summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)Author
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-09drm/panel: decouple connector from drm_panelSam Ravnborg
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Sean Paul <seanpaul@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org
2019-12-09drm: Stop accessing encoder->bridge directlyBoris Brezillon
We are about to replace the single-linked bridge list by a double-linked one based on list.h, leading to the suppression of the encoder->bridge field. But before we can do that we must provide a drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers and core helpers to use it instead of directly accessing encoder->bridge. Note that we still have 2 drivers (VC4 and Exynos) manipulating the encoder->bridge field directly because they need to cut the bridge chain in order to control the enable/disable sequence. This is definitely not something we want to encourage, so let's keep those 2 oddities around until we find a better solution. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-4-boris.brezillon@collabora.com
2019-12-05drm: constify fb ops across all driversJani Nikula
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/59b43629ac60031c5bbf961d8c49695019bc9c6f.1575390740.git.jani.nikula@intel.com
2019-12-02Merge tag 'drm-msm-next-2019-11-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next + OCMEM support to enable the couple generations that had shared OCMEM rather than GMEM exclusively for the GPU (late a3xx and I think basically all of a4xx). Bjorn and Brian decided to land this through the drm tree to avoid having to coordinate merge requests. + a510 support, and various associated display support + the usual misc cleanups and fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGv-JWswEJRxe5AmnGQO1SZnpxK05kO1E29K6UUzC9GMMw@mail.gmail.com
2019-12-01drm/msm: fix opencoded use of drm_panel_*Sam Ravnborg
Use the function drm_panel_get_modes(). Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Enrico Weigelt <info@metux.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-7-sam@ravnborg.org
2019-11-21drm/msm: Don't init ww_mutec acquire ctx before neededDaniel Vetter
For locking semantics it really doesn't matter when we grab the ticket. But for lockdep validation it does: the acquire ctx is a fake lockdep. Since other drivers might want to do a full multi-lock dance in their fault-handler, not just lock a single dma_resv. Therefore we must init the acquire_ctx only after we've done all the copy_*_user or anything else that might trigger a pagefault. For msm this means we need to move it past submit_lookup_objects. Aside: Why is msm still using struct_mutex, it seems to be using dma_resv_lock for general buffer state protection? v2: - Add comment to explain why the ww ticket setup is separate (Rob) - Fix up error handling, we need to make sure we don't call ww_acquire_fini without _init. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-and-tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20191120105607.3023-1-daniel.vetter@ffwll.ch
2019-11-13drm/msm: fix memleak on releaseJohan Hovold
If a process is interrupted while accessing the "gpu" debugfs file and the drm device struct_mutex is contended, release() could return early and fail to free related resources. Note that the return value from release() is ignored. Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Cc: stable <stable@vger.kernel.org> # 4.18 Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
2019-11-07drm/msm/hdmi: Provide ddc symlink in hdmi connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/ <1e343b02195757bfbf60ca8999cadeb376db204e.1566845537.git.andrzej.p@collabora.com
2019-11-06drm: msm: a6xx: fix debug bus register configurationSharat Masetty
Fix the cx debugbus related register configuration, to collect accurate bus data during gpu snapshot. This helps with complete snapshot dump and also complete proper GPU recovery. Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/339165
2019-11-04drm/msm/adreno: Add support for Adreno 510 GPUAngeloGioacchino Del Regno
The Adreno 510 GPU is a stripped version of the Adreno 5xx, found in low-end SoCs like 8x56 and 8x76, which has 256K of GMEM, with no GPMU nor ZAP. Also, since the Adreno 5xx part of this driver seems to be developed with high-end Adreno GPUs in mind, and since this is a lower end one, add a comment making clear which GPUs which support is not implemented yet is not using the GPMU related hw init code, so that future developers will not go crazy with that. By the way, the lower end Adreno GPUs with no GPMU are: A505/A506/A510 (usually no ZAP firmware) A508/A509/A512 (usually with ZAP firmware) Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-04drm/msm/dsi: Add configuration for 8x76AngeloGioacchino Del Regno
MSM8976, MSM8976 and APQ variants have DSI version 3:10040002 (DSI 6G V1.4.2), featuring two DSIs. They need three clocks (mdp_core, iface, bus), one GDSC and two vregs, VDDA at 1.2V and VDDIO at 1.8V. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-04drm/msm/dsi: Add configuration for 28nm PLL on family BAngeloGioacchino Del Regno
The 28nm PLL has a different iospace on MSM/APQ family B SoCs: add a new configuration and use it when the DT reports the "qcom,dsi-phy-28nm-hpm-fam-b" compatible. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-04drm/msm/mdp5: Add configuration for msm8x76AngeloGioacchino Del Regno
Add the configuration entries for the MDP5 v1.11, found on MSM8956, MSM8976 and APQ variants. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-02drm/msm/mdp5: Add optional TBU and TBU_RT clocksAngeloGioacchino Del Regno
Some SoCs, like MSM8956/8976 (and APQ variants), do feature these clocks and we need to enable them in order to get both of the hw (mdp5/rot) Translation Buffer Units (TBUs) to properly work. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-02drm/msm: always dump buffer base/sizeRob Clark
Even if we are not dumping the buffer's contents, it is useful to log their base address and size. This makes it easier to see when different gpu pointers point to a single buffer, for example higher mipmap levels of a single texture. Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-02drm/msm: fix rd dumping for split-IB1Rob Clark
When IB1 is split into multiple cmd buffers, we'd emit multiple RD_CMDSTREAM_ADDR per submit. But after this packet is handled by the cffdump parser, it resets it's known buffers on the next GPUADDR packet, so subsequent RD_CMDSTREAM_ADDR packets from the same submit would not find their buffers. Re-work the loop to snapshot all buffers before RD_CMDSTREAM_ADDR to avoid this problem. Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-11-02drm/msm/hdmi: silence -EPROBE_DEFER warningBrian Masney
Silence a warning message due to an -EPROBE_DEFER error to help cleanup the system boot log. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-24drm/msm/dsi: Implement qcom, dsi-phy-regulator-ldo-mode for 28nm PHYStephan Gerhold
The DSI PHY regulator supports two regulator modes: LDO and DCDC. This mode can be selected using the "qcom,dsi-phy-regulator-ldo-mode" device tree property. However, at the moment only the 20nm PHY driver actually implements that option. Add a check in the 28nm PHY driver to program the registers correctly for LDO mode. Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # l8150 Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191023165617.28738-1-stephan@gerhold.net
2019-10-23drm/msm: edp: Avoid drm_dp_link helpersThierry Reding
During the discussion of patches that enhance the drm_dp_link helpers it was concluded that these helpers aren't very useful to begin with. Start pushing the equivalent code into individual drivers to ultimately remove them. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-12-thierry.reding@gmail.com
2019-10-23Merge v5.4-rc4 into drm-nextDaniel Vetter
Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol value") to be able to merge his dp_link patch series. Some adjacent changes conflicts, plus some clashes in i915 due to cherry-picking and git trying to be helpful and leaving both versions in. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-10-11drm/msm/dsi: Implement reset correctlyJeffrey Hugo
On msm8998, vblank timeouts are observed because the DSI controller is not reset properly, which ends up stalling the MDP. This is because the reset logic is not correct per the hardware documentation. The documentation states that after asserting reset, software should wait some time (no indication of how long), or poll the status register until it returns 0 before deasserting reset. wmb() is insufficient for this purpose since it just ensures ordering, not timing between writes. Since asserting and deasserting reset occurs on the same register, ordering is already guaranteed by the architecture, making the wmb extraneous. Since we would define a timeout for polling the status register to avoid a possible infinite loop, lets just use a static delay of 20 ms, since 16.666 ms is the time available to process one frame at 60 fps. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Cc: Hai Li <hali@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Sean Paul <sean@poorly.run> [seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.com
2019-10-10drm/msm/mdp5: make config variables staticBen Dooks
A number of the config structs are not exported so make them static to avoid the following sparse warnings: drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:17:26: warning: symbol 'msm8x74v1_config' was not declared. Should it be static? drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:101:26: warning: symbol 'msm8x74v2_config' was not declared. Should it be static? drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:183:26: warning: symbol 'apq8084_config' was not declared. Should it be static? drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:278:26: warning: symbol 'msm8x16_config' was not declared. Should it be static? drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:345:26: warning: symbol 'msm8x94_config' was not declared. Should it be static? drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:440:26: warning: symbol 'msm8x96_config' was not declared. Should it be static? drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:548:26: warning: symbol 'msm8917_config' was not declared. Should it be static? drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:633:26: warning: symbol 'msm8998_config' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191009120522.17019-1-ben.dooks@codethink.co.uk Link: https://patchwork.freedesktop.org/patch/msgid/20190918195722.2149227-1-arnd@arndb.de
2019-10-10drm/msm: make a5xx_show and a5xx_gpu_state_put staticBen Dooks
The a5xx_show and a5xx_gpu_state_put objects are not exported outside of the file, so make them static to avoid the following warnings from sparse: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1292:5: warning: symbol 'a5xx_gpu_state_put' was not declared. Should it be static? drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1302:6: warning: symbol 'a5xx_show' was not declared. Should it be static? Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191009114607.701-1-ben.dooks@codethink.co.uk
2019-10-10drm/msm/mdp5: Remove set but not used variable 'hw_cfg' in modeset_initzhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c: In function modeset_init: drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:458:28: warning: variable hw_cfg set but not used [-Wunused-but-set-variable] It is not used since commit 36d1364abbed ("drm/msm/mdp5: Clean up interface assignment") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570630403-92371-1-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/dsi: Remove set but not used variable 'lp'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/dsi/dsi_host.c: In function dsi_cmd_dma_rx: drivers/gpu/drm/msm/dsi/dsi_host.c:1302:7: warning: variable lp set but not used [-Wunused-but-set-variable] It is not used since commit a689554ba6ed ("drm/msm: Initial add DSI connector support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-5-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/dsi: Remove set but not used variable 'lpx'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c: In function msm_dsi_dphy_timing_calc_v2: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:156:17: warning: variable lpx set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c: In function msm_dsi_dphy_timing_calc_v3: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:273:17: warning: variable lpx set but not used [-Wunused-but-set-variable] 'lpx' in msm_dsi_dphy_timing_calc_v2 is not used since commit a4df68fa232e ("drm/msm/dsi: Add new method to calculate 14nm PHY timings") 'lpx' in msm_dsi_dphy_timing_calc_v3 is not used since commit f1fa7ff44056 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-4-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/mdp5: Remove set but not used variable 'hw_cfg' in blend_setupzhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c: In function blend_setup: drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:225:28: warning: variable hw_cfg set but not used [-Wunused-but-set-variable] It is not used since commit 14be3200cd5f ("drm/msm: rename mdp->disp") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-3-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm/mdp5: Remove set but not used variable 'fmt'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function mdp5_smp_calculate: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:134:6: warning: variable fmt set but not used [-Wunused-but-set-variable] It is not used since commit 24c478ead0bf ("drm/fourcc: Pass the format_info pointer to drm_format_plane_cpp") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-2-git-send-email-zhengbin13@huawei.com
2019-10-10drm/msm: Sanitize the modeset_is_locked checks in dpuSean Paul
As Daniel mentions in his email [1], non-blocking commits don't hold the modeset locks, so we can safely access state as long as these functions are in the commit path. So remove the WARN_ON in dpu_kms_encoder_enable. In dpu_crtc_get_intf_mode, things are a bit more complicated. So keep the WARN_ON, but add a comment explaining the situation and hope someone comes along and fixes the issue. [1]- https://lists.freedesktop.org/archives/dri-devel/2019-October/239441.html Link to v1: https://patchwork.freedesktop.org/patch/msgid/20191010151351.126735-1-sean@poorly.run Changes in v2: - Restored the WARN_ON in get_intf_mode and added a clarifying comment (Daniel) Fixes: 1dfdb0e107db ("drm/msm: dpu: Add modeset lock checks where applicable") Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Rob Clark <robdclark@chromium.org> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191010181801.186069-1-sean@poorly.run
2019-10-07drm/msm/dpu: Remove set but not used variables 'mode', 'dpu_kms', 'priv'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function dpu_encoder_virt_disable: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1199:27: warning: variable mode set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function _dpu_encoder_init_debugfs: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1963:18: warning: variable dpu_kms set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function dpu_encoder_frame_done_timeout: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:2183:26: warning: variable priv set but not used [-Wunused-but-set-variable] They are not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variables 'cmd_enc', 'priv'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_ctl_start_irq: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:136:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_irq_control: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:328:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_tearcheck_config: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:367:26: warning: variable priv set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_wait_for_tx_complete: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:662:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable] They are not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variables 'dpu_cstate', 'priv'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function dpu_core_perf_crtc_release_bw: drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:248:25: warning: variable dpu_cstate set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function dpu_core_perf_crtc_update: drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:337:26: warning: variable priv set but not used [-Wunused-but-set-variable] They are not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variable 'priv' in dpu_core_irq.czhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c: In function dpu_core_irq_preinstall: drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c:354:26: warning: variable priv set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c: In function dpu_core_irq_uninstall: drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c:390:26: warning: variable priv set but not used [-Wunused-but-set-variable] It is not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variable 'priv' in dpu_encoder_phys_vid.czhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c: In function dpu_encoder_phys_vid_disable: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:566:26: warning: variable priv set but not used [-Wunused-but-set-variable] It is not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove set but not used variable 'priv' in dpu_kms.czhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_danger_signal_status: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:80:26: warning: variable priv set but not used [-Wunused-but-set-variable] drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_prepare_commit: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:271:26: warning: variable priv set but not used [-Wunused-but-set-variable] It is not used since commit 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm: include linux/sched/task.hArnd Bergmann
Without this header file, compile-testing may run into a missing declaration: drivers/gpu/drm/msm/msm_gpu.c:444:4: error: implicit declaration of function 'put_task_struct' [-Werror,-Wimplicit-function-declaration] Fixes: 482f96324a4e ("drm/msm: Fix task dump in gpu recovery") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dsi: Move static keyword to the front of declarationsKrzysztof Wilczynski
Move the static keyword to the front of declarations of msm_dsi_v2_host_ops, msm_dsi_6g_host_ops and msm_dsi_6g_v2_host_ops, and resolve the following compiler warnings that can be seen when building with warnings enabled (W=1): drivers/gpu/drm/msm/dsi/dsi_cfg.c:150:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] drivers/gpu/drm/msm/dsi/dsi_cfg.c:161:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] drivers/gpu/drm/msm/dsi/dsi_cfg.c:172:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm: Remove unused function argumentsDrew Davenport
The arguments related to IOMMU port name have been unused since commit 944fc36c31ed ("drm/msm: use upstream iommu") and can be removed. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
dpu_kms.dev will never be NULL, so don't bother checking. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
msm_drm_private.kms will only be NULL in the dummy headless case, so there is no need to check it in the dpu display driver. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
drm_crtc.dev will never be NULL, so no need to check it. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unnecessary NULL checksDrew Davenport
drm_device.dev_private is set to a non-NULL msm_drm_private struct in msm_drm_init. Successful initialization of msm means that dev_private is non-NULL so there is no need to check it everywhere. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unused macroDrew Davenport
Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/dpu: Remove unused variablesDrew Davenport
Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm/gpu: add ocmem init/cleanup functionsBrian Masney
The files a3xx_gpu.c and a4xx_gpu.c have ifdefs for the OCMEM support that was missing upstream. Add two new functions (adreno_gpu_ocmem_init and adreno_gpu_ocmem_cleanup) that removes some duplicated code. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-03Merge drm/drm-next into drm-misc-nextMaxime Ripard
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-02drm/msm: use drm_debug_enabled() to check for debug categoriesJani Nikula
Allow better abstraction of the drm_debug global variable in the future. No functional changes. v2: Move unlikely() to drm_debug_enabled() Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c7142cdebb5f6fed527272b333cd6c43c0aa68ec.1569329774.git.jani.nikula@intel.com
2019-09-04drm/msm: Use the correct dma_sync calls harderRob Clark
Looks like the dma_sync calls don't do what we want on armv7 either. Fixes: Unable to handle kernel paging request at virtual address 50001000 pgd = (ptrval) [50001000] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc6-00271-g9f159ae07f07 #4 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at v7_dma_clean_range+0x20/0x38 LR is at __dma_page_cpu_to_dev+0x28/0x90 pc : [<c011c76c>] lr : [<c01181c4>] psr: 20000013 sp : d80b5a88 ip : de96c000 fp : d840ce6c r10: 00000000 r9 : 00000001 r8 : d843e010 r7 : 00000000 r6 : 00008000 r5 : ddb6c000 r4 : 00000000 r3 : 0000003f r2 : 00000040 r1 : 50008000 r0 : 50001000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 70004019 DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: 3de433c5b38a ("drm/msm: Use the correct dma_sync calls in msm_gem") Tested-by: Fabio Estevam <festevam@gmail.com>
2019-09-04drm/msm: remove unlikely() from WARN_ON() conditionsDenis Efremov
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely() internally. Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit (git 2.34.1) at 2025-04-15 03:27:43 +0000