summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2023-03-24drm/i915: Add PLANE_CHICKEN registersVille Syrjälä
Define the PLANE_CHICKEN register offsets. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-5-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-03-24drm/i915/dpt: Introduce HAS_DPT()Ville Syrjälä
Replace the hand rolled DISPLAY_VER check for a more descriptive HAS_DPT() macro. Will be used on more than one place later. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-4-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-03-24drm/i915/dpt: Only do the POT stride remap when using DPTVille Syrjälä
If we want to test with DPT disabled on ADL the POT stride remap stuff needs to be disabled. Make it depend on actual DPT usage instead of just assuming it based on the modifier. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-3-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-03-24drm/i915/dpt: Treat the DPT BO as a framebufferVille Syrjälä
Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: stable@vger.kernel.org Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-03-23drm/i915/guc: Allow for very slow GuC loadingJohn Harrison
A failure to load the GuC is occasionally observed where the GuC log actually showed that the GuC had loaded just fine. The implication being that the load just took ever so slightly longer than the 200ms timeout. Given that the actual time should be tens of milliseconds at the slowest, this should never happen. So far the issue has generally been caused by a bad IFWI resulting in low frequencies during boot (depsite the KMD requesting max frequency). However, the issue seems to happen more often than one would like. So a) increase the timeout so that the user still gets a working system even in the case of slow load. And b) report the frequency during the load to see if that is the case of the slow down. v2: Reduce timeout in non-debug builds, add references (Daniele) References: https://gitlab.freedesktop.org/drm/intel/-/issues/7931 References: https://gitlab.freedesktop.org/drm/intel/-/issues/8060 References: https://gitlab.freedesktop.org/drm/intel/-/issues/8083 References: https://gitlab.freedesktop.org/drm/intel/-/issues/8136 References: https://gitlab.freedesktop.org/drm/intel/-/issues/8137 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Tested-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316220632.3312218-3-John.C.Harrison@Intel.com
2023-03-23drm/i915/guc: Improve GuC load error reportingJohn Harrison
There are multiple ways in which the GuC load can fail. The driver was reporting the status register as is, but not everyone can read the matrix unfiltered. So add decoding of the common error cases. Also, remove the comment about interrupt based load completion checking being not recommended. The interrupt was removed from the GuC firmware some time ago so it is no longer an option anyway. While at it, also abort the timeout if a known error code is reported. No need to keep waiting if the GuC has already given up the load. v2: Fix mis-matched case and confusing 'success' variable (Daniele). Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316220632.3312218-2-John.C.Harrison@Intel.com
2023-03-23drm/i915/selftests: Drop igt_cs_tlbJonathan Cavitt
The gt_tlb live selftest has the same code coverage as the igt_cs_tlb subtest of gtt, except it is better at detecting TLB bugs. Furthermore, while igt_cs_tlb is hitting some unforeseen issues, these issues are either false positives due to the test being poorly formatted, or are true positives that can be more easily diagnosed with smaller tests. As such, igt_cs_tlb is superceded by and obsoleted by gt_tlb, meaning it can be removed. Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320192117.287374-1-andi.shyti@linux.intel.com
2023-03-23drm/i915/huc: use const struct bus_type pointersGreg Kroah-Hartman
The struct bus_type pointers in the functions intel_huc_register_gsc_notifier() and intel_huc_unregister_gsc_notifier() should be a const pointer, as the structure is not modified anywhere in the functions, and the pointer they are passed will be a const * in the near future. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tony Ye <tony.ye@intel.com> Cc: Vitaly Lubart <vitaly.lubart@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://lore.kernel.org/r/20230313182918.1312597-30-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23drm/i915/gem: Flush lmem contents after constructionChris Wilson
i915_gem_object_create_lmem_from_data() lacks the flush of the data written to lmem to ensure the object is marked as dirty and the writes flushed to the backing store. Once created, we can immediately release the obj->mm.mapping caching of the vmap. Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com
2023-03-23drm/i915/mtl: Add HDCP GSC interfaceSuraj Kandpal
MTL uses GSC command streamer i.e gsc cs to send HDCP/PXP commands to GSC f/w. It requires to keep hdcp display driver agnostic to content protection f/w (ME/GSC fw) in the form of i915_hdcp_fw_ops generic ops. Adding HDCP GSC CS interface by leveraging the i915_hdcp_fw_ops generic ops instead of I915_HDCP_COMPONENT as integral part of i915. Adding checks to see if GSC is loaded and proxy is setup --v6 -dont change the license date in same patch series [Jani] -fix the license year {Jani] --v8 -remove stale comment [Ankit] -get headers in alphabetical order [Ankit] -fix hdcp2_supported check [Ankit] --v9 -remove return statement from hdcp_gsc_fini [Ankit] Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-7-suraj.kandpal@intel.com
2023-03-23drm/i915/mtl: Add function to send command to GSC CSSuraj Kandpal
Add function that takes care of sending command to gsc cs. We start of with allocation of memory for our command intel_hdcp_gsc_message that contains gsc cs memory header as directed in specs followed by the actual payload hdcp message that we want to send. Spec states that we need to poll pending bit of response header around 20 times each try being 50ms apart hence adding that to current gsc_msg_send function Also we use the same function to take care of both sending and receiving hence no separate function to get the response. --v4 -Create common function to fill in gsc_mtl_header [Alan] -define host session bitmask [Alan] --v5 -use i915 directly instead of gt->i915 [Alan] -No need to make fields NULL as we are already using kzalloc [Alan] --v8 -change mechanism to reuse the same memory for one hdcp session[Alan] -fix header ordering -add comments to explain flags and host session mask [Alan] --v9 -remove gem obj from hdcp message as we can use i915_vma_unpin_and_release [Alan] -move hdcp message allocation and deallocation from hdcp2_enable and hdcp2_disable to init and teardown of HDCP [Alan] --v10 -remove unnecessary i915_vma_unpin [Alan] --v11 -fix comment style [Uma] Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Pervin Teres <alan.previn.teres.alexis@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-6-suraj.kandpal@intel.com
2023-03-23drm/i915/hdcp: HDCP2.x Refactoring to agnostic hdcpSuraj Kandpal
There are more than 1 type of content protection security firmware. Make the name generic %s/_mei_/_ --v3 -Changing names to drop cp_fw to make naming more agnostic[Jani] --v4 -remove header reference in intel_display_core.h [Uma] -fix commit message and prefix drm [Uma] Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-4-suraj.kandpal@intel.com
2023-03-23drm/i915/hdcp: Use generic names for HDCP helpers and structsAnshuman Gupta
pre MTL we interact with mei interface to talk to firmware and enable CP but going forward we will talk to gsc cs because of which we are making all names for HDCP helpers and structures generic as either mei or gsc cs maybe used. Change the include/drm/i915_mei_hdcp_interface.h to include/drm/i915_hdcp_interface.h Change the i915_hdcp_interface.h header naming convention to suit generic f/w type. %s/MEI_/HDCP_ %s/mei_dev/hdcp_dev Change structure name Accordingly. %s/i915_hdcp_comp_master/i915_hdcp_master %s/i915_hdcp_component_ops/i915_hdcp_ops --v6 -make each patch build individually [Jani] --v8 -change ME FW to ME/GSC FW [Ankit] -fix formatting issue [Ankit] --v9 -fix commit message and header [Uma] --v10 -rename comp variable [Uma] Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-3-suraj.kandpal@intel.com
2023-03-23drm/i915/gsc: Create GSC request submission mechanismSuraj Kandpal
HDCP and PXP will require a common function to allow it to submit commands to the gsc cs. Also adding the gsc mtl header that needs to be added on to the existing payloads of HDCP and PXP. --v4 -Seprate gsc load and heci cmd submission into different functions in different files for better scalability [Alan] -Rename gsc address field [Alan] --v5 -remove extra line is intel_gsc_fw.h [Uma] Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: Suraj Kandpal<suraj.kandpal@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-2-suraj.kandpal@intel.com
2023-03-23drm/i915: Use i915 instead of dev_priv insied the file_priv structureAndi Shyti
In the process of renaming all instances of 'dev_priv' to 'i915', start using 'i915' within the 'drm_i915_file_private' structure. Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230322001611.632321-1-andi.shyti@linux.intel.com
2023-03-22drm/i915/tc: Check the PLL type used by an enabled TC portImre Deak
The current way to determine during HW state sanitization if a PHY is connected in the expected way doesn't work in all cases. The check for this considers only the PHY ready/owned state and the initial TC mode which was determined earlier by the TC port HW readout - using the sink's HPD and the same PHY ready/owned states. For instance for an enabled DP-alt/TBT port without the PHY ready/owned flags set the initial mode will be TBT, and this will be regarded as a valid PHY state. However it's possible that the port is actually enabled in DP-alt mode, but for some reason the PHY ownership was not acquired. Make sure the driver can detect invalid PHY states as in the above example by checking the PHY ready/owned state wrt. the PLL type used. This should be the TBT PLL if the PHY is not owned and the MG (non-TBT) PLL if the PHY is owned. v2: Rebased on change passing crtc_state in the previous patch. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321220101.983366-3-imre.deak@intel.com
2023-03-22drm/i915/tc: Factor out a function querying active links on a TC portImre Deak
For clarity factor out the function to determine if there are active links on a TC port. This prepares for the next patch also checking the port's PLL type. While at it pass crtc_state to intel_tc_port_sanitize_mode(), and check hw.active in that, instead of the deprecated crtc->active flag. v2: Check crtc_state->hw.active instead of crtc->active. (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321220101.983366-2-imre.deak@intel.com
2023-03-22drm/i915: Add encoder hook to get the PLL type used by TC portsImre Deak
Add an encoder hook, which can be called on enabled TC ports to determine if the port uses a TBT or a non-TBT PLL. An upcoming patch will use this to sanity check active TC port's PHY state wrt. the PLL type used by the port. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-13-imre.deak@intel.com
2023-03-22drm/i915/tc: Assume a TC port is legacy if VBT says the port has HDMIImre Deak
Since an HDMI output can only be enabled in legacy mode on TC ports, assume that VBT is wrong and the port is legacy if VBT says the port is non-legacy and has HDMI. If VBT says to enable DP as well leave the non-legacy flag enabled, relying on the flag getting fixed up based on the HPD status during sink detection. v2: Fix the legacy port flag only if DP is not enabled. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321220101.983366-1-imre.deak@intel.com
2023-03-22drm/i915/tc: Make the TC mode readout consistent in all PHY statesImre Deak
For consistency detect the initial TC mode in the PHY owned state the same way this is done in the not owned state (w/o changing the behavior). While at it, add more details to the PHY state debug print. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-11-imre.deak@intel.com
2023-03-22drm/i915/tc: Fix initial TC mode on disabled legacy portsImre Deak
Atm, a TC port's initial mode will be read out as TBT mode in any case the PHY ownership is not held. This isn't correct for legacy ports which should be used only in legacy mode. Fix the above initial mode to be disconnected mode for a legacy port and TBT mode for DP-alt/TBT ports. Determine the port type by checking first the HPD state and then the legacy VBT flag (so the HPD state can correct a bogus VBT flag). If a sink is connected on a disabled port the PHY will get also connected (switching it to legacy mode on a legacy port). Also connect the PHY on a legacy port if it's enabled but BIOS incorrectly left it in the disconnected state for some reason. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-10-imre.deak@intel.com
2023-03-22drm/i915/tc: Fix TC mode for a legacy port if the PHY is not readyImre Deak
A legacy TC port can't be switched to TBT mode, even if the PHY initialization wasn't ready yet for some reason, so prevent this. This shouldn't normally happen as the driver waits for the IOM/TCSS PHY initialization during driver loading and system resume. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-9-imre.deak@intel.com
2023-03-22drm/i915/tc: Fix target TC mode for a disconnected legacy portImre Deak
Atm, the target TC mode - which the PHY should be switched to at any point it's used - is TBT in case there is no sink connected. However legacy ports are only used in the legacy mode regardless of the sink connected state. Fix the mode returned by intel_tc_port_get_target_mode() accordingly. Despite of the above issue, the PHY got disconnected as expected in response to a sink disconnect event, causing only a redundant PHY disconnect->reconnect sequence whenever the port was used. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-8-imre.deak@intel.com
2023-03-22drm/i915/tc: Factor out helpers converting HPD mask to TC modeImre Deak
Factor out helpers used later in the patchset to convert an HPD status mask to TC mode or target TC mode. No functional changes. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-7-imre.deak@intel.com
2023-03-22drm/i915/tc: Wait for IOM/FW PHY initialization of legacy TC portsImre Deak
During boot-up/system resume, the TC PHY on legacy ports will be initialized by the IOM/TCSS firmware regardless of a sink being connected or not (as opposed to DP-alt/TBT ports, which the FW only inits once a sink is connected). Wait for the above initialization to complete during HW readout, so that connecting the PHY later will already see the expected PHY ready state. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-6-imre.deak@intel.com
2023-03-22drm/i915/tc: Fix system resume MST mode restore for DP-alt sinksImre Deak
At least restoring the MST topology during system resume needs to use AUX before the display HW readout->sanitization sequence is complete, but on TC ports the PHY may be in the wrong mode for this, resulting in the AUX transfers to fail. The initial TC port mode is kept fixed as BIOS left it for the above HW readout sequence (to prevent changing the mode on an enabled port). If the port is disabled this initial mode is TBT - as in any case the PHY ownership is not held - even if a DP-alt sink is connected. Thus, the AUX transfers during this time will use TBT mode instead of the expected DP-alt mode and so time out. Fix the above by connecting the PHY during port initialization if the port is disabled, which will switch to the expected mode (DP-alt in the above case). As the encoder/pipe HW state isn't read-out yet at this point, check if the port is enabled based on the DDI_BUF enabled flag. Save the read-out initial mode, so intel_tc_port_sanitize_mode() can check this wrt. the read-out encoder HW state. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-5-imre.deak@intel.com
2023-03-22drm/i915/tc: Fix the ICL PHY ownership check in TC-cold stateImre Deak
The commit renaming icl_tc_phy_is_in_safe_mode() to icl_tc_phy_take_ownership() didn't flip the function's return value accordingly, fix this up. This didn't cause an actual problem besides state check errors, since the function is only used during HW readout. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership") Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com
2023-03-22drm/i915/tc: Fix TC port link ref init for DP MST during HW readoutImre Deak
An enabled TC MST port holds one TC port link reference, regardless of the number of enabled streams on it, but the TC port HW readout takes one reference for each active MST stream. Fix the HW readout, taking only one reference for MST ports. This didn't cause an actual problem, since the encoder HW readout doesn't yet support reading out the MST HW state. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-3-imre.deak@intel.com
2023-03-22drm/i915/tc: Abort DP AUX transfer on a disconnected TC portImre Deak
On TC ports the 4ms AUX timeout combined with the 5 * 32 retry attempts during DPCD accesses adds a 640ms delay to each access if the sink is disconnected. This in turn slows down a modeset during which the sink is disconnected (for instance a disabling modeset). Prevent the above delay by aborting AUX transfers on a TC port with a disconnected sink. The DP 1.4a link CTS (4.2.1.5 Source Device Inactive HPD / Inactive AUX Test") also requires not to initiate AUX transfers on disconnected DP ports in general, however this patch doesn't change the behavior on non-TC ports, leaving that for a follow-up. Reported-and-tested-by: Chris Chiu <chris.chiu@canonical.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8279 Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-2-imre.deak@intel.com
2023-03-22Merge tag 'drm-intel-gt-next-2023-03-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Fix issue #6333: "list_add corruption" and full system lockup from performance monitoring (Janusz) - Give the punit time to settle before fatally failing (Aravind, Chris) - Don't use stolen memory or BAR for ring buffers on LLC platforms (John) - Add missing ecodes and correct timeline seqno on GuC error captures (John) - Make sure DSM size has correct 1MiB granularity on Gen12+ (Nirmoy, Lucas) - Fix potential SSEU max_subslices array-index-out-of-bounds access on Gen11 (Andrea) - Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+ (Matt R.) - Apply Wa_1408615072/Wa_1407596294 correctly on Gen11 (Matt R) - Apply LNCF/LBCF workarounds correctly on XeHP SDV/PVC/DG2 (Matt R) - Implement Wa_1606376872 for Xe_LP (Gustavo) - Consider GSI offset when doing MCR lookups on Meteorlake+ (Matt R.) - Add engine TLB invalidation for Meteorlake (Matt R.) - Fix GSC Driver-FLR completion on Meteorlake (Alan) - Fix GSC races on driver load/unload on Meteorlake+ (Daniele) - Disable MC6 for MTL A step (Badal) - Consolidate TLB invalidation flow (Tvrtko) - Improve debug GuC/HuC debug messages (Michal Wa., John) - Move fd_install after last use of fence (Rob) - Initialize the obj flags for shmem objects (Aravind) - Fix missing debug object activation (Nirmoy) - Probe lmem before the stolen portion (Matt A) - Improve clean up of GuC busyness stats worker (John) - Fix missing return code checks in GuC submission init (John) - Annotate two more workaround/tuning registers as MCR on PVC (Matt R) - Fix GEN8_MISCCPCTL definition and remove unused INF_UNIT_LEVEL_CLKGATE (Lucas) - Use sysfs_emit() and sysfs_emit_at() (Nirmoy) - Make kobj_type structures constant (Thomas W.) - make kobj attributes const on gt/ (Jani) - Remove the unused virtualized start hack on buddy allocator (Matt A) - Remove redundant check for DG1 (Lucas) - Move DG2 tuning to the right function (Lucas) - Rename dev_priv to i915 for private data naming consistency in gt/ (Andi) - Remove unnecessary whitelisting of CS_CTX_TIMESTAMP on Xe_HP platforms (Matt R.) - - Escape wildcard in method names in kerneldoc (Bagas) - Selftest improvements (Chris, Jonathan, Tvrtko, Anshuman, Tejas) - Fix sparse warnings (Jani) [airlied: fix unused variable in intel_workarounds] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZBMSb42yjjzczRhj@jlahtine-mobl.ger.corp.intel.com
2023-03-21drm/i915: Disable DC states for all commitsVille Syrjälä
Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming") Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
2023-03-21drm/i915: Workaround ICL CSC_MODE sticky armingVille Syrjälä
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where CSC_MODE arming is sticky. That is, once armed it remains armed causing the CSC coeff/offset registers to become effectively self-arming. CSC coeff/offset registers writes no longer disarm the CSC, but fortunately register read still do. So we can use that to disarm the CSC unit once the registers for the current frame have been latched. This avoid s the self-arming behaviour from persisting into the next frame's .color_commit_noarm() call. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-21drm/i915: Add a .color_post_update() hookVille Syrjälä
We're going to need stuff after the color management register latching has happened. Add a corresponding hook. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-21drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on ↵Ville Syrjälä
skl/glk SKL/GLK CSC unit suffers from a nasty issue where a CSC coeff/offset register read or write between DC5 exit and PSR exit will undo the CSC arming performed by DMC, and then during PSR exit the hardware will latch zeroes into the active CSC registers. This causes any plane going through the CSC to output all black. We can sidestep the issue by making sure the PSR exit has already actually happened before we touch the CSC coeff/offset registers. Easiest way to guarantee that is to just move the CSC programming back into the .color_commir_arm() as we force a PSR exit (and crucially wait for it to actually happen) prior to touching the arming registers. When PSR (and thus also DC states) are disabled we don't have anything to worry about, so we can keep using the more optional _noarm() hook for writing the CSC registers. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283 Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-21drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()Ville Syrjälä
We're going to want different behavior for skl/glk vs. icl in .color_commit_noarm(), so split the hook into two. Arguably we already had slightly different behaviour since csc_enable/gamma_enable are never set on icl+, so the old code was perhaps a bit confusing as well. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-21i915/display/dp: SDP CRC16 for 128b132b link layerArun R Murthy
Enable SDP error detection configuration, this will set CRC16 in 128b/132b link layer. For Display version 13 a hardware bit31 in register VIDEO_DIP_CTL is added to enable/disable SDP CRC applicable for DP2.0 only, but the default value of this bit will enable CRC16 in 128b/132b hence skipping this write. Corrective actions on SDP corruption is yet to be defined. v2: Moved the CRC enable to link training init(Jani N) v3: Moved crc enable to ddi pre enable <Jani N> v4: Separate function for SDP CRC16 (Jani N) Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302081532.765821-3-arun.r.murthy@intel.com
2023-03-21drm/i915/bios: Rename find_section to find_bdb_sectionMaarten Lankhorst
This prevents a namespace collision on other archs. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230315121924.2314693-1-jani.nikula@intel.com
2023-03-21drm/i915/debugfs: add crtc i915_pipe debugfs fileJani Nikula
The pipe may differ from crtc index if pipes are fused off. For testing purposes, IGT needs to know the pipe. There's already a I915_GET_PIPE_FROM_CRTC_ID IOCTL for this. However, the upcoming Xe driver won't have that IOCTL, and going forward, we'll want a unified interface for testing i915 and Xe, as they share the display code. Thus add the debugfs for i915 display. v2: User letters for pipe names (Ville) Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-2-jani.nikula@intel.com
2023-03-21drm/i915/debugfs: switch crtc debugfs to struct intel_crtcJani Nikula
Convert the crtc debugfs code to use struct intel_crtc instead of struct drm_crtc. v2: Fix build for CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y (kernel test robot) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-1-jani.nikula@intel.com
2023-03-21drm/i915/debugfs: Enable upper layer interfaces to act on all gt'sAndi Shyti
The commit 82a149a62b6b ("drm/i915/gt: move remaining debugfs interfaces into gt") moved gt-related debugfs files in the gtX/ directories to operate on individual gt's. However, the original files were only functioning on the root GT (GT 0) and have been left in the same location to maintain compatibility with userspace users. Add multiplexing functionality to the higher directories' files. This enables the operations to be performed on all the GTs with a single write. In the case of reads, the files provide an or'ed value across all the tiles. Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230318203616.183765-4-andi.shyti@linux.intel.com
2023-03-21drm/i915/gt: Create per-gt debugfs filesAndi Shyti
To support multi-GT configurations, we need to generate independent debug files for each GT. To achieve this create a separate directory for each GT under the debugfs directory. For instance, in a system with two GTs, the debugfs structure would look like this: /sys/kernel/debug/dri └── 0    ├── gt0    │   ├── drpc    │   ├── engines    │   ├── forcewake    │   ├── frequency    │   └── rps_boost    └── gt1    :   ├── drpc    :   ├── engines    :   ├── forcewake       ├── frequency       └── rps_boost Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230318203616.183765-2-andi.shyti@linux.intel.com
2023-03-21drm/i915/pmu: Use functions common with sysfs to read actual freqAshutosh Dixit
Expose intel_rps_read_actual_frequency_fw to read the actual freq without taking forcewake for use by PMU. The code is refactored to use a common set of functions across sysfs and PMU. Using common functions with sysfs in PMU solves the issues of missing support for MTL and missing support for older generations (prior to Gen6). It also future proofs the PMU where sometimes code has been updated for sysfs and PMU has been missed. v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko) v3: (Tvrtko) - Remove goto in __read_cagf - Unexport intel_rps_get_cagf and intel_rps_read_punit_req Fixes: 22009b6dad66 ("drm/i915/mtl: Modify CAGF functions for MTL") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com
2023-03-20drm/i915/audio: update audio keepalive clock valuesClint Taylor
BSPEC has updated the cdclk audio keepalives AUD_TS_CDCLK_M value to 60 for all supported platforms and refclks. BSPEC: 54034 BSPEC: 55409 BSPEC: 65243 Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316234654.3797572-1-clinton.a.taylor@intel.com
2023-03-20Revert "drm/i915/hwmon: Enable PL1 power limit"Ashutosh Dixit
This reverts commit ee892ea83d99610fa33bea612de058e0955eec3a. It was accidentally picked up for backporting. Revert. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230319140300.2892032-1-ashutosh.dixit@intel.com
2023-03-20drm/i915/psr: clean up PSR debugfs sink status error handlingJani Nikula
Handle errors first and return early, and reduce indentation on the happy day code path. Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230317134144.223936-3-jani.nikula@intel.com
2023-03-20drm/i915/psr: switch PSR debugfs to struct intel_connectorJani Nikula
Prefer struct intel_connector over struct drm_connector. Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230317134144.223936-2-jani.nikula@intel.com
2023-03-20drm/i915/psr: move PSR debugfs to intel_psr.cJani Nikula
Move the debugfs next to the implementation. Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230317134144.223936-1-jani.nikula@intel.com
2023-03-20drm/i915: Update vblank timestamping stuff on seamless M/N changeVille Syrjälä
When we change the M/N values seamlessly during a fastset we should also update the vblank timestamping stuff to make sure the vblank timestamp corrections/guesstimations come out exact. Note that only crtc_clock and framedur_ns can actually end up changing here during fastsets. Everything else we touch can only change during full modesets. Technically we should try to do this exactly at the start of vblank, but that would require some kind of double buffering scheme. Let's skip that for now and just update things right after the commit has been submitted to the hardware. This means the information will be properly up to date when the vblank irq handler goes to work. Only if someone ends up querying some vblanky stuff in between the commit and start of vblank may we see a slight discrepancy. Also this same problem really exists for the DRRS downclocking stuff. But as that is supposed to be more or less transparent to the user, and it only drops to low gear after a long delay (1 sec currently) we probably don't have to worry about it. Any time something is actively submitting updates DRRS will remain in high gear and so the timestamping constants will match the hardware state. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Fixes: e6f29923c048 ("drm/i915: Allow M/N change during fastset on bdw+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-1-ville.syrjala@linux.intel.com (cherry picked from commit 8cb1f95cca68421b08333175719fdd3615372ca8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915: Fix format for perf_limit_reasonsVinay Belgaumkar
Use hex format so that it is easier to decode. Fixes: fe5979665f64 ("drm/i915/debugfs: Add perf_limit_reasons in debugfs") Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230315022906.2467408-1-vinay.belgaumkar@intel.com (cherry picked from commit 5e008ba67cb80084e99b40ccd46f9029ae421632) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-20drm/i915/gt: perform uc late init after probe error injectionAndrzej Hajda
Probe pseudo errors should be injected only in places where real errors can be encountered, otherwise unwinding code can be broken. Placing intel_uc_init_late before i915_inject_probe_error violated this rule, resulting in following bug: __intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt)) Fixes: 481d458caede ("drm/i915/guc: Add golden context to GuC ADS") Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com (cherry picked from commit c4252a11131c7f27a158294241466e2a4e7ff94e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit (git 2.34.1) at 2025-09-26 11:34:37 +0000