Age | Commit message (Collapse) | Author |
|
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to
backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB
contents") updated the backlight BDB data accordingly. This broke the
parsing of backlight BDB data in VBT for versions 236 - 238 (both
inclusive) and hence the backlight controls are not responding on units
with the concerned BDB version.
backlight_control information has been present in backlight BDB data
from at least BDB version 191 onwards, if not before. Hence this patch
extracts the backlight_control information for BDB version 191 or newer.
Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236).
Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251).
v2: removed checking the block size of the backlight BDB data
[vsyrjala: this is completely safe thanks to commit e163cfb4c96d
("drm/i915/bios: Make copies of VBT data blocks")]
Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Intel hardware is capable of programming the Maud/Naud SDPs on its
own based on real-time clocks. While doing so, it takes care
of any deviations from the theoretical values. Programming the registers
explicitly with static values can interfere with this logic. Therefore,
let the HW decide the Maud and Naud SDPs on it's own.
Cc: stable@vger.kernel.org # v5.17
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097
Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit 8e056b50d92ae7f4d6895d1c97a69a2a953cf97b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We missed setting the CCS mode during resume and engine resets.
Create a workaround to be added in the engine's workaround list.
This workaround sets the XEHP_CCS_MODE value at every reset.
The issue can be reproduced by running:
$ clpeak --kernel-latency
Without resetting the CCS mode, we encounter a fence timeout:
Fence expiration time out i915-0000:03:00.0:clpeak[2387]:2!
Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload")
Reported-by: Gnattu OC <gnattuoc@me.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Tested-by: Gnattu OC <gnattuoc@me.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Krzysztof Gibala <krzysztof.gibala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426000723.229296-1-andi.shyti@linux.intel.com
(cherry picked from commit 4cfca03f76413db115c3cc18f4370debb1b81b2b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change switch between non-VRR and VRR timings
generators on the fly, or even when sending the push to the
transcoder. For now just disable VRR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-6-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit f9d5e51db65652dbd8a2102fd7619440e3599fd2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change the timings at the same time. For
now just disable live M/N updates when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The current modeset sequence can't handle port sync and bigjoiner
at the same time. Refuse port sync when bigjoiner is needed,
at least until we fix the modeset sequence.
v2: Add a FIXME (Vandite)
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit b37e1347b991459c38c56ec2476087854a4f720b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Bigjoiner seem to be causing all kinds of grief to the PSR
code currently. I don't believe there is any hardware issue
but the code simply not handling this correctly. For now
just disable PSR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.mruthy@intel.com>
Acked-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 372fa0c79d3f289f813d8001e0a8a96d1011826c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The previous fix for the circlular lock splat about the busyness
worker wasn't quite complete. Even though the reset-in-progress flag
is cleared at the start of intel_uc_reset_finish, the entire function
is still inside the reset mutex lock. Not sure why the patch appeared
to fix the issue both locally and in CI. However, it is now back
again.
There is a further complication that the wedge code path within
intel_gt_reset() jumps around so much that it results in nested
reset_prepare/_finish calls. That is, the call sequence is:
intel_gt_reset
| reset_prepare
| __intel_gt_set_wedged
| | reset_prepare
| | reset_finish
| reset_finish
The nested finish means that even if the clear of the in-progress flag
was moved to the end of _finish, it would still be clear for the
entire second call. Surprisingly, this does not seem to be causing any
other problems at present.
As an aside, a wedge on fini does not call the finish functions at
all. The reset_in_progress flag is left set (twice).
So instead of trying to cancel the worker anywhere at all in the reset
path, just add a cancel to intel_guc_submission_fini instead. Note
that it is not a problem if the worker is still active during a reset.
Either it will run before the reset path starts locking things and
will simply block the reset code for a tiny amount of time. Or it will
run after the locks have been acquired and will early exit due to the
try-lock.
Also, do not use the reset-in-progress flag to decide whether a
synchronous cancel is safe (from a lockdep perspective) or not.
Instead, use the actual reset mutex state (both the genuine one and
the custom rolled BACKOFF one).
Fixes: 0e00a8814eec ("drm/i915/guc: Avoid circular locking issue on busyness flush")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329235306.1559639-1-John.C.Harrison@Intel.com
(cherry picked from commit 3563d855312acedcd445a3767f0cb07906f1c26f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
HDCP 1.x capability needs to be checked even if setup is not
HDCP 2.x capable.
--v2
-Assign hdcp_capable and hdcp2_capable to false [Chaitanya]
--v3
-Fix variable assignment [Chaitanya]
Fixes: 813cca96e4ac ("drm/i915/hdcp: Add new remote capability check shim function")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401055652.276785-2-suraj.kandpal@intel.com
(cherry picked from commit 6809f9246d43f7cb07310ca6a3deb7aa1c0ea938)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().
It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().
In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().
And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.
v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
when the cdclk frequency is changing during the current
commit phase (Gustavo)
Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
(cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.
If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.
Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.
The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.
v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use
Cc: stable@vger.kernel.org
Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
(cherry picked from commit 3aecee90ac12a351905f12dda7643d5b0676d6ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
ICL supposedly doesn't support FEC on MST. Reject it.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-7-ville.syrjala@linux.intel.com
(cherry picked from commit b648ce2a28ba83c4fa67c61fcc5983e15e9d4afb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The MST code currently assumes that glk+ already supports MST+DSC,
which is incorrect. We need to check for TGL+ actually. ICL does
support SST+DSC, but supposedly it can't do MST+FEC which will
also rule out MST+DSC.
Note that a straight TGL+ check doesn't work here because DSC
support can get fused out, so we do need to also check 'has_dsc'.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com
(cherry picked from commit c9c92f286dbdf872390ef3e74dbe5f0641e46f55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
For DISPLAY < 13, compressed bpp is chosen from a list of
supported compressed bpps. Fix the condition to choose the
appropriate compressed bpp from the list.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10162
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305054443.2489895-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 5a1da42b50f3594e18738885c2f23ed36629dd00)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance.
This change can be tested with igt i915_query.
Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-4-andi.shyti@linux.intel.com
(cherry picked from commit 2bebae0112b117de7e8a7289277a4bd2403b9e17)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We want a fixed load CCS balancing consisting in all slices
sharing one single user engine. For this reason do not create the
intel_engine_cs structure with its dedicated command streamer for
CCS slices beyond the first.
Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-3-andi.shyti@linux.intel.com
(cherry picked from commit c7a5aa4e57f88470313a8277eb299b221b86e3b1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The hardware should not dynamically balance the load between CCS
engines. Wa_14019159160 recommends disabling it across all
platforms.
Fixes: d2eae8e98d59 ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-2-andi.shyti@linux.intel.com
(cherry picked from commit f5d2904cf814f20b79e3e4c1b24a4ccc2411b7e0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 9bb66c179f50 ("drm/i915: Reserve some kernel space per
vm") reduces the available VM space of one page in order to apply
Wa_16018031267 and Wa_16018063123.
This page was reserved indiscrimitely in all platforms even when
not needed. Limit it to DG2 onwards.
Fixes: 9bb66c179f50 ("drm/i915: Reserve some kernel space per vm")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327200546.640108-1-andi.shyti@linux.intel.com
(cherry picked from commit 9721634441d5dedba7f9eebb2bf0c9411cbafc4e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we are not aligning selective update area to cover cursor fully
when cursor is not updated by itself but still in the selective update
area. Fix this by checking cursor separately after
drm_atomic_add_affected_planes.
Bspec: 68927
Fixes: 1bff93b8bc27 ("drm/i915/psr: Extend SU area to cover cursor fully if needed")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-4-jouni.hogander@intel.com
(cherry picked from commit d37b3dac68e26669f03f768b3afc9abc094c9ac9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently PIPE_SRCSZ_ERLY_TPT is written in
intel_display.c:intel_set_pipe_src_size. This doesn't work as
intel_set_pipe_src_size is called only on modeset.
Bspec: 68927
Fixes: 3291bbb93e16 ("drm/i915/psr: Configure PIPE_SRCSZ_ERLY_TPT for psr2 early transport")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-3-jouni.hogander@intel.com
(cherry picked from commit b52c4093b0c9089b00b42823d41986a94d32e341)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When early transport is enabled we need to write PIPE_SRCSZ_ERLY_TPT on
every flip doing selective update. This patch calculates
PIPE_SRCSZ_ERLY_TPT same way as is done for PSR2_MAN_TRK_CTL value and
stores i in intel_crtc_state->pipe_srcsz_early_tpt to be written later
during flip.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319123327.1661097-2-jouni.hogander@intel.com
(cherry picked from commit f3b899f0b4b17fa0b20e27c23f78604d5686383d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
UHBR13.5 is not supported in MTL and also the DP2.1 spec says UHBR13.5
is optional. Hence removing UHBR135 from the supported link rates.
v2: Reframed the commit message and added link to the issue.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Fixes: 62618c7f117e ("drm/i915/mtl: C20 PLL programming")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228144350.3184930-1-arun.r.murthy@intel.com
(cherry picked from commit ddf8a8bbb5643265883bab0c59adf0648422c4bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 0848814aa296 ("drm/i915/dp: Fix connector DSC HW state readout")
moved the DSC HW state readout to a connector specific hook, however
only added the hook for DP MST connectors, not for DP SST ones. Fix
adding the hook for SST connectors as well.
This fixes the following warn on platforms where BIOS enables DSC:
[ 66.208601] i915 0000:00:02.0: drm_WARN_ON(!connector->dp.dsc_decompression_aux || !connector->dp.dsc_decompression_enabled)
...
[ 66.209024] RIP: 0010:intel_dp_sink_disable_decompression+0x76/0x110 [i915]
...
[ 66.209333] ? intel_dp_sink_disable_decompression+0x76/0x110 [i915]
...
[ 66.210068] intel_disable_ddi+0x135/0x1d0 [i915]
[ 66.210302] intel_encoders_disable+0x9b/0xc0 [i915]
[ 66.210565] hsw_crtc_disable+0x153/0x170 [i915]
[ 66.210823] intel_old_crtc_state_disables+0x52/0xb0 [i915]
[ 66.211107] intel_atomic_commit_tail+0x5cf/0x1330 [i915]
[ 66.211366] intel_atomic_commit+0x39d/0x3f0 [i915]
[ 66.211612] ? intel_atomic_commit+0x39d/0x3f0 [i915]
[ 66.211872] drm_atomic_commit+0x9d/0xd0 [drm]
[ 66.211921] ? __pfx___drm_printfn_info+0x10/0x10 [drm]
[ 66.211975] intel_initial_commit+0x1a8/0x260 [i915]
[ 66.212234] intel_display_driver_probe+0x2a/0x80 [i915]
[ 66.212479] i915_driver_probe+0x7c6/0xc60 [i915]
[ 66.212664] ? drm_privacy_screen_get+0x168/0x190 [drm]
[ 66.212711] i915_pci_probe+0xe2/0x1c0 [i915]
Fixes: 0848814aa296 ("drm/i915/dp: Fix connector DSC HW state readout")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10410
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311145626.2454923-1-imre.deak@intel.com
(cherry picked from commit 7a51a2aa2384ea8bee76698ae586a2bea5b8ddb5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
|
|
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
intel_bios_encoder_supports_dp_dual_mode()
If we have no VBT, or the VBT didn't declare the encoder
in question, we won't have the 'devdata' for the encoder.
Instead of oopsing just bail early.
We won't be able to tell whether the port is DP++ or not,
but so be it.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10464
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319092443.15769-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 26410896206342c8a80d2b027923e9ee7d33b733)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Calling i915_gem_object_get_dma_address() from the vblank
evade critical section triggers might_sleep().
While we know that we've already pinned the framebuffer
and thus i915_gem_object_get_dma_address() will in fact
not sleep in this case, it seems reasonable to keep the
unconditional might_sleep() for maximum coverage.
So let's instead pre-populate the dma address during
fb pinning, which all happens before we enter the
vblank evade critical section.
We can use u32 for the dma address as this class of
hardware doesn't support >32bit addresses.
Cc: stable@vger.kernel.org
Fixes: 0225a90981c8 ("drm/i915: Make cursor plane registers unlocked")
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_crate.local/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.syrjala@linux.intel.com
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
(cherry picked from commit c1289a5c3594cf04caa94ebf0edeb50c62009f1f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Originally, with strict in order execution, we could complete execution
only when the queue was empty. Preempt-to-busy allows replacement of an
active request that may complete before the preemption is processed by
HW. If that happens, the request is retired from the queue, but the
queue_priority_hint remains set, preventing direct submission until
after the next CS interrupt is processed.
This preempt-to-busy race can be triggered by the heartbeat, which will
also act as the power-management barrier and upon completion allow us to
idle the HW. We may process the completion of the heartbeat, and begin
parking the engine before the CS event that restores the
queue_priority_hint, causing us to fail the assertion that it is MIN.
<3>[ 166.210729] __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1))
<0>[ 166.210781] Dumping ftrace buffer:
<0>[ 166.210795] ---------------------------------
...
<0>[ 167.302811] drm_fdin-1097 2..s1. 165741070us : trace_ports: 0000:00:02.0 rcs0: promote { ccid:20 1217:2 prio 0 }
<0>[ 167.302861] drm_fdin-1097 2d.s2. 165741072us : execlists_submission_tasklet: 0000:00:02.0 rcs0: preempting last=1217:2, prio=0, hint=2147483646
<0>[ 167.302928] drm_fdin-1097 2d.s2. 165741072us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 1217:2, current 0
<0>[ 167.302992] drm_fdin-1097 2d.s2. 165741073us : __i915_request_submit: 0000:00:02.0 rcs0: fence 3:4660, current 4659
<0>[ 167.303044] drm_fdin-1097 2d.s1. 165741076us : execlists_submission_tasklet: 0000:00:02.0 rcs0: context:3 schedule-in, ccid:40
<0>[ 167.303095] drm_fdin-1097 2d.s1. 165741077us : trace_ports: 0000:00:02.0 rcs0: submit { ccid:40 3:4660* prio 2147483646 }
<0>[ 167.303159] kworker/-89 11..... 165741139us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence c90:2, current 2
<0>[ 167.303208] kworker/-89 11..... 165741148us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:c90 unpin
<0>[ 167.303272] kworker/-89 11..... 165741159us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 1217:2, current 2
<0>[ 167.303321] kworker/-89 11..... 165741166us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:1217 unpin
<0>[ 167.303384] kworker/-89 11..... 165741170us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 3:4660, current 4660
<0>[ 167.303434] kworker/-89 11d..1. 165741172us : __intel_context_retire: 0000:00:02.0 rcs0: context:1216 retire runtime: { total:56028ns, avg:56028ns }
<0>[ 167.303484] kworker/-89 11..... 165741198us : __engine_park: 0000:00:02.0 rcs0: parked
<0>[ 167.303534] <idle>-0 5d.H3. 165741207us : execlists_irq_handler: 0000:00:02.0 rcs0: semaphore yield: 00000040
<0>[ 167.303583] kworker/-89 11..... 165741397us : __intel_context_retire: 0000:00:02.0 rcs0: context:1217 retire runtime: { total:325575ns, avg:0ns }
<0>[ 167.303756] kworker/-89 11..... 165741777us : __intel_context_retire: 0000:00:02.0 rcs0: context:c90 retire runtime: { total:0ns, avg:0ns }
<0>[ 167.303806] kworker/-89 11..... 165742017us : __engine_park: __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1))
<0>[ 167.303811] ---------------------------------
<4>[ 167.304722] ------------[ cut here ]------------
<2>[ 167.304725] kernel BUG at drivers/gpu/drm/i915/gt/intel_engine_pm.c:283!
<4>[ 167.304731] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 167.304734] CPU: 11 PID: 89 Comm: kworker/11:1 Tainted: G W 6.8.0-rc2-CI_DRM_14193-gc655e0fd2804+ #1
<4>[ 167.304736] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
<4>[ 167.304738] Workqueue: i915-unordered retire_work_handler [i915]
<4>[ 167.304839] RIP: 0010:__engine_park+0x3fd/0x680 [i915]
<4>[ 167.304937] Code: 00 48 c7 c2 b0 e5 86 a0 48 8d 3d 00 00 00 00 e8 79 48 d4 e0 bf 01 00 00 00 e8 ef 0a d4 e0 31 f6 bf 09 00 00 00 e8 03 49 c0 e0 <0f> 0b 0f 0b be 01 00 00 00 e8 f5 61 fd ff 31 c0 e9 34 fd ff ff 48
<4>[ 167.304940] RSP: 0018:ffffc9000059fce0 EFLAGS: 00010246
<4>[ 167.304942] RAX: 0000000000000200 RBX: 0000000000000000 RCX: 0000000000000006
<4>[ 167.304944] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009
<4>[ 167.304946] RBP: ffff8881330ca1b0 R08: 0000000000000001 R09: 0000000000000001
<4>[ 167.304947] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881330ca000
<4>[ 167.304948] R13: ffff888110f02aa0 R14: ffff88812d1d0205 R15: ffff88811277d4f0
<4>[ 167.304950] FS: 0000000000000000(0000) GS:ffff88844f780000(0000) knlGS:0000000000000000
<4>[ 167.304952] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 167.304953] CR2: 00007fc362200c40 CR3: 000000013306e003 CR4: 0000000000770ef0
<4>[ 167.304955] PKRU: 55555554
<4>[ 167.304957] Call Trace:
<4>[ 167.304958] <TASK>
<4>[ 167.305573] ____intel_wakeref_put_last+0x1d/0x80 [i915]
<4>[ 167.305685] i915_request_retire.part.0+0x34f/0x600 [i915]
<4>[ 167.305800] retire_requests+0x51/0x80 [i915]
<4>[ 167.305892] intel_gt_retire_requests_timeout+0x27f/0x700 [i915]
<4>[ 167.305985] process_scheduled_works+0x2db/0x530
<4>[ 167.305990] worker_thread+0x18c/0x350
<4>[ 167.305993] kthread+0xfe/0x130
<4>[ 167.305997] ret_from_fork+0x2c/0x50
<4>[ 167.306001] ret_from_fork_asm+0x1b/0x30
<4>[ 167.306004] </TASK>
It is necessary for the queue_priority_hint to be lower than the next
request submission upon waking up, as we rely on the hint to decide when
to kick the tasklet to submit that first request.
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318135906.716055-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 98850e96cf811dc2d0a7d0af491caff9f5d49c1e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Object debugging tools were sporadically reporting illegal attempts to
free a still active i915 VMA object when parking a GT believed to be idle.
[161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915]
[161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0
...
[161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1
[161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
[161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915]
[161.360592] RIP: 0010:debug_print_object+0x80/0xb0
...
[161.361347] debug_object_free+0xeb/0x110
[161.361362] i915_active_fini+0x14/0x130 [i915]
[161.361866] release_references+0xfe/0x1f0 [i915]
[161.362543] i915_vma_parked+0x1db/0x380 [i915]
[161.363129] __gt_park+0x121/0x230 [i915]
[161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915]
That has been tracked down to be happening when another thread is
deactivating the VMA inside __active_retire() helper, after the VMA's
active counter has been already decremented to 0, but before deactivation
of the VMA's object is reported to the object debugging tool.
We could prevent from that race by serializing i915_active_fini() with
__active_retire() via ref->tree_lock, but that wouldn't stop the VMA from
being used, e.g. from __i915_vma_retire() called at the end of
__active_retire(), after that VMA has been already freed by a concurrent
i915_vma_destroy() on return from the i915_active_fini(). Then, we should
rather fix the issue at the VMA level, not in i915_active.
Since __i915_vma_parked() is called from __gt_park() on last put of the
GT's wakeref, the issue could be addressed by holding the GT wakeref long
enough for __active_retire() to complete before that wakeref is released
and the GT parked.
I believe the issue was introduced by commit d93939730347 ("drm/i915:
Remove the vma refcount") which moved a call to i915_active_fini() from
a dropped i915_vma_release(), called on last put of the removed VMA kref,
to i915_vma_parked() processing path called on last put of a GT wakeref.
However, its visibility to the object debugging tool was suppressed by a
bug in i915_active that was fixed two weeks later with commit e92eb246feb9
("drm/i915/active: Fix missing debug object activation").
A VMA associated with a request doesn't acquire a GT wakeref by itself.
Instead, it depends on a wakeref held directly by the request's active
intel_context for a GT associated with its VM, and indirectly on that
intel_context's engine wakeref if the engine belongs to the same GT as the
VMA's VM. Those wakerefs are released asynchronously to VMA deactivation.
Fix the issue by getting a wakeref for the VMA's GT when activating it,
and putting that wakeref only after the VMA is deactivated. However,
exclude global GTT from that processing path, otherwise the GPU never goes
idle. Since __i915_vma_retire() may be called from atomic contexts, use
async variant of wakeref put. Also, to avoid circular locking dependency,
take care of acquiring the wakeref before VM mutex when both are needed.
v7: Add inline comments with justifications for:
- using untracked variants of intel_gt_pm_get/put() (Nirmoy),
- using async variant of _put(),
- not getting the wakeref in case of a global GTT,
- always getting the first wakeref outside vm->mutex.
v6: Since __i915_vma_active/retire() callbacks are not serialized, storing
a wakeref tracking handle inside struct i915_vma is not safe, and
there is no other good place for that. Use untracked variants of
intel_gt_pm_get/put_async().
v5: Replace "tile" with "GT" across commit description (Rodrigo),
- avoid mentioning multi-GT case in commit description (Rodrigo),
- explain why we need to take a temporary wakeref unconditionally inside
i915_vma_pin_ww() (Rodrigo).
v4: Refresh on top of commit 5e4e06e4087e ("drm/i915: Track gt pm
wakerefs") (Andi),
- for more easy backporting, split out removal of former insufficient
workarounds and move them to separate patches (Nirmoy).
- clean up commit message and description a bit.
v3: Identify root cause more precisely, and a commit to blame,
- identify and drop former workarounds,
- update commit message and description.
v2: Get the wakeref before VM mutex to avoid circular locking dependency,
- drop questionable Fixes: tag.
Fixes: d93939730347 ("drm/i915: Remove the vma refcount")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f3c71b2ded5c4367144a810ef25f998fd1d6c381)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It is misleading, if the intention was to also print something
in case it succeed it should have a different string.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: 698e19da2914 ("drm/i915: Skip pxp init if gt is wedged")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320210547.71937-1-jose.souza@intel.com
(cherry picked from commit d437099ab21cd4c6ce5d578b765df642d759c929)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since commit 0c65dc062611 ("drm/i915/jsl: s/JSL/JASPERLAKE for
platform/subplatform defines"), boot freezes on a Jasper Lake tablet
(Librem 11), usually with graphical corruption on the eDP display,
but sometimes just a black screen. This commit was included in 6.6 and
later.
That commit was intended to refactor EHL and JSL macros, but the change
to ehl_combo_pll_div_frac_wa_needed() started matching JSL incorrectly
when it was only intended to match EHL.
It replaced:
return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) &&
IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
with:
return (((IS_ELKHARTLAKE(i915) || IS_JASPERLAKE(i915)) &&
IS_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) ||
Remove IS_JASPERLAKE() to fix the regression.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Cc: stable@vger.kernel.org
Fixes: 0c65dc062611 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313135424.3731410-1-jonathon.hall@puri.sm
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 1ef48859317b2a77672dea8682df133abf9c44ed)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In i915 hwmon sysfs getter path we now take a hwmon_lock, then acquire an
rpm wakeref. That results in lock inversion:
<4> [197.079335] ======================================================
<4> [197.085473] WARNING: possible circular locking dependency detected
<4> [197.091611] 6.8.0-rc7-Patchwork_129026v7-gc4dc92fb1152+ #1 Not tainted
<4> [197.098096] ------------------------------------------------------
<4> [197.104231] prometheus-node/839 is trying to acquire lock:
<4> [197.109680] ffffffff82764d80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc+0x9a/0x350
<4> [197.116939]
but task is already holding lock:
<4> [197.122730] ffff88811b772a40 (&hwmon->hwmon_lock){+.+.}-{3:3}, at: hwm_energy+0x4b/0x100 [i915]
<4> [197.131543]
which lock already depends on the new lock.
...
<4> [197.507922] Chain exists of:
fs_reclaim --> >->reset.mutex --> &hwmon->hwmon_lock
<4> [197.518528] Possible unsafe locking scenario:
<4> [197.524411] CPU0 CPU1
<4> [197.528916] ---- ----
<4> [197.533418] lock(&hwmon->hwmon_lock);
<4> [197.537237] lock(>->reset.mutex);
<4> [197.543376] lock(&hwmon->hwmon_lock);
<4> [197.549682] lock(fs_reclaim);
...
<4> [197.632548] Call Trace:
<4> [197.634990] <TASK>
<4> [197.637088] dump_stack_lvl+0x64/0xb0
<4> [197.640738] check_noncircular+0x15e/0x180
<4> [197.652968] check_prev_add+0xe9/0xce0
<4> [197.656705] __lock_acquire+0x179f/0x2300
<4> [197.660694] lock_acquire+0xd8/0x2d0
<4> [197.673009] fs_reclaim_acquire+0xa1/0xd0
<4> [197.680478] __kmalloc+0x9a/0x350
<4> [197.689063] acpi_ns_internalize_name.part.0+0x4a/0xb0
<4> [197.694170] acpi_ns_get_node_unlocked+0x60/0xf0
<4> [197.720608] acpi_ns_get_node+0x3b/0x60
<4> [197.724428] acpi_get_handle+0x57/0xb0
<4> [197.728164] acpi_has_method+0x20/0x50
<4> [197.731896] acpi_pci_set_power_state+0x43/0x120
<4> [197.736485] pci_power_up+0x24/0x1c0
<4> [197.740047] pci_pm_default_resume_early+0x9/0x30
<4> [197.744725] pci_pm_runtime_resume+0x2d/0x90
<4> [197.753911] __rpm_callback+0x3c/0x110
<4> [197.762586] rpm_callback+0x58/0x70
<4> [197.766064] rpm_resume+0x51e/0x730
<4> [197.769542] rpm_resume+0x267/0x730
<4> [197.773020] rpm_resume+0x267/0x730
<4> [197.776498] rpm_resume+0x267/0x730
<4> [197.779974] __pm_runtime_resume+0x49/0x90
<4> [197.784055] __intel_runtime_pm_get+0x19/0xa0 [i915]
<4> [197.789070] hwm_energy+0x55/0x100 [i915]
<4> [197.793183] hwm_read+0x9a/0x310 [i915]
<4> [197.797124] hwmon_attr_show+0x36/0x120
<4> [197.800946] dev_attr_show+0x15/0x60
<4> [197.804509] sysfs_kf_seq_show+0xb5/0x100
Acquire the wakeref before the lock and hold it as long as the lock is
also held. Follow that pattern across the whole source file where similar
lock inversion can happen.
v2: Keep hardware read under the lock so the whole operation of updating
energy from hardware is still atomic (Guenter),
- instead, acquire the rpm wakeref before the lock and hold it as long
as the lock is held,
- use the same aproach for other similar places across the i915_hwmon.c
source file (Rodrigo).
Fixes: 1b44019a93e2 ("drm/i915/guc: Disable PL1 power limit when loading GuC firmware")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org> # v6.5+
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240311203500.518675-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 71b218771426ea84c0e0148a2b7ac52c1f76e792)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Looks like the undelayed vblank gets signalled exactly when
the active period ends. That is a problem for DSB+VRR when
we are already in vblank and expect DSB to start executing
as soon as we send the push. Instead of starting, the DSB
just keeps on waiting for the undelayed vblank which won't
signal until the end of the next frame's active period,
which is far too late.
The end result is that DSB won't have even started
executing by the time the flips/etc. have completed.
We then wait for an extra 1ms, after which we terminate
the DSB and report a timeout:
[drm] *ERROR* [CRTC:80:pipe A] DSB 0 timed out waiting for idle (current head=0xfedf4000, head=0x0, tail=0x1080)
To fix this let's configure DSB to use the so called VRR
"safe window" instead of the undelayed vblank to trigger
the DSB vblank logic, when VRR is enabled.
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-3-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
(cherry picked from commit 41429d9b68367596eb3d6d5961e6295c284622a7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Looks like TRANS_CHICKEN bit 31 means something totally different
depending on the platform:
TGL: generate VRR "safe window" for DSB
ADL/DG2: make TRANS_SET_CONTEXT_LATENCY effective with VRR
So far we've only set this on ADL/DG2, but when using DSB+VRR
we also need to set it on TGL.
And a quick test on MTL says it doesn't need this bit for either
of those purposes, even though it's still documented as valid
in bspec.
Cc: stable@vger.kernel.org
Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-2-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
(cherry picked from commit 810e4519a1b34b5a0ff0eab32e5b184f533c5ee9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove duplicate checks for debugfs entry "DRRS capable:".
Fixes: 20af10845864 ("drm/i915/display/debugfs: New entry "DRRS capable" to i915_drrs_status")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227123833.2799647-2-bhanuprakash.modem@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 3d81fceb60f20fe2ceed2198636ee6dc9ef46775)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Rename cpu_transcoder_has_drrs() to intel_cpu_transcoder_has_drrs() and
move it to intel_drrs.[ch].
V2:
- Move helpers to intel_drrs.[ch] (Jani)
- Fix commit message (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228055502.2857819-1-bhanuprakash.modem@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 2d04f8158548103c082190c8dbf6a19097e2423e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Applying WA 14018575942 only on Compute engine has impact on
some apps like chrome. Updating this WA to apply on Render
engine as well as it is helping with performance on Chrome.
Note: There is no concern from media team thus not applying
WA on media engines. We will revisit if any issues reported
from media team.
V2(Matt):
- Use correct WA number
Fixes: 668f37e1ee11 ("drm/i915/mtl: Update workaround 14018778641")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com
(cherry picked from commit 71271280175aa0ed6673e40cce7c01296bcd05f6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Reinstate commit 88b065943cb5 ("drm/i915/dsi: Do display on
sequence later on icl+"), for the most part. Turns out some
machines (eg. Chuwi Minibook X) really do need that updated order.
It is also the order the Windows driver uses.
However we can't just undo the revert since that would again
break Lenovo 82TQ. After staring at the VBT sequences for both
machines I've concluded that the Lenovo 82TQ sequences look
somewhat broken:
- INIT_OTP is not present at all
- what should be in INIT_OTP is found in DISPLAY_ON
- what should be in DISPLAY_ON is found in BACKLIGHT_ON
(along with the actual backlight stuff)
The Chuwi Minibook X on the other hand has a full complement
of sequences in its VBT.
So let's try to deal with the broken sequences in the
Lenovo 82TQ VBT by simply swapping the (non-existent)
INIT_OTP sequence with the DISPLAY_ON sequence. Thus we
execute DISPLAY_ON when intending to execute INIT_OTP,
and execute nothing at all when intending to execute
DISPLAY_ON. That should be 100% equivalent to the
revert, for such broken VBTs.
Cc: stable@vger.kernel.org
Fixes: 6992eb815d08 ("Revert "drm/i915/dsi: Do display on sequence later on icl+"")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10334
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305083659.8396-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 94ae4612ea336bfc3c12b3fc68467c6711a4f39b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
AuxCCS framebuffers don't work on Xe driver hence disable them
from plane capabilities until they are fixed. FlatCCS framebuffers
work and they are left enabled. CCS is left untouched for i915
driver.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/933
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228140225.858145-1-juhapekka.heikkila@gmail.com
(cherry picked from commit b7232a730fbf043f54fb46fbf4a6e92936770e79)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Looks like I misplaced a few hunks when I moved the audio
enable/disable out from the encoder enable/disable hooks.
So we are now doing a double audio enable/disable on SDVO
and g4x+ DP. Probably harmless as doing it twice shouldn't
really change anything, but let's do it just once, as intended.
Fixes: cff742cc6851 ("drm/i915: Hoist the encoder->audio_{enable,disable}() calls higher up")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226193251.29619-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 315bd0a0825776d6c66d474bf572db64fa019ad8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add standalone includes for BUG_ON and BUILD_BUG_ON to avoid build failure
after linux-next include refactoring.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308144643.137831-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 4df6ac223cad36e7384ed00fe6efc114279f0df6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
I'm working on improving the __assign_str() and __string() macros to be
more efficient, and removed some unneeded semicolons. This triggered a bug
in the build as some of the __assign_str() macros in intel_display_trace
was missing a terminating semicolon.
Link: https://lore.kernel.org/linux-trace-kernel/20240222133057.2af72a19@gandalf.local.home
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 2ceea5d88048b ("drm/i915: Print plane name in fbc tracepoints")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
Merge changes related to the runtime power management of devices for
6.9-rc1:
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
* pm-runtime:
Documentation: PM: Fix runtime_pm.rst markdown syntax
PM: runtime: add tracepoint for runtime_status changes
PM: runtime: Add pm_runtime_put_autosuspend() replacement
PM: runtime: Simplify pm_runtime_get_if_active() usage
|
|
Backmerging to get a few more commits that came from drm-misc-next.
See [1]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/20240229084806.GA21616@localhost.localdomain/ # 1
|
|
Move psr_init_dpcd() from init-connector to connector-detect
function. The dpcd probe for checking panel replay capability
for external dp connector is causing delay during boot which can
be optimized by moving dpcd probe to connector specific detect().
v1: Initial version.
v2: Add details in commit description. [Jani]
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10284
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Fixes: cceeaa312d39 ("drm/i915/panelreplay: Enable panel replay dpcd initialization for DP")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229043716.4065760-1-animesh.manna@intel.com
(cherry picked from commit 1cca19bf296fae0636a637b48d195ac6b4d430c9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The DSC HW state of DP connectors is read out during driver loading and
system resume in intel_modeset_update_connector_atomic_state(). This
function is called for all connectors though and so the state of DSI
connectors will also get updated incorrectly, triggering a WARN there
wrt. the DSC decompression AUX device.
Fix the above by moving the DSC state readout to a new DP connector
specific sync_state() hook. This is anyway the logical place to update
the connector object's state vs. the connector's atomic state.
Fixes: b2608c6b3212 ("drm/i915/dp_mst: Enable MST DSC decompression for all streams")
Reported-and-tested-by: Drew Davenport <ddavenport@chromium.org>
Closes: https://lore.kernel.org/all/Zb0q8IDVXS0HxJyj@chromium.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205132631.1588577-1-imre.deak@intel.com
(cherry picked from commit a62e145981500996ea76af3d740ce0c0d74c5be0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Third argument of i915_request_wait() accepts a timeout value in jiffies.
Most users pass either a simple HZ based expression, or a result of
msecs_to_jiffies(), or MAX_SCHEDULE_TIMEOUT, or a very small number not
exceeding 4 if applicable as that value. However, there is one user --
intel_selftest_wait_for_rq() -- that passes a WAIT_FOR_RESET_TIME symbol,
defined as a large constant value that most probably represents a desired
timeout in ms. While that usage results in the intended value of timeout
on usual x86_64 kernel configurations, it is not portable across different
architectures and custom kernel configs.
Rename the symbol to clearly indicate intended units and convert it to
jiffies before use.
Fixes: 3a4bfa091c46 ("drm/i915/selftest: Fix workarounds selftest for GuC submission")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222113347.648945-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 6ee3f54b880c91ab2e244eb4ffd4bfed37832b25)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The icl+ power well code currently assumes that every AUX power
well maps to an encoder which is using said power well. That is
by no menas guaranteed as we:
- only register encoders for ports declared in the VBT
- combo PHY HDMI-only encoder no longer get an AUX CH since
commit 9856308c94ca ("drm/i915: Only populate aux_ch if really needed")
However we have places such as intel_power_domains_sanitize_state()
that blindly traverse all the possible power wells. So these bits
of code may very well encounbter an aux power well with no associated
encoder.
In this particular case the BIOS seems to have left one AUX power
well enabled even though we're dealing with a HDMI only encoder
on a combo PHY. We then proceed to turn off said power well and
explode when we can't find a matching encoder. As a short term fix
we should be able to just skip the PHY related parts of the power
well programming since we know this situation can only happen with
combo PHYs.
Another option might be to go back to always picking an AUX CH for
all encoders. However I'm a bit wary about that since we might in
theory end up conflicting with the VBT AUX CH assignment. Also
that wouldn't help with encoders not declared in the VBT, should
we ever need to poke the corresponding power wells.
Longer term we need to figure out what the actual relationship
is between the PHY vs. AUX CH vs. AUX power well. Currently this
is entirely unclear.
Cc: stable@vger.kernel.org
Fixes: 9856308c94ca ("drm/i915: Only populate aux_ch if really needed")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10184
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 6a8c66bf0e565c34ad0a18f820e0bb17951f7f91)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|