summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/meson/meson_vclk.h
AgeCommit message (Collapse)Author
2020-05-05drm/meson: add mode selection limits against specific SoC revisionsNeil Armstrong
The Amlogic S805X/Y uses the same die as the S905X, but with more limited graphics capabilities. This adds a soc version detection adding specific limitations on the HDMI mode selections. Here, we limit to HDMI 1.2a max HDMI PHY clock frequency. Changes sinces v1: - Moved frequency check in the vclk code, and also checks DMT modes Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [narmstrong: fixed commit message with HDMI 1.2a instead of HDMI 1.3a] Link: https://patchwork.freedesktop.org/patch/msgid/20200428092147.13698-1-narmstrong@baylibre.com
2020-03-10drm/meson: vclk: add support for YUV420 setupNeil Armstrong
This patch adds clocking support for the YUV420 output from the Amlogic Meson SoCs Video Processing Unit to the HDMI Controller. The YUV420 is obtained by generating a YUV444 pixel stream like the classic HDMI display modes, but then the Video Encoder output can be configured to down-sample the YUV444 pixel stream to a YUV420 stream. This mode needs a different clock generation scheme since the TMDS PHY clock must match the 10x ratio with the YUV420 pixel clock, but the video encoder must run at 2x the pixel clock. This patch adds the TMDS PHY clock value in all the video clock setup in order to better support these specific uses cases and switch to the Common Clock framework for clocks handling in the future. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-11-narmstrong@baylibre.com
2019-07-17drm/meson: drop use of drmP.hSam Ravnborg
Drop use of the deprecated drmP.h header. While doing so used the opportunity to clean up a little so includes are now sorted and removed unused include files. In a few cases added some forwards to allow header files to built in different include order. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Maxime Jourdan <mjourdan@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-2-sam@ravnborg.org
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27drm/meson: Add support for VIC alternate timingsNeil Armstrong
This change is an attempt to handle the alternate clock for the CEA mode. 60Hz vs. 59.94Hz, 30Hz vs 29.97Hz or 24Hz vs 23.97Hz on the Amlogic Meson SoC DRM Driver pixel clock generation. The actual clock generation will be moved to the Common Clock framework once all the video clock are handled by the Amlogic Meson SoC clock driver, then these alternate timings will be handled in the same time in a cleaner fashion. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com> [narmstrong: fix maybe-uninitialized warnings after applying] Link: https://patchwork.freedesktop.org/patch/msgid/1541501675-3928-1-git-send-email-narmstrong@baylibre.com
2018-07-16drm/meson: Make DMT timings parameters and pixel clock genericNeil Armstrong
Remove the modes timings tables for DMT modes and calculate the HW paremeters from the modes timings. Switch the DMT modes pixel clock calculation out of the static frequency list to a generic calculation from a range of possible PLL dividers. This patch is an intermediate step towards usage of the Common Clock Framwework for PLL setup, by reworking the code to have common sel_pll() function called by the CEA (HDMI) freq setup and the generic DMT frequencies setup, we should be able to simply call clk_set_rate() on the PLL clock handle in a near future. The CEA (HDMI) and CVBS modes needs very specific clock paths that CCF will never be able to determine by itself, so there is still some work to do for a full handoff to CCF handling the clocks. This setup permits setting non-CEA modes like : - 1600x900-60Hz - 1280x1024-75Hz - 1280x1024-60Hz - 1440x900-60Hz - 1366x768-60Hz - 1280x800-60Hz - 1152x864-75Hz - 1024x768-75Hz - 1024x768-70Hz - 1024x768-60Hz - 832x624-75Hz - 800x600-75Hz - 800x600-72Hz - 800x600-60Hz - 640x480-75Hz - 640x480-73Hz - 640x480-67Hz Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: fixed trivial checkpatch issues] Link: https://patchwork.freedesktop.org/patch/msgid/1531726814-14638-1-git-send-email-narmstrong@baylibre.com
2017-04-04drm/meson: add support for HDMI clock supportNeil Armstrong
This patchs adds support for the supported HDMI modes clocks frequencies. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-12-01drm: Add support for Amlogic Meson Graphic ControllerNeil Armstrong
The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>