go in the same direction. Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff elsewhere. Core: - Add .last_close and .output_poll_changed helpers to reduce driver footprints - Fix plane clipping - Improved debug printing support - Add panel orientation property - Update edid derived properties at edid setting - Reduction in fbdev driver footprint - Move amdgpu scheduler into core for other drivers to use. i915: - Selftest and IGT improvements - Fast boot prep work on IPS, pipe config - HW workarounds for Cannonlake, Geminilake - Cannonlake clock and HDMI2.0 fixes - GPU cache invalidation and context switch improvements - Display planes cleanup - New PMU interface for perf queries - New firmware support for KBL/SKL - Geminilake HW workaround for perforamce - Coffeelake stolen memory improvements - GPU reset robustness work - Cannonlake horizontal plane flipping - GVT work amdgpu/radeon: - RV and Vega header file cleanups (lots of lines gone!) - TTM operation context support - 48-bit GPUVM support for Vega/RV - ECC support for Vega - Resizeable BAR support - Multi-display sync support - Enable swapout for reserved BOs during allocation - S3 fixes on Raven - GPU reset cleanup and fixes - 2+1 level GPU page table amdkfd: - GFX7/8 SDMA user queues support - Hardware scheduling for multiple processes - dGPU prep work rcar: - Added R8A7743/5 support - System suspend/resume support sun4i: - Multi-plane support for YUV formats - A83T and LVDS support msm: - Devfreq support for GPU tegra: - Prep work for adding Tegra186 support - Tegra186 HDMI support - HDMI2.0 and zpos support by using generic helpers tilcdc: - Misc fixes omapdrm: - Support memory bandwidth limits - DSI command mode panel cleanups - DMM error handling exynos: - drop the old IPP subdriver. etnaviv: - Occlusion query fixes - Job handling fixes - Prep work for hooking in gpu scheduler armada: - Move closer to atomic modesetting - Allow disabling primary plane if overlay is full screen imx: - Format modifier support - Add tile prefetch to PRE - Runtime PM support for PRG ast: - fix LUT loading" * tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits) drm/ast: Load lut in crtc_commit drm: Check for lessee in DROP_MASTER ioctl drm: fix gpu scheduler link order drm/amd/display: Demote error print to debug print when ATOM impl missing dma-buf: fix reservation_object_wait_timeout_rcu once more v2 drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) drm/amd/amdgpu: Add Polaris version check drm/amdgpu: Reenable manual GPU reset from sysfs drm/amdgpu: disable MMHUB power gating on raven drm/ttm: Don't unreserve swapped BOs that were previously reserved drm/ttm: Don't add swapped BOs to swap-LRU list drm/amdgpu: only check for ECC on Vega10 drm/amd/powerplay: Fix smu_table_entry.handle type drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/radeon: fill in rb backend map on evergreen/ni. drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2) drm/ttm: only free pages rather than update global memory count together drm/amdgpu: fix CPU based VM updates drm/amdgpu: fix typo in amdgpu_vce_validate_bo ...
2018-02-01Merge tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy) - Capability helper cleanup (Alex Williamson) - Allow mmaps overlapping MSI-X vector table with region capability exposing this feature (Alexey Kardashevskiy) - mdev static cleanups (Xiongwei Song) * tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio: vfio: mdev: make a couple of functions and structure vfio_mdev_driver static vfio-pci: Allow mapping MSIX BAR vfio: Simplify capability helper vfio-pci: Mask INTx if a device is not capabable of enabling it
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-02-01drm/i915/ppgtt: Pin page directories before allocationChris Wilson
Commit e2b763caa6eb ("drm/i915: Remove bitmap tracking for used-pdpes") believed that because it did not insert its freshly allocated page directory into the pd tree, it was safe from the shrinker. I failed to heed the lesson learnt from commit dd19674bacba ("drm/i915: Remove bitmap tracking for used-ptes") that we need to pin all the levels in the tree before hitting the shrinker or else the shrinker may free an upper layer as we proceed to allocate the tree. Thus leaving dangling pointers everywhere and a GPF should we hit direct reclaim at just the wrong moment. CPU: 0 PID: 7374 Comm: chromium Tainted: P O 4.14.13-1-ARCH #1 Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B33.1706181928 06/18/2017 task: ffff994f696c2c40 task.stack: ffffb1a789d4c000 RIP: 0010:gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: 0018:ffffb1a789d4f940 EFLAGS: 00010206 RAX: 81c1788cc4f68138 RBX: ffff994f54db8000 RCX: ffff994f696c2c40 RDX: 000000023bc73003 RSI: ffff994d598b6b80 RDI: ffff994f54db8000 RBP: ffff994d598b6b80 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb1a789d4f550 R11: ffff994eaf3c3208 R12: 0000000000000027 R13: 0000000000005000 R14: 0000000004e8f000 R15: ffff994f54dba000 FS: 00007f585886aa00(0000) GS:ffff994faec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004ac8e8 CR3: 00000002552c8004 CR4: 00000000003606f0 Call Trace: gen8_ppgtt_alloc_pdp+0x178/0x320 [i915] gen8_ppgtt_alloc_4lvl+0x5f/0x150 [i915] ppgtt_bind_vma+0x30/0x70 [i915] i915_vma_bind+0x68/0xd0 [i915] __i915_vma_do_pin+0x2d6/0x3a0 [i915] eb_lookup_vmas+0x7a2/0xb50 [i915] i915_gem_do_execbuffer+0x4d7/0x10e0 [i915] ? sock_wfree+0x34/0x60 ? unix_stream_read_generic+0x1f9/0x7e0 ? import_iovec+0x37/0xd0 ? i915_gem_execbuffer2+0x5d/0x390 [i915] i915_gem_execbuffer2+0x1b7/0x390 [i915] ? i915_gem_execbuffer+0x2d0/0x2d0 [i915] drm_ioctl_kernel+0x59/0xb0 [drm] drm_ioctl+0x2d5/0x370 [drm] ? i915_gem_execbuffer+0x2d0/0x2d0 [i915] ? __seccomp_filter+0x3b/0x260 do_vfs_ioctl+0xa1/0x610 ? syscall_trace_enter+0xdb/0x2b0 SyS_ioctl+0x74/0x80 do_syscall_64+0x55/0x110 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f584fa82d27 RSP: 002b:00007ffee14a7828 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000003b0126a1030 RCX: 00007f584fa82d27 RDX: 00007ffee14a7870 RSI: 0000000040406469 RDI: 0000000000000080 RBP: 00007ffee14a7870 R08: 0000000000000002 R09: 0000000000000077 R10: 00007f5839f2b780 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000080 R14: 00007f5842b00040 R15: 0000000000000000 Code: 01 00 83 81 58 0a 00 00 01 48 2b 05 13 9d fd c9 48 c1 f8 06 48 c1 e0 0c 48 8d 04 d0 48 8b 56 08 48 03 05 0c 9d fd c9 48 83 ca 03 <48> 89 10 83 a9 58 0a 00 00 01 65 ff 0d 37 03 fb 3e 74 02 f3 c3 RIP: gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: ffffb1a789d4f940 Reported-by: Eric Blau <eblau@eblau.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104773 Fixes: e2b763caa6eb ("drm/i915: Remove bitmap tracking for used-pdpes") References: dd19674bacba ("drm/i915: Remove bitmap tracking for used-ptes") Testcase: igt/drv_selftest/live_gtt (igt_ppgtt_shrink_boom) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180131214440.7141-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com> (cherry picked from commit b715a2f0c7714a399e7f8e951cc8dea9cd4eeb4b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915: Always run hangcheck while the GPU is busyChris Wilson
Previously, we relied on only running the hangcheck while somebody was waiting on the GPU, in order to minimise the amount of time hangcheck had to run. (If nobody was watching the GPU, nobody would notice if the GPU wasn't responding -- eventually somebody would care and so kick hangcheck into action.) However, this falls apart from around commit 4680816be336 ("drm/i915: Wait first for submission, before waiting for request completion"), as not all waiters declare themselves to hangcheck and so we could switch off hangcheck and miss GPU hangs even when waiting under the struct_mutex. If we enable hangcheck from the first request submission, and let it run until the GPU is idle again, we forgo all the complexity involved with only enabling around waiters. We just have to remember to be careful that we do not declare a GPU hang when idly waiting for the next request to be come ready, as we will run hangcheck continuously even when the engines are stalled waiting for external events. This should be true already as we should only be tracking requests submitted to hardware for execution as an indicator that the engine is busy. Fixes: 4680816be336 ("drm/i915: Wait first for submission, before waiting for request completion" Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180129144104.3921-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 889230489b6b138ba97ba2f13fc9644a3d16d0d2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01Revert "drm/i915: mark all device info struct with __initconst"Lionel Landwerlin
This reverts commit 5b54eddd3920e9f6f1a6d972454baf350cbae77e. Conflicts: drivers/gpu/drm/i915/i915_pci.c Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104805 Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 5b54eddd3920 ("drm/i915: mark all device info struct with __initconst") Link: https://patchwork.freedesktop.org/patch/msgid/20180129083346.29173-1-lionel.g.landwerlin@intel.com (cherry picked from commit 5db47e37b38755c5e26e6b8fbc1a32ce73495940) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/edp: Do not do link training fallback or prune modes on EDPManasi Navare
In case of eDP because the panel has a fixed mode, the link rate and lane count at which it is trained corresponds to the link BW required to support the native resolution of the panel. In case of panles with lower resolutions where fewer lanes are hooked up internally, that number is reflected in the MAX_LANE_COUNT DPCD register of the panel. So it is pointless to fallback to lower link rate/lane count in case of link training failure on eDP connector since the lower link BW will not support the native resolution of the panel and we cannot prune the preferred mode on the eDP connector. In case of Link training failure on the eDP panel, something is wrong in the HW internally and hence driver errors out with a loud and clear DRM_ERROR message. v2: * Fix the DEBUG_ERROR and add {} in else (Ville Syrjala) Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=103369 Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507835618-23051-1-git-send-email-manasi.d.navare@intel.com (cherry picked from commit c0cfb10d9e1de490e36d3b9d4228c0ea0ca30677) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915: Check for fused or unused pipesMika Kahola
We may have fused or unused pipes in our system. Let's check that the pipe in question is within limits of accessible pipes. In case, that we are not able to access the pipe, we return early with a warning. v2: Rephrasing of the commit message (Jani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206 Reported-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jaswinder Singh Rajput <jaswinder@perfectintelligent.com> Suggested-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1513584243-12607-1-git-send-email-mika.kahola@intel.com (cherry picked from commit 0b7029b7e43fda1304c181a3ade0b429b9edcd9d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.10+
2018-02-01drm/i915: Protect WC stash allocation against direct reclaimChris Wilson
As we attempt to allocate pages for use in a new WC stash, direct reclaim may run underneath us and fill up the WC stash. We have to be careful then not to overflow the pvec. Fixes: 66df1014efba ("drm/i915: Keep a small stash of preallocated WC pages") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103109 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180121173143.17090-1-chris@chris-wilson.co.uk (cherry picked from commit 073cd7816685ac77c6d8b4d321a5586c9177b76a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915: Only attempt to scan the requested number of shrinker slabsChris Wilson
Since commit 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned"), we track the number of objects we scan and do not wish to exceed that as it will overly penalise our own slabs under mempressure. Given that we now know the target number of objects to scan, use that as our guide for deciding to shrink as opposed to the number of objects we manage to shrink (which doesn't correspond to the numbers we report to shrinkctl). Fixes: 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180115212455.24046-2-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit 29d384e34c55d696cf37bd4159e05f4b14d45da0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915: Always call to intel_display_set_init_power() in resume_early.Maarten Lankhorst
intel_power_domains_init_hw() calls set_init_power, but when using runtime power management this call is skipped. This prevents hw readout from taking place. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104172 Link: https://patchwork.freedesktop.org/patch/msgid/20180116155324.75120-1-maarten.lankhorst@linux.intel.com Fixes: bc87229f323e ("drm/i915/skl: enable PC9/10 power states during suspend-to-idle") Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit ac25dfed15d470d7f23dd817e965b54aa3f94a1e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/gvt: cancel scheduler timer when no vGPU existsZhenyu Wang
Stop gvt scheduler timer if no vGPU exists, otherwise it keeps gvt service thread busy to handle request schedule event but no actual schedule activity required. Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/gvt: cancel virtual vblank timer when no vGPU existsZhenyu Wang
Stop irq timer for virtual vblank timer emulation if no vGPU exists, otherwise it will keep gvt service thread busy to handle virtual vblank but no use. Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/gvt: Keep obj->dma_buf link NULL during exportingTina Zhang
According to commit (319c933c71f3dbdb2b3274d1634d3494c70efa06) Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Aug 15 00:02:46 2013 +0200 drm/prime: proper locking+refcounting for obj->dma_buf link obj->dma_buf link should be reinstated at import time. Gvt-g dma-buf buffer exposeing might be simpler, as there won't be much racing during Gvt-g dma-buf exposing. In other words, Gvt-g dma-buf exposing can guarantee exposing happens before gem close ioctl, and Gvt-g is the only exporter of the guest framebuffer. But following the drm prime scheme can give Gvt-g a chance to increase a dma-buf reference count during importing. Otherwise, we have to increase the reference during exposing, which will break the case that the only reference userspace has held was through the dma-buf fd and the reference count is one. Signed-off-by: Tina Zhang <tina.zhang@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Hang Yuan <hang.yuan@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/pmu: Reconstruct active state on starting busy-statsChris Wilson
We have a hole in our busy-stat accounting if the pmu is enabled during a long running batch, the pmu will not start accumulating busy-time until the next context switch. This then fails tests that are only sampling a single batch. v2: Count each active port just once (context in/out events are only on the first and last assignment to a port). v3: Avoid hardcoding knowledge of 2 submission ports Fixes: 30e17b7847f5 ("drm/i915: Engine busy time tracking") Testcase: igt/perf_pmu/busy-start Testcase: igt/perf_pmu/busy-double-start Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180111073031.14614-1-chris@chris-wilson.co.uk (cherry picked from commit 4900727d35bb20028f9bd83146ec4bf78afffe30) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915: Stop getting the fault address from RING_FAULT_REGOscar Mateo
This register does not contain it. Instead, we have to look into FAULT_TLB_DATA0 & 1 (where, by the way, we can also get the address space). v2: Right formatting v3: - Use 12 (as per the register format) instead of PAGE_SIZE (Chris) - s/BITS_44_TO_47/HIGHBITS (Chris) - Right formatting, this time for real Fixes: b03ec3d67ab8 ("drm/i915: There is only one fault register from GEN8 onwards") Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1513982329-32191-1-git-send-email-oscar.mateo@intel.com Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 5a3f58dfd1420347be838546e00a4a9e847bda30) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/guc: Add uc_fini_wq in gem_init unwind pathSagar Arun Kamble
While moving code around for solving lockdep issue for GuC log relay, spotted that uc_fini_wq is not being called in failure path in gem_init. Missed in the below commit. Add it. v2: Removed GEM_BUG_ON(!HAS_GUC()) from intel_uc_fini_wq as init happens only based on enable_guc module parameter and does not consider has_guc capability. (Michal) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Fixes: 3176ff49bc3e ("drm/i915/guc: Move GuC workqueue allocations outside of the mutex") Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1515588857-10283-1-git-send-email-sagar.a.kamble@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit da943b5ab071584fcb9cfa896dc8c643d376f362) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915: Fix using BIT_ULL() vs. BIT() for power domain masksImre Deak
The power domain masks are 64 bit wide, so we need BIT_ULL() when setting bits in them, these ones were missed during converting from 32 to 64 bit masks. All 3 enums are <32 atm, so this didn't cause a real problem. Fixes: d8fc70b7367b ("drm/i915: Make power domain masks 64 bit long") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109122040.19425-1-imre.deak@intel.com (cherry picked from commit 17bd6e66d8f677b1b250d098097fbed6e70175ef) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915: Try EDID bitbanging on HDMI after failed readStefan Brüns
The ACK/NACK implementation as found in e.g. the G965 has the falling clock edge and the release of the data line after the ACK for the received byte happen at the same time. This is conformant with the I2C specification, which allows a zero hold time, see footnote [3]: "A device must internally provide a hold time of at least 300 ns for the SDA signal (with respect to the V IH(min) of the SCL signal) to bridge the undefined region of the falling edge of SCL." Some HDMI-to-VGA converters apparently fail to adhere to this requirement and latch SDA at the falling clock edge, so instead of an ACK sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the transfer. The bitbanging releases the data line for the ACK only 1/4 bit time after the falling clock edge, so a slave will see the correct value no matter if it samples at the rising or the falling clock edge or in the center. Fallback to bitbanging is already done for the CRT connector. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685 Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de (cherry picked from commit cfb926e148e99acc02351d72e8b85e32b5f786ef) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/glk: Disable Guc and HuC on GLKAnusha Srivatsa
Since the firmwares are not yet released to public repo, disable them on Geminilake. v2: Remove the firmware versions (Michal) v3: Remove unwanted defines (Rodrigo) Correct commit message (Michal) Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Fixes: 90f192c8241e ("drm/i915/GuC/GLK: Load GuC on GLK") Fixes: db5ba0d8931e ("drm/i915/GLK/HuC: Load HuC on GLK") Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1515006225-13003-1-git-send-email-anusha.srivatsa@intel.com (cherry picked from commit a76050a4837860fcadb6ca11d69d41e08f4090d8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/gvt: Do not use I915_NUM_ENGINES to iterate over the mocs regs arrayMichel Thierry
The mocs reg array is defined locally but then we iterate over its elements using I915_NUM_ENGINES. There is no 'hard' connection between I915_NUM_ENGINES and the regs array and there will be problems if either of them increases. Use the size of the mocs reg array instead to safely iterate over it. Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Weinan Li <weinan.z.li@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/gvt: validate gfn before set shadow page entryHang Yuan
GVT may receive partial write on one guest PTE update. Validate gfn not to translate incomplete gfn. This avoids some unnecessary error messages incurred by the incomplete gfn translating. Also fix the bug that the whole PPGTT shadow page update is aborted on any invalid gfn entry. gfn validation relys on hypervisor's help. Add one MPT module function to provide the function. Signed-off-by: Hang Yuan <hang.yuan@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/gvt: add PLANE_KEYMAX regs to mmio track listPei Zhang
Running 4.15 Linux kernel in VM will cause host GVT reports 'untrack mmio 0x701a0' errror, which identifies the PLANE_KEYMAX registers. Add them to track list. v2: rebase to latest staging code. Signed-off-by: Pei Zhang <pei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-01drm/i915/gvt: Fix gen8/9_render_mmio_list[0] don't take effectXiong Zhang
while(mmio++) increase mmio to next, mmio[0] never take effect in while loop. This patch change while to for and fix the above issue. v2: Correct Fixes format.(Zhenyu) v3: Rebase to latest staging.(Zhenyu) Fixes: 83164886e455("drm/i915/gvt: Select appropriate mmio list at initialization time") Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-18BackMerge tag 'v4.15-rc8' into drm-nextDave Airlie
Linux 4.15-rc8 Daniel requested this for so the intel CI won't fall over on drm-next so often.
2018-01-15drm/i915: Fix deadlock in i830_disable_pipe()Ville Syrjälä
i830_disable_pipe() gets called from the power well code, and thus we're already holding the power domain mutex. That means we can't call plane->get_hw_state() as it will also try to grab the same mutex and will thus deadlock. Replace the assert_plane() calls (which calls ->get_hw_state()) with just raw register reads in i830_disable_pipe(). As a bonus we can now get a warning if plane C is enabled even though we don't even expose it as a drm plane. v2: Do a separate WARN_ON() for each plane (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: d87ce7640295 ("drm/i915: Add .get_hw_state() method for planes") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129125411.29055-1-ville.syrjala@linux.intel.com (cherry picked from commit 5816d9cbc0a0fbf232fe297cefcb85361a3cde90) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-15drm/i915: Redo plane sanitation during readoutVille Syrjälä
Unify the plane disabling during state readout by pulling the code into a new helper intel_plane_disable_noatomic(). We'll also read out the state of all planes, so that we know which planes really need to be diabled. Additonally we change the plane<->pipe mapping sanitation to work by simply disabling the offending planes instead of entire pipes. And we do it before we otherwise sanitize the crtcs, which means we don't have to worry about misassigned planes during crtc sanitation anymore. v2: Reoder patches to not depend on enum old_plane_id v3: s/for_each_pipe/for_each_intel_crtc/ Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103223 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-3-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit b1e01595a66dc206a2c75401ec4c285740537f3f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-15drm/i915: Add .get_hw_state() method for planesVille Syrjälä
Add a .get_hw_state() method for planes, returning true or false depending on whether the plane is enabled. Use it to rewrite the plane enabled/disabled asserts in platform agnostic fashion. We do lose the pre-gen4 plane<->pipe mapping checks, but since we're supposed sanitize that anyway it doesn't really matter. v2: Reoder patches to not depend on enum old_plane_id Just call assert_plane_disabled() from assert_planes_disabled() v3: Deal with disabled power wells in .get_hw_state() v4: Rebase due skl primary plane code removal Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alex Villacís Lasso <alexvillacislasso@hotmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Tested-by: Thierry Reding <thierry.reding@gmail.com> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20171117191917.11506-2-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 51f5a096398433a881e845d3685a2c1dac756019) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-11drm/i915: Don't adjust priority on an already signaled fenceChris Wilson
When we retire a signaled fence, we free the dependency tree. However, we skip clearing the list so that if we then try to adjust the priority of the signaled fence, we may walk the list of freed dependencies. [ 3083.156757] ================================================================== [ 3083.156806] BUG: KASAN: use-after-free in execlists_schedule+0x199/0x660 [i915] [ 3083.156810] Read of size 8 at addr ffff8806bf20f400 by task Xorg/831 [ 3083.156815] CPU: 0 PID: 831 Comm: Xorg Not tainted 4.15.0-rc6-no-psn+ #1 [ 3083.156817] Hardware name: Notebook N24_25BU/N24_25BU, BIOS 5.12 02/17/2017 [ 3083.156818] Call Trace: [ 3083.156823] dump_stack+0x5c/0x7a [ 3083.156827] print_address_description+0x6b/0x290 [ 3083.156830] kasan_report+0x28f/0x380 [ 3083.156872] ? execlists_schedule+0x199/0x660 [i915] [ 3083.156914] execlists_schedule+0x199/0x660 [i915] [ 3083.156956] ? intel_crtc_atomic_check+0x146/0x4e0 [i915] [ 3083.156997] ? execlists_submit_request+0xe0/0xe0 [i915] [ 3083.157038] ? i915_vma_misplaced.part.4+0x25/0xb0 [i915] [ 3083.157079] ? __i915_vma_do_pin+0x7c8/0xc80 [i915] [ 3083.157121] ? intel_atomic_state_alloc+0x44/0x60 [i915] [ 3083.157130] ? drm_atomic_helper_page_flip+0x3e/0xb0 [drm_kms_helper] [ 3083.157145] ? drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157159] ? drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157172] ? drm_ioctl+0x45b/0x560 [drm] [ 3083.157211] i915_gem_object_wait_priority+0x14c/0x2c0 [i915] [ 3083.157251] ? i915_gem_get_aperture_ioctl+0x150/0x150 [i915] [ 3083.157290] ? i915_vma_pin_fence+0x1d8/0x320 [i915] [ 3083.157331] ? intel_pin_and_fence_fb_obj+0x175/0x250 [i915] [ 3083.157372] ? intel_rotation_info_size+0x60/0x60 [i915] [ 3083.157413] ? intel_link_compute_m_n+0x80/0x80 [i915] [ 3083.157428] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157443] ? drm_dev_printk+0x1b0/0x1b0 [drm] [ 3083.157485] intel_prepare_plane_fb+0x2f8/0x5a0 [i915] [ 3083.157527] ? intel_crtc_get_vblank_counter+0x80/0x80 [i915] [ 3083.157536] drm_atomic_helper_prepare_planes+0xa0/0x1c0 [drm_kms_helper] [ 3083.157587] intel_atomic_commit+0x12e/0x4e0 [i915] [ 3083.157605] drm_atomic_helper_page_flip+0xa2/0xb0 [drm_kms_helper] [ 3083.157621] drm_mode_page_flip_ioctl+0x7d2/0x850 [drm] [ 3083.157638] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157652] ? drm_lease_owner+0x1a/0x30 [drm] [ 3083.157668] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157681] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157696] drm_ioctl+0x45b/0x560 [drm] [ 3083.157711] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm] [ 3083.157725] ? drm_getstats+0x20/0x20 [drm] [ 3083.157729] ? timerqueue_del+0x49/0x80 [ 3083.157732] ? __remove_hrtimer+0x62/0xb0 [ 3083.157735] ? hrtimer_try_to_cancel+0x173/0x210 [ 3083.157738] do_vfs_ioctl+0x13b/0x880 [ 3083.157741] ? ioctl_preallocate+0x140/0x140 [ 3083.157744] ? _raw_spin_unlock_irq+0xe/0x30 [ 3083.157746] ? do_setitimer+0x234/0x370 [ 3083.157750] ? SyS_setitimer+0x19e/0x1b0 [ 3083.157752] ? SyS_alarm+0x140/0x140 [ 3083.157755] ? __rcu_read_unlock+0x66/0x80 [ 3083.157757] ? __fget+0xc4/0x100 [ 3083.157760] SyS_ioctl+0x74/0x80 [ 3083.157763] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157765] RIP: 0033:0x7f6135d0c6a7 [ 3083.157767] RSP: 002b:00007fff01451888 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 3083.157769] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f6135d0c6a7 [ 3083.157771] RDX: 00007fff01451950 RSI: 00000000c01864b0 RDI: 000000000000000c [ 3083.157772] RBP: 00007f613076f600 R08: 0000000000000001 R09: 0000000000000000 [ 3083.157773] R10: 0000000000000060 R11: 0000000000003246 R12: 0000000000000000 [ 3083.157774] R13: 0000000000000060 R14: 000000000000001b R15: 0000000000000060 [ 3083.157779] Allocated by task 831: [ 3083.157783] kmem_cache_alloc+0xc0/0x200 [ 3083.157822] i915_gem_request_await_dma_fence+0x2c4/0x5d0 [i915] [ 3083.157861] i915_gem_request_await_object+0x321/0x370 [i915] [ 3083.157900] i915_gem_do_execbuffer+0x1165/0x19c0 [i915] [ 3083.157937] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.157950] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.157962] drm_ioctl+0x45b/0x560 [drm] [ 3083.157964] do_vfs_ioctl+0x13b/0x880 [ 3083.157966] SyS_ioctl+0x74/0x80 [ 3083.157968] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.157971] Freed by task 831: [ 3083.157973] kmem_cache_free+0x77/0x220 [ 3083.158012] i915_gem_request_retire+0x72c/0xa70 [i915] [ 3083.158051] i915_gem_request_alloc+0x1e9/0x8b0 [i915] [ 3083.158089] i915_gem_do_execbuffer+0xa96/0x19c0 [i915] [ 3083.158127] i915_gem_execbuffer2+0x1ad/0x550 [i915] [ 3083.158140] drm_ioctl_kernel+0xa7/0xf0 [drm] [ 3083.158153] drm_ioctl+0x45b/0x560 [drm] [ 3083.158155] do_vfs_ioctl+0x13b/0x880 [ 3083.158156] SyS_ioctl+0x74/0x80 [ 3083.158158] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 3083.158162] The buggy address belongs to the object at ffff8806bf20f400 which belongs to the cache i915_dependency of size 64 [ 3083.158166] The buggy address is located 0 bytes inside of 64-byte region [ffff8806bf20f400, ffff8806bf20f440) [ 3083.158168] The buggy address belongs to the page: [ 3083.158171] page:00000000d43decc4 count:1 mapcount:0 mapping: (null) index:0x0 [ 3083.158174] flags: 0x17ffe0000000100(slab) [ 3083.158179] raw: 017ffe0000000100 0000000000000000 0000000000000000 0000000180200020 [ 3083.158182] raw: ffffea001afc16c0 0000000500000005 ffff880731b881c0 0000000000000000 [ 3083.158184] page dumped because: kasan: bad access detected [ 3083.158187] Memory state around the buggy address: [ 3083.158190] ffff8806bf20f300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158192] ffff8806bf20f380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158195] >ffff8806bf20f400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158196] ^ [ 3083.158199] ffff8806bf20f480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158201] ffff8806bf20f500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3083.158203] ================================================================== Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reported-by: Mike Keehan <mike@keehan.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104436 Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180106105618.13532-1-chris@chris-wilson.co.uk (cherry picked from commit c218ee03b9315073ce43992792554dafa0626eb8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-11drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.Kenneth Graunke
Geminilake requires the 3D driver to select whether barriers are intended for compute shaders, or tessellation control shaders, by whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when switching pipelines. Failure to do this properly can result in GPU hangs. Unfortunately, this means it needs to switch mid-batch, so only userspace can properly set it. To facilitate this, the kernel needs to whitelist the register. The workarounds page currently tags this as applying to Broxton only, but that doesn't make sense. The documentation for the register it references says the bit userspace is supposed to toggle only exists on Geminilake. Empirically, the Mesa patch to toggle this bit appears to fix intermittent GPU hangs in tessellation control shader barrier tests on Geminilake; we haven't seen those hangs on Broxton. v2: Mention WA #0862 in the comment (it doesn't have a name). Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180105085905.9298-1-kenneth@whitecape.org (cherry picked from commit ab062639edb0412daf6de540725276b9a5d217f9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-01-09treewide: Use DEVICE_ATTR_ROJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09treewide: Use DEVICE_ATTR_RWJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_RW where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(\s*S_IRUGO\s*\|\s*S_IWUSR|\s*S_IWUSR\s*\|\s*S_IRUGO\s*|\s*0644\s*)\)?\s*,\s*\1_show\s*,\s*\1_store\s*\)/DEVICE_ATTR_RW(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08Merge tag 'gvt-fixes-2018-01-08' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2018-01-08 - clear shadow entry for post-sync (Zhi) - fix stack out-of-bound warning in cmd parser (Changbin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180108061130.ucwtumhpbfbu4psu@zhen-hp.sh.intel.com
2018-01-08drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parserChangbin Du
for_each_set_bit() only accepts variable of type unsigned long, and we can not cast it from smaller types. [ 16.499365] ================================================================== [ 16.506655] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x1d/0x70 [ 16.513313] Read of size 8 at addr ffff8803616cf510 by task systemd-udevd/180 [ 16.521998] CPU: 0 PID: 180 Comm: systemd-udevd Tainted: G U O 4.15.0-rc3+ #14 [ 16.530317] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 16.537760] Call Trace: [ 16.540230] dump_stack+0x7c/0xbb [ 16.543569] print_address_description+0x6b/0x290 [ 16.548306] kasan_report+0x28a/0x370 [ 16.551993] ? find_first_bit+0x1d/0x70 [ 16.555858] find_first_bit+0x1d/0x70 [ 16.559625] intel_gvt_init_cmd_parser+0x127/0x3c0 [i915] [ 16.565060] ? __lock_is_held+0x8f/0xf0 [ 16.568990] ? intel_gvt_clean_cmd_parser+0x10/0x10 [i915] [ 16.574514] ? __hrtimer_init+0x5d/0xb0 [ 16.578445] intel_gvt_init_device+0x2c3/0x690 [i915] [ 16.583537] ? unregister_module_notifier+0x20/0x20 [ 16.588515] intel_gvt_init+0x89/0x100 [i915] [ 16.592962] i915_driver_load+0x1992/0x1c70 [i915] [ 16.597846] ? __i915_printk+0x210/0x210 [i915] [ 16.602410] ? wait_for_completion+0x280/0x280 [ 16.606883] ? lock_downgrade+0x2c0/0x2c0 [ 16.610923] ? __pm_runtime_resume+0x46/0x90 [ 16.615238] ? acpi_dev_found+0x76/0x80 [ 16.619162] ? i915_pci_remove+0x30/0x30 [i915] [ 16.623733] local_pci_probe+0x74/0xe0 [ 16.627518] pci_device_probe+0x208/0x310 [ 16.631561] ? pci_device_remove+0x100/0x100 [ 16.635871] ? __list_add_valid+0x29/0xa0 [ 16.639919] driver_probe_device+0x40b/0x6b0 [ 16.644223] ? driver_probe_device+0x6b0/0x6b0 [ 16.648696] __driver_attach+0x11d/0x130 [ 16.652649] bus_for_each_dev+0xe7/0x160 [ 16.656600] ? subsys_dev_iter_exit+0x10/0x10 [ 16.660987] ? __list_add_valid+0x29/0xa0 [ 16.665028] bus_add_driver+0x31d/0x3a0 [ 16.668893] driver_register+0xc6/0x170 [ 16.672758] ? 0xffffffffc0ad8000 [ 16.676108] do_one_initcall+0x9c/0x206 [ 16.679984] ? initcall_blacklisted+0x150/0x150 [ 16.684545] ? do_init_module+0x35/0x33b [ 16.688494] ? kasan_unpoison_shadow+0x31/0x40 [ 16.692968] ? kasan_kmalloc+0xa6/0xd0 [ 16.696743] ? do_init_module+0x35/0x33b [ 16.700694] ? kasan_unpoison_shadow+0x31/0x40 [ 16.705168] ? __asan_register_globals+0x82/0xa0 [ 16.709819] do_init_module+0xe7/0x33b [ 16.713597] load_module+0x4481/0x4ce0 [ 16.717397] ? module_frob_arch_sections+0x20/0x20 [ 16.722228] ? vfs_read+0x13b/0x190 [ 16.725742] ? kernel_read+0x74/0xa0 [ 16.729351] ? get_user_arg_ptr.isra.17+0x70/0x70 [ 16.734099] ? SYSC_finit_module+0x175/0x1b0 [ 16.738399] SYSC_finit_module+0x175/0x1b0 [ 16.742524] ? SYSC_init_module+0x1e0/0x1e0 [ 16.746741] ? __fget+0x157/0x240 [ 16.750090] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 16.754747] entry_SYSCALL_64_fastpath+0x23/0x9a [ 16.759397] RIP: 0033:0x7f8fbc837499 [ 16.762996] RSP: 002b:00007ffead76c138 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 16.770618] RAX: ffffffffffffffda RBX: 0000000000000012 RCX: 00007f8fbc837499 [ 16.777800] RDX: 0000000000000000 RSI: 000056484e67b080 RDI: 0000000000000012 [ 16.784979] RBP: 00007ffead76b140 R08: 0000000000000000 R09: 0000000000000021 [ 16.792164] R10: 0000000000000012 R11: 0000000000000246 R12: 000056484e67b460 [ 16.799345] R13: 00007ffead76b120 R14: 0000000000000005 R15: 0000000000000000 [ 16.808052] The buggy address belongs to the page: [ 16.812876] page:00000000dc4b8c1e count:0 mapcount:0 mapping: (null) index:0x0 [ 16.820934] flags: 0x17ffffc0000000() [ 16.824621] raw: 0017ffffc0000000 0000000000000000 0000000000000000 00000000ffffffff [ 16.832416] raw: ffffea000d85b3e0 ffffea000d85b3e0 0000000000000000 0000000000000000 [ 16.840208] page dumped because: kasan: bad access detected [ 16.847318] Memory state around the buggy address: [ 16.852143] ffff8803616cf400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.859427] ffff8803616cf480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 [ 16.866708] >ffff8803616cf500: f1 f1 04 f4 f4 f4 f3 f3 f3 f3 00 00 00 00 00 00 [ 16.873988] ^ [ 16.877770] ffff8803616cf580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.885042] ffff8803616cf600: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 16.892312] ================================================================== Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-01-04drm/i915: Apply Display WA #1183 on skl, kbl, and cflLucas De Marchi
Display WA #1183 was recently added to workaround "Failures when enabling DPLL0 with eDP link rate 2.16 or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz (CDCLK_CTL CD Frequency Select 10b or 11b) used in this enabling or in previous enabling." This workaround was designed to minimize the impact only to save the bad case with that link rates. But HW engineers indicated that it should be safe to apply broadly, although they were expecting the DPLL0 link rate to be unchanged on runtime. We need to cover 2 cases: when we are in fact enabling DPLL0 and when we are just changing the frequency with small differences. This is based on previous patch by Rodrigo Vivi with suggestions from Ville Syrjälä. Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com (cherry picked from commit 53421c2fe99ce16838639ad89d772d914a119a49) [ Lucas: Backport to 4.15 adding back variable that has been removed on commits not meant to be backported ] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180102201837.6812-1-lucas.demarchi@intel.com
2018-01-04drm/i915/gvt: Clear the shadow page table entry after post-syncZhi Wang
A shadow page table entry needs to be cleared after being set as post-sync. This patch fixes the recent error reported in Win7-32 test. Fixes: 2707e4446688 ("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-01-02drm/i915: Put all non-blocking modesets onto an ordered wqVille Syrjälä
We have plenty of global registers and whatnot programmed without any further locking by the modeset code. Currently non-bocking modesets are allowed to execute in parallel which could corrupt said registers. To avoid the problem let's run all non-blocking modesets on an ordered workqueue. We still put page flips etc. to system_unbound_wq allowing page flips on one pipe to execute in parallel with page flips or a modeset on a another pipe (assuming no known state is shared between them, at which point they would have been added to the same atomic commit and serialized that way). Blocking modesets are already serialized with each other by connection_mutex, and thus are safe. To serialize them with non-blocking modesets we just flush the workqueue before executing blocking modesets. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 94f050246b42 ("drm/i915: nonblocking commit") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113133622.8593-1-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 757fffcfdffb6c0dd46c1b264091c36b4e5a86ae) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit (git 2.34.1) at 2024-06-13 00:53:52 +0000