summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dp
AgeCommit message (Collapse)Author
2024-03-04drm/msm/dp: program config ctrl for YUV420 over DPPaloma Arellano
Change relevant DP controller related programming for YUV420 cases. Program the configuration control register to indicate YUV420. Changes in v2: - Create a new patch only for configuration control programming Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579615/ Link: https://lore.kernel.org/r/20240222194025.25329-11-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: check if VSC SDP is supported in DP programmingPaloma Arellano
In the DP driver, check if VSC SDP is supported and propagate this value to dp_panel. In dp_display's dp_mode, the out_fmt_is_yuv_420 parameter must also utilize this value since YUV420 is only allowed when VSC SDP is supported. Changes in v2: - Move DP programming when VSC SDP is supported to this patch Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579625/ Link: https://lore.kernel.org/r/20240222194025.25329-9-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: store mode YUV420 information to be used by rest of DPPaloma Arellano
Wide bus is not supported when the mode is YUV420 in DP. In preparation for changing the DPU programming to reflect this, the value and assignment location of wide_bus_en for the DP submodules must be changed. Move it from boot time in dp_init_sub_modules() to run time in dp_display_mode_set. Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579614/ Link: https://lore.kernel.org/r/20240222194025.25329-8-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-03-04drm/msm/dp: rename wide_bus_en to wide_bus_supportedPaloma Arellano
Rename wide_bus_en to wide_bus_supported in dp_display_private to correctly establish that the parameter is referencing if wide bus is supported instead of enabled. Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/579613/ Link: https://lore.kernel.org/r/20240222194025.25329-7-quic_parellan@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-28Revert "drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes"Dmitry Baryshkov
This reverts commit e467e0bde881 ("drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes"). The commit changed the way how the MSM DP driver communicates HPD-related events to the userspace. The mentioned commit made some of the HPD events being reported earlier. This way userspace starts poking around. It interacts in a bad way with the dp_bridge_detect and the driver's state machine, ending up either with the very long delays during hotplug detection or even inability of the DP driver to report the display as connected. A proper fix will involve redesigning of the HPD handling in the MSM DP driver. It is underway, but it will be intrusive and can not be thought about as a simple fix for the issue. Thus, revert the offending commit. Fixes: e467e0bde881 ("drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes") Link: https://gitlab.freedesktop.org/drm/msm/-/issues/50 Reported-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/Zd3YPGmrprxv-N-O@hovoldconsulting.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Paloma Arellano <quic_parellan@quicinc.com> Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Patchwork: https://patchwork.freedesktop.org/patch/580313/ Link: https://lore.kernel.org/r/20240227220808.50146-1-dmitry.baryshkov@linaro.org
2024-02-19drm/msm/dp: Fix spelling mistake "enale" -> "enable"Colin Ian King
There is a spelling mistake in a drm_dbg_dp message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/577760/ Link: https://lore.kernel.org/r/20240212091639.2397424-1-colin.i.king@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-11drm/msm/dp: drop dp_parserDmitry Baryshkov
Finally drop separate "parsing" submodule. There is no need in it anymore. All submodules handle DT properties directly rather than passing them via the separate structure pointer. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576116/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-15-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move next_bridge handling to dp_displayDmitry Baryshkov
Remove two levels of indirection and fetch next bridge directly in dp_display_probe_tail(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576126/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-14-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move link property handling to dp_panelDmitry Baryshkov
Instead of passing link properties through the separate struct, parse them directly in the dp_panel. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576117/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-13-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move all IO handling to dp_catalogDmitry Baryshkov
Rather than parsing the I/O addresses from dp_parser and then passing them via a struct pointer to dp_catalog, handle I/O region parsing in dp_catalog and drop it from dp_parser. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576108/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-12-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: handle PHY directly in dp_ctrlDmitry Baryshkov
There is little point in going trough dp_parser->io indirection each time the driver needs to access the PHY. Store the pointer directly in dp_ctrl_private. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576119/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-11-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: remove PHY handling from dp_catalog.cDmitry Baryshkov
Inline dp_catalog_aux_update_cfg() and call phy_calibrate() from dp_aux functions directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576106/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-10-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: move phy_configure_opts to dp_ctrlDmitry Baryshkov
There is little point in sharing phy configuration structure between several modules. Move it to dp_ctrl, which becomes the only submodule re-configuring the PHY. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576124/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-9-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: split dp_ctrl_clk_enable into four functuionsDmitry Baryshkov
Split the dp_ctrl_clk_enable() beast into four functions, each of them doing just a single item: enabling or disabling core or link clocks. This allows us to cleanup the dss_module_power structure and makes several dp_ctrl functions return void. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576105/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-8-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: stop parsing clock names from DTDmitry Baryshkov
All supported platforms use the same clocks configuration. Instead of parsing names from DT in a pretty complex manner, use the static configuration. If at some point newer (or older) platforms have different clock configuration, this clock config can be moved to the device data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576115/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-7-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: simplify stream clocks handlingDmitry Baryshkov
There is only a single DP_STREAM_PM clock, stream_pixel. Instead of using a separate dss_module_power instance for this single clock, handle this clock directly. This allows us to drop several wrapping functions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576102/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-6-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: fold dp_power into dp_ctrl moduleDmitry Baryshkov
The dp_power submodule is limited to handling the clocks only following previous cleanups. Fold it into the dp_ctrl submodule, removing one unnecessary level of indirection. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576104/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-5-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: inline dp_power_(de)initDmitry Baryshkov
In preparation to cleanup of the dp_power module, inline dp_power_init() and dp_power_deinit() functions, which are now just turning the clocks on and off. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576113/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-4-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: parse DT from dp_parser_getDmitry Baryshkov
It makes little sense to split the submodule get and actual DT parsing. Call dp_parser_parse() directly from dp_parser_get(), so that the parser data is fully initialised once it is returned to the caller. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576101/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-3-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: drop unused fields from dp_power_privateDmitry Baryshkov
Drop unused and obsolete fields from struct dp_power_private. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576100/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-2-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: drop unused parser definitionsDmitry Baryshkov
Drop several unused and obsolete definitions from the dp_parser module. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/576110/ Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-1-098d5f581dd3@linaro.org
2024-02-11drm/msm/dp: remove mdss_dp_test_bit_depth_to_bpc()Kuogee Hsieh
mdss_dp_test_bit_depth_to_bpc() can be replace by mdss_dp_test_bit_depth_to_bpp() / 3. Hence remove it. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/574279/ Link: https://lore.kernel.org/r/1704993255-12753-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-02-11Merge tag 'drm-misc-next-2024-02-08' into msm-nextRob Clark
Merge the drm-misc tree to uprev MSM CI. Signed-off-by: Rob Clark <robdclark@chromium.org>
2024-01-29Merge drm/drm-next into drm-misc-nextMaxime Ripard
Kickstart 6.9 development cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-01-24drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA caseKuogee Hsieh
MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. dp_link_get_colorimetry_config() returns wrong colorimetry value in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation. Hence fix this problem by having dp_link_get_colorimetry_config() return defined CEA RGB colorimetry value in the case of DP_TEST_DYNAMIC_RANGE_CEA. Changes in V2: -- drop retrieving colorimetry from colorspace -- drop dr = link->dp_link.test_video.test_dyn_range assignment Changes in V3: -- move defined MISCr0a Colorimetry vale to dp_reg.h -- rewording commit title -- rewording commit text to more precise describe this patch Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/574888/ Link: https://lore.kernel.org/r/1705526010-597-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-01-24drm/msms/dp: fixed link clock divider bits be over written in BPC unknown caseKuogee Hsieh
Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the BPC unknown case, the additional shift causes spill over to the other bits of the [DP_CONFIGURATION_CTRL] register. Fix this by changing the return value of dp_link_get_test_bits_depth() in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT). Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/573989/ Link: https://lore.kernel.org/r/1704917931-30133-1-git-send-email-quic_khsieh@quicinc.com [quic_abhinavk@quicinc.com: fix minor checkpatch warning to align with opening braces] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-01-16ASoC: hdmi-codec: drop drm/drm_edid.h includeJani Nikula
hdmi-codec.h does not appear to directly need drm/drm_edid.h for anything. Remove it. There are some files that get drm/drm_edid.h by proxy; include it where needed. v2-v4: Fix build (kernel test robot <lkp@intel.com>) Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: linux-sound@vger.kernel.org Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: <jyri.sarha@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240104201632.1100753-3-jani.nikula@intel.com
2023-12-14drm/msm/dp: call dp_display_get_next_bridge() during probeDmitry Baryshkov
The funcion dp_display_get_next_bridge() can return -EPROBE_DEFER if the next bridge is not (yet) available. However returning -EPROBE_DEFER from msm_dp_modeset_init() is not ideal. This leads to -EPROBE return from component_bind, which can easily result in -EPROBE_DEFR loops. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # sc8180x-primus Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/566208/ Link: https://lore.kernel.org/r/20231107004424.2112698-1-dmitry.baryshkov@linaro.org
2023-12-10Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-nextRob Clark
Backmerge drm-misc-next to pick up some dependencies for drm/msm patches, in particular: https://patchwork.freedesktop.org/patch/570219/?series=127251&rev=1 https://patchwork.freedesktop.org/series/123411/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-12-08drm/msm/dp: Fix platform_get_irq() checkDan Carpenter
The platform_get_irq() function returns negative error codes. It never returns zero. Fix the check accordingly. Fixes: 82c2a5751227 ("drm/msm/dp: tie dp_display_irq_handler() with dp driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570755/ Link: https://lore.kernel.org/r/c12bb69b-d676-4345-9712-48aab48f2b48@moroto.mountain Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-08drm/msm/dp: Add DisplayPort controller for SM8650Neil Armstrong
The Qualcomm SM8650 platform comes with a DisplayPort controller with a different base offset than the previous SM8550 SoC, add support for this in the DisplayPort driver. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/571132/ Link: https://lore.kernel.org/r/20231207-topic-sm8650-upstream-dp-v1-2-b762c06965bb@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-04drm/msm/dp: add a missing unlock in dp_hpd_plug_handle()Harshit Mogalapalli
When pm_runtime_resume_and_get() fails, unlock before returning. Fixes: 5814b8bf086a ("drm/msm/dp: incorporate pm_runtime framework into DP driver") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570395/ Link: https://lore.kernel.org/r/20231204171317.192427-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()Kuogee Hsieh
Currently eDP population is done at msm_dp_modeset_init() which happen at binding time. Move eDP population to be done at display probe time so that probe deferral cases can be handled effectively. wait_for_hpd_asserted callback is added during drm_dp_aux_init() to ensure eDP's HPD is up before proceeding eDP population. Changes in v5: -- inline dp_display_auxbus_population() and delete it Changes in v4: -- delete duplicate initialize code to dp_aux before drm_dp_aux_register() -- delete of_get_child_by_name(dev->of_node, "aux-bus") and inline the function -- not initialize rc = 0 Changes in v3: -- add done_probing callback into devm_of_dp_aux_populate_bus() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570074/ Link: https://lore.kernel.org/r/1701472789-25951-8-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: delete EV_HPD_INIT_SETUPKuogee Hsieh
EV_HPD_INIT_SETUP flag is used to trigger the initialization of external DP host controller. Since external DP host controller initialization had been incorporated into pm_runtime_resume(), this flag became obsolete. msm_dp_irq_postinstall() which triggers EV_HPD_INIT_SETUP event is obsoleted accordingly. Changes in v4: -- reworded commit text -- drop EV_HPD_INIT_SETUP -- drop msm_dp_irq_postinstall() Changes in v3: -- drop EV_HPD_INIT_SETUP and msm_dp_irq_postinstall() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570075/ Link: https://lore.kernel.org/r/1701472789-25951-7-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: incorporate pm_runtime framework into DP driverKuogee Hsieh
Currently DP driver is executed independent of PM runtime framework. This leads msm eDP panel can not being detected by edp_panel driver during generic_edp_panel_probe() due to AUX DPCD read failed at edp panel driver. Incorporate PM runtime framework into DP driver so that host controller's power and clocks are enable/disable through PM runtime mechanism. Once PM runtime framework is incorporated into DP driver, waking up device from power up path is not necessary. Hence remove it. After incorporating pm_runtime framework into eDP/DP driver, dp_pm_suspend() to handle power off both DP phy and controller during suspend and dp_pm_resume() to handle power on both DP phy and controller during resume are not necessary. Therefore both dp_pm_suspend() and dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and dp_pm_runtime_resume() respectively. Changes in v9: -- silent compiler warning message at dp_power_init() and dp_power_deinit() with W1 flag Changes in v7: -- add comments to dp_pm_runtime_resume() -- add comments to dp_bridge_hpd_enable() -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() Changes in v6: -- delete dp_power_client_deinit(dp->power); -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() -- add IRQF_NO_AUTOEN to devm_request_irq() -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() Changes in v5: -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() -- squash add pm_runtime_force_suspend()/resume() patch into this patch Changes in v4: -- reworded commit text to explain why pm_framework is required for edp panel -- reworded commit text to explain autosuspend is choiced -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 -- return value from pm_runtime_resume_and_get() directly -- check return value of devm_pm_runtime_enable() -- delete pm_runtime_xxx from dp_display_remove() -- drop dp_display_host_init() from EV_HPD_INIT_SETUP -- drop both dp_pm_prepare() and dp_pm_compete() from this change -- delete ST_SUSPENDED state -- rewording commit text to add more details regrading the purpose of this change Changes in v3: -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch -- use pm_runtime_resume_and_get() instead of pm_runtime_get() -- error checking pm_runtime_resume_and_get() return value -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case -- replace dp_pm_suspend() with pm_runtime_force_suspend() -- replace dp_pm_resume() with pm_runtime_force_resume() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570073/ Link: https://lore.kernel.org/r/1701472789-25951-6-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: move parser->parse() and dp_power_client_init() to probeKuogee Hsieh
Original both parser->parse() and dp_power_client_init() are done at dp_display_bind() since eDP population is done at binding time. In the preparation of having eDP population done at probe() time, move both function from dp_display_bind() to dp_display_probe(). Changes in v6: -- move dp_power_client_deinit() to remove() Changes in v5: -- explain why parser->parse() and dp_power_client_init() are moved to probe time -- tear down sub modules if failed Changes in v4: -- split this patch out of "incorporate pm_runtime framework into DP driver" patch Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570065/ Link: https://lore.kernel.org/r/1701472789-25951-5-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changesKuogee Hsieh
Currently DP driver use drm_helper_hpd_irq_event(), bypassing drm bridge framework, to report HPD status changes to user space frame work. Replace it with drm_bridge_hpd_notify() since DP driver is part of drm bridge. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570067/ Link: https://lore.kernel.org/r/1701472789-25951-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: rename is_connected with link_readyKuogee Hsieh
The is_connected flag is set to true after DP mainlink successfully finishes link training to enter into ST_MAINLINK_READY state rather than being set after the DP dongle is connected. Rename the is_connected flag with link_ready flag to match the state of DP driver's state machine. Changes in v5: -- reworded commit text according to review comments from change #4 Changes in v4: -- reworded commit text Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570063/ Link: https://lore.kernel.org/r/1701472789-25951-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: tie dp_display_irq_handler() with dp driverKuogee Hsieh
Currently the dp_display_request_irq() is executed at msm_dp_modeset_init() which ties irq registering to the DPU device's life cycle, while depending on resources that are released as the DP device is torn down. Move register DP driver irq handler to dp_display_probe() to have dp_display_irq_handler() IRQ tied with DP device. In addition, use platform_get_irq() to retrieve irq number from platform device directly. Changes in v5: -- reworded commit text as review comments at change #4 -- tear down component if failed at dp_display_request_irq() Changes in v4: -- delete dp->irq check at dp_display_request_irq() Changes in v3: -- move calling dp_display_irq_handler() to probe Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/570069/ Link: https://lore.kernel.org/r/1701472789-25951-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-03drm/msm/dp: cleanup debugfs handlingDmitry Baryshkov
Currently there are two subdirs for DP debugfs files, e.g. DP-1, created by the drm core for the connector, and the msm_dp-DP-1, created by the DP driver itself. Merge those two, so that there are no extraneous connector-related subdirs. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/563523/ Link: https://lore.kernel.org/r/20231019104419.1032329-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-11-24Merge tag 'drm-msm-fixes-2023-11-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.7-rc3: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com
2023-11-16drm/msm/dp: attach the DP subconnector propertyDmitry Baryshkov
While developing and testing the commit bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") I had the patch [1] in my tree. I haven't noticed that it was a dependency for the commit in question. Mea culpa. Since the patch has not landed yet (and even was not reviewed) and since one of the bridges erroneously uses USB connector type instead of DP, attach the property directly from the MSM DP driver. This fixes the following oops on DP HPD event: drm_object_property_set_value (drivers/gpu/drm/drm_mode_object.c:288) dp_display_process_hpd_high (drivers/gpu/drm/msm/dp/dp_display.c:402) dp_hpd_plug_handle.isra.0 (drivers/gpu/drm/msm/dp/dp_display.c:604) hpd_event_thread (drivers/gpu/drm/msm/dp/dp_display.c:1110) kthread (kernel/kthread.c:388) ret_from_fork (arch/arm64/kernel/entry.S:858) [1] https://patchwork.freedesktop.org/patch/555530/ Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SC7280 Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/564286/ Link: https://lore.kernel.org/r/20231025092711.851168-3-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-11-16drm/msm/dp: don't touch DP subconnector property in eDP caseAbel Vesa
In case of the eDP connection there is no subconnetor and as such no subconnector property. Put drm_dp_set_subconnector_property() calls under the !is_edp condition. Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SC7280 Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/564284/ Link: https://lore.kernel.org/r/20231025092711.851168-2-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-10-23Merge tag 'drm-msm-next-2023-10-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.7 DP: - use existing helpers for DPCD handling instead of open-coded functions - set the subconnector type according to the plugged cable / dongle skip validity check for DP CTS EDID checksum DPU: - continued migration of feature flags to use core revision checks - reworked interrupts code to use '0' as NO_IRQ, removed raw IRQ indices from log / trace output gpu: - a7xx support (a730, a740) - fixes and additional speedbins for a635, a643 core: - decouple msm_drv from kms to more cleanly support headless devices (like imx5+a2xx) From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvzkBL2_OgyOeP_b6rVEjrNdfm8jcKzaB04HqHyT5jYwA@mail.gmail.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-10-23BackMerge tag 'v6.6-rc7' into drm-nextDave Airlie
This is needed to add the msm pr which is based on a higher base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-10-12drm/msm/dp: use correct lifetime device for devm_drm_bridge_addDmitry Baryshkov
The lifetime of the created drm_bridge is attached to the drm_device rather than the DP's platform_device. Use correct lifetime for devm_drm_bridge_add() call. Fixes: 61a72d5efce5 ("drm/msm/dp: switch to devm_drm_bridge_add()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562203/ Link: https://lore.kernel.org/r/20231011214705.375738-4-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dp: switch to devm_drm_bridge_add()Dmitry Baryshkov
Make MSM DP driver use devm_drm_bridge_add() instead of plain drm_bridge_add(). As the driver doesn't require any additional cleanup, stop adding created bridge to the priv->bridges array. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/561639/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-09drm/msm/dp: move pdev from struct dp_display_private to struct msm_dpDmitry Baryshkov
The dp_drm needs accessing the DP's platform device. Move pdev to the public structure. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/561642/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-09drm/msm/dp: support setting the DP subconnector typeDmitry Baryshkov
Read the downstream port info and set the subconnector type accordingly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/555531/ Link: https://lore.kernel.org/r/20230903222432.2894093-1-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dp: Remove error message when downstream port not connectedStephen Boyd
Plugging in an Apple dongle without the HDMI cable attached prints out an error message in the kernel logs when nothing is actually wrong. no downstream ports connected This is because the downstream port for the HDMI connector is not connected, so the Apple dongle reports that as a zero sink count device. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/556068/ Link: https://lore.kernel.org/r/20230906181226.2198441-3-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit (git 2.34.1) at 2025-07-24 07:35:00 +0000