summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/disp
AgeCommit message (Collapse)Author
2023-01-13Merge tag 'drm-msm-fixes-2023-01-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.3-rc4 Display Fixes: - Fix the documentation for dpu_encoder_phys_wb_init() and dpu_encoder_phys_wb_setup_fb() APIs to address doc warnings - Remove vcca-supply and vdds-supply as mandatory for 14nm PHY and 10nm PHY DT schemas respectively as they are not present on some SOCs using these PHYs - Add the dsi-phy-regulator-ldo-mode to dsi-phy-28nm.yaml as it was missed out during txt to yaml migration - Remove operating-points-v2 and power-domain as a required property for the DSI controller as thats not the case for every SOC - Fix the description from display escape clock to display core clock in the dsi controller yaml - Fix the memory leak for mdp1-mem path for the cases when we return early after failing to get mdp0-mem ICC paths for msm - Fix error handling path in msm_hdmi_dev_probe() to release the phy ref count when devm_pm_runtime_enable() fails - Fix the dp_aux_isr() routine to make sure it doesnt incorrectly signal the aux transaction as complete if the ISR was not an AUX isr. This fixes a big hitter stability bug on chromebooks. - Add protection against null pointer dereference when there is no kms object as in the case of headless adreno GPU in the shutdown path. GPU Fixes: - a5xx: fix quirks to actually be a bitmask and not overwrite each other - a6xx: fix gx halt sequence to avoid 1000ms hang on some devices - kexec shutdown fix - fix potential double free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv7=in_MHW3kdkhqh7ZFoVCmnikmr29YYHCXR=7aOEneg@mail.gmail.com
2022-12-27drm/msm/dpu: Fix some kernel-doc commentsYang Li
Make the description of @init to @p in dpu_encoder_phys_wb_init() and remove @wb_roi in dpu_encoder_phys_wb_setup_fb() to clear the below warnings: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:139: warning: Excess function parameter 'wb_roi' description in 'dpu_encoder_phys_wb_setup_fb' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Function parameter or member 'p' not described in 'dpu_encoder_phys_wb_init' drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:699: warning: Excess function parameter 'init' description in 'dpu_encoder_phys_wb_init' Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3067 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/511605/ Link: https://lore.kernel.org/r/20221115014902.45240-1-yang.lee@linux.alibaba.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-11-30Merge tag 'drm-msm-display-for-6.2' of ↵Dave Airlie
https://gitlab.freedesktop.org/lumag/msm into drm-next drm/msm updates for 6.2 Core: - MSM_INFO_GET_FLAGS support - Cleaned up MSM IOMMU wrapper code DPU: - Added support for XR30 and P010 image formats - Reworked MDSS/DPU schema, added SM8250 MDSS bindings - Added Qualcomm SM6115 support DP: - Dropped unsane sanity checks DSI: - Fix calculation of DSC pps payload DSI PHY: - DSI PHY support for QCM2290 HDMI: - Reworked dev init path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221126102141.721353-1-dmitry.baryshkov@linaro.org
2022-11-26Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag Core: - MSM_INFO_GET_FLAGS support - Cleaned up MSM IOMMU wrapper code DPU: - Added support for XR30 and P010 image formats - Reworked MDSS/DPU schema, added SM8250 MDSS bindings - Added Qualcomm SM6115 support DP: - Dropped unsane sanity checks DSI: - Fix calculation of DSC pps payload DSI PHY: - DSI PHY support for QCM2290 HDMI: - Reworked dev init path And, as usual, small misc fixes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-26drm/msm/disp/dpu1: add support for display on SM6115Adam Skladowski
Add required display hw catalog changes for SM6115. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/512875/ Link: https://lore.kernel.org/r/20221124001708.25720-3-a39.skl@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-26drm/msm/mdp5: fix reading hw revision on db410c platformDmitry Baryshkov
Since the commit commit c6122688f265 ("drm/msm/mdp5: stop overriding drvdata") reading the MDP5 hw revision on db410c will crash the board as the MDSS_GDSC is not enabled. Revert a part of the offending commit (moving rpm enablement) and set priv->kms earlier. This make it possible to use pm_runtime_get_sync() during read_mdp_hw_revision(), which will power up both the MDP5 and MDSS devices. Fixes: c6122688f265 ("drm/msm/mdp5: stop overriding drvdata") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/512985/ Link: https://lore.kernel.org/r/20221125000213.252115-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-24Backmerge tag 'v6.1-rc6' into drm-nextDave Airlie
Linux 6.1-rc6 This is needed for drm-misc-next and tegra. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-12drm/msm: Use drm_mode_init() for on-stack modesVille Syrjälä
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head, or that we aren't copying over another mode's list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-4-ville.syrjala@linux.intel.com
2022-11-04drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional bitsMarijn Suijten
According to the comment this DPU register contains the bits per pixel as a 6.4 fractional value, conveniently matching the contents of bits_per_pixel in struct drm_dsc_config which also uses 4 fractional bits. However, the downstream source this implementation was copy-pasted from has its bpp field stored _without_ fractional part. This makes the entire convoluted math obsolete as it is impossible to pull those 4 fractional bits out of thin air, by somehow trying to reuse the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??). The rest of the code merely attempts to keep the integer part a multiple of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel << 12; already filling up those bits anyway (but not on downstream). Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/508946/ Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional bitsMarijn Suijten
According to the comment this DPU register contains the bits per pixel as a 6.4 fractional value, conveniently matching the contents of bits_per_pixel in struct drm_dsc_config which also uses 4 fractional bits. However, the downstream source this implementation was copy-pasted from has its bpp field stored _without_ fractional part. This makes the entire convoluted math obsolete as it is impossible to pull those 4 fractional bits out of thin air, by somehow trying to reuse the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??). The rest of the code merely attempts to keep the integer part a multiple of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel << 12; already filling up those bits anyway (but not on downstream). Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/508946/ Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-03drm/msm: move domain allocation into msm_iommu_new()Dmitry Baryshkov
After the msm_iommu instance is created, the IOMMU domain is completely handled inside the msm_iommu code. Move the iommu_domain_alloc() call into the msm_iommu_new() to simplify callers code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/509615/ Link: https://lore.kernel.org/r/20221102175449.452283-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: Refactor sc7280_pp locationRobert Foss
The sc7280_pp declaration is not located by the other _pp declarations, but rather hidden around the _merge_3d declarations. Let's fix this to avoid confusion. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/509153/ Link: https://lore.kernel.org/r/20221028120812.339100-3-robert.foss@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: use DEFINE_SHOW_ATTRIBUTE to simplify dpu_regset32Liu Shixin
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No functional change. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/504252/ Link: https://lore.kernel.org/r/20220922142147.3246649-1-liushixin2@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/mdp5: stop overriding drvdataDmitry Baryshkov
The rest of the code expects that master's device drvdata is the struct msm_drm_private instance. Do not override the mdp5's drvdata. Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/508334/ Link: https://lore.kernel.org/r/20221024152642.3213488-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: Add support for P010 formatJessica Zhang
Add support for P010 color format. This adds support for both linear and compressed formats. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/500822/ Link: https://lore.kernel.org/r/20220901203422.217-3-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dpu: Add support for XR30 formatJessica Zhang
Add support for XR30 color format. This supports both linear and compressed formats. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/500820/ Link: https://lore.kernel.org/r/20220901203422.217-2-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-09-30drm/msm: Fix return type of mdp4_lvds_connector_mode_validNathan Huckleberry
The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of mdp4_lvds_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Fixes: 3e87599b68e7 ("drm/msm/mdp4: add LVDS panel support") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/502878/ Link: https://lore.kernel.org/r/20220913205551.155128-1-nhuck@google.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-09-18drm/msm/dpu: get rid of cached flush_maskDmitry Baryshkov
Instead of querying the CTL for the flush mask (for SSPP, LM or DSPP), storing the mask in the mixer configuration and then pushing the mask to the CTL, tell CTL to cache the flush in place. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473159/ Link: https://lore.kernel.org/r/20220209172520.3719906-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: inline dpu_plane_get_ctl_flushDmitry Baryshkov
There is no need to keep a separate function for calling into the ctl if we already know all the details. Inline this function in the dpu_crtc.c Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473152/ Link: https://lore.kernel.org/r/20220209172520.3719906-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: do not limit the zpos propertyDmitry Baryshkov
Stop limiting zpos property values, we use normalized_zpos anyway. And nothing stops userspace from assigning several planes to a single zpos (it is a userspace bug, but the kernel is forgiving about it). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473147/ Link: https://lore.kernel.org/r/20220209172520.3719906-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: rip out master planes supportDmitry Baryshkov
Master/virtual planes were used for multirect support. In preparation to reworking DPU planes, drop support for master planes (which was not used anyway). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/473146/ Link: https://lore.kernel.org/r/20220209172520.3719906-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: drop unused variable from dpu_kms_mdp_snapshot()Dmitry Baryshkov
Follow up the merge of address fields and drop the variable that became unused after the commit 9403f9a42c88 ("drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_map"). Fixes: 9403f9a42c88 ("drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_map") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498736/ Link: https://lore.kernel.org/r/20220822172204.281045-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: Fix comment typoJason Wang
The double `be' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/497853/ Link: https://lore.kernel.org/r/20220724204242.4107-1-wangborong@cdjrlc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: drop unused memory allocationDmitry Baryshkov
Drop the dpu_cfg variable and corresponding kzalloc, which became unused after changing hw catalog to static configuration. Fixes: de7d480f5e8c ("drm/msm/dpu: make dpu hardware catalog static const") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498738/ Link: https://lore.kernel.org/r/20220822172455.282923-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: drop VBIF indicesDmitry Baryshkov
We do not expect to have other VBIFs. Drop VBIF_n indices and always use VBIF_RT and VBIF_NRT. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489571/ Link: https://lore.kernel.org/r/20220615125703.24647-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: fix error handling around dpu_hw_vbif_initDmitry Baryshkov
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If the value is NULL, then the function will return 0 instead of a proper return code. Moreover dpu_hw_vbif_init() function can not return NULL. So, replace corresponding IS_ERR_OR_NULL() call with IS_ERR(). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489570/ Link: https://lore.kernel.org/r/20220615125703.24647-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idxDmitry Baryshkov
Remove loops over hw_vbif. Instead always VBIF's idx as an index in the array. This fixes an error in dpu_kms_hw_init(), where we fill dpu_kms->hw_vbif[i], but check for an error pointer at dpu_kms->hw_vbif[vbif_idx]. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/489569/ Link: https://lore.kernel.org/r/20220615125703.24647-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm: lookup the ICC paths in both mdp5/dpu and mdss devicesDmitry Baryshkov
The commit 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components") changed the MDP5 driver to look for the interconnect paths in the MDSS device rather than in the MDP5 device itself. This was left unnoticed since on my testing devices the interconnects probably didn't reach the sync state. Rather than just using the MDP5 device for ICC path lookups for the MDP5 devices, introduce an additional helper to check both MDP5/DPU and MDSS nodes. This will be helpful for the MDP5->DPU conversion, since the driver will have to check both nodes. Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components") Reported-by: Marijn Suijten <marijn.suijten@somainline.org> Reported-by: Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On sdm630 Tested-by: Yassine Oudjana <y.oudjana@protonmail.com> # msm8996 Patchwork: https://patchwork.freedesktop.org/patch/496488/ Link: https://lore.kernel.org/r/20220805115630.506391-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: use drm_dsc_config instead of msm_display_dsc_configDmitry Baryshkov
There is no need to use the struct msm_display_dsc_config wrapper inside the dsi driver, use the struct drm_dsc_config directly to pass pps data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/493341/ Link: https://lore.kernel.org/r/20220711100432.455268-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: use drm_dsc_config instead of msm_display_dsc_configDmitry Baryshkov
There is no need to use the struct msm_display_dsc_config wrapper inside the dpu driver, use the struct drm_dsc_config directly to pass pps data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/493340/ Link: https://lore.kernel.org/r/20220711100432.455268-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dpu: populate wb or intf before reset_intf_cfgAbhinav Kumar
dpu_encoder_helper_phys_cleanup() was not populating neither wb or intf to the intf_cfg before calling the reset_intf_cfg(). This causes the reset of the active bits of wb/intf to be skipped which is incorrect. Fix this by populating the relevant wb or intf indices correctly. Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170) Patchwork: https://patchwork.freedesktop.org/patch/494298/ Link: https://lore.kernel.org/r/1657912468-17254-1-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-13Merge tag 'drm-msm-next-2022-07-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Next for v5.20 GPU: - a619 support - Fix for unclocked GMU register access - Devcore dump enhancements Core: - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
2022-07-13Backmerge tag 'v5.19-rc6' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge in rc6 so I can merge msm next easier. Linux 5.19-rc6 Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-07-08drm/msm/dpu: Fix for non-visible planesRob Clark
Fixes `kms_cursor_crc --run-subtest cursor-offscreen`.. when the cursor moves offscreen the plane becomes non-visible, so we need to skip over it in crtc atomic test and mixer setup. Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/492819/ Link: https://lore.kernel.org/r/20220707212003.1710163-1-robdclark@gmail.com
2022-07-07drm/msm/mdp5: Fix global state lock backoffRob Clark
We need to grab the lock after the early return for !hwpipe case. Otherwise, we could have hit contention yet still returned 0. Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged in CI: WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154 Modules linked in: CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G W 5.19.0-rc2-15930-g875cc8bc536a #1 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock+0xf8/0x154 lr : drm_atomic_get_private_obj_state+0x84/0x170 sp : ffff80000cfab6a0 x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00 x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58 x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001 x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038 x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0 x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47 x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610 x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029 x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58 Call trace: drm_modeset_lock+0xf8/0x154 drm_atomic_get_private_obj_state+0x84/0x170 mdp5_get_global_state+0x54/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x2ec/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 ... ---[ end trace 0000000000000000 ]--- drm_modeset_lock attempting to lock a contended lock without backoff: drm_modeset_lock+0x148/0x154 mdp5_get_global_state+0x30/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x290/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 drm_atomic_check_only+0x4b0/0x8f4 drm_atomic_commit+0x68/0xe0 Fixes: d59be579fa93 ("drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/492701/ Link: https://lore.kernel.org/r/20220707162040.1594855-1-robdclark@gmail.com
2022-07-06drm/msm: move KMS aspace init to the separate helperDmitry Baryshkov
MDP5 and DPU drivers have the same piece of code now to initialize IOMMU and GEM address space. Move it to the msm_drv.c Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489701/ Link: https://lore.kernel.org/r/20220616081106.350262-5-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/mdp5: move iommu_domain_alloc() call close to its usageDmitry Baryshkov
Move iommu_domain_alloc() in front of adress space/IOMMU initialization. This allows us to drop final bits of struct mdp5_cfg_platform which remained from the pre-DT days. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489695/ Link: https://lore.kernel.org/r/20220616081106.350262-3-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: check both DPU and MDSS devices for the IOMMUDmitry Baryshkov
Follow the lead of MDP5 driver and check both DPU and MDSS devices for the IOMMU specifiers. Historically DPU devices had IOMMU specified in the MDSS device tree node, but as some of MDP5 devices are being converted to the supported by the DPU driver, the driver should adapt and check both devices. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489696/ Link: https://lore.kernel.org/r/20220616081106.350262-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: move struct dpu_hw_blk definition to dpu_hw_utils.hDmitry Baryshkov
There is little point in having a separate header just for a single opaque struct definition. Drop it now and move the struct to the dpu_hw_util.h header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488016/ Link: https://lore.kernel.org/r/20220601161349.1517667-5-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_mapDmitry Baryshkov
There is little point in keeping a separate MDP address and block offset in this struct. Merge them to form a new blk_addr field used for all register access. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488017/ Link: https://lore.kernel.org/r/20220601161349.1517667-4-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: drop length from struct dpu_hw_blk_reg_mapDmitry Baryshkov
We (nearly) do not use the length field from struct dpu_hw_blk_reg_map, so we can drop it safely. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488013/ Link: https://lore.kernel.org/r/20220601161349.1517667-3-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: drop xin_id from struct dpu_hw_blk_reg_mapDmitry Baryshkov
Drop the unused field xin_id. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488011/ Link: https://lore.kernel.org/r/20220601161349.1517667-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-05Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi', 'msm-next-lumag-mdp5' and 'msm-next-lumag-mdp4' into msm-next-lumag Changes in this merge: Core: - client utilization via fdinfo support - fix fence rollover issue DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes - enable DSPP support for sc7280 DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/disp/dpu1: add dspp support for sc7280Kalyan Thota
Add destination side post processing hw block support in sc7280. This hwblock enablement is necessary to support color features like CT Matix (Ex: Night Light feature) Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490382/ Link: https://lore.kernel.org/r/1655802387-15275-1-git-send-email-quic_kalyant@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp5: Add perf data for MDP v1.16Vladimir Lypak
Add the perf data for the mdp found in msm8953. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489153/ Link: https://lore.kernel.org/r/20220610225304.267508-1-luca@z3ntu.xyz Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp4: get rid of struct mdp4_platform_configDmitry Baryshkov
Struct mdp4_platform_config is a relict from the DT-conversion time. Move the max_clk field to the mdp4_kms_init(), the place where it is used and drop the struct mdp4_platform_config and the mdp4_get_config() function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485050/ Link: https://lore.kernel.org/r/20220505135008.1351533-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/mdp4: move iommu_domain_alloc() call close to its usageDmitry Baryshkov
Move iommu_domain_alloc() in front of adress space/IOMMU initialization. This allows us to drop it from struct mdp4_cfg_platform which remained from the pre-DT days. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/485049/ Link: https://lore.kernel.org/r/20220505135008.1351533-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: simplify and unify dpu_encoder_get_intf and dpu_encoder_get_wbDmitry Baryshkov
Remove extra nestting level from the dpu_encoder_get_intf(), replacing it with the explicit return in case the INTF_WB was passed to the function. While we are at it, also change dpu_encoder_get_wb() to also use explicit return rather than the goto. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/491189/ Link: https://lore.kernel.org/r/20220625003028.383259-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add interface support for CRC debugfsJessica Zhang
Add support for writing CRC values for the interface block to the debugfs by calling the necessary MISR setup/collect methods. Changes since V1: - Set values_cnt to only include phys with backing hw_intf - Loop over all drm_encs connected to crtc Changes since V2: - Remove vblank.h inclusion - Change `pos + i` to `pos + entries` - Initialize values_cnt to 0 for encoder - Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and "intf" to "enc") - Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs - Add checks for setup_misr and collect_misr in dpu_encoder_get_num_hw_intfs Changes since V3: - Remove extra whitespace - Change "enc" to "encoder" - Move crcs array to dpu_crtc_get_encoder_crc - Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490736/ Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/dpu: Add MISR register support for interfaceJessica Zhang
Add support for setting MISR registers within the interface Changes since V1: - Replaced dpu_hw_intf collect_misr and setup_misr implementations with calls to dpu_hw_utils helper methods Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/490730/ Link: https://lore.kernel.org/r/20220622171835.7558-4-quic_jesszhan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit (git 2.34.1) at 2025-06-02 02:18:53 +0000