summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/meson
AgeCommit message (Collapse)Author
2020-03-10drm/meson: Add YUV420 output supportNeil Armstrong
This patch adds support for the YUV420 output from the Amlogic Meson SoCs Video Processing Unit to the HDMI Controller. The YUV420 is obtained by generating a YUV444 pixel stream like the classic HDMI display modes, but then the Video Encoder output can be configured to down-sample the YUV444 pixel stream to a YUV420 stream. In addition if pixel stream down-sampling, the Y Cb Cr components must also be mapped differently to align with the HDMI2.0 specifications. This mode needs a different clock generation scheme since the TMDS PHY clock must match the 10x ratio with the YUV420 pixel clock, but the video encoder must run at 2x the pixel clock. This patch enables the bridge bus format negociation, and handles the YUV420 case if selected by the negociation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-12-narmstrong@baylibre.com
2020-03-10drm/meson: vclk: add support for YUV420 setupNeil Armstrong
This patch adds clocking support for the YUV420 output from the Amlogic Meson SoCs Video Processing Unit to the HDMI Controller. The YUV420 is obtained by generating a YUV444 pixel stream like the classic HDMI display modes, but then the Video Encoder output can be configured to down-sample the YUV444 pixel stream to a YUV420 stream. This mode needs a different clock generation scheme since the TMDS PHY clock must match the 10x ratio with the YUV420 pixel clock, but the video encoder must run at 2x the pixel clock. This patch adds the TMDS PHY clock value in all the video clock setup in order to better support these specific uses cases and switch to the Common Clock framework for clocks handling in the future. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-11-narmstrong@baylibre.com
2020-03-10drm/meson: venc: add support for YUV420 setupNeil Armstrong
This patch adds encoding support for the YUV420 output from the Amlogic Meson SoCs Video Processing Unit to the HDMI Controller. The YUV420 is obtained by generating a YUV444 pixel stream like the classic HDMI display modes, but then the Video Encoder output can be configured to down-sample the YUV444 pixel stream to a YUV420 stream. In addition if pixel stream down-sampling, the Y Cb Cr components must also be mapped differently to align with the HDMI2.0 specifications. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-10-narmstrong@baylibre.com
2020-03-10drm/meson: dw-hdmi: stop enforcing input_bus_formatNeil Armstrong
To allow using formats from negotiation, stop enforcing input_bus_format in the private dw-plat-data struct. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-9-narmstrong@baylibre.com
2020-03-10drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcsNeil Armstrong
Switch the dw-hdmi driver to drm_bridge_funcs by implementing a new local bridge, connecting it to the dw-hdmi bridge, then implement the atomic_get_input_bus_fmts/atomic_get_output_bus_fmts. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-8-narmstrong@baylibre.com
2020-03-10drm/meson: venc: make drm_display_mode constNeil Armstrong
Before switching to bridge funcs, make sure drm_display_mode is passed as const to the venc functions. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-7-narmstrong@baylibre.com
2020-01-08drm: meson: fix address type confusionArnd Bergmann
Casting a pointer to dma_addr_t produces a warning: drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free': drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] priv->rdma.addr_phys = (dma_addr_t)NULL; In this case, it's worse because the variable name has the suffix '_phys', which often indicates a phys_addr_t rather than dma_addr_t, i.e. yet another incompatible type. Change it to use consistent naming and avoid NULL. Fixes: 63fba242c464 ("drm/meson: add RDMA module driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de
2020-01-06drm: meson: Remove unneeded semicolonzhengbin
Fixes coccicheck warning: drivers/gpu/drm/meson/meson_crtc.c:360:3-4: Unneeded semicolon drivers/gpu/drm/meson/meson_plane.c:181:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1576468701-69717-1-git-send-email-zhengbin13@huawei.com
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-12Merge tag 'drm-misc-fixes-2019-12-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Expand dma-buf MAINTAINER scope - Fix mode matching for drivers not using picture_aspect_ratio Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191211212107.GA257983@art_vandelay
2019-12-10drm/meson: crtc: add OSD1 plane AFBC commitNeil Armstrong
Finally, setup the VIU registers and start the AFBC decoder to support displaying AFBC encoded buffers on Amlogic GXM and G12A SoCs. The RDMA is used here to reset and program the AFBC decoder unit on each vsync without involving the interrupt handler that can be masked for a long period of time, producing display glitches. The vsync irq must still be left enabled otherwise the RDMA modules isn't trigerred when the interrupt line is masked. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-10-narmstrong@baylibre.com
2019-12-10drm/meson: hold 32 lines after vsync to give time for AFBC startNeil Armstrong
When using an AFBC encoded frame, the AFBC Decoder must be reset, configured and enabled at each vsync IRQ. To leave time for that, use the maximum lines hold time to give time for AFBC setup and avoid visual glitches. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fix typo in commit log] Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-9-narmstrong@baylibre.com
2019-12-10drm/meson: viu: add AFBC modules routing functionsNeil Armstrong
The Amlogic G12A AFBC Decoder pixel input need to be routed diferently than the Amlogic GXM AFBC decoder, this adds support for routing the VIU OSD1 pixel source to the AFBC "Mali Unpack" module. This "Mali Unpack" module is also configured with a static RGBA mapping for now until we support more pixel formats. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-8-narmstrong@baylibre.com
2019-12-10drm/meson: plane: add support for AFBC mode for OSD1 planeNeil Armstrong
This adds all the OSD configuration plumbing to support the AFBC decoders path to display of the OSD1 plane. The Amlogic GXM and G12A AFBC decoders are integrated very differently. The Amlogic GXM has a direct output path to the OSD1 VIU pixel input, because the GXM AFBC decoder seem to be a custom IP developed by Amlogic. On the other side, the Amlogic G12A AFBC decoder seems to be an external IP that emit pixels on an AXI master hooked to a "Mali Unpack" block feeding the OSD1 VIU pixel input. This uses a weird "0x1000000" internal HW physical address on both sides to transfer the pixels. For Amlogic GXM, the supported pixel formats are the same as the normal linear OSD1 mode. On the other side, Amlogic added support for all AFBC v1.2 formats for the G12A AFBC integration. For simplicity, we stick to the already supported formats for now. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-7-narmstrong@baylibre.com
2019-12-10drm/meson: Add AFBCD module driverNeil Armstrong
This adds the driver for the ARM Framebuffer Compression decoders found in the Amlogic GXM and G12A SoCs. The Amlogic GXM and G12A AFBC decoder are totally different, the GXM only handling only the AFBC v1.0 modes and the G12A decoder handling the AFBC v1.2 modes. The G12A AFBC decoder is an external IP integrated in the video pipeline, and the GXM AFBC decoder seems to the an Amlogic custom decoder more tighly integrated in the video pipeline. The GXM AFBC decoder can handle only one AFBC plane for 2 available OSD planes available in HW, and the G12A AFBC decoder can handle up to 4 AFBC planes for up to 3 OSD planes available in HW. The Amlogic GXM supports 16x16 SPARSE and 16x16 SPLIT AFBC buffers up to 4k. On the other side, for G12A SPLIT is mandatory in 16x16 block mode, but for 4k modes 32x8+SPLIT AFBC buffers is manadatory for performances reasons. The RDMA is used here to reset and program the AFBC decoder unit on each vsync without involving the interrupt handler that can be masked for a long period of time, producing display glitches. For this we use the meson_rdma_writel_sync() which adds the register write tuple (VPU register offset and register value) to the RDMA buffer and write the value to the HW. When enabled, the RDMA is enabled to rewrite the same sequence at the next VSYNC event, until a new buffer is committed to the OSD plane. Then the Amlogic G12A is switched to RDMA, the Amlogic GXM Decoder doesn't need a reset/reprogram at each vsync, but needs to keep the vsync interrupt enabled to trigger the RDMA module. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fixed typo in commit log] Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-6-narmstrong@baylibre.com
2019-12-10drm/meson: add RDMA module driverNeil Armstrong
The VPU embeds a "Register DMA" that can write a sequence of registers on the VPU AHB bus, either manually or triggered by an internal IRQ event like VSYNC or a line input counter. The initial implementation handles a single channel (over 8), triggered by the VSYNC irq and does not handle the RDMA irq. The RDMA will be usefull to reset and program the AFBC decoder unit on each vsync without involving the interrupt handler that can be masked for a log period of time, producing display glitches. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-5-narmstrong@baylibre.com
2019-12-10drm/meson: store the framebuffer width for plane commitNeil Armstrong
Also store the framebuffer width in the private common struct to be used by the AFBC decoder module driver when committing the AFBC plane. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-4-narmstrong@baylibre.com
2019-12-10drm/meson: add RDMA register bits definesNeil Armstrong
The Amlogic VPU embeds a "Register DMA" that can write a sequence of registers on the VPU AHB bus, either manually or triggered by an internal IRQ event like VSYNC or a line input counter. This adds the register defines. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-3-narmstrong@baylibre.com
2019-12-10drm/meson: add AFBC decoder registers for GXM and G12ANeil Armstrong
Add the registers used to program the ARM Framebuffer Compression decoders used in the Amlogic GXM and G12A SoCs families. This also adds the routing and pipeline configuration bits and registers needed to enable AFBC support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-2-narmstrong@baylibre.com
2019-12-09drm: meson: venc: cvbs: fix CVBS mode matchingMartin Blumenstingl
With commit 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer") the drm core started honoring the picture_aspect_ratio field when comparing two drm_display_modes. Prior to that it was ignored. When the CVBS encoder driver was initially submitted there was no aspect ratio check. Switch from drm_mode_equal() to drm_mode_match() without DRM_MODE_MATCH_ASPECT_RATIO to fix "kmscube" and X.org output using the CVBS connector. When (for example) kmscube sets the output mode when using the CVBS connector it passes HDMI_PICTURE_ASPECT_NONE, making the drm_mode_equal() fail as it include the aspect ratio. Prior to this patch kmscube reported: failed to set mode: Invalid argument The CVBS mode checking in the sun4i (drivers/gpu/drm/sun4i/sun4i_tv.c sun4i_tv_mode_to_drm_mode) and ZTE (drivers/gpu/drm/zte/zx_tvenc.c tvenc_mode_{pal,ntsc}) drivers don't set the "picture_aspect_ratio" at all. The Meson VPU driver does not rely on the aspect ratio for the CVBS output so we can safely decouple it from the hdmi_picture_aspect setting. Cc: <stable@vger.kernel.org> Fixes: 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer") Fixes: bbbe775ec5b5da ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: squashed with drm: meson: venc: cvbs: deduplicate the meson_cvbs_mode lookup code] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191208171832.1064772-3-martin.blumenstingl@googlemail.com
2019-10-10drm/meson: Enable DRM InfoFrame support on GXL, GXM and G12AJonas Karlman
This patch enables Dynamic Range and Mastering InfoFrame on GXL, GXM and G12A. Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/HE1PR06MB4011BB614A49253FD074BCCBAC9B0@HE1PR06MB4011.eurprd06.prod.outlook.com
2019-09-30drm/meson: vclk: use the correct G12A frac max valueNeil Armstrong
When calculating the HDMI PLL settings for a DMT mode PHY frequency, use the correct max fractional PLL value for G12A VPU. With this fix, we can finally setup the 1024x768-60 mode. Fixes: 202b9808f8ed ("drm/meson: Add G12A Video Clock setup") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190828132311.23881-1-narmstrong@baylibre.com
2019-08-28drm/meson: add resume/suspend hooksNeil Armstrong
Add the suspend and resume hooks to: - save and disable the entire DRM driver on suspend - re-init the entire VPU subsystem on resume, to recover CRTC and pixel generator functionnal usage after DDR suspend, then recover DRM driver state Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-3-narmstrong@baylibre.com
2019-08-28drm/meson: dw_hdmi: add resume/suspend hooksNeil Armstrong
Add the suspend and resume hooks to: - reset the whole HDMI glue and HDMI controller on suspend - re-init the HDMI glue and HDMI controller on resume The HDMI glue init is refactored to be re-used from the resume hook. It makes usage of dw_hdmi_resume() to recover a functionnal DDC bus. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fixed typo in commit log, and rebased on drm-misc-next] Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-2-narmstrong@baylibre.com
2019-08-22drm: meson: use match data to detect vpu compatibilityJulien Masson
This patch introduce new enum which contains all VPU family (GXBB, GXL, GXM and G12A). This enum is used to detect the VPU compatible with the device. We only need to set .data to the corresponding enum in the device table, no need to check .compatible string anymore. Signed-off-by: Julien Masson <jmasson@baylibre.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/87imqpz21w.fsf@masson.i-did-not-set--mail-host-address--so-tickle-me
2019-08-09drm: meson: venc: set the correct macrovision max amplitude valueJulien Masson
According to the register description of ENCI_MACV_MAX_AMP, the macrovision max amplitude value should be: - hdmi 480i => 0xb - hdmi 576i => 0x7 The max value is 0x7ff (10 bits). Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86mui782dt.fsf@baylibre.com
2019-08-09drm: meson: add macro used to enable HDMI PLLJulien Masson
This patch add new macro HHI_HDMI_PLL_CNTL_EN which is used to enable HDMI PLL. Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86o92n82e1.fsf@baylibre.com
2019-08-09drm: meson: global clean-upJulien Masson
This patch aims to: - Add general and TODO comments - Respect coding style for multi-line comments - Align macro definitions - Remove useless macro Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86pnn382e8.fsf@baylibre.com
2019-08-09drm: meson: venc: use proper macros instead of magic constantsJulien Masson
This patch add new macros which are used to set the following registers: - ENCI_CFILT_CTRL - ENCI_CFILT_CTRL2 - ENCI_MACV_MAX_AMP - ENCI_VIDEO_MODE_ADV - ENCI_VFIFO2VD_CTL - ENCI_VIDEO_EN - ENCP_VIDEO_MODE - VPU_HDMI_SETTING - VENC_UPSAMPLE_CTRL0 - VENC_UPSAMPLE_CTRL1 - VENC_UPSAMPLE_CTRL2 - VENC_VDAC_FIFO_CTRL - VENC_VDAC_DAC0_FILT_CTRL0 - VENC_INTCTRL Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86r27j82ef.fsf@baylibre.com
2019-08-09drm: meson: viu: use proper macros instead of magic constantsJulien Masson
This patch add new macros which are used to set the following registers: - VIU_SW_RESET - VIU_OSD1_CTRL_STAT - VIU_OSD2_CTRL_STAT - VIU_OSD1_FIFO_CTRL_STAT - VIU_OSD2_FIFO_CTRL_STAT - VIU_MISC_CTRL0 - VIU_OSD_BLEND_CTRL - OSD1_BLEND_SRC_CTRL - OSD2_BLEND_SRC_CTRL - DOLBY_PATH_CTRL Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fix OSD1_BLEND_SRC_CTRL register init value for G12A] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86sgrz82em.fsf@baylibre.com
2019-08-09drm: meson: vpp: use proper macros instead of magic constantsJulien Masson
This patch add new macros which are used to set the following registers: - VPP_OSD_SCALE_COEF_IDX - VPP_DOLBY_CTRL - VPP_OFIFO_SIZE - VPP_HOLD_LINES - VPP_SC_MISC - VPP_VADJ_CTRL Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: put back 0x1020080 in VPP_DUMMY_DATA1 for GXM] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86tvcf82eu.fsf@baylibre.com
2019-08-09drm: meson: drv: use macro when initializing vpuJulien Masson
This patch add new macro which is used to set WRARB/RDARB mode of the VPU. Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86v9wv82f1.fsf@baylibre.com
2019-08-09drm: meson: crtc: use proper macros instead of magic constantsJulien Masson
This patch add new macros which describe couple bits field of the following registers: - VD1_BLEND_SRC_CTRL - VPP_SC_MISC Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86wohb82fa.fsf@baylibre.com
2019-08-09drm: meson: mask value when writing bits relaxedJulien Masson
The value used in the macro writel_bits_relaxed has to be masked since we don't want change the bits outside the mask. Signed-off-by: Julien Masson <jmasson@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/86y31r82fo.fsf@baylibre.com
2019-07-17drm/meson: drop use of drmP.hSam Ravnborg
Drop use of the deprecated drmP.h header. While doing so used the opportunity to clean up a little so includes are now sorted and removed unused include files. In a few cases added some forwards to allow header files to built in different include order. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Maxime Jourdan <mjourdan@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-2-sam@ravnborg.org
2019-06-21drm/meson: Drop drm_gem_prime_export/importDaniel Vetter
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-21-daniel.vetter@ffwll.ch
2019-06-21drm/prime: Actually remove DRIVER_PRIME everywhereDaniel Vetter
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
2019-06-19Merge v5.2-rc5 into drm-nextDaniel Vetter
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-06-14Merge tag 'drm-misc-fixes-2019-06-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Sean writes: meson: A few G12A fixes across the driver (Neil) quirks: A couple quirks for GPD devices (Hans) gem_shmem: Use writecombine when vmapping non-dmabuf BOs (Boris) panfrost: A couple tweaks to requiring devfreq (Neil & Ezequiel) edid: Ensure we return the override mode when ddc probe fails (Jani) Cc: Hans de Goede <hdegoede@redhat.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190613143946.GA24233@art_vandelay
2019-06-07drm/meson: Add support for XBGR8888 & ABGR8888 formatsNeil Armstrong
Add missing XBGR8888 & ABGR8888 formats variants from the primary plane. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190429075238.7884-1-narmstrong@baylibre.com
2019-06-07drm/meson: Add zpos immutable property to planesNeil Armstrong
Add immutable zpos property to primary and overlay planes to specify the current fixed zpos position. Fixes: f9a2348196d1 ("drm/meson: Support Overlay plane for video rendering") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190429075247.7946-1-narmstrong@baylibre.com
2019-06-07drm/meson: fix G12A primary plane disablingNeil Armstrong
The G12A Primary plane was disabled by writing in the OSD1 configuration registers, but this caused the plane blender to stall instead of continuing to blend only the overlay plane. Fix this by disabling the OSD1 plane in the blender registers, and also enabling it back using the same register. Fixes: 490f50c109d1 ("drm/meson: Add G12A support for OSD1 Plane") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fixed nit in commit log] Link: https://patchwork.freedesktop.org/patch/msgid/20190605141253.24165-3-narmstrong@baylibre.com
2019-06-07drm/meson: fix primary plane disablingNeil Armstrong
The primary plane disable logic is flawed, when the primary plane is disabled, it is re-enabled in the vsync irq when another plane is updated. Handle the plane disabling correctly by handling the primary plane enable flag in the primary plane update & disable callbacks. Fixes: 490f50c109d1 ("drm/meson: Add G12A support for OSD1 Plane") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605141253.24165-2-narmstrong@baylibre.com
2019-06-07drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variationsNeil Armstrong
The Amlogic G12A HDMI PLL needs some specific settings to lock with different fractional values for the 5,4GHz mode. Handle the 1000/1001 variation fractional case here to avoid having the PLL in an non lockable state. Fixes: 202b9808f8ed ("drm/meson: Add G12A Video Clock setup") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605125320.8708-1-narmstrong@baylibre.com
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
This picks up rc2 for us as well. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-05-28Merge tag 'drm-misc-next-2019-05-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3, try #2: UAPI Changes: - Add HDR source metadata property. - Make drm.h compile on GNU/kFreeBSD by including stdint.h - Clarify how the userspace reviewer has to review new kernel UAPI. - Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough. Cross-subsystem Changes: - video/hdmi: Add unpack function for DRM infoframes. - Device tree bindings: * Updating a property for Mali Midgard GPUs * Updating a property for STM32 DSI panel * Adding support for FriendlyELEC HD702E 800x1280 panel * Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel * Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT. * Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel with resistive touch found on TI's AM335X-EVM. * Adding support for EDT ETM0430G0DH6 480x272 panel. - Add OSD101T2587-53TS driver with DT bindings. - Add Samsung S6E63M0 panel driver with DT bindings. - Add VXT VL050-8048NT-C01 800x480 panel with DT bindings. - Dma-buf: - Make mmap callback actually optional. - Documentation updates. - Fix debugfs refcount inbalance. - Remove unused sync_dump function. - Fix device tree bindings in drm-misc-next after a botched merge. Core Changes: - Add support for HDR infoframes and related EDID parsing. - Remove prime sg_table caching, now done inside dma-buf. - Add shiny new drm_gem_vram helpers for simple VRAM drivers; with some fixes to the new API on top. - Small fix to job cleanup without timeout handler. - Documentation fixes to drm_fourcc. - Replace lookups of drm_format with struct drm_format_info; remove functions that become obsolete by this conversion. - Remove double include in bridge/panel.c and some drivers. - Remove drmP.h include from drm/edid and drm/dp. - Fix null pointer deref in drm_fb_helper_hotplug_event(). - Remove most members from drm_fb_helper_crtc, only mode_set is kept. - Remove race of fb helpers with userspace; only restore mode when userspace is not master. - Move legacy setup from drm_file.c to drm_legacy_misc.c - Rework scheduler job destruction. - drm/bus was removed, remove from TODO. - Add __drm_atomic_helper_crtc_reset() to subclass crtc_state, and convert some drivers to use it (conversion is not complete yet). - Bump vblank timeout wait to 100 ms for atomic. - Docbook fix for drm_hdmi_infoframe_set_hdr_metadata. Driver Changes: - sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually. - v3d: Small cleanups, adding support for compute shaders, reservation/synchronization fixes and job management refactoring, fixes MMU and debugfs. - lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs. - stm/ltdc: Assorted fixes and adding FB modifier support. - amdgpu: Avoid hw reset if guilty job was already signaled. - virtio: Add seqno to fences, add trace events, use correct flags for fence allocation. - Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API. - sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers. - bochs: Small fix to use PTR_RET_OR_ZERO and driver unload. - gma500: header fixes - cirrus: Remove unused files. - mediatek: Fix compiler warning after merging the HDR series. - vc4: Rework binner bo handling. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/052875a5-27ba-3832-60c2-193d950afdff@linux.intel.com
2019-05-24drm/meson: imply dw-hdmi i2s audio for meson hdmiJerome Brunet
Imply the i2s part of the Synopsys HDMI driver for Amlogic SoCs. This will enable the i2s part by default when meson hdmi driver is enable but let platforms not supported by the audio subsystem disable it if necessary. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190429102325.29022-1-jbrunet@baylibre.com
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-05-25 23:28:46 +0000