Age | Commit message (Collapse) | Author |
|
In cases where implicit sync is used, it is still useful (for things
like sub-allocation, etc) to allow userspace to opt-out of implicit
sync on per-BO basis.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/514216/
Link: https://lore.kernel.org/r/20221206192123.661448-1-robdclark@gmail.com
|
|
If worker creation fails, nullify the event_thread->worker, so that
msm_drm_uninit() doesn't try accessing invalid memory location. While we
are at it, remove duplicate assignment to the ret variable.
Fixes: 1041dee2178f ("drm/msm: use kthread_create_worker instead of kthread_run")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490106/
Link: https://lore.kernel.org/r/20220617233328.1143665-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Fix another oops reproducible when rebooting the board with the Adreno
GPU working in the headless mode (e.g. iMX platforms).
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[00000000] *pgd=74936831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] ARM
CPU: 0 PID: 51 Comm: reboot Not tainted 6.2.0-rc1-dirty #11
Hardware name: Freescale i.MX53 (Device Tree Support)
PC is at msm_atomic_commit_tail+0x50/0x970
LR is at commit_tail+0x9c/0x188
pc : [<c06aa430>] lr : [<c067a214>] psr: 600e0013
sp : e0851d30 ip : ee4eb7eb fp : 00090acc
r10: 00000058 r9 : c2193014 r8 : c4310000
r7 : c4759380 r6 : 07bef61d r5 : 00000000 r4 : 00000000
r3 : c44cc440 r2 : 00000000 r1 : 00000000 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 74910019 DAC: 00000051
Register r0 information: NULL pointer
Register r1 information: NULL pointer
Register r2 information: NULL pointer
Register r3 information: slab kmalloc-1k start c44cc400 pointer offset 64 size 1024
Register r4 information: NULL pointer
Register r5 information: NULL pointer
Register r6 information: non-paged memory
Register r7 information: slab kmalloc-128 start c4759380 pointer offset 0 size 128
Register r8 information: slab kmalloc-2k start c4310000 pointer offset 0 size 2048
Register r9 information: non-slab/vmalloc memory
Register r10 information: non-paged memory
Register r11 information: non-paged memory
Register r12 information: non-paged memory
Process reboot (pid: 51, stack limit = 0xc80046d9)
Stack: (0xe0851d30 to 0xe0852000)
1d20: c4759380 fbd77200 000005ff 002b9c70
1d40: c4759380 c4759380 00000000 07bef61d 00000600 c0d6fe7c c2193014 00000058
1d60: 00090acc c067a214 00000000 c4759380 c4310000 00000000 c44cc854 c067a89c
1d80: 00000000 00000000 00000000 c4310468 00000000 c4759380 c4310000 c4310468
1da0: c4310470 c0643258 c4759380 00000000 00000000 c0c4ee24 00000000 c44cc810
1dc0: 00000000 c0c4ee24 00000000 c44cc810 00000000 0347d2a8 e0851e00 e0851e00
1de0: c4759380 c067ad20 c4310000 00000000 c44cc810 c27f8718 c44cc854 c067adb8
1e00: c4933000 00000002 00000001 00000000 00000000 c2130850 00000000 c2130854
1e20: c25fc488 00000000 c0ff162c 00000000 00000001 00000002 00000000 00000000
1e40: c43102c0 c43102c0 00000000 0347d2a8 c44cc810 c44cc814 c2133da8 c06d1a60
1e60: 00000000 00000000 00079028 c2012f24 fee1dead c4933000 00000058 c01431e4
1e80: 01234567 c0143a20 00000000 00000000 00000000 00000000 00000000 00000000
1ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1f80: 00000000 00000000 00000000 0347d2a8 00000002 00000004 00000078 00000058
1fa0: c010028c c0100060 00000002 00000004 fee1dead 28121969 01234567 00079028
1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc
1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6 600e0030 fee1dead 00000000 00000000
msm_atomic_commit_tail from commit_tail+0x9c/0x188
commit_tail from drm_atomic_helper_commit+0x160/0x188
drm_atomic_helper_commit from drm_atomic_commit+0xac/0xe0
drm_atomic_commit from drm_atomic_helper_disable_all+0x1b0/0x1c0
drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x88/0x140
drm_atomic_helper_shutdown from device_shutdown+0x16c/0x240
device_shutdown from kernel_restart+0x38/0x90
kernel_restart from __do_sys_reboot+0x174/0x224
__do_sys_reboot from ret_fast_syscall+0x0/0x1c
Exception stack(0xe0851fa8 to 0xe0851ff0)
1fa0: 00000002 00000004 fee1dead 28121969 01234567 00079028
1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc
1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6
Code: 15922088 1184421c e1500003 1afffff8 (e5953000)
---[ end trace 0000000000000000 ]---
Fixes: 0a58d2ae572a ("drm/msm: Make .remove and .shutdown HW shutdown consistent")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516909/
Link: https://lore.kernel.org/r/20230105014743.1478110-1-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
msm-next for v6.2 (the gpu/gem bits)
- Remove exclusive-fence hack that caused over-synchronization
- Fix speed-bin detection vs. probe-defer
- Enable clamp_to_idle on 7c3
- Improved hangcheck detection
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvT1h_S4d=YRgphgR8i7aMaxQaNW8mru7QaoUo9uiUk2A@mail.gmail.com
|
|
If the hangcheck timer expires, check if the fw's position in the
cmdstream has advanced (changed) since last timer expiration, and
allow it up to three additional "extensions" to it's alotted time.
The intention is to continue to catch "shader stuck in a loop" type
hangs quickly, but allow more time for things that are actually
making forward progress.
Because we need to sample the CP state twice to detect if there has
not been progress, this also cuts the the timer's duration in half.
v2: Fix typo (REG_A6XX_CP_CSQ_IB2_STAT), add comment
v3: Only halve hangcheck timer duration for generations which
support progress detection (hdanton); removed unused a5xx
progress (without knowing how to adjust for data buffered
in ROQ it is too likely to report a false negative)
v4: Comment updates to better describe the total hangcheck
duration when progress detection is applied
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com> # dEQP-GLES2.functional.flush_finish.wait
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511584/
Link: https://lore.kernel.org/r/20221114193049.1533391-3-robdclark@gmail.com
|
|
After the msm_iommu instance is created, the IOMMU domain is completely
handled inside the msm_iommu code. Move the iommu_domain_alloc() call
into the msm_iommu_new() to simplify callers code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/509615/
Link: https://lore.kernel.org/r/20221102175449.452283-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
In some cases crosvm needs a way to query the cache flags to communicate
them to the guest kernel for guest userspace mapping.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/504453/
Link: https://lore.kernel.org/r/20220923173307.2429872-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
|
|
The bridge counter was never reset when tearing down the DRM device so
that stale pointers to deallocated structures would be accessed on the
next tear down (e.g. after a second late bind deferral).
Given enough bridges and a few probe deferrals this could currently also
lead to data beyond the bridge array being corrupted.
Fixes: d28ea556267c ("drm/msm: properly add and remove internal bridges")
Fixes: a3376e3ec81c ("drm/msm: convert to drm_bridge")
Cc: stable@vger.kernel.org # 3.12
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502665/
Link: https://lore.kernel.org/r/20220913085320.8577-2-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
msm-next for v6.1
DPU:
- simplified VBIF configuration
- cleaned up CTL interfaces to accept indices rather than flush masks
DSI:
- removed unused msm_display_dsc_config struct
- switch regulator calls to new bulk API
- switched to use PANEL_BRIDGE for directly attached panels
DSI PHY:
- converted drivers to use parent_hws instead of parent_names
DP:
- cleaned up pixel_rate handling
HDMI PHY:
- turned hdmi-phy-8996 into OF clk provider
core:
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
gpu+gem:
- Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsrfrr9v1oR9S4oYfOs9jm=jbKQiwPBTrCRHrjYerJJFA@mail.gmail.com
|
|
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
Call trace:
ww_mutex_lock+0x28/0x32c
drm_modeset_lock_all_ctx+0x1b0/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Kernel Offset: 0x495d77c00000 from 0xffff800008000000
PHYS_OFFSET: 0xffffcd8500000000
CPU features: 0x800,00c2a015,19801c82
Memory Limit: none
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/497842/
Link: https://lore.kernel.org/r/20220816134612.916527-1-javierm@redhat.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Some userspace presumes that the first connected connector is the main
display, where it's supposed to display e.g. the login screen. For
laptops, this should be the main panel.
This patch call drm_helper_move_panel_connectors_to_head() after
drm_bridge_connector_init() to make sure eDP stay at head of
connected connector list. This fixes unexpected corruption happen
at eDP panel if eDP is not placed at head of connected connector
list.
Changes in v2:
-- move drm_helper_move_panel_connectors_to_head() to
dpu_kms_drm_obj_init()
Changes in v4:
-- move drm_helper_move_panel_connectors_to_head() to msm_drm_init()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: ef7837ff091c ("drm/msm/dp: Add DP controllers for sc7280")
Patchwork: https://patchwork.freedesktop.org/patch/492581/
Link: https://lore.kernel.org/r/1657135928-31195-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Intended as a way to trigger error paths in mesa.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/496710/
Link: https://lore.kernel.org/r/20220807172848.2432845-1-robdclark@gmail.com
|
|
This converts over to use the shared GEM LRU/shrinker helpers. Note
that it means we are no longer tracking purgeable or willneed buffers
that are active separately. But the most recently pinned buffers should
be at the tail of the various LRUs, and the shrinker is already prepared
to encounter objects which are still active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/496131/
Link: https://lore.kernel.org/r/20220802155152.1727594-11-robdclark@gmail.com
|
|
Otherwise if we hit reclaim pinning objects in the submit path, we'll be
blocking retire_worker trying to free a submit.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/496116/
Link: https://lore.kernel.org/r/20220802155152.1727594-4-robdclark@gmail.com
|
|
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
Call trace:
ww_mutex_lock+0x28/0x32c
drm_modeset_lock_all_ctx+0x1b0/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Kernel Offset: 0x495d77c00000 from 0xffff800008000000
PHYS_OFFSET: 0xffffcd8500000000
CPU features: 0x800,00c2a015,19801c82
Memory Limit: none
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com
|
|
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
|
|
Handle the demotion to MSM_BO_WC at the userspace ABI level, and fix
the remaining internal MSM_BO_UNCACHED user.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489339/
Link: https://lore.kernel.org/r/20220613194623.2588353-1-robdclark@gmail.com
|
|
Change msm_kms_init_aspace() to use generic function
device_iommu_mapped() instead of the fwnode-specific interface
dev_iommu_fwspec_get(). While we are at it, stop referencing
platform_bus_type directly and use the bus of the IOMMU device.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489703/
Link: https://lore.kernel.org/r/20220616081106.350262-6-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
MDP5 and DPU drivers have the same piece of code now to initialize
IOMMU and GEM address space. Move it to the msm_drv.c
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489701/
Link: https://lore.kernel.org/r/20220616081106.350262-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.
On Qualcomm platforms the IOMMU can be specified either for the MDP/DPU
device or for its parent MDSS device depending on the actual platform.
Check both of them, since that is how both DPU and MDP5 drivers work.
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/489699/
Link: https://lore.kernel.org/r/20220616081106.350262-4-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Similar to AMD commit
874442541133 ("drm/amdgpu: Add show_fdinfo() interface"), using the
infrastructure added in previous patches, we add basic client info
and GPU engine utilisation for msm.
Example output:
# cat /proc/`pgrep glmark2`/fdinfo/6
pos: 0
flags: 02400002
mnt_id: 21
ino: 162
drm-driver: msm
drm-client-id: 7
drm-engine-gpu: 1734371319 ns
drm-cycles-gpu: 1153645024
drm-maxfreq-gpu: 800000000 Hz
See also: https://patchwork.freedesktop.org/patch/468505/
v2: Add dev-maxfreq-$engine and update drm-usage-stats.rst
v3: spelling and compiler warning
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/488906/
Link: https://lore.kernel.org/r/20220609174213.2265938-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
If a GEM object is allocated, and then exported as a dma-buf fd which is
mmap'd before or without the GEM buffer being directly mmap'd, the
vma_node could be unitialized. This leads to a situation where the CPU
mapping is not correctly torn down in drm_vma_node_unmap().
Fixes: e5516553999f ("drm: call drm_gem_object_funcs.mmap with fake offset")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220531200857.136547-1-robdclark@gmail.com
|
|
As msm_drm_uninit() is called from the msm_drm_init() error path,
additional care should be necessary as not to call the free_irq() for
the IRQ that was not requested before (because an error occured earlier
than the request_irq() call).
This fixed the issue reported with the following backtrace:
[ 8.571329] Trying to free already-free IRQ 187
[ 8.571339] WARNING: CPU: 0 PID: 76 at kernel/irq/manage.c:1895 free_irq+0x1e0/0x35c
[ 8.588746] Modules linked in: pmic_glink pdr_interface fastrpc qrtr_smd snd_soc_hdmi_codec msm fsa4480 gpu_sched drm_dp_aux_bus qrtr i2c_qcom_geni crct10dif_ce qcom_stats qcom_q6v5_pas drm_display_helper gpi qcom_pil_info drm_kms_helper qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qcom_rng mdt_loader qmi_helpers phy_qcom_qmp ufs_qcom typec qnoc_sm8350 socinfo rmtfs_mem fuse drm ipv6
[ 8.624154] CPU: 0 PID: 76 Comm: kworker/u16:2 Not tainted 5.18.0-rc5-next-20220506-00033-g6cee8cab6089-dirty #419
[ 8.624161] Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT)
[ 8.641496] Workqueue: events_unbound deferred_probe_work_func
[ 8.647510] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 8.654681] pc : free_irq+0x1e0/0x35c
[ 8.658454] lr : free_irq+0x1e0/0x35c
[ 8.662228] sp : ffff800008ab3950
[ 8.665642] x29: ffff800008ab3950 x28: 0000000000000000 x27: ffff16350f56a700
[ 8.672994] x26: ffff1635025df080 x25: ffff16350251badc x24: ffff16350251bb90
[ 8.680343] x23: 0000000000000000 x22: 00000000000000bb x21: ffff16350e8f9800
[ 8.687690] x20: ffff16350251ba00 x19: ffff16350cbd5880 x18: ffffffffffffffff
[ 8.695039] x17: 0000000000000000 x16: ffffa2dd12179434 x15: ffffa2dd1431d02d
[ 8.702391] x14: 0000000000000000 x13: ffffa2dd1431d028 x12: 662d79646165726c
[ 8.709740] x11: ffffa2dd13fd2438 x10: 000000000000000a x9 : 00000000000000bb
[ 8.717111] x8 : ffffa2dd13fd23f0 x7 : ffff800008ab3750 x6 : 00000000fffff202
[ 8.724487] x5 : ffff16377e870a18 x4 : 00000000fffff202 x3 : ffff735a6ae1b000
[ 8.731851] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1635015f8000
[ 8.739217] Call trace:
[ 8.741755] free_irq+0x1e0/0x35c
[ 8.745198] msm_drm_uninit.isra.0+0x14c/0x294 [msm]
[ 8.750548] msm_drm_bind+0x28c/0x5d0 [msm]
[ 8.755081] try_to_bring_up_aggregate_device+0x164/0x1d0
[ 8.760657] __component_add+0xa0/0x170
[ 8.764626] component_add+0x14/0x20
[ 8.768337] dp_display_probe+0x2a4/0x464 [msm]
[ 8.773242] platform_probe+0x68/0xe0
[ 8.777043] really_probe.part.0+0x9c/0x28c
[ 8.781368] __driver_probe_device+0x98/0x144
[ 8.785871] driver_probe_device+0x40/0x140
[ 8.790191] __device_attach_driver+0xb4/0x120
[ 8.794788] bus_for_each_drv+0x78/0xd0
[ 8.798751] __device_attach+0xdc/0x184
[ 8.802713] device_initial_probe+0x14/0x20
[ 8.807031] bus_probe_device+0x9c/0xa4
[ 8.810991] deferred_probe_work_func+0x88/0xc0
[ 8.815667] process_one_work+0x1d0/0x320
[ 8.819809] worker_thread+0x14c/0x444
[ 8.823688] kthread+0x10c/0x110
[ 8.827036] ret_from_fork+0x10/0x20
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/485422/
Link: https://lore.kernel.org/r/20220507010021.1667700-1-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Add explicit include of drm_bridge.h to the msm_drv.c to fix the
following warning:
drivers/gpu/drm/msm/msm_drv.c:236:17: error: implicit declaration of function 'drm_bridge_remove'; did you mean 'drm_bridge_detach'? [-Werror=implicit-function-declaration]
Fixes: d28ea556267c ("drm/msm: properly add and remove internal bridges")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/484310/
Link: https://lore.kernel.org/r/20220430180917.3819294-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by
the driver. This fixes the following warning.
WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xc8/0x1e8
__warn from warn_slowpath_fmt+0x78/0xa8
warn_slowpath_fmt from __mutex_lock+0x840/0x9f4
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84
drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c
msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c
mdp4_kms_init from msm_drm_bind+0x514/0x698
msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc
try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8
component_master_add_with_match from msm_pdev_probe+0x274/0x350
msm_pdev_probe from platform_probe+0x5c/0xbc
platform_probe from really_probe.part.0+0x9c/0x290
really_probe.part.0 from __driver_probe_device+0xa8/0x13c
__driver_probe_device from driver_probe_device+0x34/0x10c
driver_probe_device from __driver_attach+0xbc/0x178
__driver_attach from bus_for_each_dev+0x74/0xc0
bus_for_each_dev from bus_add_driver+0x160/0x1e4
bus_add_driver from driver_register+0x88/0x118
driver_register from do_one_initcall+0x6c/0x334
do_one_initcall from kernel_init_freeable+0x1bc/0x220
kernel_init_freeable from kernel_init+0x18/0x12c
kernel_init from ret_from_fork+0x14/0x2c
Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/481778/
Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The msm_mdss serves several roles at this moment. It provides IRQ domain
used by MDP5 and DPU drivers but it also serves as a component master
for both those usecases. MDP4 (which does not have separate MDSS device)
is the component master on it's own.
Remove this assymmetry and make both MDP5 and DPU component masters too.
This removes a need to care about drm/components from msm_mdss driver,
removes an mdss pointer from struct msm_drm_private and simplifies the
interface between mdp5/dpu and msm_drv.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482512/
Link: https://lore.kernel.org/r/20220419155346.1272627-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Let's make the match's data pointer a (sub-)driver's private data. The
only user currently is the msm_drm_init() function, using this data to
select kms_init callback. Pass this callback through the driver's
private data instead.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482510/
Link: https://lore.kernel.org/r/20220419155346.1272627-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Currently the msm platform driver is a multiplex handling several cases:
- headless GPU-only driver,
- MDP4 with flat device nodes,
- MDP5/DPU MDSS with all the nodes being children of MDSS node.
This results in not-so-perfect code, checking the hardware version
(MDP4/MDP5/DPU) in several places, checking for mdss even when it can
not exist, etc. Split the code into three handling subdrivers (mdp4,
mdss and headless msm).
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482507/
Link: https://lore.kernel.org/r/20220419155346.1272627-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Since now there is just one mdss subdriver, drop all the indirection,
make msm_mdss struct completely opaque (and defined inside msm_mdss.c)
and call mdss functions directly.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482505/
Link: https://lore.kernel.org/r/20220419155346.1272627-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
MDP5 and DPU1 both provide the driver handling the MDSS region, which
handles the irq domain and (incase of DPU1) adds some init for the UBWC
controller. Unify those two pieces of code into a common driver.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482506/
Link: https://lore.kernel.org/r/20220419155346.1272627-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The motivation at this point is mainly native userspace mesa driver in a
VM guest. The one remaining synchronous "hotpath" is buffer allocation,
because guest needs to wait to know the bo's iova before it can start
emitting cmdstream/state that references the new bo. By allocating the
iova in the guest userspace, we no longer need to wait for a response
from the host, but can just rely on the allocation request being
processed before the cmdstream submission. Allocation failures (OoM,
etc) would just be treated as context-lost (ie. GL_GUILTY_CONTEXT_RESET)
or subsequent allocations (or readpix, etc) can raise GL_OUT_OF_MEMORY.
v2: Fix inuse check
v3: Change mismatched iova case to -EBUSY
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220411215849.297838-11-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The 64b value field is already suffient to hold a pointer instead of
immediate, but we also need a length field.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220317165144.222101-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Follow-up pull req for v5.18 to pull in some important fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwHFHEd+9df-0aBOCfmw+ULvTS3f18sJuq_cvGKLDSjw@mail.gmail.com
|
|
Add a way for userspace to specify the sequence number fence used to
track completion of the submit. As the seqno fence is simply an
incrementing counter which is local to the submitqueue, it is easy for
userspace to know the next value.
This is useful for native userspace drivers in a vm guest, as the guest
to host roundtrip can have high latency. Assigning the fence seqno in
the guest userspace allows the guest to continue without waiting for
response from the host.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com
|
|
Add a SYSPROF param for system profiling tools like Mesa's pps-producer
(perfetto) to control behavior related to system-wide performance
counter collection. In particular, for profiling, one wants to ensure
that GPU context switches do not effect perfcounter state, and might
want to suppress suspend (which would cause counters to lose state).
v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and
initialize the sysprof_active refcount to one (because the under/
overflow checking in refcount_t doesn't expect a 0->1 transition)
meaning that values greater than 1 means sysprof is active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com
|
|
It was always expected to have a use for this some day, so we left a
placeholder. Now we do. (And I expect another use in the not too
distant future when we start allowing userspace to allocate GPU iova.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
We're experimenting a bit with the process this time, with Dmitry
collecting display patches and merging them into msm-next with me
handling the gpu/etc side of things. Summary of interesting new bits
and pieces
* dpu + dp support for sc8180x
* dp support for sm8350
* dpu + dsi support for qcm2290
* 10nm dsi phy tuning support
* bridge support for dp encoder
* gpu support for additional 7c3 SKUs
* assorted cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com
|
|
We need the driver core fix in here as well for future changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the common compare helper from component.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-10-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Add compatibility for QCM2290 display subsystem, including
required entries in DPU hw catalog.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474087/
Link: https://lore.kernel.org/r/1644852547-10067-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Prep work for next patch.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220201161618.778455-2-robdclark@gmail.com
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
|
|
Add SC8180x to the hardware catalog, for initial support for the
platform. Due to limitations in the DP driver only one of the four DP
interfaces is left enabled.
The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
is flagged appropriately to ensure widebus is disabled - for now.
Signed-off-by: Rob Clark <robdclark@chromium.org>
[bjorn: Reworked intf and irq definitions]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Bringup functionality for MSM8998 in the DPU, driver which is mostly
the same as SDM845 (just a few variations).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220113145111.29984-3-jami.kettunen@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Move clock/IO/hrtimer utility functions from msm_drv.c to new
msm_io_utils.c file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20220119221616.3089119-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
With the reglog removal, msm_readl/_writel became single line wrappers
around readl/writel. Move those two wrappers and msm_rmw to msm_drv.h to
remove need for extra function calls when doing register writes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
msm_ioremap() functions take additional argument dbgname which is now
unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|